HP-SN-MPLS-LSR-MIB
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, RFC 3031, January 2001.
Main OID:
mplsLsrMIB.1.3.6.1.4.1.1991.1.2.15.15.2
98
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
mplsLsrMIBThis MIB contains managed object definitions for the
Multiprotocol Label Switching (MPLS) Router as
defined in: Rosen, E., Viswanathan, A., and R.
Callon, Multiprotocol Label Switching Architecture,
RFC 3031, January 2001. MODULE-IDENTITY .1.3.6.1.4.1.1991.1.2.15.15.2 |
mplsLsrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.15.2.1 |
mplsInterfaceConfTableThis table specifies per-interface MPLS capability
and associated information. SEQUENCE OF MplsInterfaceConfEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.1 |
mplsInterfaceConfEntryAn entry in this table is created by an LSR for
every interface capable of supporting MPLS. Each
entry in this table will exist only if a
corresponding entry in ifTable exists. If the
associated entry in ifTable is deleted, the
corresponding entry in this table must also be
deleted shortly thereafter. The entry with index 0
represents the per-platform label space and contains
parameters that apply to all interfaces that
participate in the per-platform label space. Other
entries defined in this table represent additional
MPLS interfaces that may participate in either the
per-platform or per-interface label spaces, or both.
Additional information about label space
participation of an interface is provided in the
description clause of
mplsInterfaceLabelParticipationType. MplsInterfaceConfEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1 |
mplsInterfaceConfIndexThis is a unique index for an entry in the
MplsInterfaceConfTable. A non-zero index for an
entry indicates the ifIndex for the corresponding
interface entry in of the MPLS-layer in the ifTable.
Note that the per-platform label space may apply to
several interfaces, and therefore the configuration
of the per-platform label space interface parameters
will apply to all of the interfaces that are
participating in the per-platform label space. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1.1 |
mplsInterfaceLabelMinInThis is the minimum value of an MPLS label that this
LSR is willing to receive on this interface.ro MplsLabel (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1.2 |
mplsInterfaceLabelMaxInThis is the maximum value of an MPLS label that this
LSR is willing to receive on this interface.ro MplsLabel (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1.3 |
mplsInterfaceLabelMinOutThis is the minimum value of an MPLS label that this
LSR is willing to send on this interface.ro MplsLabel (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1.4 |
mplsInterfaceLabelMaxOutThis is the maximum value of an MPLS label that this
LSR is willing to send on this interface.ro MplsLabel (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1.5 |
mplsInterfaceTotalBandwidthThis value indicates the total amount of usable
bandwidth on this interface and is specified in
kilobits per second (Kbps). This variable is not
applicable when applied to the interface with index
0. When this value cannot be measured, this value
should contain the nominal bandwidth.ro MplsBitRate (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1.6 |
mplsInterfaceAvailableBandwidthThis value indicates the total amount of available
bandwidth available on this interface and is
specified in kilobits per second (Kbps). This value
is calculated as the difference between the amount
of bandwidth currently in use and that specified in
mplsInterfaceTotalBandwidth. This variable is not
applicable when applied to the interface with index
0. When this value cannot be measured, this value
should contain the nominal bandwidth.ro MplsBitRate (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1.7 |
mplsInterfaceLabelParticipationTypeEither the perPlatform(0) or perInterface(1) bit
MUST be set. If the value of the
mplsInterfaceConfIndex for this entry is zero, then
only the perPlatform(0) bit MUST be set and the
perInterface(1) bit is meaningless. If the
perInterface(1) bit is set then the value of
mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn,
mplsInterfaceLabelMinOut, and
mplsInterfaceLabelMaxOut for this entry reflect the
label ranges for this interface. If only the
perPlatform(0) bit is set, then the value of
mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn,
mplsInterfaceLabelMinOut, and
mplsInterfaceLabelMaxOut for this entry must be
identical to the instance of these objects with
index 0.ro Bits .1.3.6.1.4.1.1991.1.2.15.15.2.1.1.1.8 |
mplsInterfacePerfTableThis table provides MPLS performance information on
a per-interface basis. SEQUENCE OF MplsInterfacePerfEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.2 |
mplsInterfacePerfEntryAn entry in this table is created by the LSR for
every interface capable of supporting MPLS. Its is
an extension to the mplsInterfaceConfEntry table. MplsInterfacePerfEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.2.1 |
mplsInterfaceInLabelsUsedThis object counts the number of labels that are in
use at this point in time on this interface in the
incoming direction. If the interface participates in
the per-platform label space only, then this
instance of this object MUST be identical with the
instance with index 0. If the interface participates
in the per-interface label space, then this instance
of this object MUST represent the number of of per-
interface labels that are in use at this point in
time on this interface.ro Gauge32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.2.1.1 |
mplsInterfaceFailedLabelLookupThis object counts the number of labeled packets
that have been received on this interface and were
discarded because there was no matching cross-
connect entry. This object MUST count on a per-
interface basis regardless of which label space the
interface participates in.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.2.1.2 |
mplsInterfaceOutLabelsUsedThis object counts the number of top-most labels in
the outgoing label stacks that are in use at this
point in time on this interface. This object MUST
count on a per-interface basis regardless of which
label space the interface participates in.ro Gauge32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.2.1.3 |
mplsInterfaceOutFragmentsThis object counts the number of outgoing MPLS
packets that required fragmentation before
transmission on this interface. This object MUST
count on a per-interface basis regardless of which
label space the interface participates in.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.2.1.4 |
mplsInSegmentTableThis table contains a collection of incoming
segments to an LSR. SEQUENCE OF MplsInSegmentEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.3 |
mplsInSegmentEntryAn entry in this table represents one incoming
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The creator of the entry is denoted by
mplsInSegmentOwner. An entry in this table is
indexed by the ifIndex of the incoming interface and
the (top) label. The value of mplsInSegmentRowStatus
cannot be active(1)unless the ifTable entry
corresponding to mplsInSegmentIfIndex exists. MplsInSegmentEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1 |
mplsInSegmentIfIndexThis is a unique index for an entry in the
MplsInSegmentTable. This value represents the
interface index for the incoming MPLS interface. A
value of zero represents an incoming label from the
per-platform label space. In this case, the
mplsInSegmentLabel is interpreted to be an MPLS-type
label. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.1 |
mplsInSegmentLabelThe incoming label for this segment. MplsLabel (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.2 |
mplsInSegmentNPopThe number of labels to pop from the incoming
packet. Normally only the top label is popped from
the packet and used for all switching decisions for
that packet. Note that technologies which do not
support label popping should set this value to its
default value of 1. This object cannot be modified
if mplsInSegmentRowStatus is active(1).rw Integer32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.3 |
mplsInSegmentAddrFamilyThe IANA address family [IANAFamily] of the incoming
packet. A value of other(0) indicates that the
family type is either unknown or undefined. This
object cannot be modified if mplsInSegmentRowStatus
is active(1).rw AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.4 |
mplsInSegmentXCIndexIndex into mplsXCTable which identifies which cross-
connect entry this segment is part of. A value of
zero indicates that this entry is not referred to by
any cross-connect entry. When a cross-connect entry
is created which this in-segment is a part of, this
object is automatically updated to reflect the value
of mplsXCIndex of that cross-connect entry.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.5 |
mplsInSegmentOwnerDenotes the entity that created and is responsible
for managing this segment. This object cannot be
modified if mplsInSegmentRowStatus is active(1).rw MplsInitialCreationSource (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.6 |
mplsInSegmentTrafficParamPtrThis variable represents a pointer to the traffic
parameter specification for this in-segment. This
value may point at an entry in the
mplsTrafficParamTable to indicate which
mplsTrafficParamEntry is to be assigned to this
segment. This value may optionally point at an
externally defined traffic parameter specification
table. A value of zero-dot-zero indicates best-effort
treatment. By having the same value of this object,
two or more segments can indicate resource sharing.
This object cannot be modified if
mplsInSegmentRowStatus is active(1).rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.7 |
mplsInSegmentRowStatusThis variable is used to create, modify, and/or
delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.8 |
mplsInSegmentStorageTypeThis variable indicates the storage type for this
object. This object cannot be modified if
mplsInSegmentRowStatus is active(1). If this
variable is set to readOnly(5), and the
corresponding TFIB entry is removed, then the agent
must remove this row shortly thereafter.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.3.1.9 |
mplsInSegmentPerfTableThis table contains statistical information for
incoming MPLS segments to an LSR. SEQUENCE OF MplsInSegmentPerfEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.4 |
mplsInSegmentPerfEntryAn entry in this table contains statistical
information about one incoming segment which was
configured in the mplsInSegmentTable. The counters
in this entry should behave in a manner similar to
that of the interface. MplsInSegmentPerfEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.4.1 |
mplsInSegmentOctetsThis value represents the total number of octets
received by this segment.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.4.1.1 |
mplsInSegmentPacketsTotal number of packets received by this segment.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.4.1.2 |
mplsInSegmentErrorsThe number of errored packets received on this
segment.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.4.1.3 |
mplsInSegmentDiscardsThe number of labeled packets received on this in-
segment, which were chosen to be discarded even
though no errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a labeled packet could be to free up
buffer space.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.4.1.4 |
mplsInSegmentHCOctetsThe total number of octets received. This is the 64
bit version of mplsInSegmentOctets.ro Counter64 .1.3.6.1.4.1.1991.1.2.15.15.2.1.4.1.5 |
mplsInSegmentPerfDiscontinuityTimeThe value of sysUpTime on the most recent occasion
at which any one or more of this segment's Counter32
or Counter64 suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization of the local management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.4.1.6 |
mplsOutSegmentIndexNextThis object contains the next appropriate value to
be used for mplsOutSegmentIndex when creating
entries in the mplsOutSegmentTable. If the number
of unassigned entries is exhausted, this object will
take on the value of 0. To obtain the
mplsOutSegmentIndex value for a new entry, the
manager must first issue a management protocol
retrieval operation to obtain the current value of
this object. The agent should modify the value to
reflect the next unassigned index after each
retrieval operation. After a manager retrieves a
value the agent will determine through its local
policy when this index value will be made available
for reuse.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.5 |
mplsOutSegmentTableThis table contains a representation of the outgoing
segments from an LSR. SEQUENCE OF MplsOutSegmentEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.6 |
mplsOutSegmentEntryAn entry in this table represents one outgoing
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The object mplsOutSegmentOwner indicates
the creator of this entry. The value of
mplsOutSegmentRowStatus cannot be active(1)unless
the ifTable entry corresponding to
mplsOutSegmentIfIndex exists. MplsOutSegmentEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1 |
mplsOutSegmentIndexThis value contains a unique index for this row.
While a value of 0 is not valid as an index for this
row it can be supplied as a valid value to index
mplsXCTable to access entries for which no out-
segment has been configured. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.1 |
mplsOutSegmentIfIndexThis value must contain the interface index of the
outgoing interface. This object may only take the
value of 0 during the create-and-wait row creation
operation if the management station has not yet set
the value of this object. This object cannot be
modified if mplsOutSegmentRowStatus is active(1).
The mplsOutSegmentRowStatus cannot be set to
active(1) until this object is set to a value
corresponding to a valid ifEntry.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.2 |
mplsOutSegmentPushTopLabelThis value indicates whether or not a top label
should be pushed onto the outgoing packet's label
stack. The value of this variable MUST be set to
true if the outgoing interface does not support pop-
and-go (for example an ATM interface) or if it is a
tunnel origination. Note that it is considered an
error in the case that mplsOutSegmentPushTopLabel is
set to false, but the cross-connect entry which
refers to this out-segment has a non-zero
mplsLabelStackIndex. The LSR MUST ensure that this
situation does not happen. This object cannot be
modified if mplsOutSegmentRowStatus is active(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.3 |
mplsOutSegmentTopLabelIf mplsOutSegmentPushTopLabel is true then this
represents the label that should be pushed onto the
top of the outgoing packet's label stack. Otherwise
this value SHOULD be set to 0 by the management
station and MUST be ignored by the agent. This
object cannot be modified if mplsOutSegmentRowStatus
is active(1).rw MplsLabel (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.4 |
mplsOutSegmentNextHopIpAddrTypeIndicates whether the next hop address is IPv4 or
IPv6. Note that a value of unknown (0) is valid
only when the outgoing interface is of type point-to-
point. This object cannot be modified if
mplsOutSegmentRowStatus is active(1).rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.5 |
mplsOutSegmentNextHopIpv4AddrIPv4 Address of the next hop. Its value is
significant only when
mplsOutSegmentNextHopIpAddrType is ipV4 (1),
otherwise it SHOULD return a value of 0. This object
cannot be modified if mplsOutSegmentRowStatus is
active(1).rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.6 |
mplsOutSegmentNextHopIpv6AddrIPv6 address of the next hop. Its value is
significant only when
mplsOutSegmentNextHopIpAddrType is ipV6 (2),
otherwise it SHOULD return a value of 0. This object
cannot be modified if mplsOutSegmentRowStatus is
active(1).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.7 |
mplsOutSegmentXCIndexIndex into mplsXCTable which identifies which cross-
connect entry this segment is part of. A value of
zero indicates that this entry is not referred to by
any cross-connect entry. When a cross-connect entry
is created which this out-segment is a part of, this
object is automatically updated to reflect the value
of mplsXCIndex of that cross-connect entry.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.8 |
mplsOutSegmentOwnerDenotes the entity which created and is responsible
for managing this segment. This object cannot be
modified if mplsOutSegmentRowStatus is active(1).rw MplsInitialCreationSource (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.9 |
mplsOutSegmentTrafficParamPtrThis variable represents a pointer to the traffic
parameter specification for this out-segment. This
value may point at an entry in the
mplsTrafficParamTable to indicate which
mplsTrafficParamEntry is to be assigned to this
segment. This value may optionally point at an
externally defined traffic parameter specification
table. A value of zero-dot-zero indicates best-
effort treatment. By having the same value of this
object, two or more segments can indicate resource
sharing. This object cannot be modified if
mplsOutSegmentRowStatus is active(1).rw RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.10 |
mplsOutSegmentRowStatusFor creating, modifying, and deleting this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.11 |
mplsOutSegmentStorageTypeThis variable indicates the storage type for this
object. This object cannot be modified if
mplsOutSegmentRowStatus is active(1). If this
variable is set to readOnly(5), and the
corresponding TFIB entry is removed, then the agent
must remove this row shortly thereafter.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.6.1.12 |
mplsOutSegmentPerfTableThis table contains statistical information about
outgoing segments from an LSR. The counters in this
entry should behave in a manner similar to that of
the interface. SEQUENCE OF MplsOutSegmentPerfEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.7 |
mplsOutSegmentPerfEntryAn entry in this table contains statistical
information about one outgoing segment configured in
mplsOutSegmentTable. MplsOutSegmentPerfEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.7.1 |
mplsOutSegmentOctetsThis value contains the total number of octets sent
on this segment.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.7.1.1 |
mplsOutSegmentPacketsThis value contains the total number of packets sent
on this segment.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.7.1.2 |
mplsOutSegmentErrorsNumber of packets that could not be sent due to
errors on this segment.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.7.1.3 |
mplsOutSegmentDiscardsThe number of labeled packets received on this out-
segment, which were chosen to be discarded even
though no errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a labeled packet could be to free up
buffer space.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.7.1.4 |
mplsOutSegmentHCOctetsTotal number of octets sent. This is the 64 bit
version of mplsOutSegmentOctets.ro Counter64 .1.3.6.1.4.1.1991.1.2.15.15.2.1.7.1.5 |
mplsOutSegmentPerfDiscontinuityTimeThe value of sysUpTime on the most recent occasion
at which any one or more of this segment's Counter32
or Counter64 suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization of the local management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.7.1.6 |
mplsXCIndexNextThis object contains an appropriate value to be used
for mplsXCIndex when creating entries in the
mplsXCTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of mplsXCIndex for a new entry in the
mplsXCTable, the manager issues a management
protocol retrieval operation to obtain the current
value of mplsXCIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.8 |
mplsXCTableThis table specifies information for switching
between LSP segments. It supports point-to-point,
point-to-multipoint and multipoint-to-point
connections. mplsLabelStackTable specifies the
label stack information for a cross-connect LSR and
is referred to from mplsXCTable. SEQUENCE OF MplsXCEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.9 |
mplsXCEntryA row in this table represents one cross-connect
entry. The following objects index it:
- cross-connect index mplsXCIndex that uniquely
identifies a group of cross-connect entries
- interface index of the in-segment,
mplsInSegmentIfIndex
- incoming label(s), mplsInSegmentLabel
- out-segment index, mplsOutSegmentIndex
Originating LSPs:
These are represented by using the special
combination of values mplsInSegmentIfIndex=0 and
mplsInSegmentLabel=0 as indexes. In this case the
mplsOutSegmentIndex MUST be non-zero.
Terminating LSPs:
These are represented by using the special value
mplsOutSegmentIndex=0 as index.
Special labels:
Entries indexed by reserved MPLS label values 0
through 15 imply terminating LSPs and MUST have
mplsOutSegmentIfIndex = 0. Note that situations
where LSPs are terminated with incoming label equal
to 0, should have mplsInSegmentIfIndex = 0 as well,
but can be distinguished from originating LSPs
because the mplsOutSegmentIfIndex = 0. The
mplsOutSegmentIfIndex MUST only be set to 0 in
cases of terminating LSPs.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signaling protocol. MplsXCEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1 |
mplsXCIndexPrimary index for the conceptual row identifying a
group of cross-connect segments. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.1 |
mplsXCLspIdThis value identifies the label switched path that
this cross-connect entry belongs to. This object
cannot be modified if mplsXCRowStatus is active(1).rw MplsLSPID (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.2 |
mplsXCLabelStackIndexPrimary index into mplsLabelStackTable identifying a
stack of labels to be pushed beneath the top label.
Note that the top label identified by the out-
segment ensures that all the components of a
multipoint-to-point connection have the same
outgoing label. A value of 0 indicates that no
labels are to be stacked beneath the top label. This
object cannot be modified if mplsXCRowStatus is
active(1).rw Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.3 |
mplsXCIsPersistentDenotes whether or not this cross-connect entry and
associated in- and out-segments should be restored
automatically after failures. This value MUST be
set to false in cases where this cross-connect entry
was created by a signaling protocol. This object
cannot be modified if mplsXCRowStatus is active(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.4 |
mplsXCOwnerDenotes the entity that created and is responsible
for managing this cross-connect. This object cannot
be modified if mplsXCRowStatus is active(1).rw MplsInitialCreationSource (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.5 |
mplsXCRowStatusFor creating, modifying, and deleting this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.6 |
mplsXCStorageTypeDefines the storage type for this object. This
object cannot be modified if mplsXCRowStatus is
active(1). If this variable is set to readOnly(5),
and the corresponding TFIB entry is removed, then
the agent must remove this row shortly thereafter.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.7 |
mplsXCAdminStatusThe desired operational status of this segment.rw Enumeration .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.8 |
mplsXCOperStatusThe actual operational status of this cross-
connect.ro Enumeration .1.3.6.1.4.1.1991.1.2.15.15.2.1.9.1.9 |
mplsMaxLabelStackDepthThe maximum stack depth supported by this LSR.ro Integer32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.10 |
mplsLabelStackIndexNextThis object contains an appropriate value to be used
for mplsLabelStackIndex when creating entries in the
mplsLabelStackTable. The value 0 indicates that no
unassigned entries are available. To obtain an
mplsLabelStackIndex value for a new entry, the
manager issues a management protocol retrieval
operation to obtain the current value of this
object. After each retrieval operation, the agent
should modify the value to reflect the next
unassigned index. After a manager retrieves a value
the agent will determine through its local policy
when this index value will be made available for
reuse.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.11 |
mplsLabelStackTableThis table specifies the label stack to be pushed
onto a packet, beneath the top label. Entries into
this table are referred to from mplsXCTable. SEQUENCE OF MplsLabelStackEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.12 |
mplsLabelStackEntryAn entry in this table represents one label which is
to be pushed onto an outgoing packet, beneath the
top label. An entry can be created by a network
administrator or by an SNMP agent as instructed by
an MPLS signaling protocol. MplsLabelStackEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.12.1 |
mplsLabelStackIndexPrimary index for this row identifying a stack of
labels to be pushed on an outgoing packet, beneath
the top label. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.12.1.1 |
mplsLabelStackLabelIndexSecondary index for this row identifying one label
of the stack. Note that an entry with a smaller
mplsLabelStackLabelIndex would refer to a label
higher up the label stack and would be popped at a
downstream LSR before a label represented by a
higher mplsLabelStackLabelIndex at a downstream
LSR. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.12.1.2 |
mplsLabelStackLabelThe label to pushed.rw MplsLabel (HP-SN-MPLS-TC-MIB) .1.3.6.1.4.1.1991.1.2.15.15.2.1.12.1.3 |
mplsLabelStackRowStatusFor creating, modifying, and deleting this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.12.1.4 |
mplsLabelStackStorageTypeDefines the storage type for this object. If this
variable is set to readOnly(5), and the
corresponding TFIB entry is removed, then the agent
must remove this row shortly thereafter.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.12.1.5 |
mplsTrafficParamIndexNextThis object contains an appropriate value which will
be used for mplsTrafficParamIndex when creating
entries in the mplsTrafficParamTable. The value 0
indicates that no unassigned entries are available.
To obtain the mplsTrafficParamIndex value for a new
entry, the manager issues a management protocol
retrieval operation to obtain the current value of
this object. After each retrieval operation, the
agent should modify the value to reflect the next
unassigned index. After a manager retrieves a value
the agent will determine through its local policy
when this index value will be made available for
reuse.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.13 |
mplsTrafficParamTableThis table specifies the Traffic Parameter objects
for in and out-segments. SEQUENCE OF MplsTrafficParamEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.14 |
mplsTrafficParamEntryAn entry in this table represents the TrafficParam
objects for one or more in or out segments. A
single entry can be pointed to by multiple segments
indicating resource sharing. MplsTrafficParamEntry .1.3.6.1.4.1.1991.1.2.15.15.2.1.14.1 |
mplsTrafficParamIndexUniquely identifies this row of the table. Note
that zero represents an invalid index. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.15.2.1.14.1.1 |
mplsTrafficParamMaxRateMaximum rate in kilobits/second.rw MplsBitRate UNITS "kilobits per second" .1.3.6.1.4.1.1991.1.2.15.15.2.1.14.1.2 |
mplsTrafficParamMeanRateMean rate in kilobits/second.rw MplsBitRate UNITS "kilobits per second" .1.3.6.1.4.1.1991.1.2.15.15.2.1.14.1.3 |
mplsTrafficParamMaxBurstSizeMaximum burst size in bytes.rw MplsBurstSize UNITS "bytes" .1.3.6.1.4.1.1991.1.2.15.15.2.1.14.1.4 |
mplsTrafficParamRowStatusFor creating, modifying, and deleting this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.14.1.5 |
mplsTrafficParamStorageTypeThe storage type for this object. If this variable
is set to readOnly(5), and the corresponding TFIB
entry is removed, then the agent must remove this
row shortly thereafter.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.14.1.6 |
mplsXCTrapEnableIf this object is set to true(1), then it enables
the emission of mplsXCUp and mplsXCDown
notifications; otherwise these notifications are not
emitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.15.2.1.15 |
mplsLsrNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.15.2.2 |
mplsLsrNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.15.2.2.0 |
mplsXCUpThis notification is generated when the
mplsXCOperStatus object for one or more contiguous
entries in mplsXCTable are about to enter the up(1)
state from some other. The included values of
mplsXCOperStatus MUST both be set equal to this
other state. The two instances of mplsXCOperStatus
in this notification indicate the range of indexes
that are affected. Note that all the indexes of the
two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of cross-connects
have transitioned into the up(1) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single cross-connect entry, then
the instance identifier (and values) of the two
mplsXCOperStatus objects MUST be the identical. NOTIFICATION-TYPE .1.3.6.1.4.1.1991.1.2.15.15.2.2.0.1 |
mplsXCDownThis notification is generated when the
mplsXCOperStatus object for one or more contiguous
entries in mplsXCTable are about to enter the
down(2) state from some other. The included values
of mplsXCOperStatus MUST both be set equal to this
other state. The two instances of mplsXCOperStatus
in this notification indicate the range of indexes
that are affected. Note that all the indexes of the
two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of cross-connects
have transitioned into the down(2) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single cross-connect entry, then
the instance identifier (and values) of the two
mplsXCOperStatus objects MUST be the identical. NOTIFICATION-TYPE .1.3.6.1.4.1.1991.1.2.15.15.2.2.0.2 |
mplsLsrConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.15.2.3 |
mplsLsrGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.15.2.3.1 |
mplsLsrCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.15.2.3.2 |