FDRY-MPLS-L2VPN-MIB
The Brocade proprietary MIB module for L2 VPN. This mib is built on the current L2VPN draft mib. It has additional information for Virtual Leased Line (VLL), VLL-Local and Virtual Private LAN Service (VPLS) Endpoints, as well as for VPLS Instance.
Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
fdryMplsL2VpnMIB.1.3.6.1.4.1.1991.1.2.15.2
74
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
fdryMplsL2VpnMIBThe Brocade proprietary MIB module for L2 VPN.
This mib is built on the current L2VPN draft mib.
It has additional information for Virtual Leased Line (VLL),
VLL-Local and Virtual Private LAN Service (VPLS) Endpoints,
as well as for VPLS Instance.
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.1991.1.2.15.2 |
IMPORTSThe Brocade proprietary MIB module for L2 VPN.
This mib is built on the current L2VPN draft mib.
It has additional information for Virtual Leased Line (VLL),
VLL-Local and Virtual Private LAN Service (VPLS) Endpoints,
as well as for VPLS Instance.
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment. NOTIFICATION-TYPE .1.3.6.1.4.1.1991.1.2.15.2 |
fdryMplsVpnNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.2.0 |
fdryVplsCreatedThis notification is generated when an entry is created in
fdryVplsTable, indicating creation of a new VPLS instance.
This notification is not generated during system boot up time. NOTIFICATION-TYPE .1.3.6.1.4.1.1991.1.2.15.2.0.1 |
fdryVplsDeletedThis notification is generated when one entry in the
fdryVplsTable have been marked for deletion, indicating
deletion of an existing VPLS instance. NOTIFICATION-TYPE .1.3.6.1.4.1.1991.1.2.15.2.0.2 |
fdryPwCreatedThis notification is generated when an instance of VLL or VLL-Local
pseudo-wire entry is created in the pwTable.
The varbind fdryPwServiceType has the service type which
originated this notification.
This notification is not used for VPLS service.
This notification is not generated during system boot up time NOTIFICATION-TYPE .1.3.6.1.4.1.1991.1.2.15.2.0.3 |
fdryMplsVllInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.2.1 |
fdryVllEndPointTableThis table specifies information about the VLL and VLL-local endpoints which are not
available in the PW tables. SEQUENCE OF FdryVllEndPointEntry .1.3.6.1.4.1.1991.1.2.15.2.1.1 |
fdryVllEndPointEntryA row in this table represents a VLL or VLL-local end point for a
pseudo-wire (PW) virtual connection across a packet network.
For a VLL, we would have one instance of this table for a given PW.
For a VLL-local, there would be two instances of this table for a given PW.
It is indexed by fdryVllEndPointServiceType, pwIndex, and pwEnetPwInstance.
The pwIndex is the index of pwTable, and {pwIndex, pwEnetPwInstance} together
provides an instance in the pwEnetTable.
A row can be created by an operator command after having created a row
in the pwTable and pwEnetTable.
1) Objects MUST NOT be changed after row activation.
2) Objects MAY be changed when the PW is
defined as not active. A change of these objects involves
re-signaling of the PW or it might be traffic affecting.
End point not active is defined as one of the following
conditions:
a) The pwRowStatus is notInService(2).
b) The pwRowStatus is notReady(3).
c) The pwAdminStatus is down(2). FdryVllEndPointEntry .1.3.6.1.4.1.1991.1.2.15.2.1.1.1 |
fdryVllEndPointServiceTypeA service type indicating VLL or VLL-local service for this endpoint.
The value vpls(3) is not used in this table. MplsServiceType .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.1 |
fdryVllEndPointVlanTagModeThis value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.rw VlanTagMode (FOUNDRY-SN-SWITCH-GROUP-MIB) .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.2 |
fdryVllEndPointClassOfServiceThis value indicates the Class Of Service for this endpoint.
For VLL, this value is used to select the appropriate tunnel
whose COS value is either same, or almost approaching this value.
For VLL-local, this value is applied to the ingress packet of an endpointrw ClassOfService .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.3 |
fdryVllEndPointInHCPktsThis value indicates the number of packets ingressing into this endpoint.ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.4 |
fdryVllEndPointOutHCPktsThis value indicates the number of packets egressing out from this endpoint.
For VLL-local, this value could be the fdryVllEndPointInHCPkts of the other endpoint
of this VLL instance. But since rate limit could be applied to the incoming packet,
the count value will not be accurate. Due to this, the value will be 0 for VLL-local.ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.5 |
fdryVllEndPointAdminStatusThe desired administrative status of this endpoint. This object MAY
be set at any time.rw AdminStatus .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.6 |
fdryVllEndPointOperStatusThis object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this tablero PwOperStatusTC (PW-TC-STD-MIB) .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.7 |
fdryVllEndPointRowStatusThis variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object, and the fdryVllEndPointAdminStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.8 |
fdryVllEndPointInnerVlanIdThis value indicates the inner vlan id for this endpoint.
Returns 0 if not configured or is not supported.rw PwVlanCfg .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.9 |
fdryVllEndPointInHCOctetsThis value indicates the number of octets ingressing into this endpoint
from a Customer Edge (CE) device.
This counter is supported in CES/CER platform.ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.10 |
fdryVllEndPointOutHCOctetsThis value indicates the number of octets egressing out from this endpoint towards
the Customer Edge (CE) device.
Within CES/CER, any packet coming in from the tunnel will have its MPLS header as part of the octet count.ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.11 |
brcdVllEndptVlanExtStatsTableThis table contains the VLAN extended statistics
for VLL endpoints. SEQUENCE OF BrcdVllEndptVlanExtStatsEntry .1.3.6.1.4.1.1991.1.2.15.2.1.2 |
brcdVllEndptVlanExtStatsEntryA row in this table represents a VLAN extended statistics
accounting entry of a VLL endpoint. BrcdVllEndptVlanExtStatsEntry .1.3.6.1.4.1.1991.1.2.15.2.1.2.1 |
brcdVllEndptVlanExtStatsPriorityIdIdentifies the port QOS priority.
The values 1 through 8 internally maps to priorities 0 through 7.
The value 128 indicates that priority-level accounting is not enabled PortPriorityTC (FOUNDRY-SN-SWITCH-GROUP-MIB) .1.3.6.1.4.1.1991.1.2.15.2.1.2.1.1 |
brcdVllEndptVlanExtStatsInPktsThe number of valid frames received by this endpoint
from the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.1.2.1.2 |
brcdVllEndptVlanExtStatsOutPktsThe number of valid frames transmitted by this endpoint
to the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.1.2.1.3 |
brcdVllEndptVlanExtStatsInOctetsThe bytes count received by this endpoint from the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.1.2.1.4 |
brcdVllEndptVlanExtStatsOutOctetsThe bytes count transmitted by this endpoint to
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.1.2.1.5 |
fdryMplsVplsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.2.2 |
fdryVplsEndPointTableThis table specifies information about the VPLS endpoints which are not
available in the PW mib, or VPLS draft mib.deprecated SEQUENCE OF FdryVplsEndPointEntry .1.3.6.1.4.1.1991.1.2.15.2.2.1 |
fdryVplsEndPointEntryA row in this table represents a VPLS end point for a
given VPLS instance. The VPLS instance is represented
by vplsConfigTable and fdryVplsTable.
For a given VPLS instance, there could be multiple instances
of rows within this table, each describing one endpoint.
For a given endpoint, there will be one VPLS instance.
A given endpoint is represented by vplsConfigIndex (VPLS instance),
vlan id, and ifIndex of the physical port which is acting as an endpoint.
This allows a tagged port to be associated with multiple VPLS instances.
An untagged port can only be associated with one VPLS instance.
Note that this table is kept independent of the PW tables to indicate
that endpoints terminate on the VPLS instance.
On the other side, a VPLS instance will have association with the PW MIB.
This table is indexed by vplsConfigIndex, fdryVplsEndPointPortVlan,
and fdryVplsEndPointIfIndex.deprecated FdryVplsEndPointEntry .1.3.6.1.4.1.1991.1.2.15.2.2.1.1 |
fdryVplsEndPointPortVlanThis value specifies the VLAN id value of this endpoint.deprecated PwVlanCfg .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.1 |
fdryVplsEndPointIfIndexThis value specifies the ifIndex value of this endpoint.deprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.2 |
fdryVplsEndPointVlanTagModeThis value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.rwdeprecated VlanTagMode (FOUNDRY-SN-SWITCH-GROUP-MIB) .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.3 |
fdryVplsEndPointOutHCPktsThis counter indicates the number of packets egressing
out from this endpoint towards the Customer Edge (CE).
This value counts packets coming from multiple pseudo-wires
towards the endpoint, as well as locally switched packets
between other endpoints to this endpoint, all belonging
to the same VPLS instance.
The value gives count of known unicast packets only.
Unknown unicast and broadcast packets are not counted.rodeprecated Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.4 |
fdryVplsEndPointStateA L2 state of this VPLS endpoint.rodeprecated Enumeration .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.5 |
fdryVplsEndPointAdminStatusThe desired administrative status of this endpoint. This object MAY
be set at any time.rwdeprecated AdminStatus .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.6 |
fdryVplsEndPointOperStatusThis object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this tablerodeprecated PwOperStatusTC (PW-TC-STD-MIB) .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.7 |
fdryVplsEndPointRowStatusThis variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object and the fdryVplsEndPointAdminStatus.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.8 |
fdryVplsEndPointInHCOctetsThis counter indicates the number of octets ingressing
into this endpoint from the Customer Edge (CE).
This object is supported in CES/CER only.rodeprecated Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.9 |
fdryVplsTableThis table specifies additional information about the VPLS instance configuration
which is not available in the VplsConfigTable. Some of these
objects are configuration specific, some are commands specific
to that VPLS instance. SEQUENCE OF FdryVplsEntry .1.3.6.1.4.1.1991.1.2.15.2.2.2 |
fdryVplsEntryA row in this table represents a VPLS instance. It augments
the vplsConfigTable in the VPLS draft mib. FdryVplsEntry .1.3.6.1.4.1.1991.1.2.15.2.2.2.1 |
fdryVplsClassOfServiceThis value indicates the Class Of Service for this VPLS instance.
This value is used to select the appropriate tunnel
whose COS value is either same, or almost approaching this value.rw ClassOfService .1.3.6.1.4.1.1991.1.2.15.2.2.2.1.1 |
fdryVplsMaxMacLearnedThis value indicates the maximum number of MAC addresses
that can be learned by this VPLS instance.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.2.2.2.1.2 |
fdryVplsClearMacThe Set value of TRUE tells the system to clear all the MAC addresses
learned by this VPLS instance. Setting value of FALSE will return an error.
During read operations, value FALSE will be returned at all times.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.2.2.2.1.3 |
fdryVplsVcIdThe VPLS Instance ID of a given VPLS session.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.2.2.2.1.4 |
fdryVplsEndPoint2TableThis table specifies information about the VPLS endpoints which are not
available in the PW mib, or VPLS draft mib.
This table deprecates fdryVplsEndPointTable, as inner VLAN and ISID
has been added as index to this table. SEQUENCE OF FdryVplsEndPoint2Entry .1.3.6.1.4.1.1991.1.2.15.2.2.3 |
fdryVplsEndPoint2EntryA row in this table represents a VPLS end point for a
given VPLS instance. The VPLS instance is represented
by vplsConfigTable and fdryVplsTable.
For a given VPLS instance, there could be multiple instances
of rows within this table, each describing one endpoint.
For a given endpoint, there will be one VPLS instance.
A given endpoint is represented by vplsConfigIndex (VPLS instance),
vlan id, inner-id (inner VLAN or ISID),and ifIndex of the physical port which is acting as an endpoint.
This allows a tagged port to be associated with multiple VPLS instances, and also many inner VLAN or ISID
to be associated with a tagged port (outer VLAN tag)
An untagged port can only be associated with one VPLS instance.
Note that this table is kept independent of the PW tables to indicate
that endpoints terminate on the VPLS instance.
On the other side, a VPLS instance will have association with the PW MIB.
This table is indexed by vplsConfigIndex, fdryVplsEndPointPortVlan,
and fdryVplsEndPointIfIndex. FdryVplsEndPoint2Entry .1.3.6.1.4.1.1991.1.2.15.2.2.3.1 |
fdryVplsEndPoint2VlanIdThis value specifies the VLAN id value of this endpoint. PwVlanCfg .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.1 |
fdryVplsEndPoint2InnerTagTypeThis value indicates the inner id for this endpoint.
If no inner tag is specified, value invalid(1) is returned. Enumeration .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.2 |
fdryVplsEndPoint2InnerTagThis value indicates the inner tag for this endpoint.
If the index fdryVplsEndPoint2InnerTagType has
value isid(3), then this object will have the
ISID value for that endpoint. Valid ISID value
is between 256 (0x100) and 16777214 (0xFFFFFE).
If no inner tag is specified, value 0 is returned. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.3 |
fdryVplsEndPoint2IfIndexThis value specifies the ifIndex value of this endpoint. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.4 |
fdryVplsEndPoint2VlanTagModeThis value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.rw VlanTagMode (FOUNDRY-SN-SWITCH-GROUP-MIB) .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.5 |
fdryVplsEndPoint2InHCOctetsThis counter indicates the number of octets ingressing
into this endpoint from the Customer Edge (CE).
This object is supported in CES/CER only.ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.6 |
fdryVplsEndPoint2Layer2StateThe L2 state of this VPLS endpoint.ro Layer2StateTC .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.7 |
fdryVplsEndPoint2OperStatusThis object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this tablero PwOperStatusTC (PW-TC-STD-MIB) .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.8 |
fdryVplsEndPoint2RowStatusThis variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.9 |
brcdVplsEndptVlanExtStatsTableThis table contains the VLAN extended statistics for VPLS endpoints. SEQUENCE OF BrcdVplsEndptVlanExtStatsEntry .1.3.6.1.4.1.1991.1.2.15.2.2.4 |
brcdVplsEndptVlanExtStatsEntryA row in this table represents a VLAN extended statistics
accounting entry of a VPLS endpoint. BrcdVplsEndptVlanExtStatsEntry .1.3.6.1.4.1.1991.1.2.15.2.2.4.1 |
brcdVplsEndptVlanExtStatsPriorityIdIdentifies the port QOS priority.
The values 1 through 8 internally maps to priorities 0 through 7.
The value 128 indicates that priority-level accounting is not enabled PortPriorityTC (FOUNDRY-SN-SWITCH-GROUP-MIB) .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.1 |
brcdVplsEndptVlanExtStatsInPktsThe number of valid switched and routed frames received by this endpoint from
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.2 |
brcdVplsEndptVlanExtStatsOutPktsThe number of valid switched and routed frames transmitted by this endpoint to
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.3 |
brcdVplsEndptVlanExtStatsInOctetsThe switched and routed bytes count received by this endpoint from
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.4 |
brcdVplsEndptVlanExtStatsOutOctetsThe switched and routed bytes count transmitted by this endpoint to
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.5 |
brcdVplsEndptVlanExtStatsRoutedInPktsThe number of valid routed frames received by this endpoint from
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.6 |
brcdVplsEndptVlanExtStatsRoutedOutPktsThe number of valid routed frames transmitted by this endpoint to
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.7 |
brcdVplsEndptVlanExtStatsRoutedInOctetsThe routed bytes count received by this endpoint from
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.8 |
brcdVplsEndptVlanExtStatsRoutedOutOctetsThe routed bytes count transmitted by this endpoint to
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.9 |
brcdVplsEndptVlanExtStatsSwitchedInPktsThe number of valid switched frames received by this
endpoint from the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.10 |
brcdVplsEndptVlanExtStatsSwitchedOutPktsThe number of valid switched frames transmitted by this
endpoint to the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.11 |
brcdVplsEndptVlanExtStatsSwitchedInOctetsThe switched bytes count received by this endpoint from
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.12 |
brcdVplsEndptVlanExtStatsSwitchedOutOctetsThe switched bytes count transmitted by this endpoint to
the Customer Edge (CE).ro Counter64 .1.3.6.1.4.1.1991.1.2.15.2.2.4.1.13 |
brcdVplsScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.2.2.5 |
brcdVplsMacAgeTimeLocalAge timer for local entries of VPLS MACs in software cache.
The default value is 300. Configurable range is 60 to 65535.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.1991.1.2.15.2.2.5.1 |
brcdVplsMacAgeTimeRemoteAge timer for remote entries of VPLS MACs in software cache.
The default value is 600. Configurable range is 60 to 65535.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.1991.1.2.15.2.2.5.2 |