Home/Catalog/FOUNDRY-SN-TRAP-MIB

FOUNDRY-SN-TRAP-MIB

AI MIB Summary

Standard SNMP MIB module defining data structures for FOUNDRY-SN-TRAP-MIB.

78
Objects
Active
Status
6
Dependencies

Imported Objects

Objects

78 total
Object Name
IMPORTSFROM
TRAP-TYPE
.1.3.6.1.4.1.1991.0.1
snTrapLockedAddressViolationThe SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.2
snTrapOspfIfStateChangeAn ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).
TRAP-TYPE
.1.3.6.1.4.1.1991.0.3
snTrapOspfVirtIfStateChangeAn ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
TRAP-TYPE
.1.3.6.1.4.1.1991.0.4
snOspfNbrStateChangeAn ospfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by ospfIfStateChange.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.5
snOspfVirtNbrStateChangeAn ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
TRAP-TYPE
.1.3.6.1.4.1.1991.0.6
snOspfIfConfigErrorAn ospfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.7
snOspfVirtIfConfigErrorAn ospfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.8
snOspfIfAuthFailureAn ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.9
snOspfVirtIfAuthFailureAn ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.10
snOspfIfRxBadPacketAn ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.11
snOspfVirtIfRxBadPacketAn ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.12
snOspfTxRetransmitAn ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.13
ospfVirtIfTxRetransmitAn ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.14
snOspfOriginateLsaAn ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.15
snOspfMaxAgeLsaAn ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.16
snOspfLsdbOverflowAn ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded ospfExtLsdbLimit.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.17
snOspfLsdbApproachingOverflowAn ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.18
snTrapL4MaxSessionLimitReachedThe SNMP trap that is generated when the maximum number of connections reached.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.19
snTrapL4TcpSynLimitReachedThe SNMP trap that is generated when the number of TCP SYN limits reached.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.20
snTrapL4RealServerUpThe SNMP trap that is generated when the load balancing real server is up.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.21
snTrapL4RealServerDownThe SNMP trap that is generated when the load balancing real server is down.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.22
snTrapL4RealServerPortUpThe SNMP trap that is generated when the load balancing real server TCP port is up.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.23
snTrapL4RealServerPortDownThe SNMP trap that is generated when the load balancing real server TCP port is down.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.24
snTrapL4RealServerMaxConnectionLimitReachedThe SNMP trap that is generated when the real server reaches maximum number of connections.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.25
snTrapL4BecomeStandbyThe SNMP trap that is generated when the server load balancing switch changes state from active to standby.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.26
snTrapL4BecomeActiveThe SNMP trap that is generated when the server load balancing switch changes state from standby to active.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.27
snTrapModuleInsertedThe SNMP trap that is generated when a module was inserted to the chassis during system running.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.28
snTrapModuleRemovedThe SNMP trap that is generated when a module was removed from the chassis during system running.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.29
snTrapChasPwrSupplyFailed}
TRAP-TYPE
.1.3.6.1.4.1.1991.0.30
snTrapChasFanFailed}
TRAP-TYPE
.1.3.6.1.4.1.1991.0.31
snTrapLockedAddressViolation2The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.32
snTrapFsrpIfStateChangeThe SNMP trap that is generated when a FSRP routing device changed state from active to standby or vice-versa.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.33
snTrapVrrpIfStateChangeThe SNMP trap that is generated when a VRRP routing device changed state from master to backup or vice-versa.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.34
snTrapMgmtModuleRedunStateChangeThe SNMP trap that is generated when the management module changes redundancy state.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.35
snTrapTemperatureWarningThe SNMP trap that is generated when the actual temperature reading is above the warning temperature threshold.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.36
snTrapAccessListDenyThe SNMP trap that is generated when a packet was denied by an access list.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.37
snTrapMacFilterDenyThe SNMP trap that is generated when a packet was denied by a MAC address filter.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.38
snTrapL4GslbRemoteUpThe SNMP trap that is generated when the connection to the remote SI is established.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.39
snTrapL4GslbRemoteDownThe SNMP trap that is generated when the connection to the remote SI is down.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.40
snTrapL4GslbRemoteControllerUpThe SNMP trap that is generated when the connection to the GSLB SI is established.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.41
snTrapL4GslbRemoteControllerDownThe SNMP trap that is generated when the connection to the GSLB SI is down.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.42
snTrapL4GslbHealthCheckIpUpThe SNMP trap that is generated when GSLB health check for an address transitions from down to active state.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.43
snTrapL4GslbHealthCheckIpDownThe SNMP trap that is generated when GSLB health check for an address transitions from active to down state.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.44
snTrapL4GslbHealthCheckIpPortUpThe SNMP trap that is generated when a given port for a health check address is up.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.45
snTrapL4GslbHealthCheckIpPortDownThe SNMP trap that is generated when a given port for a health check address is down.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.46
snTrapL4FirewallBecomeStandbyThe SNMP trap that is generated when the server load balancing switch Firewall changes state from active to standby.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.47
snTrapL4FirewallBecomeActiveThe SNMP trap that is generated when the server load balancing switch Firewall changes state from standby to active.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.48
snTrapL4FirewallPathUpThe SNMP trap that is generated when the server load balancing switch Firewall path is up.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.49
snTrapL4FirewallPathDownThe SNMP trap that is generated when the server load balancing switch Firewall path is down.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.50
snTrapIcmpLocalExceedBurstThe SNMP trap that is generated when incoming ICMP exceeds burst-MAX.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.51
snTrapIcmpTransitExceedBurstThe SNMP trap that is generated when transit ICMP exceeds burst-MAX.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.52
snTrapTcpLocalExceedBurstThe SNMP trap that is generated when incoming TCP SYN exceeds burst-MAX.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.53
snTrapTcpTransitExceedBurstThe SNMP trap that is generated when transit TCP exceeds burst-MAX.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.54
snTrapL4ContentVerificationThe SNMP trap that is generated when the HTTP match-list pattern is found.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.55
snTrapDuplicateIpDuplicate IP address detected.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.56
snTrapMplsProblemMPLS Problem Detected.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.57
snTrapMplsExceptionMPLS Exception Detected.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.58
snTrapMplsAuditMPLS Audit Trap.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.59
snTrapMplsDeveloperMPLS Developer Trap.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.60
snTrapNoBmFreeQueueThe SNMP trap that is generated when no free queue is available in buffer manager.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.61
snTrapSmcDmaDropThe SNMP trap that is generated when SMC DMA packet is dropped.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.62
snTrapSmcBpDropThe SNMP trap that is generated when SMC BackPlane packet is dropped.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.63
snTrapBmWriteSeqDropThe SNMP trap that is generated when BM write sequence packet is dropped.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.64
snTrapBgpPeerUpThe SNMP trap that is generated when the bgp peer is up.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.65
snTrapBgpPeerDownThe SNMP trap that is generated when the bgp peer is down.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.66
snTrapL4RealServerResponseTimeLowerLimitThe SNMP trap that is generated when the real server average response time exceeds lower threshold.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.67
snTrapL4RealServerResponseTimeUpperLimitThe SNMP trap that is generated when the real server average response time exceeds upper threshold.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.68
snTrapL4TcpAttackRateExceedMaxThe SNMP trap that is generated when the TCP attack rate exceeds configured maximum.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.69
snTrapL4TcpAttackRateExceedThresholdThe SNMP trap that is generated when the TCP attack rate exceeds 80% of configured maximum.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.70
snTrapL4ConnectionRateExceedMaxThe SNMP trap that is generated when the L4 connection rate exceeds configured maximum.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.71
snTrapL4ConnectionRateExceedThresholdThe SNMP trap that is generated when the L4 connection rate exceeds 80% of configured maximum
TRAP-TYPE
.1.3.6.1.4.1.1991.0.72
snTrapRunningConfigChangedThe SNMP trap that is generated when the running configuration was changed.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.73
snTrapStartupConfigChangedThe SNMP trap that is generated when the startup configuration was changed.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.74
snTrapUserLoginThe SNMP trap that is generated when user login.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.75
snTrapUserLogoutThe SNMP trap that is generated when user logout.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.76
snTrapPortSecurityViolationThe SNMP trap that is generated when insecure MAC addresses are received from a port with MAC security feature enabled.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.77
snTrapPortSecurityShutdownThe SNMP trap that is generated when insecure MAC addresses are received from a port caused the port to shutdown.
TRAP-TYPE
.1.3.6.1.4.1.1991.0.78
FOUNDRY-SN-TRAP-MIB - SNMP MIB Reference | MIBs Explorer