HH3C-STORAGE-MIB
AI MIB Summary
The HH3C-STORAGE-MIB facilitates the monitoring and management of H3C storage subsystem properties, configurations, and operational states via SNMP. It exposes specific metrics including storage device attributes, configuration parameters, and management interfaces for H3C storage hardware.
This MIB describes the general information of storage device, such as the property, configuration and management.
Main OID:
hh3cStorageMIB.1.3.6.1.4.1.25506.10.1
91
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
91 total| Object Name |
|---|
hh3cStorageMIBThis MIB describes the general information of storage device, such as the property, configuration and management. MODULE-IDENTITY .1.3.6.1.4.1.25506.10.1 |
hh3cStorageMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1 |
hh3cStorageServerInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1.1 |
hh3cStorageServerCapability OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1.1.1 |
hh3cRaidCapabilityThis object identifies if the agent support raid management.ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.1 |
hh3cFcCapabilityThis object identifies if the agent support FC(fiber channel) management.ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.2 |
hh3cNasCapabilityThis object identifies if the agent support NAS(Network Attached Storage).ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.3 |
hh3cAdaptiveRepCapabilityThis object identifies if the agent support adaptive replication. With adaptive replication option, data from the primary resource is continuously replicated to a replication resource unless the system determines it is not practical or possible, such as when there is insufficient bandwidth. For continuous replication to occur, a continuous replication resource is used to stage the data being replicated from the primary resource. Similar to a cache, as soon as data comes into the continuous replication resource, it is written to the replication resource.ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.4 |
hh3cRemoteRepCapabilityThis object identifies if the agent support remote replication.ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.5 |
hh3cSafeCacheCapabilityThis object identifies if the agent support safe cache.ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.6 |
hh3cSyncMirrorCapabilityThis object identifies if the agent support synchronized mirror.ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.7 |
hh3cAsyncMirrorCapabilityThis object identifies if the agent support asynchronous mirror.ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.8 |
hh3cTimeMarkCapabilityThis object identifies if the agent support time mark.ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.9 |
hh3cSseCapabilityThis object identifies if the agent support SSE(Storage Service Enable).ro Hh3cStorageCapableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.1.10 |
hh3cStorageTargetConfig OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1.1.2 |
hh3ciSCSITargetEnableThis object identifies if the agent support iSCSI target.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.2.1 |
hh3cFcTargetEnableThis object identifies if the agent support FC target.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.2.2 |
hh3cStorageServerPhysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1.1.3 |
hh3cServerLocationLedStateThis object identifies the state of storage device's location led.rw Hh3cStorageLedStateType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.3.1 |
hh3cServerResetButtonStateThis object identifies if the reset button is enable.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.3.2 |
hh3cServerPowerButtonStateThis object identifies if the power button is enable.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.1.3.3 |
hh3cServerPowerStateThis object identifies the state of power supply in the server, and is valid when UPS has been configured successful. The value 'online' means power supply is well-balanced. The value 'onlinebypass' means supply power without ups. The value 'onbattery' means supply power with battery. The value 'unknown' means the power supply state is unknown.ro Enumeration .1.3.6.1.4.1.25506.10.1.1.1.3.4 |
hh3cStoragePhysicalInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1.2 |
hh3cDeuTableThis table contains some information of a particular DEU(Disk Enclosure Unit). SEQUENCE OF Hh3cDeuEntry .1.3.6.1.4.1.25506.10.1.1.2.1 |
hh3cDeuEntryAn entry containing management information applicable to a particular DEU. Hh3cDeuEntry .1.3.6.1.4.1.25506.10.1.1.2.1.1 |
hh3cDeuIndexThis object identifies the index of hh3cDeuTable. The DEU identified by a particular value of this index is the same object as identified by the same value of entPhysicalIndex. Integer32 .1.3.6.1.4.1.25506.10.1.1.2.1.1.1 |
hh3cDeuIDLedThis object identifies the state of storage DEU's led.rw Hh3cStorageLedStateType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.2.1.1.2 |
hh3cDeuDiskScanThe operation of scanning the table. When the value of this object is set to 'action', the operation of disk scanning is touched off.rw Hh3cStorageActionType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.2.1.1.3 |
hh3cStorageInterfaceTableThis table describes the interface information of the network. SEQUENCE OF Hh3cStorageInterfaceEntry .1.3.6.1.4.1.25506.10.1.1.2.2 |
hh3cStorageInterfaceEntryAn entry containing management information applicable to a particular interface. Hh3cStorageInterfaceEntry .1.3.6.1.4.1.25506.10.1.1.2.2.1 |
hh3cStorageInterfaceIndexThis object identifies the index of Hh3cStorageInterfaceEntry. The interface identified by this index is the same interface as identified by the same value of ifIndex. Integer32 .1.3.6.1.4.1.25506.10.1.1.2.2.1.1 |
hh3cStorageInterfaceGatewayThis object identifies the gateway address of interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.10.1.1.2.2.1.2 |
hh3cStorageInterfaceGatewayTypeThis object identifies the gateway address type of interface.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.10.1.1.2.2.1.3 |
hh3cStorageInterfaceMTUThis object identifies the MTU of interface.rw Enumeration .1.3.6.1.4.1.25506.10.1.1.2.2.1.4 |
hh3cBondingTableThis table describes the information of the Bonding interface. SEQUENCE OF Hh3cBondingEntry .1.3.6.1.4.1.25506.10.1.1.2.3 |
hh3cBondingEntryAn entry containing management information applicable to a particular Bonding interface. Hh3cBondingEntry .1.3.6.1.4.1.25506.10.1.1.2.3.1 |
hh3cBondingIndexThis object identifies the index of hh3cBondingEntry. The interface identified by this index is the same interface as identified by the same value of ifIndex. Integer32 .1.3.6.1.4.1.25506.10.1.1.2.3.1.1 |
hh3cBondingPortListAn entry contains management information applicable to a particular bonding interface. Every two bytes describe the ifIndex of an interface, and an interface belongs to one bonding group only. An interface should be deleted from the portlist of the bonding group it belongs to before it is added to another bonding group.rw OCTET STRING .1.3.6.1.4.1.25506.10.1.1.2.3.1.2 |
hh3cScsiAdapterTableThis table containing some information of the SCSI(Small Computer System interface) adapter. SEQUENCE OF Hh3cScsiAdapterEntry .1.3.6.1.4.1.25506.10.1.1.2.4 |
hh3cScsiAdapterEntryAn entry containing management information applicable to a particular SCSI adapter. Hh3cScsiAdapterEntry .1.3.6.1.4.1.25506.10.1.1.2.4.1 |
hh3cAdapterNumberThis object identifies the index of the adapter . Integer32 .1.3.6.1.4.1.25506.10.1.1.2.4.1.1 |
hh3cAdapterDescThis object describes some information of the adapter.ro OCTET STRING .1.3.6.1.4.1.25506.10.1.1.2.4.1.2 |
hh3cAdapterTypeThis object identifies the type of adapter. If the value of this object is not equal to 'fc', the associated object(such as hh3cFcAdapterMode, hh3cFcAdapterIWWPNs,hh3cFcAdapterTWWPNs,hh3cFcAdapterPortState,hh3cFcAdapterModeSwitch) will be invalid.ro Enumeration .1.3.6.1.4.1.25506.10.1.1.2.4.1.3 |
hh3cFcAdapterModeThis object identifies the mode type of adapter.ro Enumeration .1.3.6.1.4.1.25506.10.1.1.2.4.1.4 |
hh3cFcAdapterInitiatorWwpnNameThis object describes the FC's adapter WWPN(World Wide Port Name) numbers.ro Hh3cWwpnListType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.2.4.1.5 |
hh3cFcAdapterTargetWwpnNameThis object describes the FC's target WWPN numbers.ro Hh3cWwpnListType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.2.4.1.6 |
hh3cFcAdapterPortStateThis object identifies the state of adapter's interface.ro Enumeration .1.3.6.1.4.1.25506.10.1.1.2.4.1.7 |
hh3cFcAdapterModeSwitchThis object identifies if the adapter work on a target mode.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.2.4.1.8 |
hh3cExtVoltageTableThis table contains some entity extend information of the voltage. SEQUENCE OF Hh3cExtVoltageEntry .1.3.6.1.4.1.25506.10.1.1.2.5 |
hh3cExtVoltageEntryAn entry containing management information applicable to the voltage. Hh3cExtVoltageEntry .1.3.6.1.4.1.25506.10.1.1.2.5.1 |
hh3cExtVoltagePhysicalIndexThis object identifies the entity index of voltage.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.25506.10.1.1.2.5.1.1 |
hh3cExtVoltagePhysicalNameThis object identifies the entity name of voltage.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.25506.10.1.1.2.5.1.2 |
hh3cExtVoltageThe voltage for the entity.ro Integer32 .1.3.6.1.4.1.25506.10.1.1.2.5.1.3 |
hh3cExtVoltageLowThresholdThe low-threshold for the voltage. When voltage is lower than low-threshold, a notification will be sent.rw Integer32 .1.3.6.1.4.1.25506.10.1.1.2.5.1.4 |
hh3cExtVoltageHighThresholdThe high-threshold for the voltage. When voltage is higher than high-threshold, a notification will be sent.rw Integer32 .1.3.6.1.4.1.25506.10.1.1.2.5.1.5 |
hh3cExtCriticalVoltageLowThresholdThe critical low threshold for voltage. If the voltage is lower too much than the entity needs, the entity will halt.rw Integer32 .1.3.6.1.4.1.25506.10.1.1.2.5.1.6 |
hh3cExtCriticalVoltageHighThresholdThe critical high threshold for voltage. If the voltage is higher too much than the entity needs, the entity will halt.rw Integer32 .1.3.6.1.4.1.25506.10.1.1.2.5.1.7 |
hh3cExtShutdownVoltageLowThresholdThe voltage is lower than the critical low threshold. If the voltage is lower too much than the entity needs, the entity halts now.rw Integer32 .1.3.6.1.4.1.25506.10.1.1.2.5.1.8 |
hh3cExtShutdownVoltageHighThresholdThe voltage is higher than the critical high threshold. If the voltage is higher too much than the entity needs, the entity halts now.rw Integer32 .1.3.6.1.4.1.25506.10.1.1.2.5.1.9 |
hh3cStorageTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1.3 |
hh3cStorageTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1.3.0 |
hh3cStorCriticalLowerTemperatureThresholdNotificationThe hh3cStorCriticalLowerTemperatureThresholdNotification indicates the temperature is lower than the threshold. If the temperature is lower too much than the entity needs, the entity will halt. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.1 |
hh3cStorTemperatureTooLowThe hh3cStorTemperatureTooLow indicates the temperature is lower than the threshold. If the temperature is lower too much than the entity needs, the entity halts now. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.2 |
hh3cExtVoltageLowThresholdNotificationThe hh3cExtVoltageLowThresholdNotification indicates the Voltage is lower than the low-threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.3 |
hh3cExtVoltageHighThresholdNotificationThe hh3cExtVoltageHighThresholdNotification indicates the Voltage is lower than the high-threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.4 |
hh3cExtCriticalVoltageLowThresholdNotificationThe hh3cExtCriticalVoltageLowThresholdNotification indicates the Voltage is lower than the critical low threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.5 |
hh3cExtCriticalVoltageHighThresholdNotificationThe hh3cExtCriticalVoltageHighThresholdNotification indicates the Voltage is higher than the critical high threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.6 |
hh3cExtVoltageTooLowThe hh3cExtVoltageTooLowNotification indicates the Voltage is lower than the critical low threshold, and the entity halt now! NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.7 |
hh3cExtVoltageTooHighThe hh3cExtVoltageTooHighNotification indicates the Voltage is higher than the critical high threshold, and the entity halt now! NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.8 |
hh3cExtBatteryStateNotificationThe hh3cExtBatteryStateNotification indicates the raid battery entity's state changes. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.9 |
hh3cDiskIOErrorNotificationThe hh3cDiskIOErrorNotification indicates that a disk occurred I/O error. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.10 |
hh3cRaidCreateNotificationThe hh3cRaidCreateNotification indicates that a array is created. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.11 |
hh3cRaidDeleteNotificationThe hh3cRaidDeleteStateNotification indicates that a array is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.12 |
hh3cRaidHideStateNotificationThe hh3cRaidFailedNotification indicates that a array hide or unhide. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.13 |
hh3cRaidRunStateNotificationThe hh3cRaidDegradeNotification indicates that a array state change. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.14 |
hh3cRaidImportNotificationThe hh3cRaidFailedNotification indicates that a thrid array is imported. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.15 |
hh3cRaidRebuildStartNotificationThe hh3cRaidRebuildStartNotification indicates that a array start to rebuild. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.16 |
hh3cRaidRebuildFinishNotificationThe hh3cRaidRebuildStartNotification indicates that a array fininsh rebuild. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.17 |
hh3cRaidRebuildPauseNotificationThe hh3cRaidRebuildPauseNotification indicates that pause a array rebuilding. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.18 |
hh3cRaidRebuildInterruptNotificationThe hh3cRaidRebuildInterruptNotification indicates that interrupt a array rebuilding. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.19 |
hh3cSoftwareModuleFailNotificationThe hh3cSoftwareModuleFailNotification indicates that software module(s) fail. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.20 |
hh3cRaidBatteryExpiredNotificationThe hh3cRaidBatteryExpiredNotification indicates RAID Battery lifetime had expired. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.21 |
hh3cRaidBatteryWillExpireNotificationThe hh3cRaidBatteryWillExpireNotification indicates RAID Battery lifetime will expire. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.22 |
hh3cLvOnlineFailNotificationThe hh3cLvOnlineFailNotification indicates lv(s) on vd fail to online. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.23 |
hh3cLvOfflineFailNotificationThe hh3cLvOfflineFailNotification indicates lv(s) on vd fail to offline. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.24 |
hh3cRaidRunNotificationThe hh3cRaidRunNotification indicates that a array is running. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.25 |
hh3cExtVoltageNormalThe hh3cStorVoltageRecoveryNotification indicates the Voltage has recovered in reference. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.26 |
hh3cDiskPowerOnNotificationThe hh3cDiskPowerOnNotification indicates that a disk is power on. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.27 |
hh3cDiskPowerOffNotificationThe hh3cDiskPowerOffNotification indicates that a disk is power off. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.10.1.1.3.0.28 |
hh3cStorageTrapsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.1.1.3.1 |
hh3cSoftwareInfoStringThis object identifies if the software's information.ro Hh3cSoftwareInfoString (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.1.1.3.1.1 |