HH3C-DISK-MIB
This MIB describes the general information of disk device, include the running status, disk interface, and chche management.
Main OID:
hh3cDisk.1.3.6.1.4.1.25506.10.3
18
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
hh3cDiskThis MIB describes the general information of disk device, include the running status, disk interface, and chche management. MODULE-IDENTITY .1.3.6.1.4.1.25506.10.3 |
hh3cDiskMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.3.1 |
hh3cDiskTableThis table contains some entity extend information of the disk. SEQUENCE OF Hh3cDiskEntry .1.3.6.1.4.1.25506.10.3.1.1 |
hh3cDiskEntryAn entry containing management information applicable to the disk. Hh3cDiskEntry .1.3.6.1.4.1.25506.10.3.1.1.1 |
hh3cDiskIndexThis object identifies the entity index of disk. The object identified by this index is the same object as identified by the same value of entPhysicalIndex. Integer32 .1.3.6.1.4.1.25506.10.3.1.1.1.1 |
hh3cDiskPortTypeThis object describes the interface type of disk. The value 'sata' means serial advanced technology attachment. The value 'pata' means parallel advanced technology attachment. The value 'sas' means serial attached SCSI. The value 'scsi' means small computer system interface. The value 'ieee1394' means a type of bus standard. The value 'fcal' means fiber channel arbitrated loop.ro Enumeration .1.3.6.1.4.1.25506.10.3.1.1.1.2 |
hh3cDiskPortSpeedThis object identifies the speed of disk interface. The units is million bytes per second.ro Integer32 UNITS "MB/second" .1.3.6.1.4.1.25506.10.3.1.1.1.3 |
hh3cDiskSizeThis object describes the size of disk's total space. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.3.1.1.1.4 |
hh3cDiskFreeSpaceThis object describes the size of spare space of the disk. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.3.1.1.1.5 |
hh3cDiskLocationStateThis object identifies if the led used to confirm the position of disk is enable.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.3.1.1.1.6 |
hh3cDiskRunLedStateThis object identifies the runing state of the disk. The value of 'on' means the blue led is on, and the disk works well. The value of 'blink' means the blue led is blinking, and the disk is being readed or writed. The value of 'fastblink' means the blue led is blinking very fast, and the disk is being located. This object can not be 'fastblink' when the value of associated hh3cDiskLocationState object is equal to 'disable'.ro Enumeration .1.3.6.1.4.1.25506.10.3.1.1.1.7 |
hh3cDiskFaultLedStateThis object identifies the fault state of the disk. The value of 'off' means the yellow led is go out, and the disk works well. The value of 'on' means the yellow led is on, and the disk break down. The value of 'blink' means the yellow led is blinking, and a group of raid disk is being synchronized.ro Enumeration .1.3.6.1.4.1.25506.10.3.1.1.1.8 |
hh3cDiskInitializeThe operation of initialize the disk. When the value of this object is set to 'action', the operation of disk initialize are touched off.rw Hh3cStorageActionType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.3.1.1.1.9 |
hh3cDiskGlobalSpareThis object identifies if the disk is a global hot spare disk. The value 'globalSpare' means it is a global spare disk, and the value 'nonglobalSpare' means not.rw Enumeration .1.3.6.1.4.1.25506.10.3.1.1.1.10 |
hh3cDiskLocalSpareThis object identifies if the disk is a specific hot spare disk. The value 'localSpare' means it is a local spare disk, and 'nonlocalSpare' means not.ro Enumeration .1.3.6.1.4.1.25506.10.3.1.1.1.11 |
hh3cDiskReadCacheThis object identifies the state of read cache.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.3.1.1.1.12 |
hh3cDiskWriteCacheThis object identifies the state of write cache.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.3.1.1.1.13 |
hh3cDiskPowerOffReasonThis object describes the reason of disk poweroff. The value 'environmentUnstable' means disk poweroff and may poweron again. The value 'mediumError' means disk poweroff and never poweron. The value 'smartCheckError' means disk's SMART check failed and poweroff. The value 'generalError' means disk poweroff because of general error.ro Enumeration .1.3.6.1.4.1.25506.10.3.1.1.1.14 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →HH3C-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HH3C-PRODUCT-ID-MIB
SNMP MIB module
1720 objects→
HH3C-DOT11-APMT-MIB
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
643 objects→
HH3C-ACL-MIB
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
538 objects→
HH3C-CBQOS2-MIB
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
472 objects→
HH3C-WIPS-MIB
SNMP MIB module
454 objects→