HH3C-RAID-MIB
AI MIB Summary
The HH3C-RAID-MIB module enables SNMP-based monitoring of H3C storage subsystem RAID controller status, logical volume configurations, physical disk health, and array performance metrics. It facilitates the collection of critical fault indicators and operational states for H3C proprietary RAID implementations to support infrastructure availability and capacity management.
This MIB describes the general information of raid.
Main OID:
hh3cRaid.1.3.6.1.4.1.25506.10.4
53
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
hh3cRaidThis MIB describes the general information of raid. MODULE-IDENTITY .1.3.6.1.4.1.25506.10.4 |
hh3cRaidMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.4.1 |
hh3cRaidCapacityTable OBJECT IDENTIFIER .1.3.6.1.4.1.25506.10.4.1.1 |
hh3cPrimaryRaidCountThis object identifies the maximal number of primary raids supported.ro Integer32 .1.3.6.1.4.1.25506.10.4.1.1.1 |
hh3cRaidTableThis table containing some property information of the array. SEQUENCE OF Hh3cRaidEntry .1.3.6.1.4.1.25506.10.4.1.2 |
hh3cRaidEntryAn entry containing management information applicable to create array resource. Hh3cRaidEntry .1.3.6.1.4.1.25506.10.4.1.2.1 |
hh3cRaidNameThis object identifies the name of the array.ro OCTET STRING .1.3.6.1.4.1.25506.10.4.1.2.1.1 |
hh3cRaidIdThis object describes the identification of the array.ro Integer32 .1.3.6.1.4.1.25506.10.4.1.2.1.2 |
hh3cRaidUuidThis object describes the UUID of the array.ro Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.2.1.3 |
hh3cRaidLevelThis object identifies the type of array. The value 'jbod' means just a bunch of disks, the value 'raid0' means RAID Level 0, and so on.rw Enumeration .1.3.6.1.4.1.25506.10.4.1.2.1.4 |
hh3cRaidTimestampThis object identifies the system time when the array is created.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.10.4.1.2.1.5 |
hh3cRaidDiskListThis object describes a list of the disk composed the array, each two bytes with network-byte order means a single entity index of the disk.rw OCTET STRING .1.3.6.1.4.1.25506.10.4.1.2.1.6 |
hh3cRaidOwnerThis object identifies the owner of the array.rw Hh3cStorageOwnerType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.2.1.7 |
hh3cRaidSizeThis object describes the size of array's total space. The units is million bytes.ro Integer32 .1.3.6.1.4.1.25506.10.4.1.2.1.8 |
hh3cRaidFreeSizeThis object describes the size of array's vacancy space. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.25506.10.4.1.2.1.9 |
hh3cRaidAutoSyncThis object identifies if the raid should be synchro automatically when created.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.10.4.1.2.1.10 |
hh3cRaidRowStatusThis object describes the actions to crate or delete an array.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.4.1.2.1.11 |
hh3cRaidManageTableThis table containing some management information of the array. SEQUENCE OF Hh3cRaidManageEntry .1.3.6.1.4.1.25506.10.4.1.3 |
hh3cRaidManageEntryAn entry containing management information applicable to particular array resource. Hh3cRaidManageEntry .1.3.6.1.4.1.25506.10.4.1.3.1 |
hh3cRaidLocationStateThis object identifies if the array can be located.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.3.1.1 |
hh3cRaidActionThis object identifies the actions to operating the array. When read, this object always returns the value 'invalid'.rw Enumeration .1.3.6.1.4.1.25506.10.4.1.3.1.2 |
hh3cRaidRunStateThis object identifies the state of the array. The value 'normal' means array works well. The value 'degraded' means array has degraded. The value 'failed' means some disks met failure and array has failed.ro Enumeration .1.3.6.1.4.1.25506.10.4.1.3.1.3 |
hh3cRaidAutoRebuildThis object identifies if the array can be auto rebuild.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.3.1.4 |
hh3cRaidSyncPercentageThis object describes the percentage of progress when the array is synchronizing. The value is equal to '100' when the progress has finished.ro Integer32 .1.3.6.1.4.1.25506.10.4.1.3.1.5 |
hh3cRaidHideStateThis object identifies if the array is hided. When the value of this object is equal to 'enable', the array will be hided and the files on it can not be accessed by any user.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.3.1.6 |
hh3cRaidLvRestoreThis object identifies an action to restore all the logic volume resources.rw Hh3cStorageActionType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.3.1.7 |
hh3cRaidTypeThis object identifies the physical type of an array. The value 'virtualDevice' means if a array is prepared for virtual device, it can be used to create LV, for exampe, it is can be split into a lot of LV, or be a part of LV. The value 'directDevice' means if a array is prepared for direct device, it can be used to create a LV which type is direct. Unlike virtual devices, they cannot be combined or split into multiple logical devices. The value 'serviceEnabledDevice' means if a array is prepared for service-enabled device, it can be used to create a LV which type is service-enabled. Unlike virtual devices, they cannot be combined or split into multiple logical devices. The value 'unassigned' means it is the original status of a array, if a array is unassigned, it can't be used to create LV.rw Enumeration .1.3.6.1.4.1.25506.10.4.1.3.1.8 |
hh3cRaidCacheTableThis table containing some property information and management information of the array cache. SEQUENCE OF Hh3cRaidCacheEntry .1.3.6.1.4.1.25506.10.4.1.4 |
hh3cRaidCacheEntryAn entry containing management information applicable to particular array cache resource. Hh3cRaidCacheEntry .1.3.6.1.4.1.25506.10.4.1.4.1 |
hh3cRaidReadCacheThis object identifies the state of read cache. If the value of this object is set to 'disable', the associated percentage of cache hit may be invalid.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.4.1.1 |
hh3cRaidReadCacheHitPeriodThis object describes the period during which how often the date matched with the cache when read. The units is minute.rw Integer32 .1.3.6.1.4.1.25506.10.4.1.4.1.2 |
hh3cRaidReadCacheAverageRateThis object describes the average percentage of cache hit when read.ro Integer32 .1.3.6.1.4.1.25506.10.4.1.4.1.3 |
hh3cRaidReadCachePhaseRateThis object describes the percentage of cache hit when read during the period set by the hh3cRaidReadCacheHitPeriod object.ro Integer32 .1.3.6.1.4.1.25506.10.4.1.4.1.4 |
hh3cRaidWriteCacheThis object identifies the state of write cache. If the value of this object is set to 'disable', the associated percentage of cache hit may be invalid.rw Hh3cStorageEnableState (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.4.1.5 |
hh3cRaidWriteCacheHitPeriodThis object describes the period during which how often the date matched with the cache when writed. The units is minute.rw Integer32 .1.3.6.1.4.1.25506.10.4.1.4.1.6 |
hh3cRaidWriteCacheAverageRateThis object describes the average percentage of cache hit when writed.ro Integer32 .1.3.6.1.4.1.25506.10.4.1.4.1.7 |
hh3cRaidWriteCachePhaseRateThis object describes the percentage of cache hit when write during the period set by the hh3cRaidWriteCacheHitPeriod object.ro Integer32 .1.3.6.1.4.1.25506.10.4.1.4.1.8 |
hh3cRaidWriteCacheFlushThis object identifies an action to flushing the write cache.rw Hh3cStorageActionType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.4.1.9 |
hh3cRaidSpareDiskTableThis table described the spare hot disk information. SEQUENCE OF Hh3cRaidSpareDiskEntry .1.3.6.1.4.1.25506.10.4.1.5 |
hh3cRaidSpareDiskEntryAn entry containing management information applicable to a spare hot disk. Hh3cRaidSpareDiskEntry .1.3.6.1.4.1.25506.10.4.1.5.1 |
hh3cRaidSpareDiskRowStatusThis object describes the actions to create or delete spare hot disk.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.4.1.5.1.1 |
hh3cFreezeRaidTableThis table described the freezed raid management. SEQUENCE OF Hh3cFreezeRaidEntry .1.3.6.1.4.1.25506.10.4.1.6 |
hh3cFreezeRaidEntryAn entry containing management information applicable to manage the freezed raid. Hh3cFreezeRaidEntry .1.3.6.1.4.1.25506.10.4.1.6.1 |
hh3cFreezeRaidUuidThis object describes the uuid of the freezed raid. Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.6.1.1 |
hh3cFreezeRaidNameThis object describes the name of the freezed raid.rw OCTET STRING .1.3.6.1.4.1.25506.10.4.1.6.1.2 |
hh3cFreezeRaidRowStatusThis object describes the actions to manage the freezed raid. Only the value 'destroy' is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.4.1.6.1.3 |
hh3c3rdRaidTableThis table described the 3rd raid management. SEQUENCE OF Hh3c3rdRaidEntry .1.3.6.1.4.1.25506.10.4.1.7 |
hh3c3rdRaidEntryAn entry containing management information applicable to manage the 3rd raid. Hh3c3rdRaidEntry .1.3.6.1.4.1.25506.10.4.1.7.1 |
hh3c3rdRaidUuidThis object describes the uuid of the 3rd raid. Hh3cRaidIDType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.7.1.1 |
hh3c3rdRaidNameThis object describes the name of the 3rd raid.ro OCTET STRING .1.3.6.1.4.1.25506.10.4.1.7.1.2 |
hh3c3rdRaidOwnerThis object describes the owner of the 3rd raid.ro OCTET STRING .1.3.6.1.4.1.25506.10.4.1.7.1.3 |
hh3c3rdRaidImportThis object describes the owner for the 3rd raid. When read, the value 'none' will be get. If the action is executed successfully, the 3rd raid will become a primary raid, and this entry will be deleted automatically.rw Hh3cStorageOwnerType (HH3C-STORAGE-REF-MIB) .1.3.6.1.4.1.25506.10.4.1.7.1.4 |
hh3c3rdRaidRowStatusThis object describes the actions to manage the 3rd raid. Only the value 'destroy' is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.10.4.1.7.1.5 |