GSWB-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
50
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
fujitsu OBJECT IDENTIFIER .1.3.6.1.4.1.211 |
RFC1155-SMI Unknown .1.3.6.1.4.1.211 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.211.1 |
iaServer OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31 |
primequest OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1 |
switch OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3 |
gswb OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1 |
fujitsu-gswbProd OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.1 |
swProperty OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.1.1 |
swModule OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.1.1.1 |
addressTableFullThe trap is sent whenever the address table is
full. TRAP-TYPE .1.3.6.1.4.1.211.1.31.1.3.1.1.1.1.0.1 |
agentConfigInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.2 |
agentBasicInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.2.1 |
agentRuntimeSwVersionThis is a textual description of the runtime software version
and revision. If the version number is one and revision number
is zero agentRuntimeSwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.211.1.31.1.3.1.2.1.1 |
swDevPackage OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.3 |
swDevInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.3.1 |
swDevInfoSystemUpTimeThe value of sysUpTime at the time the switch entered its
current operational state. If the current state was entered
prior to the last re-initialization, then this object contains
a zero value. This value is in units of seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.211.1.31.1.3.1.3.1.1 |
swDevInfoSystemLedStatusother(1),
Speed010M(2),
Speed100M(3),
Speed001G(4),
Speed010G(5),
NoExisting(129),
NotLink(130),
PortDisable(131),
Link(132),
Active(133)ro OCTET STRING .1.3.6.1.4.1.211.1.31.1.3.1.3.1.2 |
swPortPackage OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.4 |
swPortInfoTableA table that contains information about every port. SEQUENCE OF SwPortInfoEntry .1.3.6.1.4.1.211.1.31.1.3.1.4.1 |
swPortInfoEntryA list of information for each port of the device. SwPortInfoEntry .1.3.6.1.4.1.211.1.31.1.3.1.4.1.1 |
swPortInfoPortIndexThis object indicates the module's port number.(1..Max port
number in the module)ro INTEGER .1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.1 |
swPortInfoTypeThis object indicates the connector type of this port.ro Enumeration .1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.2 |
swPortInfoLinkStatusThis object indicates the port link status.ro Enumeration .1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.3 |
swPortInfoNwayStatusThis object indicates the port speed and duplex mode.ro Enumeration .1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.4 |
swPortInfoFlowCtrlStatusThis object indicates the port flow control status.ro Enumeration .1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.5 |
swPortTrunkPackage OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.6 |
swPortTrunkTableThis table specifys which ports group a set of ports(up to 8)
into a single logical link. SEQUENCE OF SwPortTrunkEntry .1.3.6.1.4.1.211.1.31.1.3.1.6.1 |
swPortTrunkEntryA list of information specifies which ports group a set of
ports(up to 8) into a single logical link. SwPortTrunkEntry .1.3.6.1.4.1.211.1.31.1.3.1.6.1.1 |
swPortTrunkIndexThe index of logical port trunk.The device max support 7 trunk
groups. The trunk group number depend on the existence of
module. INTEGER .1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.1 |
swPortTrunkNameThe name of logical port trunk.ro DisplayString .1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.2 |
swPortTrunkLoadBalanceother(1)
src-mac(2)
dst-mac(3)
src-dst-mac(4)
src-ip(5)
dst-ip(6)
src-dst-ip(7)ro Enumeration .1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.3 |
swPortTrunkMemberPortsThe members of the port trunk.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.4 |
swIGMPPackage OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.31.1.3.1.7 |
swIGMPStatusThis object indicates the status of this switch.
other(1) - this switch is currently in use but the conditions
under which it will remain so are different from each of the
following values.
disabled(2) - IGMP funtion is disabled for this switch.
enabled(3) - IGMP funtion is enabled for this switch.ro Enumeration .1.3.6.1.4.1.211.1.31.1.3.1.7.1 |
swIGMPEnableVlanCountro INTEGER .1.3.6.1.4.1.211.1.31.1.3.1.7.2 |
swIGMPMulticastTableCountro INTEGER .1.3.6.1.4.1.211.1.31.1.3.1.7.3 |
swIGMPInfoTableThe table contains the number current IGMP query packets which
is captured by this device, as well as the IGMP query packets
sent by the device. SEQUENCE OF SwIGMPInfoEntry .1.3.6.1.4.1.211.1.31.1.3.1.7.4 |
swIGMPInfoEntryInformation about current IGMP query information, provided that
swIGMPStatus and swIGMPQueryState of associated VLAN
entry are all enabled. SwIGMPInfoEntry .1.3.6.1.4.1.211.1.31.1.3.1.7.4.1 |
swIGMPInfoVidThis object indicates the Vid of associated IGMP info table
entry. It follows swIGMPCtrlVid in the associated entry of
IGMP control table (swIGMPCtrlTable). VlanId .1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.1 |
swIGMPInfoGeneralQueryCountThis object indicates the number of query packets received
since the IGMP function enabled, in per-VLAN basis.ro Counter .1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.2 |
swIGMPInfoSpecificQueryCountThis object indicates the send count of IGMP query messages, in
per-VLAN basis. In case of IGMP timer expiration, the switch
sends IGMP query packets to related VLAN member ports and
increment this object by 1.ro Counter .1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.3 |
swIGMPInfoLeaveGroupCountThis object indicates the send count of IGMP query messages, in
per-VLAN basis. In case of IGMP timer expiration, the switch
sends IGMP query packets to related VLAN member ports and
increment this object by 1.ro Counter .1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.4 |
swIGMPTableThe table containing current IGMP information which captured
by this device, provided that swIGMPStatus and swIGMPQueryState
of associated VLAN entry are all enabled. Note that the
priority of IGMP table entries is lower than Filtering Table,
i.e. if there is a table hash collision between the entries of
IGMP Table and Filtering Table inside the switch H/W address
table, then Filtering Table entry overwrite the colliding
entry of IGMP Table. See swFdbFilterTable description also. SEQUENCE OF SwIGMPEntry .1.3.6.1.4.1.211.1.31.1.3.1.7.5 |
swIGMPEntryInformation about current IGMP information which captured by
this device , provided that swIGMPStatus and swIGMPQueryState
of associated VLAN entry are all enabled. SwIGMPEntry .1.3.6.1.4.1.211.1.31.1.3.1.7.5.1 |
swIGMPVidThis object indicates the Vid of individual IGMP table entry.
It shows the Vid of IGMP report information captured on
network. VlanId .1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.1 |
swIGMPGroupMacAddrThis object is identify group ip address which is captured
from IGMP packet, in per-Vlan basis. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.2 |
swIGMPStaticFlagro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.3 |
swIGMPPortMapThis object indicates which ports are belong to the same
multicast group, in per-Vlan basis. Each multicast group has a
octect string to indicate with port map. The most significant
bit represents the lowest numbered port, and the least
significant bit represents the highest numbered port.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.4 |
swIGMPIpGroupReportCountThis object indicate how much report packet was receive by our
device corresponding with this entry from IGMP function enabled,
in per-Vlan basis. .ro Counter .1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.5 |