FJDARY-E102
AI MIB Summary
Standard SNMP MIB module defining data structures for FJDARY-E102.
645
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
645 total| Object Name |
|---|
fujitsu OBJECT IDENTIFIER .1.3.6.1.4.1.211 |
RFC1213-MIB Unknown .1.3.6.1.4.1.211 |
product OBJECT IDENTIFIER .1.3.6.1.4.1.211.1 |
storage OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21 |
nsp OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1 |
fjdarye102 OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102 |
fjdarySsp OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.1 |
fjdarySspMachineIdThis value indicates the identification number of this system.
ttssssssssssssmmmmmmmmmmmmccssssssssssss
| | | | |
| | | | +-serial number(12byte)
| | | +-check code(2byte)
| | +-model name(12byte)
| +-series name(12byte)
+-type code(2byte)ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.1.1 |
fjdarySspConfigDateThe last date when the configuration was applied.
yyyymmddHHMMSS
| | | | | |
| | | | | +-second
| | | | +-minute
| | | +-hour
| | +-day
| +-month
+-yearro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.21.1.102.1.2 |
fjdarySspWwnnThe value of this object indecates the World Wide Node Name.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.1.3 |
fjdarySspVenderIdThe value of this object indecates the Vender ID.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.1.4 |
fjdarySspProductIdThe value of this object indecates the Product ID.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.1.5 |
fjdarySspBoxIdThis value of a meaning within a user system. An initial value is the
same as fjdarySspMachineId.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.1.6 |
fjdarySspMaintenanceServiceLevelThe value of this object indecates the support level of maintenance
service. Level2 supports interface that strengthens the security
level from level1.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.1.7 |
fjdaryPconfig OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2 |
fjdaryCm OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.1 |
fjdaryCmCountThe number of CM(controller module)'s informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.1.1 |
fjdaryCmTable SEQUENCE OF FjdaryCmEntry .1.3.6.1.4.1.211.1.21.1.102.2.1.2 |
fjdaryCmEntry FjdaryCmEntry .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1 |
fjdaryCmIndexThe value of this object uniquely identifies this fjdaryCm entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.1 |
fjdaryCmItemIdThe value of this object indicates the identification number
of this CM.
the following definition:
0x0100MM00
|
+-fjdaryCmModuleIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.2 |
fjdaryCmStatusThe value of this object indicates the state of this CM.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.3 |
fjdaryCmSubStatusThe value of this object indicates the state of this CM.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.4 |
fjdaryCmModuleIdThe value of this object indicates the module indicates of this CM.
0x10-0x1F shows CM. bit0-2 shows the CM slot number.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.5 |
fjdaryCmRoleThe value of this object indicates the role of this CM.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.6 |
fjdaryCmPartNoThe value of this object indicates the Part No of this CM.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.7 |
fjdaryCmSerialNoThe value of this object indicates the Serial No of this CM.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.8 |
fjdaryCmRevisionThe value of this object indicates the Revision of this CM.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.1.2.1.9 |
fjdaryCmcpu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.2 |
fjdaryCmcpuCountThe number of CM CPU informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.2.1 |
fjdaryCmcpuTable SEQUENCE OF FjdaryCmcpuEntry .1.3.6.1.4.1.211.1.21.1.102.2.2.2 |
fjdaryCmcpuEntry FjdaryCmcpuEntry .1.3.6.1.4.1.211.1.21.1.102.2.2.2.1 |
fjdaryCmcpuIndexThe value of this object uniquely identifies this fjdaryCmcpu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.1 |
fjdaryCmcpuItemIdThe value of this object indicates the identification number
of this CM CPU.
the following definition:
0x0100MM00
|
+-fjdaryCmcpuModuleIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.2 |
fjdaryCmcpuStatusThe value of this object indicates the state of this CM CPU.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.3 |
fjdaryCmcpuSubStatusThe value of this object indicates the state of this CM CPU.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.4 |
fjdaryCmcpuModuleIdThe value of this object indicates the module indicates of this
CM CPU.
0x10-0x1F shows CM. bit0-2 shows the CM slot number and bit3 shows
CPU number.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.5 |
fjdaryCmcpuRoleThe value of this object indicates the role of this CM CPU.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.2.2.2.1.6 |
fjdaryCa OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.3 |
fjdaryCaCountThe number of CA(channel adapter)'s informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.3.1 |
fjdaryCaTable SEQUENCE OF FjdaryCaEntry .1.3.6.1.4.1.211.1.21.1.102.2.3.2 |
fjdaryCaEntry FjdaryCaEntry .1.3.6.1.4.1.211.1.21.1.102.2.3.2.1 |
fjdaryCaIndexThe value of this object uniquely identifies this fjdaryCa entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.1 |
fjdaryCaItemIdThe value of this object indicates the identification number
of this CA.
the following definition:
0x1000MM00
|
+-fjdaryCaModuleIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.2 |
fjdaryCaStatusThe value of this object indicates the state of this CA.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.3 |
fjdaryCaSubStatusThe value of this object indicates the state of this CA.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.4 |
fjdaryCaModuleIdThe value of this object indicates the module indicates of this CA.
0x40-0x7F shows CA. bit0-2 shows the CM slot number.
bit4-5 shows the CA slot number in CM.
bit3 shows the processor number in CA.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.5 |
fjdaryCaTypeThe value of this object indicates the type of this CA.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.3.2.1.6 |
fjdaryCmmemory OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.4 |
fjdaryCmmemoryCountThe number of CM memory's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.4.1 |
fjdaryCmmemoryTable SEQUENCE OF FjdaryCmmemoryEntry .1.3.6.1.4.1.211.1.21.1.102.2.4.2 |
fjdaryCmmemoryEntry FjdaryCmmemoryEntry .1.3.6.1.4.1.211.1.21.1.102.2.4.2.1 |
fjdaryCmmemoryIndexThe value of this object uniquely identifies this fjdaryCmmemory
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.1 |
fjdaryCmmemoryItemIdThe value of this object indicates the identification number
of this CM memory.
the following definition:
0x0b00MM00
|
+-fjdaryCmModuleIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.2 |
fjdaryCmmemoryStatusThe value of this object indicates the state of this CM memory.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.3 |
fjdaryCmmemorySubStatusThe value of this object indicates the state of this CM memory.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.4 |
fjdaryCmmemoryCapacityThe value of this object indicates the capacity of this CM memory.
The unit is MB.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.5 |
fjdaryCmmemoryPartNoThe value of this object indicates the Part No of this CM memory.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.6 |
fjdaryCmmemorySerialNoThe value of this object indicates the Serial No of this CM memory.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.4.2.1.7 |
fjdaryBud OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.5 |
fjdaryBudCountThe number of BUD's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.5.1 |
fjdaryBudTable SEQUENCE OF FjdaryBudEntry .1.3.6.1.4.1.211.1.21.1.102.2.5.2 |
fjdaryBudEntry FjdaryBudEntry .1.3.6.1.4.1.211.1.21.1.102.2.5.2.1 |
fjdaryBudIndexThe value of this object uniquely identifies this fjdaryBud entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.5.2.1.1 |
fjdaryBudItemIdThe value of this object indicates the identification number
of this BUD.
the following definition:
0x0c00MM00
|
+-fjdaryCmModuleIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.5.2.1.2 |
fjdaryBudStatusThe value of this object indicates the state of this BUD.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.5.2.1.3 |
fjdaryBudSubStatusThe value of this object indicates the state of this BUD.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.5.2.1.4 |
fjdaryFrt OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.6 |
fjdaryFrtCountThe number of FRT's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.6.1 |
fjdaryFrtTable SEQUENCE OF FjdaryFrtEntry .1.3.6.1.4.1.211.1.21.1.102.2.6.2 |
fjdaryFrtEntry FjdaryFrtEntry .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1 |
fjdaryFrtIndexThe value of this object uniquely identifies this fjdaryFrt entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.1 |
fjdaryFrtItemIdThe value of this object indicates the identification number
of this FRT.
the following definition:
0x4000MM00
|
+-fjdaryFrtModuleIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.2 |
fjdaryFrtStatusThe value of this object indicates the state of this FRT.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.3 |
fjdaryFrtSubStatusThe value of this object indicates the state of this FRT.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.4 |
fjdaryFrtModuleIdThe value of this object indicates the module indicates of this FRT.
0xF0-0xF3 shows FRT. bit0-3 shows the FRT slot number.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.5 |
fjdaryFrtFirmInfoThe value of this object indicates the firmware information of this
FRT.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.6 |
fjdaryFrtPartNoThe value of this object indicates the Part No of this FRT.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.7 |
fjdaryFrtSerialNoThe value of this object indicates the Serial No of this FRT.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.8 |
fjdaryFrtRevisionThe value of this object indicates the Revision of this FRT.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.6.2.1.9 |
fjdaryBrt OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.7 |
fjdaryBrtCountThe number of BRT's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.7.1 |
fjdaryBrtTable SEQUENCE OF FjdaryBrtEntry .1.3.6.1.4.1.211.1.21.1.102.2.7.2 |
fjdaryBrtEntry FjdaryBrtEntry .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1 |
fjdaryBrtIndexThe value of this object uniquely identifies this fjdaryBrt entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.1 |
fjdaryBrtItemIdThe value of this object indicates the identification number
of this BRT.
the following definition:
0x5000MM00
|
+-fjdaryBrtModuleIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.2 |
fjdaryBrtStatusThe value of this object indicates the state of this BRT.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.3 |
fjdaryBrtSubStatusThe value of this object indicates the state of this BRT.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.4 |
fjdaryBrtModuleIdThe value of this object indicates the module indicates of this BRT.
0xB0-0xBF shows BRT. bit0-3 shows the BRT slot number.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.5 |
fjdaryBrtPartNoThe value of this object indicates the Part No of this BRT.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.6 |
fjdaryBrtSerialNoThe value of this object indicates the Serial No of this BRT.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.7 |
fjdaryBrtRevisionThe value of this object indicates the Revision of this BRT.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.7.2.1.8 |
fjdarySvc OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.8 |
fjdarySvcCountThe number of SVC's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.8.1 |
fjdarySvcTable SEQUENCE OF FjdarySvcEntry .1.3.6.1.4.1.211.1.21.1.102.2.8.2 |
fjdarySvcEntry FjdarySvcEntry .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1 |
fjdarySvcIndexThe value of this object uniquely identifies this fjdarySvc entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.1 |
fjdarySvcItemIdThe value of this object indicates the identification number
of this SVC.
the following definition:
0x6000MM00
|
+-fjdarySvcModuleIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.2 |
fjdarySvcStatusThe value of this object indicates the state of this SVC.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.3 |
fjdarySvcSubStatusThe value of this object indicates the state of this SVC.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.4 |
fjdarySvcModuleIdThe value of this object indicates the module indicates of this SVC.
0xE0-0xE1 shows SVC. bit0-3 shows the SVC slot number.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.5 |
fjdarySvcFirmInfoThe value of this object indicates the firmware information of this
SVC.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.6 |
fjdarySvcPartNoThe value of this object indicates the Part No of this SVC.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.7 |
fjdarySvcSerialNoThe value of this object indicates the Serial No of this SVC.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.8 |
fjdarySvcRevisionThe value of this object indicates the Revision of this SVC.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.8.2.1.9 |
fjdaryFanu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.9 |
fjdaryFanuCountThe number of FANU's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.9.1 |
fjdaryFanuTable SEQUENCE OF FjdaryFanuEntry .1.3.6.1.4.1.211.1.21.1.102.2.9.2 |
fjdaryFanuEntry FjdaryFanuEntry .1.3.6.1.4.1.211.1.21.1.102.2.9.2.1 |
fjdaryFanuIndexThe value of this object uniquely identifies this fjdaryFanu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.1 |
fjdaryFanuItemIdThe value of this object indicates the identification number
of this FANU.
the following definition:
0x7100SS00
|
+-slot numberro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.2 |
fjdaryFanuStatusThe value of this object indicates the state of this FANU.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.3 |
fjdaryFanuSubStatusThe value of this object indicates the state of this FANU.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.4 |
fjdaryFanuPartNoThe value of this object indicates the Part No of this FANU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.5 |
fjdaryFanuSerialNoThe value of this object indicates the Serial No of this FANU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.6 |
fjdaryFanuRevisionThe value of this object indicates the Revision of this FANU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.9.2.1.7 |
fjdaryOpnl OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.10 |
fjdaryOpnlCountThe number of OPNL's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.10.1 |
fjdaryOpnlTable SEQUENCE OF FjdaryOpnlEntry .1.3.6.1.4.1.211.1.21.1.102.2.10.2 |
fjdaryOpnlEntry FjdaryOpnlEntry .1.3.6.1.4.1.211.1.21.1.102.2.10.2.1 |
fjdaryOpnlIndexThe value of this object uniquely identifies this fjdaryOpnl entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.10.2.1.1 |
fjdaryOpnlItemIdThe value of this object indicates the identification number
of this OPNL.
the following definition:
0x72000000ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.10.2.1.2 |
fjdaryOpnlStatusThe value of this object indicates the state of this OPNL.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.10.2.1.3 |
fjdaryOpnlSubStatusThe value of this object indicates the state of this OPNL.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.10.2.1.4 |
fjdaryBbu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.11 |
fjdaryBbuCountThe number of BBU's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.11.1 |
fjdaryBbuTable SEQUENCE OF FjdaryBbuEntry .1.3.6.1.4.1.211.1.21.1.102.2.11.2 |
fjdaryBbuEntry FjdaryBbuEntry .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1 |
fjdaryBbuIndexThe value of this object uniquely identifies this fjdaryBbu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.1 |
fjdaryBbuItemIdThe value of this object indicates the identification number
of this BBU.
the following definition:
0x7500SS00
|
+-slot numberro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.2 |
fjdaryBbuStatusThe value of this object indicates the state of this BBU.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.3 |
fjdaryBbuSubStatusThe value of this object indicates the state of this BBU.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.4 |
fjdaryBbuCapacityThe value of this object indicates the capacity of this BBU.
The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.5 |
fjdaryBbuPartNoThe value of this object indicates the Part No of this BBU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.6 |
fjdaryBbuSerialNoThe value of this object indicates the Serial No of this BBU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.7 |
fjdaryBbuRevisionThe value of this object indicates the Revision of this BBU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.11.2.1.8 |
fjdaryCe OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.12 |
fjdaryCeCountThe number of CE(controller enclosure)'s informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.12.1 |
fjdaryCeTable SEQUENCE OF FjdaryCeEntry .1.3.6.1.4.1.211.1.21.1.102.2.12.2 |
fjdaryCeEntry FjdaryCeEntry .1.3.6.1.4.1.211.1.21.1.102.2.12.2.1 |
fjdaryCeIndexThe value of this object uniquely identifies this fjdaryCe entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.12.2.1.1 |
fjdaryCeItemIdThe value of this object indicates the identification number
of this CE.
the following definition:
0x70000000ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.12.2.1.2 |
fjdaryCeStatusThe value of this object indicates the state of this CE.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.12.2.1.3 |
fjdaryCeSubStatusThe value of this object indicates the state of this CE.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.12.2.1.4 |
fjdaryCeinletthml OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.13 |
fjdaryCeinletthmlCountThe number of CE inlet thermal sensor's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.13.1 |
fjdaryCeinletthmlTable SEQUENCE OF FjdaryCeinletthmlEntry .1.3.6.1.4.1.211.1.21.1.102.2.13.2 |
fjdaryCeinletthmlEntry FjdaryCeinletthmlEntry .1.3.6.1.4.1.211.1.21.1.102.2.13.2.1 |
fjdaryCeinletthmlIndexThe value of this object uniquely identifies this fjdaryCeinletthml
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.13.2.1.1 |
fjdaryCeinletthmlItemIdThe value of this object indicates the identification number
of this CE inlet thermal sensor.
the following definition:
0x7b000000ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.13.2.1.2 |
fjdaryCeinletthmlStatusThe value of this object indicates the state of this CE inlet thermal
sensor.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.13.2.1.3 |
fjdaryCeinletthmlSubStatusThe value of this object indicates the state of this CE inlet thermal
sensor.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.13.2.1.4 |
fjdaryCethml OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.14 |
fjdaryCethmlCountThe number of CE thermal sensor's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.14.1 |
fjdaryCethmlTable SEQUENCE OF FjdaryCethmlEntry .1.3.6.1.4.1.211.1.21.1.102.2.14.2 |
fjdaryCethmlEntry FjdaryCethmlEntry .1.3.6.1.4.1.211.1.21.1.102.2.14.2.1 |
fjdaryCethmlIndexThe value of this object uniquely identifies this fjdaryCethml entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.14.2.1.1 |
fjdaryCethmlItemIdThe value of this object indicates the identification number
of this CE thermal sensor.
the following definition:
0x7a000000ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.14.2.1.2 |
fjdaryCethmlStatusThe value of this object indicates the state of this CE thermal
sensor.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.14.2.1.3 |
fjdaryCethmlSubStatusThe value of this object indicates the state of this CE thermal
sensor.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.14.2.1.4 |
fjdaryCpsu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.15 |
fjdaryCpsuCountThe number of CPSU(power supply unit mounted on CE)'s informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.15.1 |
fjdaryCpsuTable SEQUENCE OF FjdaryCpsuEntry .1.3.6.1.4.1.211.1.21.1.102.2.15.2 |
fjdaryCpsuEntry FjdaryCpsuEntry .1.3.6.1.4.1.211.1.21.1.102.2.15.2.1 |
fjdaryCpsuIndexThe value of this object uniquely identifies this fjdaryCpsu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.1 |
fjdaryCpsuItemIdThe value of this object indicates the identification number
of this CPSU.
the following definition:
0x7300SS00
|
+-slot numberro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.2 |
fjdaryCpsuStatusThe value of this object indicates the state of this CPSU.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.3 |
fjdaryCpsuSubStatusThe value of this object indicates the state of this CPSU.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.4 |
fjdaryCpsuPartNoThe value of this object indicates the Part No of this CPSU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.5 |
fjdaryCpsuSerialNoThe value of this object indicates the Serial No of this CPSU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.6 |
fjdaryCpsuRevisionThe value of this object indicates the Revision of this CPSU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.15.2.1.7 |
fjdaryDe OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.16 |
fjdaryDeCountThe number of DE(drive enclosure)'s informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.16.1 |
fjdaryDeTable SEQUENCE OF FjdaryDeEntry .1.3.6.1.4.1.211.1.21.1.102.2.16.2 |
fjdaryDeEntry FjdaryDeEntry .1.3.6.1.4.1.211.1.21.1.102.2.16.2.1 |
fjdaryDeIndexThe value of this object uniquely identifies this fjdaryDe entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.1 |
fjdaryDeItemIdThe value of this object indicates the identification number
of this DE.
the following definition:
0xd000DD00
|
+-fjdaryDeIdro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.2 |
fjdaryDeStatusThe value of this object indicates the state of this DE.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.3 |
fjdaryDeSubStatusThe value of this object indicates the state of this DE.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.4 |
fjdaryDeIdThe value of this object indicates the identification of this DE.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.5 |
fjdaryDeTypeThe value of this object indicates the type of this DE.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.16.2.1.6 |
fjdaryIom OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.17 |
fjdaryIomCountThe number of IOM6's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.17.1 |
fjdaryIomTable SEQUENCE OF FjdaryIomEntry .1.3.6.1.4.1.211.1.21.1.102.2.17.2 |
fjdaryIomEntry FjdaryIomEntry .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1 |
fjdaryIomIndexThe value of this object uniquely identifies this fjdaryIom entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.1 |
fjdaryIomItemIdThe value of this object indicates the identification number
of this IOM6.
the following definition:
0x9000DDSS
| |
| +-slot number
+-DE IDro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.2 |
fjdaryIomStatusThe value of this object indicates the state of this IOM6.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.3 |
fjdaryIomSubStatusThe value of this object indicates the state of this IOM6.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.4 |
fjdaryIomFirmInfoThe value of this object indicates the firmware information of this
IOM6.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.5 |
fjdaryIomPartNoThe value of this object indicates the Part No of this IOM6.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.6 |
fjdaryIomSerialNoThe value of this object indicates the Serial No of this IOM6.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.7 |
fjdaryIomRevisionThe value of this object indicates the Revision of this IOM6.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.17.2.1.8 |
fjdaryPsu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.18 |
fjdaryPsuCountThe number of PSU(power supply unit)'s informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.18.1 |
fjdaryPsuTable SEQUENCE OF FjdaryPsuEntry .1.3.6.1.4.1.211.1.21.1.102.2.18.2 |
fjdaryPsuEntry FjdaryPsuEntry .1.3.6.1.4.1.211.1.21.1.102.2.18.2.1 |
fjdaryPsuIndexThe value of this object uniquely identifies this fjdaryPsu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.1 |
fjdaryPsuItemIdThe value of this object indicates the identification number
of this PSU.
the following definition:
0xd200DDSS
| |
| +-slot number
+-DE IDro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.2 |
fjdaryPsuStatusThe value of this object indicates the state of this PSU.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.3 |
fjdaryPsuSubStatusThe value of this object indicates the state of this PSU.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.4 |
fjdaryPsuPartNoThe value of this object indicates the Part No of this PSU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.5 |
fjdaryPsuSerialNoThe value of this object indicates the Serial No of this PSU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.6 |
fjdaryPsuRevisionThe value of this object indicates the Revision of this PSU.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.18.2.1.7 |
fjdaryDeinletthml OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.19 |
fjdaryDeinletthmlCountThe number of DE inlet thermal sensor's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.19.1 |
fjdaryDeinletthmlTable SEQUENCE OF FjdaryDeinletthmlEntry .1.3.6.1.4.1.211.1.21.1.102.2.19.2 |
fjdaryDeinletthmlEntry FjdaryDeinletthmlEntry .1.3.6.1.4.1.211.1.21.1.102.2.19.2.1 |
fjdaryDeinletthmlIndexThe value of this object uniquely identifies this fjdaryDeinletthml
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.19.2.1.1 |
fjdaryDeinletthmlItemIdThe value of this object indicates the identification number
of this DE inlet thermal sensor.
the following definition:
0xdb00DD00
|
+-DE IDro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.19.2.1.2 |
fjdaryDeinletthmlStatusThe value of this object indicates the state of this DE inlet thermal
sensor.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.19.2.1.3 |
fjdaryDeinletthmlSubStatusThe value of this object indicates the state of this DE inlet thermal
sensor.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.19.2.1.4 |
fjdaryDethml OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.20 |
fjdaryDethmlCountThe number of DE thermal sensor's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.20.1 |
fjdaryDethmlTable SEQUENCE OF FjdaryDethmlEntry .1.3.6.1.4.1.211.1.21.1.102.2.20.2 |
fjdaryDethmlEntry FjdaryDethmlEntry .1.3.6.1.4.1.211.1.21.1.102.2.20.2.1 |
fjdaryDethmlIndexThe value of this object uniquely identifies this fjdaryDethml entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.20.2.1.1 |
fjdaryDethmlItemIdThe value of this object indicates the identification number
of this DE thermal sensor.
the following definition:
0xda00DD00
|
+-DE IDro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.20.2.1.2 |
fjdaryDethmlStatusThe value of this object indicates the state of this DE thermal
sensor.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.20.2.1.3 |
fjdaryDethmlSubStatusThe value of this object indicates the state of this DE thermal
sensor.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.20.2.1.4 |
fjdaryDisk OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.21 |
fjdaryDiskCountThe number of DISK's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.21.1 |
fjdaryDiskTable SEQUENCE OF FjdaryDiskEntry .1.3.6.1.4.1.211.1.21.1.102.2.21.2 |
fjdaryDiskEntry FjdaryDiskEntry .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1 |
fjdaryDiskIndexThe value of this object uniquely identifies this fjdaryDisk entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.1 |
fjdaryDiskItemIdThe value of this object indicates the identification number
of this DISK.
the following definition:
0x8000DDSS
| |
| +-slot number
+-DE IDro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.2 |
fjdaryDiskStatusThe value of this object indicates the state of this DISK.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)
available : Normal state
broken : Abnormal state
(The data can not be guaranteed)
notavailable : Not available state
(Because the RAID group is not set)
notsupported : Unsupported error state
present : Undefined volume set state
readying : Data readying state
recovering : Data recovering state
partbroken : Abnormal state
spare : Using spare disk state
formatting : Data formatting state
unformatted : Unformatted state
notexist : Not exist
copying : Data copying statero Enumeration .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.3 |
fjdaryDiskSubStatusThe value of this object indicates the state of this DISK.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)
available : Normal state
broken : Abnormal state
(The data can not be guaranteed)
notavailable : Not available state
(Because the RAID group is not set)
notsupported : Unsupported error state
present : Undefined volume set state
readying : Data readying state
recovering : Data recovering state
partbroken : Abnormal state
spare : Using spare disk state
formatting : Data formatting state
unformatted : Unformatted state
notexist : Not exist
copying : Data copying statero Enumeration .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.4 |
fjdaryDiskCompStatusThe value of this object indicates the state of this DISK.
But, it doesn't become warning or alarm when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)
Not included in the RAID group and not spare become undefined.
Under the rebuild copyback become maintenance.ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.5 |
fjdaryDiskCompSubStatusThe value of this object indicates the state of this DISK.
It becomes warning and alarm while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)
Not included in the RAID group and not spare become undefined.
Under the rebuild copyback become maintenance.ro FjdaryComponentStatus .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.6 |
fjdaryDiskPlunThe value of this object indicates the PLUN of this DISK.
the following definition:
0xDDSS
| |
| +-slot number
+-DE IDro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.7 |
fjdaryDiskPurposeThe value of this object indicates the purpose of this DISK.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.8 |
fjdaryDiskTypeThe value of this object indicates the type of this DISK.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.9 |
fjdaryDiskWwnThe value of this object indicates the world wide name of this DISK.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.10 |
fjdaryDiskVenderIdThe value of this object indicates the vender of this DISK.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.11 |
fjdaryDiskProductIdThe value of this object indicates the product of this DISK.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.12 |
fjdaryDiskFwRevisionThe value of this object indicates the firmware revision of this
DISK.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.13 |
fjdaryDiskDateCodeThe value of this object indicates the date code of this DISK.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.14 |
fjdaryDiskCfgRevisionThe value of this object indicates the configuration revision of this
DISK.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.2.21.2.1.15 |
fjdaryLanport OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.2.22 |
fjdaryLanportCountThe number of LAN port's informations
(regardless of theier current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.22.1 |
fjdaryLanportTable SEQUENCE OF FjdaryLanportEntry .1.3.6.1.4.1.211.1.21.1.102.2.22.2 |
fjdaryLanportEntry FjdaryLanportEntry .1.3.6.1.4.1.211.1.21.1.102.2.22.2.1 |
fjdaryLanportIndexThe value of this object uniquely identifies this fjdaryLanport
entry. The number of the unit that mounts LAN port is shown.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.22.2.1.1 |
fjdaryLanportStatus0The value of this object indicates the MNT port state.
linkup : Link up state
undefined : Undefined state
linkdown : Link down state
unknown : Unknown statero Enumeration .1.3.6.1.4.1.211.1.21.1.102.2.22.2.1.2 |
fjdaryLanportStatus1The value of this object indicates the RMT port state.
linkup : Link up state
undefined : Undefined state
linkdown : Link down state
unknown : Unknown statero Enumeration .1.3.6.1.4.1.211.1.21.1.102.2.22.2.1.3 |
fjdaryLanportStatus2The value of this object indicates the FST port state.
linkup : Link up state
undefined : Undefined state
linkdown : Link down state
unknown : Unknown statero Enumeration .1.3.6.1.4.1.211.1.21.1.102.2.22.2.1.4 |
fjdaryLanportHwAdTable SEQUENCE OF FjdaryLanportHwAdEntry .1.3.6.1.4.1.211.1.21.1.102.2.22.3 |
fjdaryLanportHwAdEntry FjdaryLanportHwAdEntry .1.3.6.1.4.1.211.1.21.1.102.2.22.3.1 |
fjdaryLanportHwAdIndexThe value of this object uniquely identifies this fjdaryLanportHwAd
entry. The number of the unit that mounts LAN port is shown.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.2.22.3.1.1 |
fjdaryLanportHwAddress0The value of this object indicates the MNT port's MAC address.
If this value is not applicable, return all zero's.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.211.1.21.1.102.2.22.3.1.2 |
fjdaryLanportHwAddress1The value of this object indicates the RMT port's MAC address.
If this value is not applicable, return all zero's.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.211.1.21.1.102.2.22.3.1.3 |
fjdaryLanportHwAddress2The value of this object indicates the FST port's MAC address.
If this value is not applicable, return all zero's.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.211.1.21.1.102.2.22.3.1.4 |
fjdaryLconfig OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3 |
fjdaryCaPort OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.1 |
fjdaryCaPortCountThe number of CA port's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.1.1 |
fjdaryCaPortTable SEQUENCE OF FjdaryCaPortEntry .1.3.6.1.4.1.211.1.21.1.102.3.1.2 |
fjdaryCaPortEntry FjdaryCaPortEntry .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1 |
fjdaryCaPortIndexThe value of this object uniquely identifies this fjdaryCaPort entry.
Ascending order of fjdaryCaModuleId.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.1 |
fjdaryCaPortPortInfoThe value of this object indicates the CA port information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Reserved |Factor |Port No |
+++++
0x04|Mapping |CM CPU MID |Reserved |
| Table No | | |
+++++
0x08|Security |Transfer |Reserved |CA Mode |
| Mode | Rate | | |
+++++
0x0c|Reserved |
: :
0x1c| |
+++++
0x20|Host |Method |Loop ID |Service |
| Connection | | | Class |
+++++
0x24|FC Frame Size |Reserved |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.2 |
fjdaryCaPortiscsiInfoThe value of this object indicates the CA port iscsi information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|iSCSI Flag |
+++++
0x04|Reserved |
: :
0x24| |
+++++
0x28|Valid |Reserved |
+++++
0x24|Reserved |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.3 |
fjdaryCaPortiscsiNameThe value of this object indicates an iscsi name of this CA port.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.4 |
fjdaryCaPortiscsiAliasNameThe value of this object indicates an iscsi alias name of this CA
port.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.5 |
fjdaryCaPortiscsiIpAddressThe value of this object indicates an iscsi ip address of this CA
port.ro IpAddress .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.6 |
fjdaryCaPortiscsiSubnetMaskThe value of this object indicates an iscsi subnet mask of this CA
port.ro IpAddress .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.7 |
fjdaryCaPortiscsiIsnsServerThe value of this object indicates an isns server ip address of this
CA port.ro IpAddress .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.8 |
fjdaryCaPortModeThe value of this object indicates the mode of this CA port.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.3.1.2.1.9 |
fjdaryOlu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.2 |
fjdaryOluCountThe number of OLU's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.2.1 |
fjdaryOluTable SEQUENCE OF FjdaryOluEntry .1.3.6.1.4.1.211.1.21.1.102.3.2.2 |
fjdaryOluEntry FjdaryOluEntry .1.3.6.1.4.1.211.1.21.1.102.3.2.2.1 |
fjdaryOluIndexThe value of this object uniquely identifies this fjdaryOlu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.2.2.1.1 |
fjdaryOluInfoTableThe value of this object indicates the OLU information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|OLU info#index*2 (96 bytes) |
+++++
0x60|OLU info#index*2+1 (96 bytes) |
+++++
OLU info#
byte 0 byte 1 byte 2 byte 3
+++++
0x00|OLUN |Status |
+++++
0x04|SLU Count |Reserved |Pool No |
+++++
0x08|Reserved |
: :
0x14| |
+++++
0x18|SLUN 0x00 |SLUN 0x01 |
+++++
: :
+++++
0x34|SLUN 0x0E |SLUN 0x0F |
+++++
0x38|Reserved |
: :
0x5c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.2.2.1.2 |
fjdarySlu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.3 |
fjdarySluCountThe number of SLU's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.3.1 |
fjdarySluTable SEQUENCE OF FjdarySluEntry .1.3.6.1.4.1.211.1.21.1.102.3.3.2 |
fjdarySluEntry FjdarySluEntry .1.3.6.1.4.1.211.1.21.1.102.3.3.2.1 |
fjdarySluIndexThe value of this object uniquely identifies this fjdarySlu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.3.2.1.1 |
fjdarySluInfoTableThe value of this object indicates the SLU information.
Part of raid group or the entire volume is shown.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|SLUN |Status |
+++++
0x04|LU Type |Reserved |
+++++
0x08|RLUN |Temporary RLUN |
+++++
0x0c|MLUN |OLUN |
+++++
0x10|Reserved |
: :
0x1c| |
+++++
0x20|Start RLBA |
+ +
0x24| |
+++++
0x28|Temporary Start RLBA |
+ +
0x2c| |
+++++
0x30|Start OLBA |
+ +
0x34| |
+++++
0x38|OLBA Count |
+ +
0x3c| |
+++++
0x40|SLBA Count |
+ +
0x44| |
+++++
0x48|Temporary SLBA Count |
+ +
0x4c| |
+++++
0x50|Start SLBA for OLU |
+ +
0x54| |
+++++
0x58|SLBA Count for OLU |
+ +
0x5c| |
+++++
0x60|Virtual OLBA Count |
+ +
0x64| |
+++++
0x68|Reserved |
: :
0xac| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.3.2.1.2 |
fjdaryRlu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.4 |
fjdaryRluCountThe number of RLU's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.4.1 |
fjdaryRluTable SEQUENCE OF FjdaryRluEntry .1.3.6.1.4.1.211.1.21.1.102.3.4.2 |
fjdaryRluEntry FjdaryRluEntry .1.3.6.1.4.1.211.1.21.1.102.3.4.2.1 |
fjdaryRluIndexThe value of this object uniquely identifies this fjdaryRlu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.1 |
fjdaryRluInfoTable0The value of this object indicates the RLU information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|RLUN |Status |
+++++
0x04|Define |Current |Reserved |
| CM CPU MID | CM CPU MID | |
+++++
0x08|RAID Level |RLU Mode |Blockade |RLU Enable |
| | | | Flag |
+++++
0x0c|Reserved |Pool No |
+++++
0x10|RLBA Count |
+ +
0x14| |
+++++
0x18|Stripe Depth |
+++++
0x1c|Stripe Size |
+++++
0x20|Expanded RLUN |Temporary RLUN |
+++++
0x24|Reserved |
: :
0x2c| |
+++++
0x30|SLU Count |Reserved |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.2 |
fjdaryRluInfoTable1The value of this object indicates the RLU information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|SLUN 0x00 |SLUN 0x01 |
+++++
: :
+++++
0xfc|SLUN 0x7E |SLUN 0x7F |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.3 |
fjdaryRluInfoTable2The value of this object indicates the RLU information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|SLUN 0x80 |SLUN 0x81 |
+++++
: :
+++++
0xfc|SLUN 0xFE |Reserved |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.4 |
fjdaryRluInfoTable3The value of this object indicates the RLU information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Member Disk |Reserved |
| Count | |
+++++
0x04|DLUN 0x00 |DLUN 0x01 |
+++++
: :
+++++
0x20|DLUN 0x0E |DLUN 0x0F |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.4.2.1.5 |
fjdaryDlu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.5 |
fjdaryDluCountThe number of DLU's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.5.1 |
fjdaryDluTable SEQUENCE OF FjdaryDluEntry .1.3.6.1.4.1.211.1.21.1.102.3.5.2 |
fjdaryDluEntry FjdaryDluEntry .1.3.6.1.4.1.211.1.21.1.102.3.5.2.1 |
fjdaryDluIndexThe value of this object uniquely identifies this fjdaryDlu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.5.2.1.1 |
fjdaryDluInfoTableThe value of this object indicates the DLU information.
Information to relate RLU to DISK is shown.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|DLUN |Status |
+++++
0x04|RLUN |Member Disk |Reserved |
| | Number | |
+++++
0x08|Start DLBA |
+ +
0x0c| |
+++++
0x10|Block Count |
+ +
0x14| |
+++++
0x18|Stripe Depth |
+++++
0x1c|Stripe Size |
+++++
0x20|Member Disk |Reserved |
| Count | |
+++++
0x24|Reserved |
+++++
0x28|PLU in Use 0x00 |PLU in Use 0x01 |
+++++
: :
+++++
0x44|PLU in Use 0x0E |PLU in Use 0x0F |
+++++
0x48|Defined PLU 0x00 |Defined PLU 0x01 |
+++++
: :
+++++
0x64|Defined PLU 0x0E |Defined PLU 0x0F |
+++++
0x68|Reserved |
+ +
0x6c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.5.2.1.2 |
fjdaryMlu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.6 |
fjdaryMluCountThe number of MLU's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.6.1 |
fjdaryMluTable SEQUENCE OF FjdaryMluEntry .1.3.6.1.4.1.211.1.21.1.102.3.6.2 |
fjdaryMluEntry FjdaryMluEntry .1.3.6.1.4.1.211.1.21.1.102.3.6.2.1 |
fjdaryMluIndexThe value of this object uniquely identifies this fjdaryMlu entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.6.2.1.1 |
fjdaryMluInfoTableThe value of this object indicates the MLU information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|MLU info#index*5 (48 bytes) |
+++++
0x30|MLU info#index*5+1 (48 bytes) |
+++++
0x60|MLU info#index*5+2 (48 bytes) |
+++++
0x90|MLU info#index*5+3 (48 bytes) |
+++++
0xc0|MLU info#index*5+4 (48 bytes) |
+++++
MLU info#
byte 0 byte 1 byte 2 byte 3
+++++
0x00|MLUN |Status |
+++++
0x04|Type Index |MLU Mode |Reserved |
+++++
0x08|SLUN |Reserved |
+++++
0x0c|MLBA Count |
+++++
0x10|Reserved |
: :
0x2c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.6.2.1.2 |
fjdaryOpenmap OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.7 |
fjdaryOpenmapCountThe number of open volume mapping table's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.7.1 |
fjdaryOpenmapTable SEQUENCE OF FjdaryOpenmapEntry .1.3.6.1.4.1.211.1.21.1.102.3.7.2 |
fjdaryOpenmapEntry FjdaryOpenmapEntry .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1 |
fjdaryOpenmapIndexThe value of this object uniquely identifies this fjdaryOpenmap
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.1 |
fjdaryOpenmapInfoThe value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Map No |Reserved |CA MID |Port No |
+++++
0x04|LUN Mapping No |Valid Count |
+++++
0x08|Reserved |
: :
0x1c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.2 |
fjdaryOpenmapHostTable0The value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host 0x00 |Affinity Grp 0x00 |
+++++
0x04|Enable |Reserved |
| Access | |
+++++
: :
+++++
0xf8|Host 0x1F |Affinity Grp 0x1F |
+++++
0xfc|Enable |Reserved |
| Access | |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.3 |
fjdaryOpenmapHostTable1The value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host 0x20 |Affinity Grp 0x20 |
+++++
0x04|Enable |Reserved |
| Access | |
+++++
: :
+++++
0xf8|Host 0x3F |Affinity Grp 0x3F |
+++++
0xfc|Enable |Reserved |
| Access | |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.4 |
fjdaryOpenmapHostTable2The value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host 0x40 |Affinity Grp 0x40 |
+++++
0x04|Enable |Reserved |
| Access | |
+++++
: :
+++++
0xf8|Host 0x5F |Affinity Grp 0x5F |
+++++
0xfc|Enable |Reserved |
| Access | |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.5 |
fjdaryOpenmapHostTable3The value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host 0x60 |Affinity Grp 0x60 |
+++++
0x04|Enable |Reserved |
| Access | |
+++++
: :
+++++
0xf8|Host 0x7F |Affinity Grp 0x7F |
+++++
0xfc|Enable |Reserved |
| Access | |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.6 |
fjdaryOpenmapHostTable4The value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host 0x80 |Affinity Grp 0x80 |
+++++
0x04|Enable |Reserved |
| Access | |
+++++
: :
+++++
0xf8|Host 0x9F |Affinity Grp 0x9F |
+++++
0xfc|Enable |Reserved |
| Access | |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.7 |
fjdaryOpenmapHostTable5The value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host 0xA0 |Affinity Grp 0xA0 |
+++++
0x04|Enable |Reserved |
| Access | |
+++++
: :
+++++
0xf8|Host 0xBF |Affinity Grp 0xBF |
+++++
0xfc|Enable |Reserved |
| Access | |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.8 |
fjdaryOpenmapHostTable6The value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host 0xC0 |Affinity Grp 0xC0 |
+++++
0x04|Enable |Reserved |
| Access | |
+++++
: :
+++++
0xf8|Host 0xDF |Affinity Grp 0xDF |
+++++
0xfc|Enable |Reserved |
| Access | |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.9 |
fjdaryOpenmapHostTable7The value of this object indicates the open volume mapping table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host 0xE0 |Affinity Grp 0xE0 |
+++++
0x04|Enable |Reserved |
| Access | |
+++++
: :
+++++
0xf8|Host 0xFF |Affinity Grp 0xFF |
+++++
0xfc|Enable |Reserved |
| Access | |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.7.2.1.10 |
fjdaryLunmap OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.8 |
fjdaryLunmapCountThe number of LUN mapping table's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.8.1 |
fjdaryLunmapTable SEQUENCE OF FjdaryLunmapEntry .1.3.6.1.4.1.211.1.21.1.102.3.8.2 |
fjdaryLunmapEntry FjdaryLunmapEntry .1.3.6.1.4.1.211.1.21.1.102.3.8.2.1 |
fjdaryLunmapIndexThe value of this object uniquely identifies this fjdaryLunmap entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.1 |
fjdaryLunmapInfoThe value of this object indicates the LUN mapping table information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN Map Number |Definition |Reserved |
+++++
0x04|LUN Map Name |
: :
0x10| |
+++++
0x14|Host Response Table No |Reserved |
+++++
0x18|Reserved |
+ +
0x1c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.2 |
fjdaryLunmapTable0The value of this object indicates the LUN mapping table information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN#000-OLU# |LUN#001-OLU# |
+++++
: :
+++++
0xfc|LUN#126-OLU# |LUN#127-OLU# |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.3 |
fjdaryLunmapTable1The value of this object indicates the LUN mapping table information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN#128-OLU# |LUN#129-OLU# |
+++++
: :
+++++
0xfc|LUN#254-OLU# |LUN#255-OLU# |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.4 |
fjdaryLunmapTable2The value of this object indicates the LUN mapping table information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN#256-OLU# |LUN#257-OLU# |
+++++
: :
+++++
0xfc|LUN#382-OLU# |LUN#383-OLU# |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.5 |
fjdaryLunmapTable3The value of this object indicates the LUN mapping table information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN#384-OLU# |LUN#385-OLU# |
+++++
: :
+++++
0xfc|LUN#510-OLU# |LUN#511-OLU# |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.8.2.1.6 |
fjdaryAffinityGrp OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.9 |
fjdaryAffinityGrpCountThe number of affinity group table's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.9.1 |
fjdaryAffinityGrpTable SEQUENCE OF FjdaryAffinityGrpEntry .1.3.6.1.4.1.211.1.21.1.102.3.9.2 |
fjdaryAffinityGrpEntry FjdaryAffinityGrpEntry .1.3.6.1.4.1.211.1.21.1.102.3.9.2.1 |
fjdaryAffinityGrpIndexThe value of this object uniquely identifies this fjdaryAffinityGrp
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.1 |
fjdaryAffinityGrpInfoThe value of this object indicates the affinity group table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Affinity Group Number |Definition |Reserved |
+++++
0x04|Affinity Group Name |
: :
0x10| |
+++++
0x14|Previous Affinity Group |Next Affinity Group |
| Number | Number |
+++++
0x18|Reserved |
+ +
0x1c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.2 |
fjdaryAffinityGrpTable0The value of this object indicates the affinity group table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN#000-OLU# |LUN#001-OLU# |
+++++
: :
+++++
0xfc|LUN#126-OLU# |LUN#127-OLU# |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.3 |
fjdaryAffinityGrpTable1The value of this object indicates the affinity group table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN#128-OLU# |LUN#129-OLU# |
+++++
: :
+++++
0xfc|LUN#254-OLU# |LUN#255-OLU# |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.4 |
fjdaryAffinityGrpTable2The value of this object indicates the affinity group table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN#256-OLU# |LUN#257-OLU# |
+++++
: :
+++++
0xfc|LUN#382-OLU# |LUN#383-OLU# |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.5 |
fjdaryAffinityGrpTable3The value of this object indicates the affinity group table
information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|LUN#384-OLU# |LUN#385-OLU# |
+++++
: :
+++++
0xfc|LUN#510-OLU# |LUN#511-OLU# |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.9.2.1.6 |
fjdaryHostwwn OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.10 |
fjdaryHostwwnCountThe number of host wwn table's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.10.1 |
fjdaryHostwwnTable SEQUENCE OF FjdaryHostwwnEntry .1.3.6.1.4.1.211.1.21.1.102.3.10.2 |
fjdaryHostwwnEntry FjdaryHostwwnEntry .1.3.6.1.4.1.211.1.21.1.102.3.10.2.1 |
fjdaryHostwwnIndexThe value of this object uniquely identifies this fjdaryHostwwn
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.10.2.1.1 |
fjdaryHostwwnWWNThe value of this object indicates the host wwn table information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Host WWN |
+ +
0x04| |
+++++
0x08|Host Response Table No |Valid Flag |Reserved |
+++++
0x0c|Reserved |
: :
0x1c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.10.2.1.2 |
fjdaryResetpath OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.11 |
fjdaryResetpathCountThe number of reset path group table's informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.11.1 |
fjdaryResetpathTable SEQUENCE OF FjdaryResetpathEntry .1.3.6.1.4.1.211.1.21.1.102.3.11.2 |
fjdaryResetpathEntry FjdaryResetpathEntry .1.3.6.1.4.1.211.1.21.1.102.3.11.2.1 |
fjdaryResetpathIndexThe value of this object uniquely identifies this fjdaryResetpath
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.11.2.1.1 |
fjdaryResetpathGroupThe value of this object indicates the reset path group table
information.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Reset Path Group (bitmap) |
: :
0x0c| |
+++++
Grouped CA is stored from bit0 in ascending order of
fjdaryCaModuleId.
bit 0: CA MID 0x40 Port#0
bit 1: CA MID 0x40 Port#1
bit 2: CA MID 0x41 Port#0
:
bit 127: CA MID 0x7F Port#1
The bit definition is as follows.
+++++
0x00|bit 7-0 |bit 15-8 |bit 23-16 |bit 31-24 |
+++++
0x04|bit 39-32 |bit 47-40 |bit 55-48 |bit 63-56 |
+++++
0x08|bit 71-64 |bit 79-72 |bit 87-80 |bit 95-88 |
+++++
0x0c|bit 103-96 |bit 111-104 |bit 119-112 |bit 127-120 |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.11.2.1.2 |
fjdaryHostiscsi OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.12 |
fjdaryHostiscsiCountThe number of host iscsi informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.12.1 |
fjdaryHostiscsiTable SEQUENCE OF FjdaryHostiscsiEntry .1.3.6.1.4.1.211.1.21.1.102.3.12.2 |
fjdaryHostiscsiEntry FjdaryHostiscsiEntry .1.3.6.1.4.1.211.1.21.1.102.3.12.2.1 |
fjdaryHostiscsiIndexThe value of this object uniquely identifies this fjdaryHostiscsi
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.1 |
fjdaryHostiscsiDefineThe value of this object indicates the host iscsi information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Valid Flag |Reserved |
+++++
0x04|Reserved |
+++++
0x08|Host Response Table No |TCP Port No |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.2 |
fjdaryHostiscsiNameThe value of this object shows iscsi name of a host.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.3 |
fjdaryHostiscsiAliasNameThe value of this object shows alias name of a host.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.4 |
fjdaryHostiscsiIpAddressThe value of this object shows ip address of a host.ro IpAddress .1.3.6.1.4.1.211.1.21.1.102.3.12.2.1.5 |
fjdaryHostResponse OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.3.13 |
fjdaryHostResponseCountThe number of host response informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.13.1 |
fjdaryHostResponseTable SEQUENCE OF FjdaryHostResponseEntry .1.3.6.1.4.1.211.1.21.1.102.3.13.2 |
fjdaryHostResponseEntry FjdaryHostResponseEntry .1.3.6.1.4.1.211.1.21.1.102.3.13.2.1 |
fjdaryHostResponseIndexThe value of this object uniquely identifies this fjdaryHostResponse
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.3.13.2.1.1 |
fjdaryHostResponseInfoTableThe value of this object indicates the host response information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|Table No |Valid Flag |Reserved |
+++++
0x04|Reserved |
: :
0x14| |
+++++
0x18|SCC Mode |Host Command|Sense Control |
| | Timeout | |
+++++
0x1c|Ope Mode |Ope Mode | Reserved |
| Flag0 | Flag1 | |
+++++
0x20|Status |Reserved |
| Control | |
+++++
0x24|Reserved |
: :
0x3c| |
+++++
0x40|Inquiry |Inquiry |Inquiry |Reserved |
| Byte0 Mode | VPD ID Type| StdData Ver| |
+++++
0x44|Reserved |
+++++
0x48|Entry |Entry |Entry |Entry |
| Sense Key | Sense Code | Sub Sense | Convert Bit|
| | | Code | |
+++++
0x4c|Report |Report |Report |Report |
| Sense Key | Sense Code | Sub Sense | Convert Bit|
| | | Code | |
+++++
: :
+++++
0x80|Entry |Entry |Entry |Entry |
| Sense Key | Sense Code | Sub Sense | Convert Bit|
| | | Code | |
+++++
0x84|Report |Report |Report |Report |
| Sense Key | Sense Code | Sub Sense | Convert Bit|
| | | Code | |
+++++
0x88|Reserved |
+ +
0x8c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.3.13.2.1.2 |
fjdaryFirm OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.4 |
fjdaryFirmTotalThe value of this object indicates the total firmware information.
VVLLSSSS
| | |
| | +-firmware suffix
| +-firmware level
+-firmware versionro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.4.1 |
fjdaryPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5 |
fjdaryPfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.1 |
fjdaryPfInfoVersionThis is the version for this performance information data.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.1.1 |
fjdaryPfInfoLevelThis is the level for this performance information data.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.1.2 |
fjdaryPfInfoIntervalTimeThis indicates the acquisition interval of the performance information
data. The unit is a second.
If this value is not applicable, return zero.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.1.3 |
fjdaryPfInfoUpdateTimeThis indicates the update time of the performance information data.
The unit is a second.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.1.4 |
fjdaryPfInfoDataValidThis shows whether the performance information data to be acquired
exists.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.5.1.5 |
fjdaryPfInfoIOoffloadingValidThis indicates whether the fjdaryPfCmRoeBusy1 is valid.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.5.1.6 |
fjdaryPfOlu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.2 |
fjdaryPfOluCountThe number of OLU's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.1 |
fjdaryPfOluTable SEQUENCE OF FjdaryPfOluEntry .1.3.6.1.4.1.211.1.21.1.102.5.2.2 |
fjdaryPfOluEntry FjdaryPfOluEntry .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1 |
fjdaryPfOluIndexThe value of this object uniquely identifies this fjdaryPfOlu entry.
This is the same as OLUN.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.1 |
fjdaryPfOluRdIOPSThis shows the READ IOPS related to host I/O processing.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.2 |
fjdaryPfOluWtIOPSThis shows the WRITE IOPS related to host I/O processing.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.3 |
fjdaryPfOluAdCpRdIOPSThis shows the READ IOPS related to advanced copy processing.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.4 |
fjdaryPfOluAdCpWtIOPSThis shows the WRITE IOPS related to advanced copy processing.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.5 |
fjdaryPfOluRdTpThis shows the READ Throughput related to host I/O processing.
The unit is MB/sec.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.6 |
fjdaryPfOluWtTpThis shows the WRITE Throughput related to host I/O processing.
The unit is MB/sec.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.7 |
fjdaryPfOluAdCpRdTpThis shows the READ Throughput related to advanced copy processing.
The unit is MB/sec.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.8 |
fjdaryPfOluAdCpWtTpThis shows the WRITE Throughput related to advanced copy processing.
The unit is MB/sec.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.9 |
fjdaryPfOluRdRspTimeThis indicates the average of READ Response Time related to host I/O
processing. The unit is msec.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.10 |
fjdaryPfOluWtRspTimeThis indicates the average of WRITE Response Time related to host I/O
processing. The unit is msec.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.11 |
fjdaryPfOluRdCacheHitThis shows the READ Cache Hit Rate related to host I/O processing.
The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.12 |
fjdaryPfOluWtCacheHitThis shows the WRITE Cache Hit Rate related to host I/O processing.
The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.13 |
fjdaryPfOluAdRdCacheHitThis shows the READ Cache Hit Rate related to advanced copy
processing. The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.14 |
fjdaryPfOluAdWtCacheHitThis shows the WRITE Cache Hit Rate related to advanced copy
processing. The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.15 |
fjdaryPfOluRdPreFetchHitThis shows the READ Prefetch Hit Rate related to host I/O processing.
The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.16 |
fjdaryPfOluAdRdPreFetchHitThis shows the READ Prefetch Hit Rate related to advanced copy
processing. The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.2.2.1.17 |
fjdaryPfDisk OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.3 |
fjdaryPfDiskCountThe number of DISK's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.3.1 |
fjdaryPfDiskTable SEQUENCE OF FjdaryPfDiskEntry .1.3.6.1.4.1.211.1.21.1.102.5.3.2 |
fjdaryPfDiskEntry FjdaryPfDiskEntry .1.3.6.1.4.1.211.1.21.1.102.5.3.2.1 |
fjdaryPfDiskIndexThe value of this object uniquely identifies this fjdaryPfDisk entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.3.2.1.1 |
fjdaryPfDiskPlunThis shows PLU number concerned DISK.
the following definition:
0xDDSS
| |
| +-slot number
+-DE IDro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.3.2.1.2 |
fjdaryPfDiskBusyThis shows DISK busy rate. The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.3.2.1.3 |
fjdaryPfCm OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.4 |
fjdaryPfCmCountThe number of CM's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.4.1 |
fjdaryPfCmTable SEQUENCE OF FjdaryPfCmEntry .1.3.6.1.4.1.211.1.21.1.102.5.4.2 |
fjdaryPfCmEntry FjdaryPfCmEntry .1.3.6.1.4.1.211.1.21.1.102.5.4.2.1 |
fjdaryPfCmIndexThe value of this object uniquely identifies this fjdaryPfCm entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.1 |
fjdaryPfCmBusyThis shows a busy rate of CPU. The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.2 |
fjdaryPfCmRoeBusyThis shows a busy rate of ROE. The unit is percent.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.3 |
fjdaryPfCmCpRemainThis shows the amount of the copy remainder. The unit is Byte.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.4 |
fjdaryPfCmRoeBusy1This shows a busy rate of ROE#1. The unit is percent. When
fjdaryPfInfoIOoffloadingValid is valid, this information is
effective.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.4.2.1.5 |
fjdaryPfCaPort OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.5 |
fjdaryPfCaPortCountThe number of CA port's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.5.1 |
fjdaryPfCaPortTable SEQUENCE OF FjdaryPfCaPortEntry .1.3.6.1.4.1.211.1.21.1.102.5.5.2 |
fjdaryPfCaPortEntry FjdaryPfCaPortEntry .1.3.6.1.4.1.211.1.21.1.102.5.5.2.1 |
fjdaryPfCaPortIndexThe value of this object uniquely identifies this fjdaryPfCaPort
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.1 |
fjdaryPfCaPortModeThis shows a mode concerned CA.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.2 |
fjdaryPfCaPortRdIOPSThis shows the READ IOPS for the CA,CARA mode.
The Initiator IOPS is shown for RA,Initiator mode.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.3 |
fjdaryPfCaPortWtIOPSThis shows the WRITE IOPS for the CA,CARA mode.
The Target IOPS is shown for the RA mode.
This information is an invalid value for the Initiator mode.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.4 |
fjdaryPfCaPortRdTpThis shows the amount of the READ Throughput for the CA,CARA mode.
The Initiator Throughput is shown for RA,Initiator mode.
The unit is MB/sec.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.5 |
fjdaryPfCaPortWtTpThis shows the amount of the WRITE Throughput for the CA,CARA mode.
The Target Throughput is shown for the RA mode.
The unit is MB/sec.
This information is an invalid value for the Initiator mode.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.5.2.1.6 |
fjdaryPfDtOlu OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.6 |
fjdaryPfDtOluCountThe number of OLU's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.6.1 |
fjdaryPfDtOluTable SEQUENCE OF FjdaryPfDtOluEntry .1.3.6.1.4.1.211.1.21.1.102.5.6.2 |
fjdaryPfDtOluEntry FjdaryPfDtOluEntry .1.3.6.1.4.1.211.1.21.1.102.5.6.2.1 |
fjdaryPfDtOluIndexThe value of this object uniquely identifies this fjdaryPfDtOlu
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.6.2.1.1 |
fjdaryPfDtOluInfoThe value of this object indicates the OLU performance information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|OLU info#index*2 (80 bytes) |
+++++
0x50|OLU info#index*2+1 (80 bytes) |
+++++
OLU info#
byte 0 byte 1 byte 2 byte 3
+++++
0x00|fjdaryPfOluRdIOPS |
+++++
0x04|fjdaryPfOluWtIOPS |
+++++
0x08|fjdaryPfOluAdCpRdIOPS |
+++++
0x0c|fjdaryPfOluAdCpWtIOPS |
+++++
0x10|fjdaryPfOluRdTp |
+++++
0x14|fjdaryPfOluWtTp |
+++++
0x18|fjdaryPfOluAdCpRdTp |
+++++
0x1c|fjdaryPfOluAdCpWtTp |
+++++
0x20|fjdaryPfOluRdRspTime |
+++++
0x24|fjdaryPfOluWtRspTime |
+++++
0x28|Reserved |
+ +
0x2c| |
+++++
0x30|fjdaryPfOluRdCacheHit |
+++++
0x34|fjdaryPfOluWtCacheHit |
+++++
0x38|fjdaryPfOluAdRdCacheHit |
+++++
0x3c|fjdaryPfOluAdWtCacheHit |
+++++
0x40|fjdaryPfOluRdPreFetchHit |
+++++
0x44|fjdaryPfOluAdRdPreFetchHit |
+++++
0x48|Reserved |
+ +
0x4c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.5.6.2.1.2 |
fjdaryPfDtDisk OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.7 |
fjdaryPfDtDiskCountThe number of DISK's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.7.1 |
fjdaryPfDtDiskTable SEQUENCE OF FjdaryPfDtDiskEntry .1.3.6.1.4.1.211.1.21.1.102.5.7.2 |
fjdaryPfDtDiskEntry FjdaryPfDtDiskEntry .1.3.6.1.4.1.211.1.21.1.102.5.7.2.1 |
fjdaryPfDtDiskIndexThe value of this object uniquely identifies this fjdaryPfDtDisk
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.7.2.1.1 |
fjdaryPfDtDiskInfoThe value of this object indicates the DISK performance information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|DISK info#index*48 (4 bytes) |
+++++
0x04|DISK info#index*48+1 (4 bytes) |
+++++
: :
+++++
0xbc|DISK info#index*48+47 (4 bytes) |
+++++
DISK info#
byte 0 byte 1 byte 2 byte 3
+++++
0x00|fjdaryPfDiskBusy |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.5.7.2.1.2 |
fjdaryPfDtCm OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.8 |
fjdaryPfDtCmCountThe number of CM's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.8.1 |
fjdaryPfDtCmTable SEQUENCE OF FjdaryPfDtCmEntry .1.3.6.1.4.1.211.1.21.1.102.5.8.2 |
fjdaryPfDtCmEntry FjdaryPfDtCmEntry .1.3.6.1.4.1.211.1.21.1.102.5.8.2.1 |
fjdaryPfDtCmIndexThe value of this object uniquely identifies this fjdaryPfDtCm entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.8.2.1.1 |
fjdaryPfDtCmInfoThe value of this object indicates the CM performance information.
This information is a little endian.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|CM info#index*N (16 bytes) |
+++++
0x10|CM info#index*N+1 (16 bytes) |
+++++
: :
+++++
0xXX|CM info#index*N+(N-1) (16 bytes) |
+++++
N: Total of CPU of this system. (regardless of their current state)
CM info#
byte 0 byte 1 byte 2 byte 3
+++++
0x00|fjdaryPfCmBusy |
+++++
0x04|fjdaryPfCmRoeBusy |
+++++
0x08|fjdaryPfCmCpRemain |
+ +
0x0c| |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.5.8.2.1.2 |
fjdaryPfDtCaPort OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.9 |
fjdaryPfDtCaPortCountThe number of CA port's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.9.1 |
fjdaryPfDtCaPortTable SEQUENCE OF FjdaryPfDtCaPortEntry .1.3.6.1.4.1.211.1.21.1.102.5.9.2 |
fjdaryPfDtCaPortEntry FjdaryPfDtCaPortEntry .1.3.6.1.4.1.211.1.21.1.102.5.9.2.1 |
fjdaryPfDtCaPortIndexThe value of this object uniquely identifies this fjdaryPfDtCaPort
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.9.2.1.1 |
fjdaryPfDtCaPortInfoThe value of this object indicates the CA port performance
information.
This information is a little endian.
This information is an invalid value for the RA,Initiator mode.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|CA port info#index*16 (16 bytes) |
+++++
0x10|CA port info#index*16+1 (16 bytes) |
+++++
: :
+++++
0xf0|CA port info#index*16+15 (16 bytes) |
+++++
CA port info#
byte 0 byte 1 byte 2 byte 3
+++++
0x00|fjdaryPfCaPortRdIOPS |
+++++
0x04|fjdaryPfCaPortWtIOPS |
+++++
0x08|fjdaryPfCaPortRdTp |
+++++
0x0c|fjdaryPfCaPortWtTp |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.5.9.2.1.2 |
fjdaryPfRaPort OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.10 |
fjdaryPfRaPortCountThe number of CA port's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.10.1 |
fjdaryPfRaPortTable SEQUENCE OF FjdaryPfRaPortEntry .1.3.6.1.4.1.211.1.21.1.102.5.10.2 |
fjdaryPfRaPortEntry FjdaryPfRaPortEntry .1.3.6.1.4.1.211.1.21.1.102.5.10.2.1 |
fjdaryPfRaPortIndexThe value of this object uniquely identifies this fjdaryPfRaPort
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.1 |
fjdaryPfRaPortModeThis shows a mode concerned CA.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.2 |
fjdaryPfRaPortRdIOPSThe Initiator IOPS is shown for RA,Initiator,CARA mode.
This information is an invalid value for the CA mode.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.3 |
fjdaryPfRaPortWtIOPSThe Target IOPS is shown for the RA,CARA mode.
This information is an invalid value for the Initiator,CA mode.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.4 |
fjdaryPfRaPortRdTpThe Initiator Throughput is shown for RA,Initiator,CARA mode.
The unit is MB/sec.
This information is an invalid value for the CA mode.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.5 |
fjdaryPfRaPortWtTpThe Target Throughput is shown for the RA,CARA mode.
The unit is MB/sec.
This information is an invalid value for the Initiator,CA mode.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.10.2.1.6 |
fjdaryPfDtRaPort OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.5.11 |
fjdaryPfDtRaPortCountThe number of CA port's performance informations
(regardless of their current state) present on this system.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.11.1 |
fjdaryPfDtRaPortTable SEQUENCE OF FjdaryPfDtRaPortEntry .1.3.6.1.4.1.211.1.21.1.102.5.11.2 |
fjdaryPfDtRaPortEntry FjdaryPfDtRaPortEntry .1.3.6.1.4.1.211.1.21.1.102.5.11.2.1 |
fjdaryPfDtRaPortIndexThe value of this object uniquely identifies this fjdaryPfDtRaPort
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.5.11.2.1.1 |
fjdaryPfDtRaPortInfoThe value of this object indicates the CA port performance
information.
This information is a little endian.
This information is an invalid value for the CA mode.
byte 0 byte 1 byte 2 byte 3
+++++
0x00|CA port info#index*16 (16 bytes) |
+++++
0x10|CA port info#index*16+1 (16 bytes) |
+++++
: :
+++++
0xf0|CA port info#index*16+15 (16 bytes) |
+++++
CA port info#
byte 0 byte 1 byte 2 byte 3
+++++
0x00|fjdaryPfRaPortRdIOPS |
+++++
0x04|fjdaryPfRaPortWtIOPS |
+++++
0x08|fjdaryPfRaPortRdTp |
+++++
0x0c|fjdaryPfRaPortWtTp |
+++++ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.5.11.2.1.2 |
fjdaryUnitStatusOverall status of this system. Status becomes warning or failed
when there are broken parts in the system.
But, it doesn't become warning or failed when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.6 |
fjdaryTrapItemIdThis object is used to store the identification number of parts for
which maintenance is necessary when trap is transmitted.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.7 |
fjdaryTrapSensorInfoThis object is used to store detail information of sensor when trap is
transmitted.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.8 |
fjdaryTrapMaintenanceInfoThis object is used to store detail information of maintenance when
trap is transmitted.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.9 |
fjdaryTrapWarningInfoThis object is used to store detail information of warning when trap
is transmitted.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.10 |
fjdaryTrapMessageThis object is used to store detail messages when all trap is
transmitted.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.21.1.102.11 |
fjdaryMIBversionThis is the version for this MIB.
This defines a revision of v5.0ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.211.1.21.1.102.12 |
fjdarySensor OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.13 |
fjdaryMachinePower OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.13.1 |
fjdaryMachinePowerCountThe number of power consumption information table's entry on this
machine.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.1 |
fjdaryMachinePowerTable SEQUENCE OF FjdaryMachinePowerEntry .1.3.6.1.4.1.211.1.21.1.102.13.1.2 |
fjdaryMachinePowerEntry FjdaryMachinePowerEntry .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1 |
fjdaryMachinePowerIndexThe value of this object uniquely identifies this fjdaryMachinePower
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.1 |
fjdaryMachinePowerFlagThe state of information concerned index is shown.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.2 |
fjdaryMachinePowerCmNumCM number in which this information is gathered.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.3 |
fjdaryMachinePowerTimePassage second when this information was gathered.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.4 |
fjdaryMachinePowerInfo0The average power consumption is shown during one hour in the past.
The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.5 |
fjdaryMachinePowerInfo1The average power consumption 1 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.6 |
fjdaryMachinePowerInfo2The average power consumption 2 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.7 |
fjdaryMachinePowerInfo3The average power consumption 3 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.8 |
fjdaryMachinePowerInfo4The average power consumption 4 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.9 |
fjdaryMachinePowerInfo5The average power consumption 5 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.10 |
fjdaryMachinePowerInfo6The average power consumption 6 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.11 |
fjdaryMachinePowerInfo7The average power consumption 7 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.12 |
fjdaryMachinePowerInfo8The average power consumption 8 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.13 |
fjdaryMachinePowerInfo9The average power consumption 9 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.14 |
fjdaryMachinePowerInfo10The average power consumption 10 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.15 |
fjdaryMachinePowerInfo11The average power consumption 11 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.16 |
fjdaryMachinePowerInfo12The average power consumption 12 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.17 |
fjdaryMachinePowerInfo13The average power consumption 13 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.18 |
fjdaryMachinePowerInfo14The average power consumption 14 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.19 |
fjdaryMachinePowerInfo15The average power consumption 15 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.20 |
fjdaryMachinePowerInfo16The average power consumption 16 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.21 |
fjdaryMachinePowerInfo17The average power consumption 17 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.22 |
fjdaryMachinePowerInfo18The average power consumption 18 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.23 |
fjdaryMachinePowerInfo19The average power consumption 19 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.24 |
fjdaryMachinePowerInfo20The average power consumption 20 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.25 |
fjdaryMachinePowerInfo21The average power consumption 21 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.26 |
fjdaryMachinePowerInfo22The average power consumption 22 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.27 |
fjdaryMachinePowerInfo23The average power consumption 23 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.28 |
fjdaryMachinePowerInfo24The average power consumption 24 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.1.2.1.29 |
fjdaryEncPower OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.13.2 |
fjdaryEncPowerCountThe number of power consumption information table's entry of each
enclosure.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.1 |
fjdaryEncPowerTable SEQUENCE OF FjdaryEncPowerEntry .1.3.6.1.4.1.211.1.21.1.102.13.2.2 |
fjdaryEncPowerEntry FjdaryEncPowerEntry .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1 |
fjdaryEncPowerIndexThe value of this object uniquely identifies this fjdaryEncPower
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.1 |
fjdaryEncPowerFlagThe state of information concerned index is shown.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.2 |
fjdaryEncPowerCmNumCM number in which this information is gathered.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.3 |
fjdaryEncPowerDeIdDE ID in which this information is gathered.
When fjdaryEncPowerType is de, this information is effective.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.4 |
fjdaryEncPowerTimePassage second when this information was gathered.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.5 |
fjdaryEncPowerTypeenclosure type in which this information is gathered.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.6 |
fjdaryEncPowerInfo0The average power consumption is shown during one hour in the past.
The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.7 |
fjdaryEncPowerInfo1The average power consumption 1 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.8 |
fjdaryEncPowerInfo2The average power consumption 2 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.9 |
fjdaryEncPowerInfo3The average power consumption 3 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.10 |
fjdaryEncPowerInfo4The average power consumption 4 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.11 |
fjdaryEncPowerInfo5The average power consumption 5 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.12 |
fjdaryEncPowerInfo6The average power consumption 6 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.13 |
fjdaryEncPowerInfo7The average power consumption 7 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.14 |
fjdaryEncPowerInfo8The average power consumption 8 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.15 |
fjdaryEncPowerInfo9The average power consumption 9 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.16 |
fjdaryEncPowerInfo10The average power consumption 10 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.17 |
fjdaryEncPowerInfo11The average power consumption 11 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.18 |
fjdaryEncPowerInfo12The average power consumption 12 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.19 |
fjdaryEncPowerInfo13The average power consumption 13 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.20 |
fjdaryEncPowerInfo14The average power consumption 14 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.21 |
fjdaryEncPowerInfo15The average power consumption 15 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.22 |
fjdaryEncPowerInfo16The average power consumption 16 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.23 |
fjdaryEncPowerInfo17The average power consumption 17 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.24 |
fjdaryEncPowerInfo18The average power consumption 18 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.25 |
fjdaryEncPowerInfo19The average power consumption 19 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.26 |
fjdaryEncPowerInfo20The average power consumption 20 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.27 |
fjdaryEncPowerInfo21The average power consumption 21 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.28 |
fjdaryEncPowerInfo22The average power consumption 22 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.29 |
fjdaryEncPowerInfo23The average power consumption 23 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.30 |
fjdaryEncPowerInfo24The average power consumption 24 hour ago is shown. The unit is Watt.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.2.2.1.31 |
fjdaryMachineTemp OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.13.3 |
fjdaryMachineTempCountThe number of temperature information table's entry on this machine.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.1 |
fjdaryMachineTempTable SEQUENCE OF FjdaryMachineTempEntry .1.3.6.1.4.1.211.1.21.1.102.13.3.2 |
fjdaryMachineTempEntry FjdaryMachineTempEntry .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1 |
fjdaryMachineTempIndexThe value of this object uniquely identifies this fjdaryMachineTemp
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.1 |
fjdaryMachineTempFlagThe state of information concerned index is shown.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.2 |
fjdaryMachineTempCmNumCM number in which this information is gathered.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.3 |
fjdaryMachineTempTimePassage second when this information was gathered.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.4 |
fjdaryMachineTempInfo0The maximum temperature is shown during one hour in the past.
The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.5 |
fjdaryMachineTempInfo1The maximum temperature 1 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.6 |
fjdaryMachineTempInfo2The maximum temperature 2 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.7 |
fjdaryMachineTempInfo3The maximum temperature 3 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.8 |
fjdaryMachineTempInfo4The maximum temperature 4 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.9 |
fjdaryMachineTempInfo5The maximum temperature 5 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.10 |
fjdaryMachineTempInfo6The maximum temperature 6 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.11 |
fjdaryMachineTempInfo7The maximum temperature 7 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.12 |
fjdaryMachineTempInfo8The maximum temperature 8 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.13 |
fjdaryMachineTempInfo9The maximum temperature 9 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.14 |
fjdaryMachineTempInfo10The maximum temperature 10 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.15 |
fjdaryMachineTempInfo11The maximum temperature 11 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.16 |
fjdaryMachineTempInfo12The maximum temperature 12 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.17 |
fjdaryMachineTempInfo13The maximum temperature 13 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.18 |
fjdaryMachineTempInfo14The maximum temperature 14 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.19 |
fjdaryMachineTempInfo15The maximum temperature 15 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.20 |
fjdaryMachineTempInfo16The maximum temperature 16 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.21 |
fjdaryMachineTempInfo17The maximum temperature 17 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.22 |
fjdaryMachineTempInfo18The maximum temperature 18 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.23 |
fjdaryMachineTempInfo19The maximum temperature 19 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.24 |
fjdaryMachineTempInfo20The maximum temperature 20 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.25 |
fjdaryMachineTempInfo21The maximum temperature 21 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.26 |
fjdaryMachineTempInfo22The maximum temperature 22 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.27 |
fjdaryMachineTempInfo23The maximum temperature 23 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.28 |
fjdaryMachineTempInfo24The maximum temperature 24 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.3.2.1.29 |
fjdaryEncTemp OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.13.4 |
fjdaryEncTempCountThe number of temperature information table's entry of each
enclosure.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.1 |
fjdaryEncTempTable SEQUENCE OF FjdaryEncTempEntry .1.3.6.1.4.1.211.1.21.1.102.13.4.2 |
fjdaryEncTempEntry FjdaryEncTempEntry .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1 |
fjdaryEncTempIndexThe value of this object uniquely identifies this fjdaryEncTemp
entry.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.1 |
fjdaryEncTempFlagThe state of information concerned index is shown.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.2 |
fjdaryEncTempCmNumCM number in which this information is gathered.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.3 |
fjdaryEncTempDeIdDE ID in which this information is gathered.
When fjdaryEncTempType is de, this information is effectivero INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.4 |
fjdaryEncTempTimePassage second when this information was gathered.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.5 |
fjdaryEncTempTypeenclosure type in which this information is gathered.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.6 |
fjdaryEncTempInfo0The maximum temperature is shown during one hour in the past.
The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.7 |
fjdaryEncTempInfo1The maximum temperature 1 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.8 |
fjdaryEncTempInfo2The maximum temperature 2 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.9 |
fjdaryEncTempInfo3The maximum temperature 3 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.10 |
fjdaryEncTempInfo4The maximum temperature 4 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.11 |
fjdaryEncTempInfo5The maximum temperature 5 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.12 |
fjdaryEncTempInfo6The maximum temperature 6 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.13 |
fjdaryEncTempInfo7The maximum temperature 7 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.14 |
fjdaryEncTempInfo8The maximum temperature 8 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.15 |
fjdaryEncTempInfo9The maximum temperature 9 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.16 |
fjdaryEncTempInfo10The maximum temperature 10 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.17 |
fjdaryEncTempInfo11The maximum temperature 11 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.18 |
fjdaryEncTempInfo12The maximum temperature 12 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.19 |
fjdaryEncTempInfo13The maximum temperature 13 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.20 |
fjdaryEncTempInfo14The maximum temperature 14 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.21 |
fjdaryEncTempInfo15The maximum temperature 15 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.22 |
fjdaryEncTempInfo16The maximum temperature 16 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.23 |
fjdaryEncTempInfo17The maximum temperature 17 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.24 |
fjdaryEncTempInfo18The maximum temperature 18 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.25 |
fjdaryEncTempInfo19The maximum temperature 19 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.26 |
fjdaryEncTempInfo20The maximum temperature 20 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.27 |
fjdaryEncTempInfo21The maximum temperature 21 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.28 |
fjdaryEncTempInfo22The maximum temperature 22 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.29 |
fjdaryEncTempInfo23The maximum temperature 23 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.30 |
fjdaryEncTempInfo24The maximum temperature 24 hour ago is shown. The unit is Celsius.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.13.4.2.1.31 |
fjdaryManagement OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.14 |
fjdaryMgtMachineInfo OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.14.1 |
fjdaryMgtMachineStatusOverall status of this system. Status becomes warning or failed
when there are broken parts in the system.
But, it doesn't become warning or failed when maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)
This is the same as fjdaryUnitStatus.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.14.1.1 |
fjdaryMgtMachineSubStatusOverall status of this system. Status becomes warning or failed
when there are broken parts in the system.
It becomes warning and failed while even maintaining it.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.14.1.2 |
fjdaryMgtMaintenanceModeThis shows the state of the mode while maintaining the system.
(In the maintenance work, fjdaryMgtMaintenanceMode is on)ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.14.1.3 |
fjdaryMgtConfigInfoThis shows the management data of the configuration information of
machine. This data is the one only for a certain specific software.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.14.1.4 |
fjdaryMgtConfigSubInfoThis is a detail of fjdaryMgtConfigInfo.
This data is the one only for a certain specific software.ro OCTET STRING .1.3.6.1.4.1.211.1.21.1.102.14.1.5 |
fjdaryMgtOpVolume OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.14.2 |
fjdaryMgtOpVolumeTable SEQUENCE OF FjdaryMgtOpVolumeEntry .1.3.6.1.4.1.211.1.21.1.102.14.2.2 |
fjdaryMgtOpVolumeEntry FjdaryMgtOpVolumeEntry .1.3.6.1.4.1.211.1.21.1.102.14.2.2.1 |
fjdaryMgtOpVolumeNumberThis shows the open volume number.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.1 |
fjdaryMgtOpVolumeStatusThis shows the status of open volume.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.2 |
fjdaryMgtOpVolumeTypeThis shows the type of open volume.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.3 |
fjdaryMgtOpVolumeCapacityThis shows the open volume capacity. The unit is MB.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.4 |
fjdaryMgtOpVolumeType2This shows the type of open volume. This is more detailed than
fjdaryMgtOpVolumeType.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.5 |
fjdaryMgtOpVolumeAttributeThis shows the attribute of open volume.
The value is a bit mask.
The bits have the following definition:
Dynamic LUN Mirroring(DLM) - 4
Offloaded Data Transfer(ODX) - 8ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.14.2.2.1.6 |
fjdaryMgtRaidGrp OBJECT IDENTIFIER .1.3.6.1.4.1.211.1.21.1.102.14.3 |
fjdaryMgtRaidGrpTable SEQUENCE OF FjdaryMgtRaidGrpEntry .1.3.6.1.4.1.211.1.21.1.102.14.3.2 |
fjdaryMgtRaidGrpEntry FjdaryMgtRaidGrpEntry .1.3.6.1.4.1.211.1.21.1.102.14.3.2.1 |
fjdaryMgtRaidGrpNumberThis shows the raid group number.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.14.3.2.1.1 |
fjdaryMgtRaidGrpStatusThis shows the status of raid groupro Enumeration .1.3.6.1.4.1.211.1.21.1.102.14.3.2.1.2 |
fjdaryMgtRaidGrpRaidLevelThis shows the RAID level.
the following definition:
RAID0 - raid0
RAID1 - raid1
RAID1+0 - raid10
RAID5 - raid5
RAID5+0 - raid50
RAID6 - raid6ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.14.3.2.1.3 |
fjdaryMgtRaidGrpCapacityThis shows the raid group capacity. The unit is MB.ro INTEGER .1.3.6.1.4.1.211.1.21.1.102.14.3.2.1.4 |
fjdaryTrapLinkStatusInfoThis object is used to store detail information of CA port link
status when trap is transmitted.ro Enumeration .1.3.6.1.4.1.211.1.21.1.102.15 |
application OBJECT IDENTIFIER .1.3.6.1.4.1.211.4 |
aplNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.211.4.1 |
aplNetDevice OBJECT IDENTIFIER .1.3.6.1.4.1.211.4.1.1 |
aplNetStorage OBJECT IDENTIFIER .1.3.6.1.4.1.211.4.1.1.126 |
aplNetNsp OBJECT IDENTIFIER .1.3.6.1.4.1.211.4.1.1.126.1 |
aplNetFjdarye102 OBJECT IDENTIFIER .1.3.6.1.4.1.211.4.1.1.126.1.102 |
fjdarye102ConfigChangeA configChange trap signifies that the sending protocol entity
recognizes the change in configuration information. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.0 |
fjdarye102FirmChangeA firmChange trap signifies that the exchange of the firmware was
executed. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.1 |
fjdarye102ItemFaultA itemFault trap signifies that device was failed. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.2 |
fjdarye102BatteryExpirationA batteryExpiration trap signifies that the exchange time of the
battery comes. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.3 |
fjdarye102RebuildNotStartA rebuildNotStart trap signifies that not to be able to begin to
execute the rebuild because there is no spare disk. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.4 |
fjdarye102ItemWarningA itemWarning trap signifies that device was warning. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.5 |
fjdarye102SensorStatusChangeA sensorStatusChange trap signifies that environment sensor status
changes. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.6 |
fjdarye102MaintenanceRequiredA maintenanceRequired trap signifies that maintenance information. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.7 |
fjdarye102InformationA Information trap signifies that information events. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.9 |
fjdarye102CaPortLinkStatusChangeA caPortLinkStatusChange trap signifies that CA port link status changes. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.10 |
fjdarye102ItemFaultToNormalA itemFaultToNormal trap signifies that the device state has changed
to normal after sending itemFault trap. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.22 |
fjdarye102ItemWarningToNormalA itemWarningToNormal trap signifies that the device state has changed
to normal after sending itemWarning trap. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.25 |
fjdarye102SensorStatusChangeToNormalA sensorStatusChangeToNormal trap signifies that the error or warning
state detected by the environment sensor has returned to normal after
sending SensorStatusChange trap. TRAP-TYPE .1.3.6.1.4.1.211.4.1.1.126.1.102.0.26 |