FOUNDRY-SN-MAC-VLAN-MIB
AI MIB Summary
The FOUNDRY-SN-MAC-VLAN-MIB enables monitoring and configuration of MAC-based VLAN assignments and associated traffic statistics on Foundry Networks (now Brocade) Layer 2 switches. It provides access to specific metrics including MAC address-to-VLAN binding tables, port membership status, and packet/byte counters for VLANs dynamically assigned based on source MAC addresses.
Management Information Base module for MAC-based Vlan configuration and statistics.
Main OID:
snMacVlan.1.3.6.1.4.1.1991.1.1.3.30
23
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
snMacVlanManagement Information Base module for MAC-based Vlan configuration and statistics. MODULE-IDENTITY .1.3.6.1.4.1.1991.1.1.3.30 |
snMacVlanGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.1.3.30.1 |
snMacVlanGlobalClearOpervalid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear operational MAC-based Vlan entry for all ports.rw Enumeration .1.3.6.1.4.1.1991.1.1.3.30.1.1 |
snMacVlanGlobalDynConfigStateEnable/disable MAC-based VLAN dynamic activation on the global level.rw Enumeration .1.3.6.1.4.1.1991.1.1.3.30.1.2 |
snMacVlanTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.1.3.30.2 |
snMacVlanPortMemberTableMAC-based Vlan port membership table. SEQUENCE OF SnMacVlanPortMemberEntry .1.3.6.1.4.1.1991.1.1.3.30.2.1 |
snMacVlanPortMemberEntryAn entry of the MAC-based Vlan port membership table. SnMacVlanPortMemberEntry .1.3.6.1.4.1.1991.1.1.3.30.2.1.1 |
snMacVlanPortMemberVLanIdThe VLAN identifier (VLAN ID). INTEGER .1.3.6.1.4.1.1991.1.1.3.30.2.1.1.1 |
snMacVlanPortMemberPortIdThe ifIndex which is a member of the MAC-based VLAN. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1991.1.1.3.30.2.1.1.2 |
snMacVlanPortMemberRowStatusThis object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.1991.1.1.3.30.2.1.1.3 |
snMacVlanIfTableMAC-based Vlan Interface table. SEQUENCE OF SnMacVlanIfEntry .1.3.6.1.4.1.1991.1.1.3.30.2.2 |
snMacVlanIfEntryAn entry in the MAC-based Vlan interface table. SnMacVlanIfEntry .1.3.6.1.4.1.1991.1.1.3.30.2.2.1 |
snMacVlanIfIndexThe ifIndex which is a member of the MAC-based VLAN. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1991.1.1.3.30.2.2.1.1 |
snMacVlanIfEnableThe administrative status requested by management for MAC-based Vlan on this interface. The value enabled(1) indicates that MAC-based Vlan should be enabled on this interface, When disabled(2), MAC-based Vlan is disabled on this interface. Enable/disable MAC-based Vlan on this interface.rw Enumeration .1.3.6.1.4.1.1991.1.1.3.30.2.2.1.2 |
snMacVlanIfMaxEntryThe maximum number of allowed and denied MAC address (static and dynamic) that can be leared on an interface. The default value is 2. The value should be between 2 to 32.rw Integer32 .1.3.6.1.4.1.1991.1.1.3.30.2.2.1.3 |
snMacVlanIfClearOpervalid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing operational MAC-based Vlan entry for a port.rw Enumeration .1.3.6.1.4.1.1991.1.1.3.30.2.2.1.4 |
snMacVlanIfClearConfigvalid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing configured MAC-based Vlan entry for a port.rw Enumeration .1.3.6.1.4.1.1991.1.1.3.30.2.2.1.5 |
snMacBasedVlanTableMAC-based Vlan table. SEQUENCE OF SnMacBasedVlanEntry .1.3.6.1.4.1.1991.1.1.3.30.2.3 |
snMacBasedVlanEntryAn entry in the MAC-based Vlan table. SnMacBasedVlanEntry .1.3.6.1.4.1.1991.1.1.3.30.2.3.1 |
snMacBasedVlanIdThe ID of a VLAN of which this port is a mac-vlan-permit member. Port must be untagged. This object return 0 which is an invalid VLAN ID value. INTEGER .1.3.6.1.4.1.1991.1.1.3.30.2.3.1.1 |
snMacBasedVlanMacA host source MAC address to be authenticated. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1991.1.1.3.30.2.3.1.2 |
snMacBasedVlanPriorityThe priority of the source MAC address.rw Integer32 .1.3.6.1.4.1.1991.1.1.3.30.2.3.1.3 |
snMacBasedVlanRowStatusThis object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.1991.1.1.3.30.2.3.1.4 |