FOUNDRY-MPLS-MIB
This is Brocade's proprietary MIB module for Multi-Protocol Label Switched Paths.
Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
mpls.1.3.6.1.4.1.1991.1.2.15.1
62
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
snMplsLspUpAn mplsLspUp trap signifies that the
specified LSP is up. The current active
path for the LSP is mplsLspPathName. NOTIFICATION-TYPE .1.3.6.1.4.1.1991.0.1010 |
snMplsLspDownAn mplsLspDown trap signifies that the
specified LSP is down, because the current
active path mplsLspPathName went down. NOTIFICATION-TYPE .1.3.6.1.4.1.1991.0.1011 |
snMplsLspChangeAn mplsLspChange trap signifies that the
the specified LSP has switched traffic to
the new active path 'toLspPath'. The LSP maintains
up state before and after the switch over NOTIFICATION-TYPE .1.3.6.1.4.1.1991.0.1012 |
mplsThis is Brocade's proprietary MIB module for Multi-Protocol Label Switched Paths.
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.1991.1.2.15.1 |
mplsLspNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.1.0 |
mplsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.1.1 |
mplsVersionMPLS version number.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.1.1 |
brcdMplsAdminGroupTableList of administrative groups (by ID) that have a configured group name. SEQUENCE OF BrcdMplsAdminGroupEntry .1.3.6.1.4.1.1991.1.2.15.1.1.2 |
brcdMplsAdminGroupEntryInformation about an administrative group entry. BrcdMplsAdminGroupEntry .1.3.6.1.4.1.1991.1.2.15.1.1.2.1 |
brcdMplsAdminGroupIdIdentifies the administrative group ID in 1-based.
The end user of this object must convert this to 0-based since this
maps to the bit position in the constraint-based link selection. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.1.2.1.1 |
brcdMplsAdminGroupNameThe group name that this administrative group is associated with.rw DisplayString .1.3.6.1.4.1.1991.1.2.15.1.1.2.1.2 |
brcdMplsAdminGroupRowStatusThe row status of an entry.
Note: Set request to this table is not supported in this release.
Always returns 'active' for the existing entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.1.2.1.3 |
brcdMplsInterfaceTableList of MPLS-enabled Interfaces. SEQUENCE OF BrcdMplsInterfaceEntry .1.3.6.1.4.1.1991.1.2.15.1.1.3 |
brcdMplsInterfaceEntryInformation about an MPLS interface entry. BrcdMplsInterfaceEntry .1.3.6.1.4.1.1991.1.2.15.1.1.3.1 |
brcdMplsInterfaceIndexThe ifIndex of the MPLS-enabled port or VE interface. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.1.3.1.1 |
brcdMplsInterfaceAdminGroupSpecifies which administrative groups this MPLS-enabled
interface belongs to.rw MplsTunnelAffinity (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1991.1.2.15.1.1.3.1.2 |
brcdMplsInterfaceRowStatusThe row status of an entry.
Note: Set request to this table is not supported in this release.
Always returns 'active' for the existing entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.1.3.1.3 |
mplsLspInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.1.2 |
mplsConfiguredLspsNumber of configured LSPs. Sum of RSVP and static configured LSPs.
DEPRECATED BY mplsTunnelConfigured IN rfc3812-MPLS-TE-STD-MIB.rodeprecated Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.2.1 |
mplsActiveLspsNumber of active LSPs. Sum of RSVP, LDP and static LSPs.
DEPRECATED BY mplsTunnelActive IN rfc3812-MPLS-TE-STD-MIB.rodeprecated Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.2.2 |
mplsLspTableList of Configured Label Switched Paths. SEQUENCE OF MplsLspEntry .1.3.6.1.4.1.1991.1.2.15.1.2.3 |
mplsLspEntryEntry containing information about a particular
Label Switched Path. MplsLspEntry .1.3.6.1.4.1.1991.1.2.15.1.2.3.1 |
mplsLspSignalingProtoMPLS signaling protocol used by this LSP. Enumeration .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.1 |
mplsLspIndexThe unique index of the LSP in the system for a given signaling protocol. Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.2 |
mplsLspNameName of the Label Switched Path.ro DisplayString .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.3 |
mplsLspStateThe operational state of the LSP.ro Enumeration .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.4 |
mplsLspPacketsThe number of egress Layer-3 VPN and IPoMPLS packets
meeting the in-label and tunnel criteria.ro Counter64 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.5 |
mplsLspAgeThe age, since creation of this LSP in 10-millisecond periods.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.6 |
mplsLspTimeUpThe total time in 10-millisecond units that this
LSP has been operational. The percentage up time
can be determined by computing
(mplsLspTimeUp/mplsLspAge * 100 %).ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.7 |
mplsLspPrimaryTimeUpThe total time in 10-millisecond units that this
LSP's primary path has been operational. The
percentage contribution of the primary
path to the operational time is given by
(mplsLspPrimaryTimeUp/mplsLspTimeUp * 100) %.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.8 |
mplsLspTransitionsThe number of state transitions (up -> down and
down -> up) this LSP has undergone.ro Counter32 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.9 |
mplsLspLastTransitionThe time in 10-millisecond units since the last
transition occurred on this LSP.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.10 |
mplsLspFromSource IP address of this LSP.ro IpAddress .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.11 |
mplsLspToDestination IP address of this LSP.ro IpAddress .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.12 |
mplsLspPathNameThe name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in mplsLspEntry are meaningless.ro DisplayString .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.13 |
mplsLspPathTypeThe type of path that is active, i.e., a
primary path, a standby path, or a generic
secondary path. This field is meaningless
unless mplsLspPathName is not emptyro Enumeration .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.14 |
mplsLspAdaptiveIndicates if the LSP supports adaptive mechanism or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.15 |
mplsLspBfdSessionIdThe BFD session ID associated to this LSP. Zero indicates
there is no BFD session for this LSP. Non-zero value is an
index to an entry in the bfdSessTablero Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.16 |
mplsLspReoptimizeTimerThe number of seconds from the beginning of one reoptimization
attempt to the beginning of the next attempt.ro Unsigned32 ( 0 | 300..65535 ) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.17 |
mplsLspCoSThe Class of Service for this LSP.ro ClassOfService (FDRY-MPLS-L2VPN-MIB) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.18 |
mplsLspHopLimitThe number of hops this LSP can traverse.ro Unsigned32 ( 0..255 ) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.19 |
mplsLspCspfIndicates if CSPF path calculation is enabled
on this LSP.ro Enumeration .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.20 |
mplsLspCspfTieBreakerThe tie-breaker to use for selecting CSPF
equal-cost paths. The value of this variable is
meaningless if the mplsLspCspf is 'disabled'.ro Enumeration .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.21 |
mplsLspFrrModeIndicates which protection method is to be used
for Fast Reroute. 'detour' means one-to-one backup
and 'facility' for facility backup.ro Enumeration .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.22 |
mplsLspFrrSetupPriorityThe setup priority for MPLS Fast Reroute.
The value of this variable is meaningless if the
mplsLspFrrMode is 'none'.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.23 |
mplsLspFrrHoldingPriorityThe hold priority for MPLS Fast Reroute.
The value of this variable is meaningless if the
mplsLspFrrMode is 'none'.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.24 |
mplsLspFrrHopLimitThe hop limit for MPLS Fast Reroute.
The value of this variable is meaningless if the
mplsLspFrrMode is 'none'.ro Unsigned32 ( 0..255 ) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.25 |
mplsLspFrrBandwidthThe bandwidth constraint for MPLS Fast Reroute.
The value 0 means that the detour route uses a
best-effort value for bandwidth.
The value of this variable is meaningless if the
mplsLspFrrMode is 'none'.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.26 |
mplsLspFrrAdmGrpIncludeAnyThe administrative group setting that the device
includes any of the interfaces that are members of
the group when calculating detour routes for this LSP.
The value of this variable is meaningless if the
mplsLspFrrMode is 'none'.ro MplsTunnelAffinity (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.27 |
mplsLspFrrAdmGrpIncludeAllThe administrative group setting that an interface
must be a member of to be considered in a detour
route for the LSP. Any interface that is not a member
of all the groups is eliminated from consideration.
The value of this variable is meaningless if the
mplsLspFrrMode is 'none'.ro MplsTunnelAffinity (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.28 |
mplsLspFrrAdmGrpExcludeAnyThe administrative group setting that the device
excludes any of the interfaces that are members of
the group when calculating detour routes for this LSP.
The value of this variable is meaningless if the
mplsLspFrrMode is 'none'.ro MplsTunnelAffinity (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.29 |
mplsLspPathSelectModeIndicates the path selection mode to use.
Auto-select is the default mode. I this mode, the
primary path is always selected to carry traffic when
the primary path has stayed operating in the working
state for at least the amount of time specified in
mplsLspPathSelectRevertTimer.
For manual-select, traffic is switched to a user-
selected path specified in mplsLspPathSelectPathname
after the selected path has stayed operating in the
working state for at least the amount of time specified
in mplsLspPathSelectRevertTimer.
For unconditional-select, traffic is switched to and
stays on the selected path regardless of the path's
condition even if it is in a failure state.ro Enumeration .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.30 |
mplsLspPathSelectPathnameThe user-selected pathname when the mplsLspPathSelectMode
is either 'manual' or 'unconditional'.ro DisplayString .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.31 |
mplsLspPathSelectRevertTimerThe number of seconds to wait after the primary or selected
path comes up before traffic reverts to that path.
A value of 0 indicates that it will switch immediately
after the current working path goes down.ro Unsigned32 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.32 |
mplsLspShortcutOspfAllowedIndicates that this LSP allows shortcut between nodes in an AS.
OSPF includes the LSP in its SPF calculation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.33 |
mplsLspShortcutIsisAllowedIndicates that this LSP allows shortcut through the
network to a destination based on the path's cost (metric).
Traffic is forwarded through this LSP to destinations
within the IS-IS routing domain. IS-IS includes the LSP
in its SPF calculation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.34 |
mplsLspShortcutIsisLevelIndicates the level of IS-IS routing enabled on the device.
The value of this variable is meaningless if the
mplsLspShortcutIsisAllowed is 'false'.ro Enumeration .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.35 |
mplsLspShortcutIsisAnnounceIndicates that this IS-IS shortcut will be announced or
advertised. The metric to announce is specified by
mplsLspShortcutIsisAnnounceMetric.
The value of this variable is meaningless if the
mplsLspShortcutIsisAllowed is 'false'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.36 |
mplsLspShortcutIsisAnnounceMetricIndicates the metric value to announce for this shortcut.
The value of this variable is meaningless if the
mplsLspShortcutIsisAnnounce is 'false'. Default value is 10.ro Integer32 .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.37 |
mplsLspShortcutIsisRelativeMetricIndicates the relative metric used to compute the LSP cost
when announce is not enabled.
The value of this variable is meaningless if the
mplsLspShortcutIsisAllowed is 'false'.ro Integer32 (-16777215..16777215) .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.38 |
mplsVllInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.1.3 |
mplsVplsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1991.1.2.15.1.4 |