F3-SYNCJACK-MIB
AI MIB Summary
The F3-SYNCJACK-MIB module provides SNMP management interfaces for ADVA FSP150CM/CC optical transport equipment to monitor synchronization jack status and timing parameters. It enables the tracking of clock synchronization states, signal quality metrics, and interface availability critical for maintaining network timing integrity in carrier-grade deployments.
This module defines the Sync Jack MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Main OID:
f3SyncJMIB.1.3.6.1.4.1.2544.1.12.22
367
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
367 total| Object Name |
|---|
f3SyncJMIBThis module defines the Sync Jack MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.22 |
f3SyncJConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.22.1 |
f3SyncJClockProbeTableA list of entries corresponding to the SyncJack Clock Probe. SEQUENCE OF F3SyncJClockProbeEntry .1.3.6.1.4.1.2544.1.12.22.1.1 |
f3SyncJClockProbeEntryAn entry containing information applicable to a particular
SyncJack Clock Probe. F3SyncJClockProbeEntry .1.3.6.1.4.1.2544.1.12.22.1.1.1 |
f3SyncJClockProbeIndexUnique index value associated with the Clock Probe. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.1 |
f3SyncJClockProbeNameThis object allows SNMP management entities to provide a
name to the Clock Probe entity.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.1.1.2 |
f3SyncJClockProbeSourceThis object allows setting up of the TIE Source Entity.
Clock Probe compares this with the f3SyncJClockProbeReference
and computes TIE, MTIE.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.3 |
f3SyncJClockProbeReferenceThis object allows setting up of the TIE Reference Entity.
Clock Probe compares this with the f3SyncJClockProbeSource
and computes TIE, MTIE.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.4 |
f3SyncJClockProbeExpectedQLThis object represents the minimum expected Quality Level
when bits-in and sync-e PHY are references.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.22.1.1.1.5 |
f3SyncJClockProbeSourceTypeThis object represents the Clock Probe source type.rw TIESourceType .1.3.6.1.4.1.2544.1.12.22.1.1.1.6 |
f3SyncJClockProbeMeasurementRateThis object represents the actual Clock Probe measurement rate.ro TIEMeasurementRate .1.3.6.1.4.1.2544.1.12.22.1.1.1.7 |
f3SyncJClockProbeMTIEMaskTypeThis object represents the MTIE Mask Type.rw MTIEMaskType .1.3.6.1.4.1.2544.1.12.22.1.1.1.8 |
f3SyncJClockProbeMTIEMaskMarginThis object specifies the MTIE Mask Margin in percentage below the
MTIE mask for alarm report. Value of 0 means no margin.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.9 |
f3SyncJClockProbeSchedulerThis object provides the associated scheduler instance, if one
exists, with this Clock Probe. This value is 0.0, if there is no
scheduler associated with the Clock Probe.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.10 |
f3SyncJClockProbeTestStateThis object provides the Clock Probe test state.ro SyncJackTestState .1.3.6.1.4.1.2544.1.12.22.1.1.1.11 |
f3SyncJClockProbeLastTIEResultThis object provides last TIE result in nanoseconds.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.12 |
f3SyncJClockProbeLastTIEResultTimeThis object provides the time associated with the last TIE result.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.13 |
f3SyncJClockProbeSourceFailureThis object provides information on whether the source failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.14 |
f3SyncJClockProbeReferenceFailureThis object provides information on whether the reference failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.15 |
f3SyncJClockProbeActualTestStartTimeThis object provides information on the actual test start time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.16 |
f3SyncJClockProbeActualTestDurationThis object provides information on the actual test duration in seconds.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.17 |
f3SyncJClockProbeMTIEMaskCrossedTimeThis object provides the time when the MTIE mask was crossed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.18 |
f3SyncJClockProbeMTIEMaskMarginCrossedTimeThis object provides the time when the MTIE mask margin was crossed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.19 |
f3SyncJClockProbeStatusMTIEMaskFailedThis object provides the result status, whether MTIE Mask has failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.20 |
f3SyncJClockProbeStatusMTIEMarginFailedThis object provides the result status, whether MTIE Margin has failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.21 |
f3SyncJClockProbeStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.22 |
f3SyncJClockProbeRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3SyncJClockProbeRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3SyncJClockProbeRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3SyncJClockProbeRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.23 |
f3SyncJClockProbeFfoTargetThe FFO target for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.24 |
f3SyncJClockProbeFfoObserWindowThe FFO obserwer window for this entry.rw FFOObserWindow .1.3.6.1.4.1.2544.1.12.22.1.1.1.25 |
f3SyncJClockProbeLastFFOResultThe last FFO result for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.26 |
f3SyncJClockProbeTimeOfLastFFOResultThe time of last FFO result for this entry.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.27 |
f3SyncJClockProbeRawDataCollectionEnabledThe raw data collection enabled for this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.28 |
f3SyncJClockProbeTeAlertThresholdThe TE alert threshold configured for this entry.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.29 |
f3SyncJClockProbeTeAlertClearThresholdThe TE alert clear threshold configured for this entry.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.30 |
f3SyncJClockProbeLastTEAlertTimeThe last TE alert time for this entry.rodeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.31 |
f3SyncJClockProbeLastTEAlertClearTimeThe last TE alert clear time for this entry.rodeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.1.1.32 |
f3SyncJClockProbeRunningFailedCountThe running failed count for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.33 |
f3SyncJClockProbeMeasurementTypeThe measurement type configured for this entry.rw MeasurementType .1.3.6.1.4.1.2544.1.12.22.1.1.1.34 |
f3SyncJClockProbeConstTEThresholdThe Constant Time Error Alert threshold (ns).rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.35 |
f3SyncJClockProbeConstTEClrThresholdThe Constant Time Error Alert Clear threshold (ns).rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.36 |
f3SyncJClockProbeConstTEWindowThe Averaging window used for Constant TE calculation (sec).rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.37 |
f3SyncJClockProbeMaxTETotAlarmTimeThe Total time in seconds Max TE has been measuredro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.38 |
f3SyncJClockProbeConstTETotAlarmTimeThe Total time in seconds Constant TE has been measured.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.39 |
f3SyncJClockProbeConstTEMeasurementTimeThe Const TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.40 |
f3SyncJClockProbeMaxTEMeasurementTimeThe Max TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.41 |
f3SyncJClockProbeMaxTEThresholdThe TE Max threshold configured for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.42 |
f3SyncJClockProbeMaxTEClrThresholdThe TE Max clear threshold configured for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.1.1.43 |
f3SyncJClockProbeMTIEValueTableA list of entries corresponding to the Clock Probe's MTIE Result
Values. SEQUENCE OF F3SyncJClockProbeMTIEValueEntry .1.3.6.1.4.1.2544.1.12.22.1.2 |
f3SyncJClockProbeMTIEValueEntryAn entry containing information applicable to a particular
Clock Probe's MTIE Result Value. F3SyncJClockProbeMTIEValueEntry .1.3.6.1.4.1.2544.1.12.22.1.2.1 |
f3SyncJClockProbeMTIEValueIndexUnique index value associated with the Clock Probe Result Value. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.2.1.1 |
f3SyncJClockProbeMTIEValueThis object allows SNMP management entities to retrieve
MTIE Result Values in nanoseconds.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.2.1.2 |
f3SyncJClockProbeResHistoryTableA list of entries corresponding to the SyncJack Clock Probe Result
History. SEQUENCE OF F3SyncJClockProbeResHistoryEntry .1.3.6.1.4.1.2544.1.12.22.1.3 |
f3SyncJClockProbeResHistoryEntryAn entry containing information applicable to a particular
SyncJack Clock Probe Result History. F3SyncJClockProbeResHistoryEntry .1.3.6.1.4.1.2544.1.12.22.1.3.1 |
f3SyncJClockProbeResHistoryIndexUnique index value associated with the Clock Probe. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.1 |
f3SyncJClockProbeResHistoryAliasThis object provides alias of the Clock Probe result history.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.3.1.2 |
f3SyncJClockProbeResHistorySourceThis object provides the source for TIE computation.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.3 |
f3SyncJClockProbeResHistoryReferenceThis object provides the reference for TIE computation.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.4 |
f3SyncJClockProbeResHistoryExpectedQLThis object provides the minimum expected Quality Level
when bits-in and sync-e PHY are references.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.22.1.3.1.5 |
f3SyncJClockProbeResHistorySourceTypeThis object provides the Clock Probe source type.ro TIESourceType .1.3.6.1.4.1.2544.1.12.22.1.3.1.6 |
f3SyncJClockProbeResHistoryMeasurementRateThis object provides the actual Clock Probe measurement rate.ro TIEMeasurementRate .1.3.6.1.4.1.2544.1.12.22.1.3.1.7 |
f3SyncJClockProbeResHistoryMTIEMaskTypeThis object provides the MTIE Mask Type.ro MTIEMaskType .1.3.6.1.4.1.2544.1.12.22.1.3.1.8 |
f3SyncJClockProbeResHistoryMTIEMaskMarginThis object provides the MTIE Mask Margin.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.9 |
f3SyncJClockProbeResHistorySourceFailureThis object provides information on whether the source failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.10 |
f3SyncJClockProbeResHistoryReferenceFailureThis object provides information on whether the reference failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.11 |
f3SyncJClockProbeResHistoryActualTestStartTimeThis object provides information on the actual test start time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.12 |
f3SyncJClockProbeResHistoryActualTestDurationThis object provides information on the actual test duration in seconds.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.13 |
f3SyncJClockProbeResHistoryMTIEMaskCrossedTimeThis object provides the time when the MTIE mask was crossed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.14 |
f3SyncJClockProbeResHistoryMTIEMaskMarginCrossedTimeThis object provides the time when the MTIE mask
margin was crossed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.15 |
f3SyncJClockProbeResHistoryStatusMTIEMaskFailedThis object provides the result status, whether
MTIE Mask has failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.16 |
f3SyncJClockProbeResHistoryStatusMTIEMarginFailedThis object provides the result status,
whether MTIE Margin has failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.17 |
f3SyncJClockProbeResHistoryStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.18 |
f3SyncJClockProbeResHistoryRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3SyncJClockProbeResHistoryRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3SyncJClockProbeResHistoryRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3SyncJClockProbeResHistoryRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.19 |
f3SyncJClockProbeResHistoryMinFFOThe Min FFO configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.20 |
f3SyncJClockProbeResHistoryMaxFFOThe Max FFO configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.21 |
f3SyncJClockProbeResHistoryAvgFFOThe average FFO configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.22 |
f3SyncJClockProbeResHistoryOutOfTargetFFOTimeThe out of target FFO time configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.23 |
f3SyncJClockProbeResHistoryTotalFFOTimeThe total FFO time configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.24 |
f3SyncJClockProbeResHistoryMinPhaseOffsetThe Min phase offset configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.25 |
f3SyncJClockProbeResHistoryMaxPhaseOffsetThe Max phase offset configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.26 |
f3SyncJClockProbeResHistoryAvgPhaseOffsetThe average phase offset configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.27 |
f3SyncJClockProbeResHistoryOutOfTargetPhaseOffsetTimeThe out of target phase offset time configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.28 |
f3SyncJClockProbeResHistoryTotalPhaseOffsetTimeThe total phase offset time configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.29 |
f3SyncJClockProbeResHistoryMeasurementTypeThe measurement type configured for this entry.ro MeasurementType .1.3.6.1.4.1.2544.1.12.22.1.3.1.30 |
f3SyncJClockProbeResHistoryTeAlertThresholdThe TE alert threshold configured for this entry.rodeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.31 |
f3SyncJClockProbeResHistoryTeAlertClearThresholdThe TE alert clear threshold configured for this entry.rodeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.32 |
f3SyncJClockProbeResHistoryLastTEAlertTimeThe last TE alert time for this entry.rodeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.33 |
f3SyncJClockProbeResHistoryLastTEAlertClearTimeThe last TE alert clear time for this entry.rodeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.3.1.34 |
f3SyncJClockProbeResHistoryRunningFailedCountThe running failed count for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.35 |
f3SyncJClockProbeResHistoryConstTEThresholdThe Constant Time Error Alert threshold (ns).ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.36 |
f3SyncJClockProbeResHistoryConstTEClrThresholdThe Constant Time Error Alert Clear threshold (ns).ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.37 |
f3SyncJClockProbeResHistoryConstTEWindowThe Averaging window used for Constant TE calculation (sec).ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.38 |
f3SyncJClockProbeResHistoryMaxTETotAlarmTimeThe Total time in seconds Max TE has been measuredro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.39 |
f3SyncJClockProbeResHistoryConstTETotAlarmTimeThe Total time in seconds Constant TE has been measured.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.40 |
f3SyncJClockProbeResHistoryConstTEMeasurementTimeThe Const TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.41 |
f3SyncJClockProbeResHistoryMaxTEMeasurementTimeThe Max TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.42 |
f3SyncJClockProbeResHistoryMaxTEThresholdThe TE Max threshold configured for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.43 |
f3SyncJClockProbeResHistoryMaxTEClrThresholdThe TE Max clear threshold configured for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.3.1.44 |
f3SyncJClockProbeResHistoryMTIEValueTableA list of histgory entries corresponding to the
Clock Probe's MTIE Result Values. SEQUENCE OF F3SyncJClockProbeResHistoryMTIEValueEntry .1.3.6.1.4.1.2544.1.12.22.1.4 |
f3SyncJClockProbeResHistoryMTIEValueEntryAn entry containing information applicable to a particular
Clock Probe's MTIE Result Value. F3SyncJClockProbeResHistoryMTIEValueEntry .1.3.6.1.4.1.2544.1.12.22.1.4.1 |
f3SyncJClockProbeResHistoryMTIEValueIndexUnique index value associated with the Clock Probe
History Result Value. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.4.1.1 |
f3SyncJClockProbeResHistoryMTIEValueThis object allows SNMP management entities to retrieve
MTIE Result Values in nanoseconds.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.4.1.2 |
f3SyncJPTPClockProbeTableA list of entries corresponding to the SyncJack PTP Clock Probes. SEQUENCE OF F3SyncJPTPClockProbeEntry .1.3.6.1.4.1.2544.1.12.22.1.5 |
f3SyncJPTPClockProbeEntryAn entry containing information applicable to a particular
SyncJack PTP Clock Probe. F3SyncJPTPClockProbeEntry .1.3.6.1.4.1.2544.1.12.22.1.5.1 |
f3SyncJPTPClockProbeIndexUnique index value associated with the PTP Clock Probe. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.1 |
f3SyncJPTPClockProbeNameThis object allows SNMP management entities to provide an
name to the PTP Clock Probe entity. This is used
for creation of the underlying IP Interface associated
with the PTP Clock Probe entity.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.5.1.2 |
f3SyncJPTPClockProbeMeasurementDirectionThis object allows SNMP management entities to specify the
Measurement Direction to the PTP Clock Probe entity.rw PTPMeasurementDirection .1.3.6.1.4.1.2544.1.12.22.1.5.1.3 |
f3SyncJPTPClockProbePTPFlowPointThis object allows SNMP management entities to specify the
PTP Flow Point to use as source for PTP Clock Probe measurements.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.4 |
f3SyncJPTPClockProbeIpPrototocolThis object allows SNMP management entities to specify the
IP Protocol used for PTP communication.rw IpVersion (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.1.5.1.5 |
f3SyncJPTPClockProbeSlaveIpV4AddressThis object allows SNMP management entities to specify the
Slave IP Address associated with the PTP Clock Probe.rw IpAddress .1.3.6.1.4.1.2544.1.12.22.1.5.1.6 |
f3SyncJPTPClockProbeMasterIpV4AddressThis object allows SNMP management entities to specify the
Master IP Address associated with the PTP Clock Probe.rw IpAddress .1.3.6.1.4.1.2544.1.12.22.1.5.1.7 |
f3SyncJPTPClockProbeReferenceThis object allows setting up of the PTP Clock Probe
TIE Reference Entity. PTP Clock Probe compares this with the
PTP Master/Slave entity configured using
f3SyncJPTPClockProbeMasterIpV4Address/f3SyncJPTPClockProbeSlaveIpV4Address
and computes TIE, MTIE.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.8 |
f3SyncJPTPClockProbeExpectedQLThis object represents the minimum expected Quality Level
when bits-in and sync-e PHY are references.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.22.1.5.1.9 |
f3SyncJPTPClockProbeMTIEMaskTypeThis object represents the MTIE Mask Type.rw MTIEMaskType .1.3.6.1.4.1.2544.1.12.22.1.5.1.10 |
f3SyncJPTPClockProbeMTIEMaskMarginThis object represents the MTIE Mask Margin.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.11 |
f3SyncJPTPClockProbeSchedulerThis object provides the associated scheduler instance, if one
exists, with this PTP Clock Probe. This value is 0.0, if there is no
scheduler associated with the PTP Clock Probe.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.12 |
f3SyncJPTPClockProbeTestStateThis object provides the PTP Clock Probe test state.ro SyncJackTestState .1.3.6.1.4.1.2544.1.12.22.1.5.1.13 |
f3SyncJPTPClockProbeLastTIEResultThis object provides last TIE result in nanoseconds.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.14 |
f3SyncJPTPClockProbeLastTIEResultTimeThis object provides the time associated with the last TIE result.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.15 |
f3SyncJPTPClockProbeNoTimestampFailureThis object provides information on whether the measured PTP source
indicated a no-timestamp failure.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.16 |
f3SyncJPTPClockProbeNoEventMessageFailureThis object provides information on whether the measured PTP source
indicated a no-event message failure.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.17 |
f3SyncJPTPClockProbeReferenceFailureThis object provides information on whether the reference failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.18 |
f3SyncJPTPClockProbeActualTestStartTimeThis object provides information on the actual test start time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.19 |
f3SyncJPTPClockProbeActualTestDurationThis object provides information on the actual test duration in seconds.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.20 |
f3SyncJPTPClockProbeMTIEMaskCrossedTimeThis object provides the time when the MTIE mask was crossed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.21 |
f3SyncJPTPClockProbeMTIEMaskMarginCrossedTimeThis object provides the time when the MTIE mask margin was crossed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.22 |
f3SyncJPTPClockProbeStatusMTIEMaskFailedThis object provides the result status, whether MTIE Mask has failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.23 |
f3SyncJPTPClockProbeStatusMTIEMarginFailedThis object provides the result status, whether MTIE Margin has failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.24 |
f3SyncJPTPClockProbeStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.25 |
f3SyncJPTPClockProbeRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3SyncJPTPClockProbeRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3SyncJPTPClockProbeRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3SyncJPTPClockProbeRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.26 |
f3SyncJPTPClockProbeFfoTargetThe FFO target for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.27 |
f3SyncJPTPClockProbeFfoObserWindowThe FFO obserwer window for this entry.rw FFOObserWindow .1.3.6.1.4.1.2544.1.12.22.1.5.1.28 |
f3SyncJPTPClockProbeLastFFOResultThe last FFO result for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.29 |
f3SyncJPTPClockProbeTimeOfLastFFOResultThe time of last FFO result for this entry.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.30 |
f3SyncJPTPClockProbeRawDataCollectionEnabledThe raw data collection enabled for this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.31 |
f3SyncJPTPClockProbeTeAlertThresholdThe TE alert threshold configured for this entry.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.32 |
f3SyncJPTPClockProbeTeAlertClearThresholdThe TE alert clear threshold configured for this entry.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.33 |
f3SyncJPTPClockProbeLastTEAlertTimeThe last TE alert time for this entry.rodeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.34 |
f3SyncJPTPClockProbeLastTEAlertClearTimeThe last TE alert clear time for this entry.rodeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.5.1.35 |
f3SyncJPTPClockProbeRunningFailedCountThe running failed count for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.36 |
f3SyncJPTPClockProbeMeasurementTypeThe measurement type configured for this entry.rw MeasurementType .1.3.6.1.4.1.2544.1.12.22.1.5.1.37 |
f3SyncJPTPClockProbeDelayMSThe delay MS for this entry.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.38 |
f3SyncJPTPClockProbeDelaySMThe delay SM for this entry.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.39 |
f3SyncJPTPClockProbeTAsymmetryThe Slave to Master Delay Asymmetry configured for this entity.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.40 |
f3SyncJPTPClockProbeDelayCompensationThe Delay Compensation configured for this entity.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.41 |
f3SyncJPTPClockProbeConstTEThresholdThe Constant Time Error Alert threshold (ns).rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.42 |
f3SyncJPTPClockProbeConstTEClrThresholdThe Constant Time Error Alert Clear threshold (ns).rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.43 |
f3SyncJPTPClockProbeConstTEWindowThe Averaging window used for Constant TE calculation (sec).rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.44 |
f3SyncJPTPClockProbeInstTEThresholdThe Instant Time Error Alert threshold (ns).rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.45 |
f3SyncJPTPClockProbeInstTEClrThresholdThe Instant Time Error Alert Clear threshold (ns).rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.46 |
f3SyncJPTPClockProbeMaxTETotAlarmTimeThe Total time in seconds Max TE has been measuredro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.47 |
f3SyncJPTPClockProbeConstTETotAlarmTimeThe Total time in seconds Constant TE has been measured.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.48 |
f3SyncJPTPClockProbeInstTETotAlarmTimeThe Total time in seconds Instant TE has been measured.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.49 |
f3SyncJPTPClockProbeSlavePortIdentityThe Tested Slave Port Identity.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.5.1.50 |
f3SyncJPTPClockProbeMasterPortIdentityThe Tested Master Port Identity.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.5.1.51 |
f3SyncJPTPClockProbeConstTEMeasurementTimeThe Const TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.52 |
f3SyncJPTPClockProbeMaxTEMeasurementTimeThe Max TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.53 |
f3SyncJPTPClockProbeInstTEMeasurementTimeThe Inst TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.54 |
f3SyncJPTPClockProbeMaxTEThresholdThe TE Max threshold configured for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.55 |
f3SyncJPTPClockProbeMaxTEClrThresholdThe TE Max clear threshold configured for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.5.1.56 |
f3SyncJPTPClockProbeMTIEValueTableA list of entries corresponding to the PTP Clock Probe's MTIE Result
Values. SEQUENCE OF F3SyncJPTPClockProbeMTIEValueEntry .1.3.6.1.4.1.2544.1.12.22.1.6 |
f3SyncJPTPClockProbeMTIEValueEntryAn entry containing information applicable to a particular
PTP Clock Probe's MTIE Result Value. F3SyncJPTPClockProbeMTIEValueEntry .1.3.6.1.4.1.2544.1.12.22.1.6.1 |
f3SyncJPTPClockProbeMTIEValueIndexUnique index value associated with the PTP Clock Probe Result Value. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.6.1.1 |
f3SyncJPTPClockProbeMTIEValueThis object allows SNMP management entities to retrieve
MTIE Result Values in nanoseconds.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.6.1.2 |
f3SyncJPTPClockProbeResHistoryTableA list of entries corresponding to the SyncJack PTP Clock Probe Result
History. SEQUENCE OF F3SyncJPTPClockProbeResHistoryEntry .1.3.6.1.4.1.2544.1.12.22.1.7 |
f3SyncJPTPClockProbeResHistoryEntryAn entry containing information applicable to a particular
SyncJack PTP Clock Probe Result History. F3SyncJPTPClockProbeResHistoryEntry .1.3.6.1.4.1.2544.1.12.22.1.7.1 |
f3SyncJPTPClockProbeResHistoryIndexUnique index value associated with the PTP Clock Probe. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.1 |
f3SyncJPTPClockProbeResHistoryAliasThis object provides alias of the PTP Clock Probe result history.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.7.1.2 |
f3SyncJPTPClockProbeResHistoryMeasurementDirectionThis object specifies the Measurement Direction to the PTP Clock Probe entity.ro PTPMeasurementDirection .1.3.6.1.4.1.2544.1.12.22.1.7.1.3 |
f3SyncJPTPClockProbeResHistoryPTPFlowPointThis object indicates the PTP Flow Point used as
source for PTP Clock Probe measurements.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.4 |
f3SyncJPTPClockProbeResHistoryIpPrototocolThis object indicates the IP Protocol used for PTP communication.ro IpVersion (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.1.7.1.5 |
f3SyncJPTPClockProbeResHistorySlaveIpV4AddressThis object indicates the
Slave IP Address associated with the PTP Clock Probe.ro IpAddress .1.3.6.1.4.1.2544.1.12.22.1.7.1.6 |
f3SyncJPTPClockProbeResHistoryMasterIpV4AddressThis object indicates the
Master IP Address associated with the PTP Clock Probe.ro IpAddress .1.3.6.1.4.1.2544.1.12.22.1.7.1.7 |
f3SyncJPTPClockProbeResHistoryReferenceThis object indicates the PTP Clock Probe
PTP Clock Probe Entity. PTP Clock Probe compares this with the
PTP Master/Slave entity configured using
f3SyncJPTPClockProbeMasterIpV4Address/f3SyncJPTPClockProbeSlaveIpV4Address
and computes TIE, MTIE.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.8 |
f3SyncJPTPClockProbeResHistoryExpectedQLThis object represents the minimum expected Quality Level
when bits-in and sync-e PHY are references.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.22.1.7.1.9 |
f3SyncJPTPClockProbeResHistoryMTIEMaskTypeThis object represents the MTIE Mask Type.ro MTIEMaskType .1.3.6.1.4.1.2544.1.12.22.1.7.1.10 |
f3SyncJPTPClockProbeResHistoryMTIEMaskMarginThis object represents the MTIE Mask Margin.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.11 |
f3SyncJPTPClockProbeResHistoryNoTimestampFailureThis object provides information on whether the measured PTP source
indicated a no-timestamp failure.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.12 |
f3SyncJPTPClockProbeResHistoryNoEventMessageFailureThis object provides information on whether the measured PTP source
indicated a no-event message failure.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.13 |
f3SyncJPTPClockProbeResHistoryReferenceFailureThis object provides information on whether the reference failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.14 |
f3SyncJPTPClockProbeResHistoryActualTestStartTimeThis object provides the time when the actual test was started.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.15 |
f3SyncJPTPClockProbeResHistoryActualTestDurationThis object provides information on the actual test duration in seconds.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.16 |
f3SyncJPTPClockProbeResHistoryMTIEMaskCrossedTimeThis object provides the time when the MTIE mask was crossed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.17 |
f3SyncJPTPClockProbeResHistoryMTIEMaskMarginCrossedTimeThis object provides the time when the MTIE mask margin was crossed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.18 |
f3SyncJPTPClockProbeResHistoryStatusMTIEMaskFailedThis object provides the result status, whether MTIE Mask has failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.19 |
f3SyncJPTPClockProbeResHistoryStatusMTIEMarginFailedThis object provides the result status, whether MTIE Margin has failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.20 |
f3SyncJPTPClockProbeResHistoryStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.21 |
f3SyncJPTPClockProbeResHistoryRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3SyncJPTPClockProbeResHistoryRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3SyncJPTPClockProbeResHistoryRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3SyncJPTPClockProbeResHistoryRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.22 |
f3SyncJPTPClockProbeResHistoryMinFFOThe Min FFO configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.23 |
f3SyncJPTPClockProbeResHistoryMaxFFOThe Max FFO configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.24 |
f3SyncJPTPClockProbeResHistoryAvgFFOThe average FFO configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.25 |
f3SyncJPTPClockProbeResHistoryOutOfTargetFFOTimeThe out of target FFO time configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.26 |
f3SyncJPTPClockProbeResHistoryTotalFFOTimeThe total FFO time configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.27 |
f3SyncJPTPClockProbeResHistoryMinPhaseOffsetThe Min phase offset configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.28 |
f3SyncJPTPClockProbeResHistoryMaxPhaseOffsetThe Max phase offset configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.29 |
f3SyncJPTPClockProbeResHistoryAvgPhaseOffsetThe average phase offset configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.30 |
f3SyncJPTPClockProbeResHistoryOutOfTargetPhaseOffsetTimeThe out of target phase offset time configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.31 |
f3SyncJPTPClockProbeResHistoryTotalPhaseOffsetTimeThe total phase offset time configured for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.32 |
f3SyncJPTPClockProbeResHistoryTeAlertThresholdThe TE alert threshold configured for this entry.rodeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.33 |
f3SyncJPTPClockProbeResHistoryTeAlertClearThresholdThe TE alert clear threshold configured for this entry.rodeprecated Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.34 |
f3SyncJPTPClockProbeResHistoryLastTEAlertTimeThe last TE alert time for this entry.rodeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.35 |
f3SyncJPTPClockProbeResHistoryLastTEAlertClearTimeThe last TE alert clear time for this entry.rodeprecated DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.7.1.36 |
f3SyncJPTPClockProbeResHistoryRunningFailedCountThe running failed count for this entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.37 |
f3SyncJPTPClockProbeResHistoryMeasurementTypeThe measurement type configured for this entry.ro MeasurementType .1.3.6.1.4.1.2544.1.12.22.1.7.1.38 |
f3SyncJPTPClockProbeResHistoryConstTEThresholdThe Constant Time Error Alert threshold (ns).ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.39 |
f3SyncJPTPClockProbeResHistoryConstTEClrThresholdThe Constant Time Error Alert Clear threshold (ns).ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.40 |
f3SyncJPTPClockProbeResHistoryConstTEWindowThe Averaging window used for Constant TE calculation (sec).ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.41 |
f3SyncJPTPClockProbeResHistoryInstTEThresholdThe Instant Time Error Alert threshold (ns).ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.42 |
f3SyncJPTPClockProbeResHistoryInstTEClrThresholdThe Instant Time Error Alert Clear threshold (ns).ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.43 |
f3SyncJPTPClockProbeResHistoryMaxTETotAlarmTimeThe Total time in seconds Max TE has been measuredro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.44 |
f3SyncJPTPClockProbeResHistoryConstTETotAlarmTimeThe Total time in seconds Constant TE has been measured.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.45 |
f3SyncJPTPClockProbeResHistoryInstTETotAlarmTimeThe Total time in seconds Instant TE has been measured.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.46 |
f3SyncJPTPClockProbeResHistorySlavePortIdentityThe Tested Slave Port Identity.ro DisplayString .1.3.6.1.4.1.2544.1.12.22.1.7.1.47 |
f3SyncJPTPClockProbeResHistoryMasterPortIdentityThe Tested Master Port Identity.ro DisplayString .1.3.6.1.4.1.2544.1.12.22.1.7.1.48 |
f3SyncJPTPClockProbeResHistoryConstTEMeasurementTimeThe Const TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.49 |
f3SyncJPTPClockProbeResHistoryMaxTEMeasurementTimeThe Max TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.50 |
f3SyncJPTPClockProbeResHistoryInstTEMeasurementTimeThe Inst TE Measurement Time for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.51 |
f3SyncJPTPClockProbeResHistoryMaxTEThresholdThe TE Max threshold configured for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.52 |
f3SyncJPTPClockProbeResHistoryMaxTEClrThresholdThe TE Max clear threshold configured for this entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.22.1.7.1.53 |
f3SyncJPTPClockProbeResHistoryMTIEValueTableA list of histgory entries corresponding to the
PTP Clock Probe's MTIE Result Values. SEQUENCE OF F3SyncJPTPClockProbeResHistoryMTIEValueEntry .1.3.6.1.4.1.2544.1.12.22.1.8 |
f3SyncJPTPClockProbeResHistoryMTIEValueEntryAn entry containing information applicable to a particular
PTP Clock Probe's MTIE Result Value. F3SyncJPTPClockProbeResHistoryMTIEValueEntry .1.3.6.1.4.1.2544.1.12.22.1.8.1 |
f3SyncJPTPClockProbeResHistoryMTIEValueIndexUnique index value associated with the PTP Clock Probe
History Result Value. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.8.1.1 |
f3SyncJPTPClockProbeResHistoryMTIEValueThis object allows SNMP management entities to retrieve
MTIE Result Values in nanoseconds.ro Integer32 .1.3.6.1.4.1.2544.1.12.22.1.8.1.2 |
f3SyncJPTPNetworkProbeTableA list of entries corresponding to the SyncJack PTP Network Probes. SEQUENCE OF F3SyncJPTPNetworkProbeEntry .1.3.6.1.4.1.2544.1.12.22.1.9 |
f3SyncJPTPNetworkProbeEntryAn entry containing information applicable to a particular
SyncJack PTP Network Probe. F3SyncJPTPNetworkProbeEntry .1.3.6.1.4.1.2544.1.12.22.1.9.1 |
f3SyncJPTPNetworkProbeIndexUnique index value associated with the PTP Network Probe. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.1 |
f3SyncJPTPNetworkProbeNameThis object allows SNMP management entities to provide a
name to the PTP Network Probe entity.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.9.1.2 |
f3SyncJPTPNetworkProbeAdminStateThis object represents the Administrative State of the
PTP Network Probe. This is not externally managed.ro AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.1.9.1.3 |
f3SyncJPTPNetworkProbeOperationalStateThis object represents the Operational State of the PTP Network Probe.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.1.9.1.4 |
f3SyncJPTPNetworkProbeSecondaryStateThis object represents the Secondary State of the PTP Network Probe.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.1.9.1.5 |
f3SyncJPTPNetworkProbePTPFlowPointThis object allows SNMP management entities to specify the
PTP Flow Point to use as source for PTP Network Probe measurements.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.6 |
f3SyncJPTPNetworkProbeIpPrototocolThis object allows SNMP management entities to specify the
IP Protocol used for PTP communication.rw IpVersion (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.1.9.1.7 |
f3SyncJPTPNetworkProbeSlaveIpV4AddressThis object allows SNMP management entities to specify the
Slave IP Address associated with the PTP Network Probe.rw IpAddress .1.3.6.1.4.1.2544.1.12.22.1.9.1.8 |
f3SyncJPTPNetworkProbeMasterIpV4AddressThis object allows SNMP management entities to specify the
Master IP Address associated with the PTP Network Probe.rw IpAddress .1.3.6.1.4.1.2544.1.12.22.1.9.1.9 |
f3SyncJPTPNetworkProbeReferenceThis object allows setting up of the PTP Network Probe
Reference Entity.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.10 |
f3SyncJPTPNetworkProbeExpectedQLThis object represents the minimum expected Quality Level
when bits-in and sync-e PHY are references.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.22.1.9.1.11 |
f3SyncJPTPNetworkProbeActualTestStartTimeThis object provides information on the actual test start time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.12 |
f3SyncJPTPNetworkProbeActualTestDurationThis object provides information on the actual test duration in seconds.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.13 |
f3SyncJPTPNetworkProbePDVAssuredHiThis object allows configuration of the higher order 32 bits of the
assured level packet delay variation network limit for the PTP
Network Probe, in nanoseconds.
This helps in computing the network usability score.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.14 |
f3SyncJPTPNetworkProbePDVAssuredLoThis object allows configuration of the lower order 32 bits of the
assured level packet delay variation network limit for the PTP
Network Probe, in nanoseconds.
This helps in computing the network usability score.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.15 |
f3SyncJPTPNetworkProbePDVSatisfiedHiThis object allows configuration of the higher order 32 bits of the
satisfied level of packet delay variation network limit for the
PTP Network Probe, in nanoseconds.
This helps in computing the network usability score.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.16 |
f3SyncJPTPNetworkProbePDVSatisfiedLoThis object allows configuration of the lower order 32 bits of the
satisfied level of packet delay variation network limit for the
PTP Network Probe, in nanoseconds.
This helps in computing the network usability score.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.17 |
f3SyncJPTPNetworkProbeResPDVFwdLowRangeThis object allows configuration of the low range for
Residual Path Delay Variation statistics in the forward
direction (i.e. master to slave), in nanoseconds.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.18 |
f3SyncJPTPNetworkProbeResPDVFwdMediumRangeThis object allows configuration of the medium range for
Residual Path Delay Variation statistics in the forward
direction (i.e. master to slave), in nanoseconds.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.19 |
f3SyncJPTPNetworkProbeResPDVFwdHighRangeThis object allows configuration of the high range for
Residual Path Delay Variation statistics in the forward
direction (i.e. master to slave), in nanoseconds.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.20 |
f3SyncJPTPNetworkProbeResPDVRevLowRangeThis object allows configuration of the low range for
Residual Path Delay Variation statistics in the reverse
direction (i.e. slave to master), in nanoseconds.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.21 |
f3SyncJPTPNetworkProbeResPDVRevMediumRangeThis object allows configuration of the medium range for
Residual Path Delay Variation statistics in the reverse
direction (i.e. slave to master), in nanoseconds.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.22 |
f3SyncJPTPNetworkProbeResPDVRevHighRangeThis object allows configuration of the high range for
Residual Path Delay Variation statistics in the reverse
direction (i.e. slave to master), in nanoseconds.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.23 |
f3SyncJPTPNetworkProbeSchedulerThis object provides the associated scheduler instance, if one
exists, with this PTP Network Probe. This value is 0.0, if there is no
scheduler associated with the PTP Network Probe.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.24 |
f3SyncJPTPNetworkProbeTestStateThis object provides the PTP Network Probe test state.ro SyncJackTestState .1.3.6.1.4.1.2544.1.12.22.1.9.1.25 |
f3SyncJPTPNetworkProbeNoTimestampFailureThis object provides information on whether the measured PTP source
indicated a no-timestamp failure.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.26 |
f3SyncJPTPNetworkProbeNoEventMessageFailureThis object provides information on whether the measured PTP source
indicated a no-event message failure.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.27 |
f3SyncJPTPNetworkProbeFwdScoreThis object provides the current score in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.28 |
f3SyncJPTPNetworkProbeRevScoreThis object provides the current score in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.9.1.29 |
f3SyncJPTPNetworkProbeReferenceFailureThis object provides information on whether the reference failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.30 |
f3SyncJPTPNetworkProbeStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.31 |
f3SyncJPTPNetworkProbeRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3SyncJPTPNetworkProbeRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3SyncJPTPNetworkProbeRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3SyncJPTPNetworkProbeRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.32 |
f3SyncJPTPNetworkProbeResultsAvailableThe results available configured for this entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.9.1.33 |
f3SyncJScheduleGroupTableA list of entries that allow a set of SyncJack Clock Probes,
PTP Clock Probes and PTP Network Probes to be scheduled. SEQUENCE OF F3SyncJScheduleGroupEntry .1.3.6.1.4.1.2544.1.12.22.1.10 |
f3SyncJScheduleGroupEntryA row in f3SyncJScheduleGroupTable. Entries are created
in this table by management application action. F3SyncJScheduleGroupEntry .1.3.6.1.4.1.2544.1.12.22.1.10.1 |
f3SyncJScheduleGroupIndexA unique index to distinguish the SyncJack Schedule Group. Integer32 .1.3.6.1.4.1.2544.1.12.22.1.10.1.1 |
f3SyncJScheduleGroupDescrDescription of the SyncJack schedule group.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.10.1.2 |
f3SyncJScheduleGroupEntityListA comma separated list of Clock Probes, PTP Clock Probes and PTP Network Probes,
that will have the same schedule.rw DisplayString .1.3.6.1.4.1.2544.1.12.22.1.10.1.3 |
f3SyncJScheduleGroupTypeThis object allows to specify the schedule group type of
the SyncJack Schedule group. Only 'one-shot' is supported.rw ScheduleType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.1.10.1.4 |
f3SyncJScheduleGroupStartTimeThis object allows specification of the start time
of the SyncJack Schedule Group.
Value of time less than current system time will equate to
current time. When the system time reaches
this configured time, the SyncJack Schedule Group will be activated.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.10.1.5 |
f3SyncJScheduleGroupDurationThis object allows specification of the duration in
'seconds' for SyncJack Schedule Group run. Note that a value of
4294967295 means Duration as FOREVER.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.1.10.1.6 |
f3SyncJScheduleGroupStatusThis object indicates the current status of the SyncJack Schedule Group.ro SchedActivityStatus (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.1.10.1.7 |
f3SyncJScheduleGroupStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.10.1.8 |
f3SyncJScheduleGroupRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3SyncJScheduleGroupRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3SyncJScheduleGroupRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The f3SyncJScheduleGroupRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.1.10.1.9 |
f3SyncJPerformanceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.22.2 |
f3SyncJPTPNetworkProbeStatsTableA collection of SyncJack PTP Network Probe statistics.
These reflect the current data. SEQUENCE OF F3SyncJPTPNetworkProbeStatsEntry .1.3.6.1.4.1.2544.1.12.22.2.1 |
f3SyncJPTPNetworkProbeStatsEntryA conceptual row in the f3SyncJPTPNetworkProbeStatsTable.
Entries exist in this table for each PTP Network Probe. F3SyncJPTPNetworkProbeStatsEntry .1.3.6.1.4.1.2544.1.12.22.2.1.1 |
f3SyncJPTPNetworkProbeStatsIndexAn arbitrary integer index value used to uniquely identify
this PTPNetworkProbe statistics entry.
Index 1 corresponds to 15minute, index 2 to 1 day and index
3 corresponds to rollover. Integer32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.1 |
f3SyncJPTPNetworkProbeStatsIntervalTypeIndicates the type of collection, i.e. whether it is
15 Min, 1 Day or rollover.ro CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.2 |
f3SyncJPTPNetworkProbeStatsValidIndicates the validity of the bin.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.2.1.1.3 |
f3SyncJPTPNetworkProbeStatsActionAllows the Manager to clear the bin.rw CmPmBinAction (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.4 |
f3SyncJPTPNetworkProbeStatsSyncMsgsRxNumber of PTP Sync messages received at the PTP Network Probe.ro PerfCounter32 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.5 |
f3SyncJPTPNetworkProbeStatsDelayRspMsgsRxNumber of PTP Delay Response messages received at
the PTP Network Probe.ro PerfCounter32 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.6 |
f3SyncJPTPNetworkProbeStatsLostSyncMsgsNumber of PTP Sync messages counted as lost at
the PTP Network Probe.ro PerfCounter32 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.7 |
f3SyncJPTPNetworkProbeStatsLostDelayRspMsgsNumber of PTP Delay Response messages counted as lost at
the PTP Network Probe.ro PerfCounter32 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.8 |
f3SyncJPTPNetworkProbeStatsMinMeanPathDelayMinimum Mean Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.9 |
f3SyncJPTPNetworkProbeStatsMaxMeanPathDelayMaximum Mean Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.10 |
f3SyncJPTPNetworkProbeStatsAvgMeanPathDelayAverage Mean Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.11 |
f3SyncJPTPNetworkProbeStatsMinSyncPathDelayMinimum Path Delay in nanoseconds of Sync messages computed
at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.12 |
f3SyncJPTPNetworkProbeStatsMaxSyncPathDelayMaximum Path Delay in nanoseconds of Sync messages computed
at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.13 |
f3SyncJPTPNetworkProbeStatsAvgSyncPathDelayAverage Path Delay in nanoseconds of Sync messages computed
at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.14 |
f3SyncJPTPNetworkProbeStatsAvgResPDVFwdAverage Residual Packet Delay Variation in nanoseconds in the
forward direction.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.15 |
f3SyncJPTPNetworkProbeStatsResPDVFwdLowTotal number of Low Range Residual Packet Delay Variation
results in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.16 |
f3SyncJPTPNetworkProbeStatsResPDVFwdMediumTotal number of Medium Range Residual Packet Delay Variation
results in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.17 |
f3SyncJPTPNetworkProbeStatsResPDVFwdHighTotal number of High Range Residual Packet Delay Variation
results in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.18 |
f3SyncJPTPNetworkProbeStatsResPDVFwdTotalTotal number of Residual Packet Delay Variation results
in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.19 |
f3SyncJPTPNetworkProbeStatsFwdScore5Total time the network usability score is 5 in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.20 |
f3SyncJPTPNetworkProbeStatsFwdScore4Total time the network usability score is 4 in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.21 |
f3SyncJPTPNetworkProbeStatsFwdScore3Total time the network usability score is 3 in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.22 |
f3SyncJPTPNetworkProbeStatsAvgResPDVRevAverage Residual Packet Delay Variation in nanoseconds in the
reverse direction.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.23 |
f3SyncJPTPNetworkProbeStatsResPDVRevLowTotal number of Low Range Residual Packet Delay Variation
results in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.24 |
f3SyncJPTPNetworkProbeStatsResPDVRevMediumTotal number of Medium Range Residual Packet Delay Variation
results in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.25 |
f3SyncJPTPNetworkProbeStatsResPDVRevHighTotal number of High Range Residual Packet Delay Variation
results in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.26 |
f3SyncJPTPNetworkProbeStatsResPDVRevTotalTotal number of Residual Packet Delay Variation results
in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.27 |
f3SyncJPTPNetworkProbeStatsRevScore5Total time the network usability score is 5 in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.28 |
f3SyncJPTPNetworkProbeStatsRevScore4Total time the network usability score is 4 in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.29 |
f3SyncJPTPNetworkProbeStatsRevScore3Total time the network usability score is 3 in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.30 |
f3SyncJPTPNetworkProbeStatsMinRPDVFwdMinimum Residual PDV in the forward direction.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.31 |
f3SyncJPTPNetworkProbeStatsMinRPDVRevMinimum Residual PDV in the reverse direction.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.32 |
f3SyncJPTPNetworkProbeStatsMinPathAsymmetryThe min path asymmetry for this entry.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.33 |
f3SyncJPTPNetworkProbeStatsMaxPathAsymmetryThe max path asymmetry for this entry.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.34 |
f3SyncJPTPNetworkProbeStatsAvgPathAsymmetryThe average path asymmetry for this entry.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.35 |
f3SyncJPTPNetworkProbeStatsPathLossSecondsFwdThe path loss seconds forwarded for this entry.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.36 |
f3SyncJPTPNetworkProbeStatsPathLossSecondsRevThe path loss seconds reverted for this entry.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.1.1.37 |
f3SyncJPTPNetworkProbeStatsMinDelayReqPathDelayMinimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.38 |
f3SyncJPTPNetworkProbeStatsMaxDelayReqPathDelayMaximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.39 |
f3SyncJPTPNetworkProbeStatsAvgDelayReqPathDelayAverage Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.1.1.40 |
f3SyncJPTPNetworkProbeHistoryTableA collection of SyncJack PTP Network Probe statistics.
These reflect the history data. SEQUENCE OF F3SyncJPTPNetworkProbeHistoryEntry .1.3.6.1.4.1.2544.1.12.22.2.2 |
f3SyncJPTPNetworkProbeHistoryEntryA conceptual row in the f3SyncJPTPNetworkProbeHistoryTable.
Entries exist in this table for each PTP Network Probe. F3SyncJPTPNetworkProbeHistoryEntry .1.3.6.1.4.1.2544.1.12.22.2.2.1 |
f3SyncJPTPNetworkProbeHistoryIndexAn arbitrary integer index value used to uniquely identify
this SyncJack PTP Network Probe PM history entry. Integer32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.1 |
f3SyncJPTPNetworkProbeHistoryTimeIndicates the time of history bin creation.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.2.2.1.2 |
f3SyncJPTPNetworkProbeHistoryValidIndicates the validity of the bin.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.2.2.1.3 |
f3SyncJPTPNetworkProbeHistoryActionAllows the Manager to clear the bin.rw CmPmBinAction (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.4 |
f3SyncJPTPNetworkProbeHistorySyncMsgsRxNumber of PTP Sync messages received at the PTP Network Probe.ro PerfCounter32 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.5 |
f3SyncJPTPNetworkProbeHistoryDelayRspMsgsRxNumber of PTP Delay Response messages received at
the PTP Network Probe.ro PerfCounter32 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.6 |
f3SyncJPTPNetworkProbeHistoryLostSyncMsgsNumber of PTP Sync messages counted as lost at
the PTP Network Probe.ro PerfCounter32 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.7 |
f3SyncJPTPNetworkProbeHistoryLostDelayRspMsgsNumber of PTP Delay Response messages counted as lost at
the PTP Network Probe.ro PerfCounter32 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.8 |
f3SyncJPTPNetworkProbeHistoryMinMeanPathDelayMinimum Mean Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.9 |
f3SyncJPTPNetworkProbeHistoryMaxMeanPathDelayMaximum Mean Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.10 |
f3SyncJPTPNetworkProbeHistoryAvgMeanPathDelayAverage Mean Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.11 |
f3SyncJPTPNetworkProbeHistoryMinSyncPathDelayMinimum Path Delay in nanoseconds of Sync messages computed
at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.12 |
f3SyncJPTPNetworkProbeHistoryMaxSyncPathDelayMaximum Path Delay in nanoseconds of Sync messages computed
at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.13 |
f3SyncJPTPNetworkProbeHistoryAvgSyncPathDelayAverage Path Delay in nanoseconds of Sync messages computed
at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.14 |
f3SyncJPTPNetworkProbeHistoryAvgResPDVFwdAverage Residual Packet Delay Variation in nanoseconds in the
forward direction.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.15 |
f3SyncJPTPNetworkProbeHistoryResPDVFwdLowTotal number of Low Range Residual Packet Delay Variation
results in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.16 |
f3SyncJPTPNetworkProbeHistoryResPDVFwdMediumTotal number of Medium Range Residual Packet Delay Variation
results in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.17 |
f3SyncJPTPNetworkProbeHistoryResPDVFwdHighTotal number of High Range Residual Packet Delay Variation
results in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.18 |
f3SyncJPTPNetworkProbeHistoryResPDVFwdTotalTotal number of Residual Packet Delay Variation results
in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.19 |
f3SyncJPTPNetworkProbeHistoryFwdScore5Total time the network usability score is 5 in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.20 |
f3SyncJPTPNetworkProbeHistoryFwdScore4Total time the network usability score is 4 in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.21 |
f3SyncJPTPNetworkProbeHistoryFwdScore3Total time the network usability score is 3 in the forward direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.22 |
f3SyncJPTPNetworkProbeHistoryAvgResPDVRevAverage Residual Packet Delay Variation in nanoseconds in the
reverse direction.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.23 |
f3SyncJPTPNetworkProbeHistoryResPDVRevLowTotal number of Low Range Residual Packet Delay Variation
results in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.24 |
f3SyncJPTPNetworkProbeHistoryResPDVRevMediumTotal number of Medium Range Residual Packet Delay Variation
results in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.25 |
f3SyncJPTPNetworkProbeHistoryResPDVRevHighTotal number of High Range Residual Packet Delay Variation
results in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.26 |
f3SyncJPTPNetworkProbeHistoryResPDVRevTotalTotal number of Residual Packet Delay Variation results
in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.27 |
f3SyncJPTPNetworkProbeHistoryRevScore5Total time the network usability score is 5 in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.28 |
f3SyncJPTPNetworkProbeHistoryRevScore4Total time the network usability score is 4 in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.29 |
f3SyncJPTPNetworkProbeHistoryRevScore3Total time the network usability score is 3 in the reverse direction.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.30 |
f3SyncJPTPNetworkProbeHistoryMinRPDVFwdMinimum Residual PDV in the forward direction.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.31 |
f3SyncJPTPNetworkProbeHistoryMinRPDVRevMinimum Residual PDV in the reverse direction.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.32 |
f3SyncJPTPNetworkProbeHistoryMinPathAsymmetryThe min path asymmetry for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.33 |
f3SyncJPTPNetworkProbeHistoryMaxPathAsymmetryThe max path asymmetry for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.34 |
f3SyncJPTPNetworkProbeHistoryAvgPathAsymmetryThe average path asymmetry for this entry.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.2.1.35 |
f3SyncJPTPNetworkProbeHistoryMinDelayReqPathDelayMinimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.36 |
f3SyncJPTPNetworkProbeHistoryMaxDelayReqPathDelayMaximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.37 |
f3SyncJPTPNetworkProbeHistoryAvgDelayReqPathDelayAverage Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.ro ScaledNanoseconds (F3-PTP-MIB) .1.3.6.1.4.1.2544.1.12.22.2.2.1.38 |
f3SyncJPTPNetworkProbeThresholdTableA table of entries that allow support the PTP Network Probe
Thresholds. SEQUENCE OF F3SyncJPTPNetworkProbeThresholdEntry .1.3.6.1.4.1.2544.1.12.22.2.3 |
f3SyncJPTPNetworkProbeThresholdEntryA conceptual row in the f3SyncJPTPNetworkProbeThresholdTable. F3SyncJPTPNetworkProbeThresholdEntry .1.3.6.1.4.1.2544.1.12.22.2.3.1 |
f3SyncJPTPNetworkProbeThresholdIndexAn index that uniquely identifies an entry in the
f3SyncJPTPNetworkProbeThresholdTable. Integer32 .1.3.6.1.4.1.2544.1.12.22.2.3.1.1 |
f3SyncJPTPNetworkProbeThresholdIntervalThe interval over which monitored value is
sampled and compared with the specified threshold.ro CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.3.1.2 |
f3SyncJPTPNetworkProbeThresholdVariableThe object identifier of the particular variable to be
sampled.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.22.2.3.1.3 |
f3SyncJPTPNetworkProbeThresholdValueLoLower 32 bits of the threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.3.1.4 |
f3SyncJPTPNetworkProbeThresholdValueHiHigher 32 bits of the threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.22.2.3.1.5 |
f3SyncJPTPNetworkProbeThresholdMonValueMonitored value corresponding to f3SyncJPTPNetworkProbeThresholdVariable.ro PerfCounter64 (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.22.2.3.1.6 |
f3SyncJNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.22.3 |
f3SyncJPTPNetworkProbeThresholdCrossingAlertThis trap is sent each time a threshold on a PM condition
on an PTP Network Probe is crossed. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.12.22.3.1 |
f3SyncJClockProbeStatusChangeTrapThis trap is sent each time any status changes happen
on a SyncJack Clock Probe. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.12.22.3.2 |
f3SyncJPTPClockProbeStatusChangeTrapThis trap is sent each time any status changes happen
on a SyncJack PTP Clock Probe. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.12.22.3.3 |
f3SyncJPTPNetworkProbeStatusChangeTrapThis trap is sent each time any status changes happen
on a SyncJack PTP Network Probe. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.12.22.3.4 |
f3SyncJConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.22.4 |
f3SyncJCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.22.4.1 |
f3SyncJGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.22.4.2 |