EFDMIM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for EFDMIM-MIB.
49
Objects
Active
Status
1
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
cabletron OBJECT IDENTIFIER .1.3.6.1.4.1.52 |
commsDevice OBJECT IDENTIFIER .1.3.6.1.4.1.52.1 |
subsystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6 |
nb55 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.4 |
rev1 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.4.1 |
efdmimRingTableAn ordered list of fddi nodes found on the Fddi Ring. SEQUENCE OF EfdmimRingEntry .1.3.6.1.4.1.52.1.6.4.1.1 |
efdmimRingEntryAn fddi ring entry containing information common to all stations in a token path. All FDDI ring Entry elements have an instance id made up of an index followed by a canonical FDDI station address. The indexes are ordered sequentially 1 to n, and the corresponding FDDI addresses are ordered in reverse token flow. Consider the following example: --->---[1] 00-00-1D-00-00-04 | | (arrows show token flow) | V | [3] 00-00-1D-00-00-01 | | | V | [2] 00-00-1D-00-00-03 | | ----<----------/ A get_next request with instance id = 0 will return 1.0.0.1D.0.0.4 A get_next request with instance id= 1.0.0.1D.0.0.4 will return 2.0.0.1D.0.0.3 A get_next request with instance id= 2.0.0.1D.0.0.1 will return 3.0.0.1D.0.0.1 EfdmimRingEntry .1.3.6.1.4.1.52.1.6.4.1.1.1 |
efdmimRingUpstreamMacThis is the 6 octet canonical representation of the upstream neighbor's address. The upstream neighbor is the last MAC to receive the token before this MAC. Please Note: SMT Rev 6.2 and under specify the unknown address as 00-00-00-00-00-00. SMT revisions after 6.2 specify the unknown address as 00-00-F8-00-00-00.ro OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.1.1.1 |
efdmimRingNodeClassReports if the node is a station or a concentrator. Legal values are: station (0) concentrator (1)ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.1.1.2 |
efdmimRingMacsThe number of MACs on this FDDI node.ro Counter .1.3.6.1.4.1.52.1.6.4.1.1.1.3 |
efdmimRingNonMasterPhysThe sum of the all A-Ports, B-Ports, and S-Ports on this node.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.1.1.4 |
efdmimRingMasterPhysThe number of master ports on this node. Results will range from 0 to 255.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.1.1.5 |
efdmimRingTopologyA bit-mapped representation of the current state of the node. if this state: Add 2**n where n= Wrapped Node: 0 Unattached Concentrator: 1 A-A twisted ring: 2 B-B twisted ring: 3 Rooted Station: 4 SRF supported 5 Wrapped Node: set when the node's cf-state is Wrap-A, Wrap-B, Wrap-S, or Wrap- AB. Unattached Concentrator: set when a concentrator has no active A, B, or S ports. A-A Twisted ring: A twisted ring has occurred because this node's A port has been connected to another port. B-B Twisted ring: A twisted ring has occurred because this node's B port has been connected to another B port. Rooted Station: This is a station who's A, B and S ports are NOT active in tree mode. If any A, B, or S ports are active in TREE mode, this is FALSE. SRF supported: This node adheres to the status reporting frame protocol.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.1.1.6 |
efdmimRingDuplicateA bit-mapped representation of duplicate address information. if this state: Add 2**n where n= My Duplicate: 0 UNA Duplicate: 1 My Duplicate: This node has determined that it's MAC address is the same as the MAC address for another node on the ring. UNA Duplicate: The upstream neighbor of this node has determined that it's MAC address is the same as the MAC address for another node on the ring.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.1.1.7 |
efdmimRingMacAddressA canonical representation of the MAC address.ro OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.1.1.8 |
efdmimBdgPortTableThis is a table of items that relate to bridge ports. Note there are 2 bridge (packet communication) ports on the EFDMIM, the ethernet port, and the FDDI port. SEQUENCE OF EfdmimBdgPortEntry .1.3.6.1.4.1.52.1.6.4.1.2 |
efdmimBdgPortEntryThis is an individual entry in the bridge port table. Note that each entry will contain an instance id of 1 to represent the Ethernet port, and 2 to represent the FDDI port. EfdmimBdgPortEntry .1.3.6.1.4.1.52.1.6.4.1.2.1 |
efdmimBdgPortStateThis object is returned only if spanning tree is enabled on the bridge. It returns a text string representing the current state of the port: 'Disabled', 'Listening', 'Learning', 'Forwarding', or 'Blocking'.ro OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.2.1.1 |
efdmimBdgPortReceivedPktsThe number of frames received by the bridge through this port.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.2.1.2 |
efdmimBdgPortFilteredPktsThe number of frames filtered by the bridge at this port.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.2.1.3 |
efdmimBdgPortForwardedPktsThe number of frames forwarded by the bridge through this port.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.2.1.4 |
efdmimBdgPortTransmittedPktsThe number of frames transmitted on this port.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.2.1.5 |
efdmimBdgPortErrorPktsThe number of frame errors detected on this port.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.2.1.6 |
efdmimPhyTableThis is a table of data that pertains only to phys on the efdmim. SEQUENCE OF EfdmimPhyEntry .1.3.6.1.4.1.52.1.6.4.1.3 |
efdmimPhyEntryThis is a specific entry in the efdmimPhyTable that represents a specific attribute of a phy. Note that phy entries that refer to PHY-A will use an instance identifier of 1 and phy entries that refer to PHY-B will use an instance identifier of 2. EfdmimPhyEntry .1.3.6.1.4.1.52.1.6.4.1.3.1 |
efdmimPhyWitholdDescribes if the phy is enabled but not allowed to be used due to a topology problem. Legal values are: none (0) - PHY can be used withold-because-M-M (1) - Don't use PHY withold-because-Other (2) - Don't use PHYro INTEGER .1.3.6.1.4.1.52.1.6.4.1.3.1.1 |
efdmimDeviceStatusThis is an Ascii string representation of the station's status. Responses include 'ON-LINE', 'STAND BY', and 'DISABLED'.ro OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.20 |
efdmimDeviceBdgNameThis is a user-defined name for the bridge. The name may contain up to 32 characters.rw OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.21 |
efdmimDeviceTypeThis represents the type of bridge this is. The EFDMIM will always respond with 'EFDMIM'.ro OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.22 |
efdmimDeviceVersionA text string representing the firmware version installed in the bridge.ro OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.23 |
efdmimDeviceLocationA user defined name used to represent the location of the bridge.rw OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.24 |
efdmimDeviceUptimeThe number of seconds that have elapsed since the bridge reset or initialized.ro Counter .1.3.6.1.4.1.52.1.6.4.1.25 |
efdmimDeviceDisableBridgeStates whether or not the bridge is disabled. To disable the bridge, set this value to 1. To enable the bridge, set this value to 0.rw Enumeration .1.3.6.1.4.1.52.1.6.4.1.26 |
efdmimDeviceResetCountersThis forces the EFDMIM to reset it's counters. Note: The efdmim will reset all it's counters except for the following: FDDI Frame count FDDI Error count FDDI Lost count FDDI Ring Oscillations.rw Enumeration .1.3.6.1.4.1.52.1.6.4.1.27 |
efdmimDeviceSwitchSettingsThis describes the dip and jumper settings physically set on the efdmim board. Switch multiply 2**n Root 0 Forward Broadcasts 1 Spanning Tree 2 BPDU Type 3 Bypass 4 Ring Select 5 Diagnostics 6 Mode 7 Root: If 0, then spanning tree root is selected. If 1, then spanning tree root is NOT selected. Forward Broadcasts: If 0, then all broadcast packets are forwarded. If 1, then all broadcasts packets are filtered. Spanning Tree: If 0, then spanning tree facilities are enabled. If 1, then spanning tree facilities are disabled. BPDU Type: If 0, then spanning tree uses the IEE bridge packet protocol. If 1, then spanning tree uses the DEC bridge packet protocol. Bypass: If 0, then there is an optical bypass physically attached to the bridge. If 1, then there is not an optical bypass attached to the bridge. Ring Select: If 0, the bridge should attach to the primary FDDI ring (Through-A mode). If 1, the bridge should attach to the secondary FDDI ring (Through-B mode). Diagnostics: If 0, the bridge is in it's normal mode of operation. If 1, then the bridge is running self diagnostics. Mode: If 0, the bridge is an encapsulating bridge (talks from ethernet to ethernet using FDDI only as a backbone). If 1, the bridge is a translation bridge ( talks ethernet to ethernet, and ethernet to FDDI).ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.28 |
efdmimDeviceReceivedPktsThe aggregate number of frames received by the bridge through it's ports.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.29 |
efdmimDeviceFilteredPktsThe aggregate number of frames received and filtered by the bridge through it's ports.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.30 |
efdmimDeviceForwardedPktsThe aggregate number of frames received and forwarded by the bridge through it's ports.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.31 |
efdmimDeviceTransmittedPktsThe aggregate number of frames transmitted on it's ports.ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.32 |
efdmimDeviceErrorPktsThe aggregate number of frame errors detected on it's portsro INTEGER .1.3.6.1.4.1.52.1.6.4.1.33 |
efdmimCfmStateThe efdmim's current CFM state. Legal values are: isolated (0) wrap-A (1) wrap-B (2) wrap-AB (3) through-A (4) through-B (5) through-AB (6) wrap-S (7)ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.34 |
efdmimBypassAttachedDoes the station has an optical bypass switch?ro Enumeration .1.3.6.1.4.1.52.1.6.4.1.35 |
efdmimOscillationsThe number of times the claim/beacon process has completed since power-up. Note: This does not get reset when a reset counter command is issued.ro Counter .1.3.6.1.4.1.52.1.6.4.1.36 |
efdmimRingUpTimeThe elapsed time in seconds since the most recent ring oscillation. Note: This returns 0 whenever the FDDI ring is down.ro Counter .1.3.6.1.4.1.52.1.6.4.1.37 |
efdmimDownstreamMacThe address of this station's downstream MAC in canonical format.ro OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.38 |
efdmimBypassStuckTrue if the optical bypass switch is stuck False if everything is ok.ro Enumeration .1.3.6.1.4.1.52.1.6.4.1.39 |
efdmimModeEncapsulation bridges talk using the FDDI ring as a back-bone only. Translation bridges translates the packets into FDDI format.ro Enumeration .1.3.6.1.4.1.52.1.6.4.1.40 |
efdmimRmtStateThis represents what state the RMT state machine is in. Legal values are: isolated (0) non-Op (1) ring-Op (2) detect (3) non-Op-Dup (4) ring-Op-Dup (5) directed (6) trace (7)ro INTEGER .1.3.6.1.4.1.52.1.6.4.1.41 |
efdmimDeviceBridgeAddrThis returns the Bridge address in canonical format.ro OCTET STRING .1.3.6.1.4.1.52.1.6.4.1.42 |