Home/Catalog/Dlink-GREEN-MIB

Dlink-GREEN-MIB

The private MIB module definition for Green Ethernet Energy Detect feature.
Main OID:
rlGreenEth.1.3.6.1.4.1.89.134
15
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

15 total
Object Name
rlGreenEthThe private MIB module definition for Green Ethernet Energy Detect feature.
MODULE-IDENTITY
.1.3.6.1.4.1.89.134
rlGreenEthEnergyDetectEnableThis scalar defines Green Ethernet Enrgy-Detect Globalyrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.89.134.1
rlGreenEthShortReachEnableThis scalar defines Green Ethernet Short-Reach Globalyrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.89.134.2
rlGreenEthCurrentEnergyConsumptionThis scalar define Green Ethernet all modes current Energy consumption per system in mWatt in order to calculate current energy consumption in percent proportional to Consumption without Green Ethernet feature please use the following formula: (rlGreenEthCurrentEnergyConsumption/rlGreenEthCurrentMaxEnergyConsumption)*100ro
Unsigned32 UNITS "mWatt"
.1.3.6.1.4.1.89.134.3
rlGreenEthCurrentMaxEnergyConsumptionThis scalar define Green Ethernet current maximum consumption Energy consumption per system in mWatt, as it was without Green Ethernet feature.ro
Unsigned32 UNITS "mWatt"
.1.3.6.1.4.1.89.134.4
rlGreenEthCumulativePowerSaveMeterThis scalar define Green Ethernet cumulative power save per system in Watt*Hourro
Unsigned32 UNITS "Watt*Hour"
.1.3.6.1.4.1.89.134.5
rlGreenEthShortReachThresholdThe usage threshold expressed in meter for determinate the cable length for Short-Reachrw
Unsigned32
.1.3.6.1.4.1.89.134.6
rlGreenEthCumulativePowerSaveMeterResetThe rlGreenEthCumulativePowerSaveMeterReset indicates that rlGreenEthCumulativePowerSaveMeter should be set to ziro. This object behaviors as write-only than reading this object will always return 'false'.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.89.134.7
rlGreenEthPortTableA table of green state of ports
SEQUENCE OF RlGreenEthPortEntry
.1.3.6.1.4.1.89.134.8
rlGreenEthPortEntryAn entry of green state of port
RlGreenEthPortEntry
.1.3.6.1.4.1.89.134.8.1
rlGreenEthPortSavingTypeValueGreen saving types
RlGreenSavingType
.1.3.6.1.4.1.89.134.8.1.1
rlGreenEthPortAdminStateActive\non Activerw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.89.134.8.1.2
rlGreenEthPortOperStateActive\non Activero
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.89.134.8.1.3
rlGreenEthPortNonOperReasonReason why saving mode is not activatedro
NonOperReasonType
.1.3.6.1.4.1.89.134.8.1.4
rlGreenEthForceShortReachIfIndexListThe ports that forced enable the Green Ethernet Short Reach configuration not considering VCT results.rw
PortList (Q-BRIDGE-MIB)
.1.3.6.1.4.1.89.134.9
Dlink-GREEN-MIB - SNMP MIB Reference | MIBs Explorer