Dell-rldot1q-MIB
AI MIB Summary
The Dell-rldot1q-MIB module enables monitoring and management of IEEE 802.1Q VLAN configuration parameters, including port-based VLAN membership, VLAN IDs, and PVID assignments, on Dell networking hardware. It provides access to specific interface statistics and VLAN table entries required for troubleshooting Layer 2 segmentation and verifying VLAN operational states.
<description>
Main OID:
rlq-bridge-mib.1.3.6.1.4.1.89.57.8
14
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
rlq-bridge-mib<description> MODULE-IDENTITY .1.3.6.1.4.1.89.57.8 |
rldot1q OBJECT IDENTIFIER .1.3.6.1.4.1.89.57.8 |
rldot1qStaticUnicastTableAn augmentation to dot1qStaticUnicastTable SEQUENCE OF Rldot1qStaticUnicastEntry .1.3.6.1.4.1.89.57.8.1 |
rldot1qStaticUnicastEntryAn augmentation to dot1qStaticUnicastEntry Rldot1qStaticUnicastEntry .1.3.6.1.4.1.89.57.8.1.1 |
rldot1qStaticUnicastAddressOwnerThe learned status of this entry:
static(1) - address has added by user.
learned(2)- address has added by device.rw Enumeration .1.3.6.1.4.1.89.57.8.1.1.1 |
rldot1qTpFdbTableAn augmentation to dot1qTpFdbTable SEQUENCE OF Rldot1qTpFdbEntry .1.3.6.1.4.1.89.57.8.2 |
rldot1qTpFdbEntryAn augmentation to dot1qTpFdbEntry Rldot1qTpFdbEntry .1.3.6.1.4.1.89.57.8.2.1 |
rldot1qTpFdbSubStatusThe sub status of this entry. The meanings of the values
are:
none(1) -
non of the following.
dynamic-static(2) -
the value of the corresponding instance of dot1qTpFdbPort was
learned dynamically in SW but kept as static address in HW.ro Enumeration .1.3.6.1.4.1.89.57.8.2.1.1 |
rldot1qTpFdbCountTableCounters for FDB table. Per VLAN, port and type. SEQUENCE OF Rldot1qTpFdbCountEntry .1.3.6.1.4.1.89.57.8.3 |
rldot1qTpFdbCountEntryCount the number of MAC address for a specific VLAN, port and type. Rldot1qTpFdbCountEntry .1.3.6.1.4.1.89.57.8.3.1 |
rldot1qTpFdbCountVlanTagVlan Tag. Zero means all vlansro INTEGER .1.3.6.1.4.1.89.57.8.3.1.1 |
rldot1qTpFdbCountPortPort. Zero means all portsro Integer32 .1.3.6.1.4.1.89.57.8.3.1.2 |
rldot1qTpFdbCountTypeType of the address:
TODOro Enumeration .1.3.6.1.4.1.89.57.8.3.1.3 |
rldot1qTpFdbCountCountNumber of address per selected vlan, port and type.ro INTEGER .1.3.6.1.4.1.89.57.8.3.1.4 |