Dell-TRUNK-MIB
The private MIB module definition for trunk support in Dell devices.
Main OID:
rlDot3adAgg.1.3.6.1.4.1.89.65
39
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
39 total| Object Name |
|---|
rlDot3adAggThe private MIB module definition for trunk support in Dell devices. MODULE-IDENTITY .1.3.6.1.4.1.89.65 |
Dell-MIBThe private MIB module definition for trunk support in Dell devices. Unknown .1.3.6.1.4.1.89.65 |
rlDot3adAggMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.65.1 |
rlDot3adAggBalanceTableAn entry of this table specifies a balancing criterion used
for the corresponding dot3adAggIndex. SEQUENCE OF RlDot3adAggBalanceEntry .1.3.6.1.4.1.89.65.2 |
rlDot3adAggBalanceEntryA list of information for each dot3adAggIndex. RlDot3adAggBalanceEntry .1.3.6.1.4.1.89.65.2.1 |
rlDot3adAggBalanceForwardTypeA Forwarding type: Bridging or Routing.ro Enumeration .1.3.6.1.4.1.89.65.2.1.1 |
rlDot3adAggBalanceLayerA Network Layer Number, may have the following values: 2, 3 or 4.
The default value is:
Bridging: 2
Routing: 3.rw INTEGER .1.3.6.1.4.1.89.65.2.1.2 |
rlDot3adAggBalanceUsedAddressesSpecifies the Network Layer addresses used for Balancing of
unicast frames.
The function sets the criterion (by layer and used address in it).rw Enumeration .1.3.6.1.4.1.89.65.2.1.3 |
rlDot3adAggBalanceBroadcastTypeSpecifies a balancing criterion used for L2 broadcast and unknown
frames:
common:
a link allocated for broadcast and unknown frames is used
for unicast frames too
dedicated:
a link allocated for broadcast and unknown frames is not used
for unicast framesrw Enumeration .1.3.6.1.4.1.89.65.2.1.4 |
rlDot3adAggNumOfTrunksThe number of trunks supported by the device.ro INTEGER .1.3.6.1.4.1.89.65.3 |
rlDot3adAggMaxPortsInTrunksThe maximun number of ports in a trunk.ro INTEGER .1.3.6.1.4.1.89.65.4 |
rlDot3adAggTrunkCreationSupportSpecifies if there is support to rldot3adAggCreationTable,
and the type of the support:
supportedTrunkOrLacp - ports that are members in some trunk
are belongs to it by manual configuration or by lacp,
but not togther.
notSupported - there is not support to rldot3adAggCreationTable.rw Enumeration .1.3.6.1.4.1.89.65.5 |
rlDot3adAggCreationTableAn entry of this table is for creation of an aggregator
for the corresponding dot3adAggIndex, when the value of the
rlDot3adAggCreationSupport is diffrent from notSupported. SEQUENCE OF RlDot3adAggCreationEntry .1.3.6.1.4.1.89.65.6 |
rlDot3adAggCreationEntryAn information for each dot3adAggIndex. RlDot3adAggCreationEntry .1.3.6.1.4.1.89.65.6.1 |
rlDot3adAggCreationTrunkThe aggregator can aggregate ports in manual configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.65.6.1.1 |
rlDot3adAggCreationLacpThe aggregator can aggregate ports by lacp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.65.6.1.2 |
rlDot3adAggLoadBalancingPerTrunkSpecifies if load balancing is defined per trunk
or per device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.65.7 |
rlDot3adAggPortLacpTableAn entry of this table specifies lacp protocol state and
statistics for the corresponding dot3adAggPortIndex. SEQUENCE OF RlDot3adAggPortLacpEntry .1.3.6.1.4.1.89.65.8 |
rlDot3adAggPortLacpEntryA list of information for each dot3adAggPortIndex. RlDot3adAggPortLacpEntry .1.3.6.1.4.1.89.65.8.1 |
rlDot3adAggPortLacpPdusRxThe number of valid LACPDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.89.65.8.1.1 |
rlDot3adAggPortLacpPDUsTxThe number of LACPDUs transmitted on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.89.65.8.1.2 |
rlDot3adAggPortLacpRxStateThis attribute holds the value 'current' if the Receive
state machine for the Aggregation Port is in the
CURRENT state, 'expired' if the Receive state machine
is in the EXPIRED state, 'defaulted' if the Receive state
machine is in the DEFAULTED state, 'initialize' if the
Receive state machine is in the INITIALIZE state,
'portDisabled' if the Receive state machine is in the
PORT_DISABLED state, or 'lacpDisabled' if the Receive state
machine is in the LACP_DISABLED state.
This value is read-only.ro Enumeration .1.3.6.1.4.1.89.65.8.1.3 |
rlDot3adAggPortLacpMuxStateThis attribute holds the value 'detached' if the Mux
state machine for the Aggregation Port is
in the DETACHED state, 'waiting' if the Mux state machine
is in the WAITING state, 'attached' if the Mux state
machine for the Aggregation Port is in the ATTACHED
state, 'collecting' if the Mux state machine for the
Aggregation Port is in the COLLECTING state, 'distributing'
if the Mux state machine for the Aggregation Port is
in the DISTRIBUTING state, and 'collecting_ distributing'
if the Mux state machine for the Aggregation Port is in
the COLLECTING_DISTRIBUTING state.
This value is read-only.ro Enumeration .1.3.6.1.4.1.89.65.8.1.4 |
rlDot3adAggPortLacpPeriodicStateThis attribute holds the value 'noPeriodic' if the Periodic
state machine for the Aggregation Port is
in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine
is in the FAST_PERIODIC state, 'slowPeriodic' if the Mux state
machine for the Aggregation Port is in the SLOW_PERIODIC
state, or 'periodicTx' if the Periodic state machine
for the Aggregation Port is in the PERIODIC_TX state.
This value is read-only.ro Enumeration .1.3.6.1.4.1.89.65.8.1.5 |
rlDot3adAggPortLacpSelectedThis attribute holds the value 'unselected' if the Selected variable
for the Aggregation Port is set to UNSELECTED, 'selected' if the
Selected variable for the Aggregation Port is set to SELECTED,
or 'waiting' if the Selected variable for the Aggregation Port
is set to WAITING.
This value is read-only.ro Enumeration .1.3.6.1.4.1.89.65.8.1.6 |
rlDot3adAggPortLacpReadyA read-only Boolean value indicating whether the
Aggregation Port is in the WAITING state in the Mux state machine
and its wait_while_timer has expired ('TRUE').
otherwise, its valus is 'FALSE'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.65.8.1.7 |
rlDot3adAggPortLacpPortMovedA read-only Boolean value indicating whether the
Partner_Oper_System or Partner_Oper_Port_Number in use by the
Aggregation Port has been changed in an incoming LACPDU ('TRUE').
otherwise, its valus is 'FALSE'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.65.8.1.8 |
rlDot3adAggPortLacpNNTA read-only Boolean value indicating whether there is a new protocol
information that should be transmitted on the link, or that the Partner
needs to be reminded of the old information.
otherwise, its valus is 'FALSE'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.65.8.1.9 |
rlDot3adAggPortLacpPeriodicTxTimerThe amount of time in seconds remaining before the Periodeic Tx timer
will expire.
This value is read-only.ro INTEGER .1.3.6.1.4.1.89.65.8.1.10 |
rlDot3adAggPortLacpCurrentWhileTimerThe amount of time in seconds remaining before the Current While timer
will expire.
This value is read-only.ro INTEGER .1.3.6.1.4.1.89.65.8.1.11 |
rlDot3adAggPortLacpWaitWhileTimerThe amount of time in seconds remaining before the Wait While timer
will expire.
This value is read-only.ro INTEGER .1.3.6.1.4.1.89.65.8.1.12 |
rlDot3adAggLacpMembershipRestrictionsSupportSpecifies if there is support to
rlDot3adAggLacpMembershipRestrictionsTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.65.9 |
rlDot3adAggLacpMembershipRestrictionsTableAn entry of this table specifies membership restrictions
for ports that lacp is enbaled on them, and try to attach to
the corresponding dot3adAggIndex. SEQUENCE OF RlDot3adAggLacpMembershipRestrictionsEntry .1.3.6.1.4.1.89.65.10 |
rlDot3adAggLacpMembershipRestrictionsEntryA list of information for each dot3adAggIndex. RlDot3adAggLacpMembershipRestrictionsEntry .1.3.6.1.4.1.89.65.10.1 |
rlDot3adAggLacpMembershipRestrictionsPartnerAdminKeyThis variable specifies the administrative key
of the remote LACP aggregator.
A value of 0 is returned if the value of the variable
hasn't been set.rw Unsigned32 (0.. 65535) .1.3.6.1.4.1.89.65.10.1.1 |
rlDot3adAggLacpMembershipRestrictionsSpeedAdminModeThis variable specifies the required speed of the LACP aggregator
in bits per second.
A value of 10 is returned for 10G.
A value of 0 is returned if the value of the variable
hasn't been set.rw Unsigned32 .1.3.6.1.4.1.89.65.10.1.2 |
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemIdThis variable specifies the administrative MAC Address
of the remote LACP aggregator.
A null mac address is returned if the value of the variable
hasn't been set.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.65.10.1.3 |
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriorityThis variable specifies the administrative System Priority
of the remote LACP aggregator.
A value of 0 is returned if the value of the variable
hasn't been set.rw Unsigned32 (0.. 65535) .1.3.6.1.4.1.89.65.10.1.4 |
rlDot3adAggLacpMembershipRestrictionsIndividualAggregatorThis variable specifies if the lacp aggregator represents an
Aggregate ('FALSE') or an Individual link ('TRUE').rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.65.10.1.5 |