IEEE8023-LAG-MIB
AI MIB Summary
The IEEE8023-LAG-MIB enables monitoring and management of IEEE 802.3ad Link Aggregation Control Protocol (LACP) groups, specifically tracking aggregate interface states, member port status, and LACP negotiation parameters across network switches and routers.
The Link Aggregation module for managing IEEE 802.3ad.
Main OID:
lagMIB.1.1.2.840.10006.300.43
74
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
lagMIBThe Link Aggregation module for managing IEEE 802.3ad. MODULE-IDENTITY .1.1.2.840.10006.300.43 |
lagMIBObjects OBJECT IDENTIFIER .1.1.2.840.10006.300.43.1 |
dot3adAgg OBJECT IDENTIFIER .1.1.2.840.10006.300.43.1.1 |
dot3adAggTableA table that contains information about every
Aggregator that is associated with this System. SEQUENCE OF Dot3adAggEntry .1.1.2.840.10006.300.43.1.1.1 |
dot3adAggEntryA list of the Aggregator parameters. This is indexed
by the ifIndex of the Aggregator. Dot3adAggEntry .1.1.2.840.10006.300.43.1.1.1.1 |
dot3adAggIndexThe unique identifier allocated to this Aggregator by the local System.
This attribute identifies an Aggregator instance among the subordinate
managed objects of the containing object. This value is read-only. InterfaceIndex (IF-MIB) .1.1.2.840.10006.300.43.1.1.1.1.1 |
dot3adAggMACAddressA 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator.ro MacAddress (SNMPv2-TC) .1.1.2.840.10006.300.43.1.1.1.1.2 |
dot3adAggActorSystemPriorityA 2-octet read-write value indicating the priority value
associated with the Actors System ID.rw INTEGER .1.1.2.840.10006.300.43.1.1.1.1.3 |
dot3adAggActorSystemIDA 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTEFrom the perspective of the Link Aggregation mechanisms described in Clause 43 [Part 3],
only a single combination of Actors System ID and System Priority are considered, and no
distinction is made between the values of these parameters for an Aggregator and the port(s) that
are associated with it; i.e., the protocol is described in terms of the operation of aggregation within
a single System. However, the managed objects provided for the Aggregator and the port both
allow management of these parameters. The result of this is to permit a single piece of equipment
to be configured by management to contain more than one System from the point of view of the
operation of Link Aggregation. This may be of particular use in the configuration of equipment
that has limited aggregation capability (see 43.6 [Part 3]).ro MacAddress (SNMPv2-TC) .1.1.2.840.10006.300.43.1.1.1.1.4 |
dot3adAggAggregateOrIndividualA read-only Boolean value indicating whether the
Aggregator represents an Aggregate (TRUE) or
an Individual link (FALSE).ro TruthValue (SNMPv2-TC) .1.1.2.840.10006.300.43.1.1.1.1.5 |
dot3adAggActorAdminKeyThe current administrative value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in 43.6.2. This is a 16-bit,
read-write value. The meaning of particular Key values
is of local significance.rw LacpKey .1.1.2.840.10006.300.43.1.1.1.1.6 |
dot3adAggActorOperKeyThe current operational value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in 43.6.2.
This is a 16-bit read-only value. The meaning of particular Key
values is of local significance.ro LacpKey .1.1.2.840.10006.300.43.1.1.1.1.7 |
dot3adAggPartnerSystemIDA 6-octet read-only MAC address value consisting
of the unique identifier for the current protocol Partner of
this Aggregator. A value of zero indicates that there is no
known Partner. If the aggregation is manually configured, this
System ID value will be a value assigned by the local System.ro MacAddress (SNMPv2-TC) .1.1.2.840.10006.300.43.1.1.1.1.8 |
dot3adAggPartnerSystemPriorityA 2-octet read-only value that indicates the priority
value associated with the Partners System ID. If the
aggregation is manually configured, this System Priority value
will be a value assigned by the local System.ro INTEGER .1.1.2.840.10006.300.43.1.1.1.1.9 |
dot3adAggPartnerOperKeyThe current operational value of the Key for the
Aggregators current protocol Partner. This is
a 16-bit read-only value. If the aggregation is manually
configured, this Key value will be a value assigned by the
local System.ro LacpKey .1.1.2.840.10006.300.43.1.1.1.1.10 |
dot3adAggCollectorMaxDelayThe value of this 16-bit read-write attribute defines
the maximum delay, in tens of microseconds, that
may be imposed by the Frame Collector between
receiving a frame from an Aggregator Parser, and
either delivering the frame to its MAC Client or discarding
the frame (see 43.2.3.1.1 [Part 3]).rw INTEGER .1.1.2.840.10006.300.43.1.1.1.1.11 |
dot3adAggPortListTableA table that contains a list of all the ports
associated with each Aggregator. SEQUENCE OF Dot3adAggPortListEntry .1.1.2.840.10006.300.43.1.1.2 |
dot3adAggPortListEntryA list of the ports associated with a given Aggregator.
This is indexed by the ifIndex of the Aggregator. Dot3adAggPortListEntry .1.1.2.840.10006.300.43.1.1.2.1 |
dot3adAggPortListPortsThe complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation.ro PortList (Q-BRIDGE-MIB) .1.1.2.840.10006.300.43.1.1.2.1.1 |
dot3adAggPort OBJECT IDENTIFIER .1.1.2.840.10006.300.43.1.2 |
dot3adAggPortTableA table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port. SEQUENCE OF Dot3adAggPortEntry .1.1.2.840.10006.300.43.1.2.1 |
dot3adAggPortEntryA list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device. Dot3adAggPortEntry .1.1.2.840.10006.300.43.1.2.1.1 |
dot3adAggPortIndexThe ifIndex of the port InterfaceIndex (IF-MIB) .1.1.2.840.10006.300.43.1.2.1.1.1 |
dot3adAggPortActorSystemPriorityA 2-octet read-write value used to define the priority
value associated with the Actors System ID.rw INTEGER .1.1.2.840.10006.300.43.1.2.1.1.2 |
dot3adAggPortActorSystemIDA 6-octet read-only MAC address value that defines
the value of the System ID for the System that contains this
Aggregation Port.ro MacAddress (SNMPv2-TC) .1.1.2.840.10006.300.43.1.2.1.1.3 |
dot3adAggPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local significance.rw LacpKey .1.1.2.840.10006.300.43.1.2.1.1.4 |
dot3adAggPortActorOperKeyThe current operational value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local significance.ro LacpKey .1.1.2.840.10006.300.43.1.2.1.1.5 |
dot3adAggPortPartnerAdminSystemPriorityA 2-octet read-write value used to define the administrative
value of priority associated with the Partners System ID. The
assigned value is used, along with the value of
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation.rw INTEGER .1.1.2.840.10006.300.43.1.2.1.1.6 |
dot3adAggPortPartnerOperSystemPriorityA 2-octet read-only value indicating the operational value
of priority associated with the Partners System ID. The
value of this attribute may contain the manually configured value
carried in aAggPortPartnerAdminSystemPriority
if there is no protocol Partner.ro INTEGER .1.1.2.840.10006.300.43.1.2.1.1.7 |
dot3adAggPortPartnerAdminSystemIDA 6-octet read-write MACAddress value representing
the administrative value of the Aggregation Ports protocol
Partners System ID. The assigned value is used, along with
the value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminKey, aAggPortPartnerAdminPort,
and aAggPortPartnerAdminPortPriority, in order to
achieve manually configured aggregation.rw MacAddress (SNMPv2-TC) .1.1.2.840.10006.300.43.1.2.1.1.8 |
dot3adAggPortPartnerOperSystemIDA 6-octet read-only MACAddress value representing
the current value of the Aggregation Ports protocol Partners
System ID. A value of zero indicates that there is no known
protocol Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminSystemID if there is no protocol Partner.ro MacAddress (SNMPv2-TC) .1.1.2.840.10006.300.43.1.2.1.1.9 |
dot3adAggPortPartnerAdminKeyThe current administrative value of the Key for the
protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation.rw LacpKey .1.1.2.840.10006.300.43.1.2.1.1.10 |
dot3adAggPortPartnerOperKeyThe current operational value of the Key for the
protocol Partner. The value of this attribute may contain
the manually configured value carried in
aAggPortPartnerAdminKey if there is no protocol Partner.
This is a 16-bit read-only value.ro LacpKey .1.1.2.840.10006.300.43.1.2.1.1.11 |
dot3adAggPortSelectedAggIDThe identifier value of the Aggregator that this Aggregation
Port has currently selected. Zero indicates that the Aggregation
Port has not selected an Aggregator, either because it is in the
process of detaching from an Aggregator or because there is no
suitable Aggregator available for it to select. This value is read-only.ro InterfaceIndex (IF-MIB) .1.1.2.840.10006.300.43.1.2.1.1.12 |
dot3adAggPortAttachedAggIDThe identifier value of the Aggregator that this Aggregation
Port is currently attached to. Zero indicates that the Aggregation
Port is not currently attached to an Aggregator. This value is read-only.ro InterfaceIndex (IF-MIB) .1.1.2.840.10006.300.43.1.2.1.1.13 |
dot3adAggPortActorPortThe port number locally assigned to the Aggregation Port.
The port number is communicated in LACPDUs as the
Actor_Port. This value is read-only.ro INTEGER .1.1.2.840.10006.300.43.1.2.1.1.14 |
dot3adAggPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-write.rw INTEGER .1.1.2.840.10006.300.43.1.2.1.1.15 |
dot3adAggPortPartnerAdminPortThe current administrative value of the port number
for the protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation.rw INTEGER .1.1.2.840.10006.300.43.1.2.1.1.16 |
dot3adAggPortPartnerOperPortThe operational port number assigned to this Aggregation
Port by the Aggregation Ports protocol Partner. The value
of this attribute may contain the manually configured value
carried in aAggPortPartnerAdminPort if there is no protocol
Partner. This 16-bit value is read-only.ro INTEGER .1.1.2.840.10006.300.43.1.2.1.1.17 |
dot3adAggPortPartnerAdminPortPriorityThe current administrative value of the port priority
for the protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort,
in order to achieve manually configured aggregation.rw INTEGER .1.1.2.840.10006.300.43.1.2.1.1.18 |
dot3adAggPortPartnerOperPortPriorityThe priority value assigned to this Aggregation Port
by the Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminPortPriority if there is no
protocol Partner. This 16-bit value is read-only.ro INTEGER .1.1.2.840.10006.300.43.1.2.1.1.19 |
dot3adAggPortActorAdminStateA string of 8 bits, corresponding to the administrative values
of Actor_State (43.4.2 [Part 3]) as transmitted by the Actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1 (LACP_Timeout), the third bit
corresponds to bit 2 (Aggregation), the fourth bit corresponds to
bit 3 (Synchronization), the fifth bit corresponds to bit 4
(Collecting), the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted), and the eighth
bit corresponds to bit 7 (Expired). These values allow
administrative control over the values of LACP_Activity,
LACP_Timeout and Aggregation. This attribute value is read-write.rw LacpState .1.1.2.840.10006.300.43.1.2.1.1.20 |
dot3adAggPortActorOperStateA string of 8 bits, corresponding to the current
operational values of Actor_State as transmitted by the
Actor in LACPDUs. The bit allocations are as defined in
30.7.2.1.20. This attribute value is read-only.ro LacpState .1.1.2.840.10006.300.43.1.2.1.1.21 |
dot3adAggPortPartnerAdminStateA string of 8 bits, corresponding to the current administrative
value of Actor_State for the protocol Partner. The bit
allocations are as defined in 30.7.2.1.20. This attribute value is
read-write. The assigned value is used in order to achieve
manually configured aggregation.rw LacpState .1.1.2.840.10006.300.43.1.2.1.1.22 |
dot3adAggPortPartnerOperStateA string of 8 bits, corresponding to the current values of
Actor_State in the most recently received LACPDU transmitted
by the protocol Partner. The bit allocations are as defined in
30.7.2.1.20. In the absence of an active protocol Partner, this
value may reflect the manually configured value
aAggPortPartnerAdminState. This attribute value is read-only.ro LacpState .1.1.2.840.10006.300.43.1.2.1.1.23 |
dot3adAggPortAggregateOrIndividualA read-only Boolean value indicating whether the
Aggregation Port is able to Aggregate (TRUE) or is
only able to operate as an Individual link (FALSE).ro TruthValue (SNMPv2-TC) .1.1.2.840.10006.300.43.1.2.1.1.24 |
dot3adAggPortStatsTableA table that contains Link Aggregation information
about every port that is associated with this device.
A row appears in this table for each physical port. SEQUENCE OF Dot3adAggPortStatsEntry .1.1.2.840.10006.300.43.1.2.2 |
dot3adAggPortStatsEntryA list of Link Aggregation Control Protocol statistics
for each port on this device. Dot3adAggPortStatsEntry .1.1.2.840.10006.300.43.1.2.2.1 |
dot3adAggPortStatsLACPDUsRxThe number of valid LACPDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.2.1.1 |
dot3adAggPortStatsMarkerPDUsRxThe number of valid Marker PDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.2.1.2 |
dot3adAggPortStatsMarkerResponsePDUsRxThe number of valid Marker Response PDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.2.1.3 |
dot3adAggPortStatsUnknownRxThe number of frames received that either:
- carry the Slow Protocols Ethernet Type value (43B.4 [Part 3]),
but contain an unknown PDU, or:
- are addressed to the Slow Protocols group MAC
Address (43B.4), but do not carry the Slow Protocols Ethernet Type.
This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.2.1.4 |
dot3adAggPortStatsIllegalRxThe number of frames received that carry the Slow
Protocols Ethernet Type value (43B.4), but contain a badly formed
PDU or an illegal value of Protocol Subtype (43B.4 [Part 3]).
This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.2.1.5 |
dot3adAggPortStatsLACPDUsTxThe number of LACPDUs transmitted on this
Aggregation Port. This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.2.1.6 |
dot3adAggPortStatsMarkerPDUsTxThe number of Marker PDUs transmitted on this
Aggregation Port. This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.2.1.7 |
dot3adAggPortStatsMarkerResponsePDUsTxThe number of Marker Response PDUs transmitted
on this Aggregation Port. This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.2.1.8 |
dot3adAggPortDebugTableA table that contains Link Aggregation debug
information about every port that is associated with
this device. A row appears in this table for each
physical port. SEQUENCE OF Dot3adAggPortDebugEntry .1.1.2.840.10006.300.43.1.2.3 |
dot3adAggPortDebugEntryA list of the debug parameters for a port. Dot3adAggPortDebugEntry .1.1.2.840.10006.300.43.1.2.3.1 |
dot3adAggPortDebugRxStateThis attribute holds the value current if the Receive
state machine for the Aggregation Port is in the
CURRENT state, expired if the Receive state machine
is in the EXPIRED state, defaulted if the Receive state
machine is in the DEFAULTED state, initialize if the
Receive state machine is in the INITIALIZE state,
lacpDisabled if the Receive state machine is in the
LACP_DISABLED state, or portDisabled if the Receive
state machine is in the PORT_DISABLED state.
This value is read-only.ro Enumeration .1.1.2.840.10006.300.43.1.2.3.1.1 |
dot3adAggPortDebugLastRxTimeThe value of aTimeSinceSystemReset (F.2.1) when
the last LACPDU was received by this Aggregation Port.
This value is read-only.ro TimeTicks (SNMPv2-SMI) .1.1.2.840.10006.300.43.1.2.3.1.2 |
dot3adAggPortDebugMuxStateThis attribute holds the value detached if the Mux
state machine (43.4.14 [Part 3]) for the Aggregation Port is
in the DETACHED state, waiting if the Mux state machine
is in the WAITING state, attached if the Mux state
machine for the Aggregation Port is in the ATTACHED
state, collecting if the Mux state machine for the
Aggregation Port is in the COLLECTING state, distributing
if the Mux state machine for the Aggregation Port is
in the DISTRIBUTING state, and collecting_distributing
if the Mux state machine for the Aggregation Port is in
the COLLECTING_DISTRIBUTING state.
This value is read-only.ro Enumeration .1.1.2.840.10006.300.43.1.2.3.1.3 |
dot3adAggPortDebugMuxReasonA human-readable text string indicating the reason
for the most recent change of Mux machine state.
This value is read-only.ro DisplayString (SNMPv2-TC) .1.1.2.840.10006.300.43.1.2.3.1.4 |
dot3adAggPortDebugActorChurnStateThe state of the Actor Churn Detection machine
(43.4.17 [Part 3]) for the Aggregation Port. A value of noChurn
indicates that the state machine is in either the
NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR
state, and churn indicates that the state machine is in the
ACTOR_CHURN state. This value is read-only.ro ChurnState .1.1.2.840.10006.300.43.1.2.3.1.5 |
dot3adAggPortDebugPartnerChurnStateThe state of the Partner Churn Detection machine
(43.4.17 [Part 3]) for the Aggregation Port. A value of noChurn
indicates that the state machine is in either the
NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR
state, and churn indicates that the state machine is
in the PARTNER_CHURN state.
This value is read-only.ro ChurnState .1.1.2.840.10006.300.43.1.2.3.1.6 |
dot3adAggPortDebugActorChurnCountCount of the number of times the Actor Churn state
machine has entered the ACTOR_CHURN state.
This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.3.1.7 |
dot3adAggPortDebugPartnerChurnCountCount of the number of times the Partner Churn
state machine has entered the PARTNER_CHURN state.
This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.3.1.8 |
dot3adAggPortDebugActorSyncTransitionCountCount of the number of times the Actors Mux state
machine (43.4.15 [Part 3]) has entered the IN_SYNC state.
This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.3.1.9 |
dot3adAggPortDebugPartnerSyncTransitionCountCount of the number of times the Partners Mux
state machine (43.4.15 [Part 3]) has entered the IN_SYNC state.
This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.3.1.10 |
dot3adAggPortDebugActorChangeCountCount of the number of times the Actors perception of
the LAG ID for this Aggregation Port has changed.
This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.3.1.11 |
dot3adAggPortDebugPartnerChangeCountCount of the number of times the Partners perception of
the LAG ID (see 43.3.6.1 [Part 3]) for this Aggregation Port has changed.
This value is read-only.ro Counter32 .1.1.2.840.10006.300.43.1.2.3.1.12 |
dot3adTablesLastChangedThis object indicates the time of the
most recent change to the dot3adAggTable,
dot3adAggPortListTable, or
dot3adAggPortTable.ro TimeTicks (SNMPv2-SMI) .1.1.2.840.10006.300.43.1.3 |
dot3adAggConformance OBJECT IDENTIFIER .1.1.2.840.10006.300.43.2 |
dot3adAggGroups OBJECT IDENTIFIER .1.1.2.840.10006.300.43.2.1 |
dot3adAggCompliances OBJECT IDENTIFIER .1.1.2.840.10006.300.43.2.2 |