Dell-DHCP-MIB
The private MIB module definition for DHCP server support in Dell devices.
Main OID:
rsDHCP.1.3.6.1.4.1.89.38
107
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
rsDHCPThe private MIB module definition for DHCP server support in Dell devices. MODULE-IDENTITY .1.3.6.1.4.1.89.38 |
IMPORTSThe private MIB module definition for DHCP server support in Dell devices. Unknown .1.3.6.1.4.1.89.38 |
rsDhcpMibVersionDHCP MIB's version, the current version is 4.rw INTEGER .1.3.6.1.4.1.89.38.14 |
rlDhcpRelayMaximalNumberOfNonIpVlansMaximal number non-ip vlans that DHCP relay can be confirued on.ro Unsigned32 .1.3.6.1.4.1.89.38.23 |
rlDhcpRelayCurrentNumberOfNonIpVlansCurrent number non-ip vlans that DHCP relay can be confirued on.ro Unsigned32 .1.3.6.1.4.1.89.38.24 |
rlDhcpRelayEnableEnable or disable the use of the DHCP relay.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.38.25 |
rlDhcpRelayExistsThis variable shows whether the device can function as a DHCP Relay Agent.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.38.26 |
rlDhcpRelayNextServerTableThe DHCP Relay Next Servers configuration Table SEQUENCE OF RlDhcpRelayNextServerEntry .1.3.6.1.4.1.89.38.27 |
rlDhcpRelayNextServerEntryThe row definition for this table. DHCP requests are relayed to the
specified next server according to their threshold values. RlDhcpRelayNextServerEntry .1.3.6.1.4.1.89.38.27.1 |
rlDhcpRelayNextServerIpAddrThe IPAddress of the next configuration server. DHCP Server may
act as a DHCP relay if this parameter is not equal to 0.0.0.0.ro IpAddress .1.3.6.1.4.1.89.38.27.1.1 |
rlDhcpRelayNextServerSecThresholdDHCP requests are relayed only if their SEC field is greater or
equal to the threshold value in order to allow local DHCP Servers
to answer first.rw Unsigned32 .1.3.6.1.4.1.89.38.27.1.2 |
rlDhcpRelayNextServerRowStatusThis variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.38.27.1.3 |
rlDhcpRelayInterfaceTableThe enabled DHCP Relay Interface Table SEQUENCE OF RlDhcpRelayInterfaceEntry .1.3.6.1.4.1.89.38.28 |
rlDhcpRelayInterfaceEntryThe row definition for this table. The user can add entry when DHCP relay is enabled on Interface. RlDhcpRelayInterfaceEntry .1.3.6.1.4.1.89.38.28.1 |
rlDhcpRelayInterfaceIfindexThe Interface on which an user enables a DHCP relayrw INTEGER .1.3.6.1.4.1.89.38.28.1.1 |
rlDhcpRelayInterfaceUseGiaddrThe flag is used to set a DHCP relay interface to use GiAddr in the standard way. Default is TRUE.
The field is not supported.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.38.28.1.2 |
rlDhcpRelayInterfaceRowStatusEntry status. Can be destroy, active or createAndGorw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.38.28.1.3 |
rlDhcpRelayInterfaceListTableThis table contains one entry. The entry contains port list and vlan lists of interfaces that have configured DHCP relay SEQUENCE OF RLDhcpRelayInterfaceListEntry .1.3.6.1.4.1.89.38.29 |
rlDhcpRelayInterfaceListEntryThe entry contains port list and vlan lists of interfaces that have configured DHCP relay. RLDhcpRelayInterfaceListEntry .1.3.6.1.4.1.89.38.29.1 |
rlDhcpRelayInterfaceListIndexIndex in the table. Already 1.ro INTEGER .1.3.6.1.4.1.89.38.29.1.1 |
rlDhcpRelayInterfaceListPortListDHCP relay Interface Port List.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.38.29.1.2 |
rlDhcpRelayInterfaceListVlanId1To1024DHCP relay Interface VlanId List 1.rw VlanList1 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.38.29.1.3 |
rlDhcpRelayInterfaceListVlanId1025To2048DHCP relay Interface VlanId List 2.rw VlanList2 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.38.29.1.4 |
rlDhcpRelayInterfaceListVlanId2049To3072DHCP relay Interface VlanId List 3.rw VlanList3 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.38.29.1.5 |
rlDhcpRelayInterfaceListVlanId3073To4094DHCP relay Interface VlanId List 4.rw VlanList4 (Dell-BRIDGEMIBOBJECTS-MIB) .1.3.6.1.4.1.89.38.29.1.6 |
rlDhcpSrvEnableEnable or Disable the use of the DHCP Server.
For a router product the default value is TRUE. For a switch product the default is FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.38.30 |
rlDhcpSrvExistsThis variable shows whether the device can function as a DHCP Server.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.38.31 |
rlDhcpSrvDbLocationDescribes where DHCP Server database is stored.roobsolete Enumeration .1.3.6.1.4.1.89.38.32 |
rlDhcpSrvMaxNumOfClientsThis variable shows maximum number of clients that can be
supported by DHCP Server dynamic allocation.ro Unsigned32 .1.3.6.1.4.1.89.38.33 |
rlDhcpSrvDbNumOfActiveEntriesThis variable shows number of active (valid) entries stored in database.ro Unsigned32 .1.3.6.1.4.1.89.38.34 |
rlDhcpSrvDbEraseThe value is always false. Setting this variable to true causes erasing all entries in DHCP database.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.38.35 |
rlDhcpSrvProbeEnableEnable or Disable the use of the DHCP probe before allocating an IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.38.36 |
rlDhcpSrvProbeTimeoutIndicates the peiod of time in milliseconds the DHCP probe will wait before
issuing a new trial or deciding that no other device on the network
has the IP address which DHCP considers allocating.rw Unsigned32 .1.3.6.1.4.1.89.38.37 |
rlDhcpSrvProbeRetriesIndicates how many times DHCP will probe before deciding that no other
device on the network has the IP address which DHCP
considers allocating.rw Unsigned32 .1.3.6.1.4.1.89.38.38 |
rlDhcpSrvDefaultNetworkPoolNameContains a default network pool name. Used in case of one network pool only.ro DisplayString .1.3.6.1.4.1.89.38.39 |
rlDhcpSrvIpAddrTableTable of IP Addresses allocated by DHCP Server by static
and dynamic allocations. SEQUENCE OF RlDhcpSrvIpAddrEntry .1.3.6.1.4.1.89.38.45 |
rlDhcpSrvIpAddrEntryThe row definition for this table.
Parameters of DHCP allocated IP Addresses table. RlDhcpSrvIpAddrEntry .1.3.6.1.4.1.89.38.45.1 |
rlDhcpSrvIpAddrIpAddrThe IP address that was allocated by DHCP Server.rw IpAddress .1.3.6.1.4.1.89.38.45.1.1 |
rlDhcpSrvIpAddrIpNetMaskThe subnet mask associated with the IP address of this entry.
The value of the mask is an IP address with all the network bits
set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.89.38.45.1.2 |
rlDhcpSrvIpAddrIdentifierUnique Identifier for client. Either physical address or DHCP Client Identifier.rw OCTET STRING .1.3.6.1.4.1.89.38.45.1.3 |
rlDhcpSrvIpAddrIdentifierTypeIdentifier Type. Either physical address or DHCP Client Identifier.rw Enumeration .1.3.6.1.4.1.89.38.45.1.4 |
rlDhcpSrvIpAddrClnHostNameClient Host Name. DHCP Server will use it to update DNS Server.
Must be unique per client.rw SnmpAdminString .1.3.6.1.4.1.89.38.45.1.5 |
rlDhcpSrvIpAddrMechanismMechanism of allocation IP Address by DHCP Server.
The only value that can be set by user is manual.rw Enumeration .1.3.6.1.4.1.89.38.45.1.6 |
rlDhcpSrvIpAddrAgeTimeAge time of the IP Address.ro Unsigned32 .1.3.6.1.4.1.89.38.45.1.7 |
rlDhcpSrvIpAddrPoolNameIp address pool name. A unique name for host pool static allocation,
or network pool name in case of dynamic allocation.rw DisplayString .1.3.6.1.4.1.89.38.45.1.8 |
rlDhcpSrvIpAddrConfParamsNameThis variable points (serves as key) to appropriate set of parameters
in the DHCP Server configuration parameters table.rw DisplayString .1.3.6.1.4.1.89.38.45.1.9 |
rlDhcpSrvIpAddrRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.38.45.1.10 |
rlDhcpSrvIpAddrLeaseTimeLease time of the IP Address. Get a value of network pool lease time at allocation time.ro Unsigned32 .1.3.6.1.4.1.89.38.45.1.11 |
rlDhcpSrvIpAddrStateState of allocation IP Address by DHCP Server.ro Enumeration .1.3.6.1.4.1.89.38.45.1.12 |
rlDhcpSrvIpAddrOptionParamsNameThe name of DHCP Option Table.rw DisplayString .1.3.6.1.4.1.89.38.45.1.13 |
rlDhcpSrvDynamicTableThe DHCP Dynamic Server's configuration Table SEQUENCE OF RlDhcpSrvDynamicEntry .1.3.6.1.4.1.89.38.46 |
rlDhcpSrvDynamicEntryThe row definition for this table. Parameters sent in
as a DHCP Reply to DHCP Request with specified indices RlDhcpSrvDynamicEntry .1.3.6.1.4.1.89.38.46.1 |
rlDhcpSrvDynamicPoolNameThe name of DHCP dynamic addresses pool.rw DisplayString .1.3.6.1.4.1.89.38.46.1.1 |
rlDhcpSrvDynamicIpAddrFromThe first IP address allocated in this row.rw IpAddress .1.3.6.1.4.1.89.38.46.1.2 |
rlDhcpSrvDynamicIpAddrToThe last IP address allocated in this row.rw IpAddress .1.3.6.1.4.1.89.38.46.1.3 |
rlDhcpSrvDynamicIpNetMaskThe subnet mask associated with the IP addresses of this entry.
The value of the mask is an IP address with all the network bits
set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.89.38.46.1.4 |
rlDhcpSrvDynamicLeaseTimeMaximum lease-time in seconds granted to a requesting DHCP client.
For automatic allocation use 0xFFFFFFFF.
To exclude addresses from allocation mechanism, set this value to 0.rw Unsigned32 .1.3.6.1.4.1.89.38.46.1.5 |
rlDhcpSrvDynamicProbeEnableEnable or Disable the use of the DHCP probe before allocating the address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.38.46.1.6 |
rlDhcpSrvDynamicTotalNumOfAddrTotal number of addresses in space.ro Unsigned32 .1.3.6.1.4.1.89.38.46.1.7 |
rlDhcpSrvDynamicFreeNumOfAddrFree number of addresses in space.ro Unsigned32 .1.3.6.1.4.1.89.38.46.1.8 |
rlDhcpSrvDynamicConfParamsNameThis variable points (serves as key) to appropriate set of parameters
in the DHCP Server configuration parameters table.rw DisplayString .1.3.6.1.4.1.89.38.46.1.9 |
rlDhcpSrvDynamicRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.38.46.1.10 |
rlDhcpSrvDynamicAvailableNumOfAddrNumber of available addresses in space - all range minus excluded.ro Unsigned32 .1.3.6.1.4.1.89.38.46.1.11 |
rlDhcpSrvDynamicNumOfPreallocatedAddrThe number of preallocated addresses in space.ro Unsigned32 .1.3.6.1.4.1.89.38.46.1.12 |
rlDhcpSrvDynamicNumOfValidAddrThe number of Valid (allocated) addresses in space.ro Unsigned32 .1.3.6.1.4.1.89.38.46.1.13 |
rlDhcpSrvDynamicNumOfExpiredAddrThe number of expired addresses in space.ro Unsigned32 .1.3.6.1.4.1.89.38.46.1.14 |
rlDhcpSrvDynamicNumOfDeclinedAddrThe number of declined addresses in space.ro Unsigned32 .1.3.6.1.4.1.89.38.46.1.15 |
rlDhcpSrvDynamicOptionParamsNameThe name of DHCP Option Table.rw DisplayString .1.3.6.1.4.1.89.38.46.1.16 |
rlDhcpSrvConfParamsTableThe DHCP Configuration Parameters Table SEQUENCE OF RlDhcpSrvConfParamsEntry .1.3.6.1.4.1.89.38.47 |
rlDhcpSrvConfParamsEntryThe row definition for this table.
Each entry corresponds to one specific parameters set. RlDhcpSrvConfParamsEntry .1.3.6.1.4.1.89.38.47.1 |
rlDhcpSrvConfParamsNameThis value is a unique index for the
entry in the rlDhcpSrvConfParamsTable.rw DisplayString .1.3.6.1.4.1.89.38.47.1.1 |
rlDhcpSrvConfParamsNextServerIpThe IP of next server for client to use in configuration process.rw IpAddress .1.3.6.1.4.1.89.38.47.1.2 |
rlDhcpSrvConfParamsNextServerNameThe mame of next server for client to use in configuration process.rw DisplayString .1.3.6.1.4.1.89.38.47.1.3 |
rlDhcpSrvConfParamsBootfileNameName of file for client to request from next server.rw DisplayString .1.3.6.1.4.1.89.38.47.1.4 |
rlDhcpSrvConfParamsRoutersListThe value of option code 3, which defines default routers list.
Each IP address is represented in dotted decimal notation format
with ';' between them.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.38.47.1.5 |
rlDhcpSrvConfParamsTimeSrvListThe value of option code 4, which defines time servers list.
Each IP address is represented in dotted decimal notation format
with ';' between them.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.38.47.1.6 |
rlDhcpSrvConfParamsDnsListThe value of option code 6, which defines the list of DNSs.
Each IP address is represented in dotted decimal notation format
with ';' between them.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.38.47.1.7 |
rlDhcpSrvConfParamsDomainNameThe value option code 15, which defines the domain name..rw SnmpAdminString .1.3.6.1.4.1.89.38.47.1.8 |
rlDhcpSrvConfParamsNetbiosNameListThe value option code 44, which defines the list of NETBios
Name Servers. Each IP address is represented in dotted decimal
notation format with ';' between them.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.38.47.1.9 |
rlDhcpSrvConfParamsNetbiosNodeTypeThe value option code 46, which defines the NETBios node type.
The option will be added only if rlDhcpSrvConfParamsNetbiosNameList
is not empty.rw Enumeration .1.3.6.1.4.1.89.38.47.1.10 |
rlDhcpSrvConfParamsCommunityThe value of site-specific option 128, which defines Community.
The option will be added only if rlDhcpSrvConfParamsNmsIp is set.rwobsolete DisplayString .1.3.6.1.4.1.89.38.47.1.11 |
rlDhcpSrvConfParamsNmsIpThe value of site-specific option 129,
which defines IP of Network Manager.rwobsolete IpAddress .1.3.6.1.4.1.89.38.47.1.12 |
rlDhcpSrvConfParamsOptionsListThe sequence of option segments. Each option segment
is represented by a triplet <code/length/value>.
The code defines the code of each supported option.
The length defines the length of each supported option.
The value defines the value of the supported option.
If there is a number of elements in the value field,
they are divided by ','. Each element of type IP address
in value field is represented in dotted decimal notation
format.rwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.38.47.1.13 |
rlDhcpSrvConfParamsRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.38.47.1.14 |
rlDhcpSrvNumOfNetworkPoolsThis variable shows number of network pools (not excluded).ro Unsigned32 .1.3.6.1.4.1.89.38.48 |
rlDhcpSrvNumOfExcludedPoolsThis variable shows number of excluded pools.ro Unsigned32 .1.3.6.1.4.1.89.38.49 |
rlDhcpSrvNumOfHostPoolsThis variable shows number of static entries stored in database.ro Unsigned32 .1.3.6.1.4.1.89.38.50 |
rlDhcpSrvNumOfDynamicEntriesThis variable shows number of dynamic and automatic (not static) entries stored in database.ro Unsigned32 .1.3.6.1.4.1.89.38.51 |
rlDhcpSrvNumOfUsedEntriesThis variable shows number of entries (any type) stored in database.ro Unsigned32 .1.3.6.1.4.1.89.38.52 |
rlDhcpSrvNumOfPreAllocatedEntriesThis variable shows number of preallocated entries.ro Unsigned32 .1.3.6.1.4.1.89.38.53 |
rlDhcpSrvNumOfExpiredEntriesThis variable shows number of expired entries.ro Unsigned32 .1.3.6.1.4.1.89.38.54 |
rlDhcpSrvNumOfDeclinedEntriesThis variable shows number of declined entries.ro Unsigned32 .1.3.6.1.4.1.89.38.55 |
rlDhcpSrvNumOfAutomaticEntriesThis variable shows number of automatic entries.ro Unsigned32 .1.3.6.1.4.1.89.38.56 |
rlDhcpSrvOptionParamsTableThe DHCP Option Parameters Table SEQUENCE OF RlDhcpSrvOptionParamsEntry .1.3.6.1.4.1.89.38.57 |
rlDhcpSrvOptionParamsEntryThe row definition for this table.
Each entry corresponds to one specific parameters set. RlDhcpSrvOptionParamsEntry .1.3.6.1.4.1.89.38.57.1 |
rlDhcpSrvOptionParamsNameThis value is a unique index for the
entry in the rlDhcpSrvOptionParamsTable.rw DisplayString .1.3.6.1.4.1.89.38.57.1.1 |
rlDhcpSrvOptionParamsCodeThe option code.rw Unsigned32 .1.3.6.1.4.1.89.38.57.1.2 |
rlDhcpSrvOptionParamsTypeThe option type.rw RlDhcpSrvOptionTypeEnum .1.3.6.1.4.1.89.38.57.1.3 |
rlDhcpSrvOptionParamsOrigStringThe option value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.38.57.1.4 |
rlDhcpSrvOptionParamsDescriptionThe option description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.38.57.1.5 |
rlDhcpSrvOptionParamsRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.38.57.1.6 |
rlDhcpSrvAuxOptionTableThe DHCP Auxulary Option Table SEQUENCE OF RlDhcpSrvAuxOptionEntry .1.3.6.1.4.1.89.38.58 |
rlDhcpSrvAuxOptionEntryThe row definition for this table.
Each entry contains pair option code/option type that permitted by option command. RlDhcpSrvAuxOptionEntry .1.3.6.1.4.1.89.38.58.1 |
rlDhcpSrvAuxOptionCodeThe option Code.ro Unsigned32 .1.3.6.1.4.1.89.38.58.1.1 |
rlDhcpSrvAuxOptionTypeThe option enumeration.ro RlDhcpSrvOptionTypeEnum .1.3.6.1.4.1.89.38.58.1.2 |
rlDhcpSrvAuxOptionMinValThe minimal value of this option Code.ro Unsigned32 .1.3.6.1.4.1.89.38.58.1.3 |
rlDhcpSrvAuxOptionMaxValThe maximal value of this option Code.ro Unsigned32 .1.3.6.1.4.1.89.38.58.1.4 |