DOCS-CABLE-DEVICE-TRAP-MIB
AI MIB Summary
The DOCS-CABLE-DEVICE-TRAP-MIB defines SNMP trap notifications for Cable Modems and CMTS devices within DOCSIS 2.0 environments, specifically replacing deprecated events from the docsIfExt MIB with RF MIB draft objects to monitor physical layer link states, signal quality anomalies, and device registration failures.
Modified by David Raftus (david.raftus@imedia.com) to deprecate trap definition objects originating from the docsIfExt MIB. Corresponding objects from the Docsis 2.0 RF MIB draft were added to the trap definitions.
Main OID:
docsDevTrapMIB.1.3.6.1.4.1.3727.20.20.3.1.69.10
38
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
docsDevTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.69.2.1 |
docsDevTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.1 |
docsDevCmTrapControlThe object is used to enable CM traps. From left to right,
the set bit indicates the corresponding CM trap is enabled.
For example, if the first bit is set, then
docsDevCmInitTLVUnknownTrap is enabled. If it is zero,
the trap is disabled.rw Bits .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.1.1 |
docsDevCmtsTrapControlThe object is used to enable CMTS traps. From left to right,
the set bit indicates the corresponding CMTS trap is enabled.
For example, if the first bit is set, then
docsDevCmtsInitRegRspFailTrap is enabled. If it is zero,
the trap is disabled.rw Bits .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.1.2 |
docsDevCmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0 |
docsDevCmInitTLVUnknownTrapEvent due to detection of unknown TLV during
the TLV parsing process.
The values of docsDevEvLevel, docsDevId, and
docsDevEvText are from the entry which logs this event
in the docsDevEventTable. The docsIfDocsisBaseCapability
indicates the DOCSIS version information. The docsIfCmStatusDocsisOperMode indicates the QOS level of the CM, while the docsIfCmStatusModulationType indicates the upstream modulation methodology used by the CM.
The ifPhysAddress value is the MAC address of the cable interface of this cable modem.
The docsIfCmCmtsAddress specifies the MAC address
of the CMTS to which the CM is connected (if there is a cable
card/ interface in the CMTS, then it is actually the MAC address of the cable
interface which connected to the CM).
This part of information is uniformed across all CM traps. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.1 |
docsDevCmDynServReqFailTrapAn event to report the failure of a dynamic service
request happened during the dynamic services process. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.2 |
docsDevCmDynServRspFailTrapAn event to report the failure of a dynamic service
response happened during the dynamic services process. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.3 |
docsDevCmDynServAckFailTrapAn event to report the failure of a dynamic service
acknowledgement happened during the dynamic services process. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.4 |
docsDevCmBpiInitTrapAn event to report the failure of a BPI initialization
attempt happened during the registration process. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.5 |
docsDevCmBPKMTrapAn event to report the failure of a BPKM operation. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.6 |
docsDevCmDynamicSATrapAn event to report the failure of a dynamic security
association operation. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.7 |
docsDevCmDHCPFailTrapAn event to report the failure of a DHCP server.
The value of docsDevServerDhcp is the IP address
of the DHCP server. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.8 |
docsDevCmSwUpgradeInitTrapAn event to report a software upgrade initiated
event. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.9 |
docsDevCmSwUpgradeFailTrapAn event to report the failure of a software upgrade
attempt. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.10 |
docsDevCmSwUpgradeSuccessTrapAn event to report the Software upgrade success event.
The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.11 |
docsDevCmSwUpgradeCVCFailTrapAn event to report the failure of the verification
of code file happened during a secure software upgrade
attempt. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.12 |
docsDevCmTODFailTrapAn event to report the failure of a time of day server.
The value of docsDevServerTime indicates the server IP
address. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.13 |
docsDevCmDCCReqFailTrapAn event to report the failure of a dynamic channel
change request happened during the dynamic channel
change process in the CM side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.14 |
docsDevCmDCCRspFailTrapAn event to report the failure of a dynamic channel
change response happened during the dynamic channel
change process in the CM side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.15 |
docsDevCmDCCAckFailTrapAn event to report the failure of a dynamic channel
change acknowledgement happened during the dynamic channel
change process in the CM side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.2.0.16 |
docsDevCmtsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0 |
docsDevCmtsInitRegReqFailTrapAn event to report the failure of a registration
request from CM happening during the CM initialization
process and detected on the CMTS side. The values of
docsDevEvLevel, docsDevId, and docsDevEvText are from
the entry which logs this event in the
docsDevEventTable. The docsIfCmtsCmStatusDocsisRegMode
and docsIfCmtsCmStatusMacAddress indicate the docsis
QOS version and the MAC address of the requesting CM.
The docsIfCmtsCmModulationType indicates the upstream
modulation methodology used by the connected CM.
The docsIfDocsisBaseCapability and ifPhysAddress
indicate the docsis version of the CMTS and the MAC
address of the CMTS (if there is a cable card/ interface
in the CMTS, then it is actually the MAC address of the
cable interface which connected to the CM) cable card
connected to the CM. This part of information is
uniformed across all CMTS traps. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.1 |
docsDevCmtsInitRegRspFailTrapAn event to report the failure of a registration
response happened during the CM initialization
process and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.2 |
docsDevCmtsInitRegAckFailTrapAn event to report the failure of a registration
acknowledgement from CM happened during the CM
initialization process and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.3 |
docsDevCmtsDynServReqFailTrapAn event to report the failure of a dynamic service
request happened during the dynamic services process
and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.4 |
docsDevCmtsDynServRspFailTrapAn event to report the failure of a dynamic service
response happened during the dynamic services process
and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.5 |
docsDevCmtsDynServAckFailTrapAn event to report the failure of a dynamic service
acknowledgement happened during the dynamic services
process and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.6 |
docsDevCmtsBpiInitTrapAn event to report the failure of a BPI initialization
attempt happened during the CM registration process
and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.7 |
docsDevCmtsBPKMTrapAn event to report the failure of a BPKM operation
which is detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.8 |
docsDevCmtsDynamicSATrapAn event to report the failure of a dynamic security
association operation which is detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.9 |
docsDevCmtsDCCReqFailTrapAn event to report the failure of a dynamic channel
change request happened during the dynamic channel
change process in the CM side and detected in the
CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.10 |
docsDevCmtsDCCRspFailTrapAn event to report the failure of a dynamic channel
change response happened during the dynamic channel
change process in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.11 |
docsDevCmtsDCCAckFailTrapAn event to report the failure of a dynamic channel
change acknowledgement happened during the dynamic channel
change process in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.3.0.12 |
docsDevTrapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.4 |
docsDevTrapGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.4.1 |
docsDevTrapCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.69.2.1.4.2 |
docsDevTrapMIBModified by David Raftus (david.raftus@imedia.com) to
deprecate trap definition objects originating from
the docsIfExt MIB. Corresponding objects from the
Docsis 2.0 RF MIB draft were added to the trap
definitions. MODULE-IDENTITY .1.3.6.1.4.1.3727.20.20.3.1.69.10 |