DOCS-IF-EXT-MIB
The DOCS-IF-EXT-MIB extends the standard DOCS-IF-MIB to provide vendor-specific extensions for monitoring and managing cable modem termination system (CMTS) and cable modem interfaces, specifically adding support for advanced DOCSIS 3.0+ metrics such as channel bonding, RF channel status, and extended interface statistics not defined in RFC 2670.
Imported Objects
Objects
9 total| Object Name |
|---|
docsIfExtMibThis is the extension Module to rfc2670 DOCS-IF-MIB. MODULE-IDENTITY .1.3.6.1.2.1.10.127.21 |
docsIfDocsisCapabilityIndication of the DOCSIS capability of the device.ro DocsisVersion .1.3.6.1.2.1.10.127.21.1 |
docsIfDocsisOperModeIndication whether the device has registered as a 1.0 or 1.1.
For CMTS and unregistered CM, it is always the same as
docsDocsisCapability.ro DocsisVersion .1.3.6.1.2.1.10.127.21.2 |
docsIfCmtsCmStatusExtTableA set of objects in the CMTS, maintained for each
Cable Modem connected to this CMTS. SEQUENCE OF DocsIfCmtsCmStatusExtEntry .1.3.6.1.2.1.10.127.21.3 |
docsIfCmtsCmStatusExtEntryStatus information for a single Cable Modem.
An entry in this table exists for each Cable Modem
which is connected to the CMTS. DocsIfCmtsCmStatusExtEntry .1.3.6.1.2.1.10.127.21.3.1 |
docsIfCmtsCmStatusDocsisModeIndication whether the CM has registered as a 1.0 or 1.1 modemro DocsisVersion .1.3.6.1.2.1.10.127.21.3.1.1 |
docsIfExtConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.21.4 |
docsIfExtCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.21.4.1 |
docsIfExtGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.21.4.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module