DLINK-3100-QOS-CLI-MIB
Added:
StatisticsCntrNumOfBitsType StatisticsCntrType rlQosStatistics rlQosPortPolicyStatisticsTable rlQosSinglePolicerStatisticsTable rlQosAggregatePolicerStatisticsTable rlQosOutQueueStatisticsTable rlQosGlobalStatisticsCntrsTable.
Main OID:
rlQosCliMib.1.3.6.1.4.1.89.88
319
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
319 total| Object Name |
|---|
rlQosCliMibAdded:
StatisticsCntrNumOfBitsType
StatisticsCntrType
rlQosStatistics
rlQosPortPolicyStatisticsTable
rlQosSinglePolicerStatisticsTable
rlQosAggregatePolicerStatisticsTable
rlQosOutQueueStatisticsTable
rlQosGlobalStatisticsCntrsTable. MODULE-IDENTITY .1.3.6.1.4.1.89.88 |
rlQosCliQosModeThis scalar define in which mode the
system will work: basic , advance or none.rw QosObjectMode .1.3.6.1.4.1.89.88.1 |
rlQosCliBasicModeCfgThis scalar define in which Basic mode the
system will work:802.1p or DSCP or
DSCP-Mutation or TCP/UDP or none.rw QosObjectBasicMode .1.3.6.1.4.1.89.88.2 |
rlQosMaxNumOfAceThis scalar define in which Basic mode the
system will work:802.1p or DSCP or
DSCP-Mutation or TCP/UDP or none.rw INTEGER .1.3.6.1.4.1.89.88.3 |
rlQosOffsetTableThis table specifies Offset Table informationdeprecated SEQUENCE OF RlQosOffsetEntry .1.3.6.1.4.1.89.88.4 |
rlQosOffsetEntryEach entry in this table describes one classifier field.
The information includes: Offset Type the offset the mask and the
Pattern.
if the type is vlan then the value will be the vlan tag.
if the Type is in/out port it will be the device in/out port.
The index is sequential integer represent by rlQosOffsetIndexdeprecated RlQosOffsetEntry .1.3.6.1.4.1.89.88.4.1 |
rlQosOffsetIndexAn arbitrary incremental Index
for the offset table.deprecated INTEGER .1.3.6.1.4.1.89.88.4.1.1 |
rlQosOffsetTypeStart of the offset.rwdeprecated ClassOffsetType .1.3.6.1.4.1.89.88.4.1.2 |
rlQosOffsetValueThe Offset value.rwdeprecated INTEGER .1.3.6.1.4.1.89.88.4.1.3 |
rlQosOffsetMaskDefine which bit to be extracted from the offset.rwdeprecated INTEGER .1.3.6.1.4.1.89.88.4.1.4 |
rlQosOffsetPatternThe value to match too.rwdeprecated INTEGER .1.3.6.1.4.1.89.88.4.1.5 |
rlQosOffsetTuplePointerPointer for the relevant Tuple.rwdeprecated INTEGER .1.3.6.1.4.1.89.88.4.1.6 |
rlQosOffsetStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.4.1.7 |
rlQosTupleTableThis table specifies Tuple Table information SEQUENCE OF RlQosTupleEntry .1.3.6.1.4.1.89.88.5 |
rlQosTupleEntryEach entry in this table describes one Tuple.
The information includes: Tuple Type and the Tuples values.
The index is sequential integer represent by rlQosTupleIndex RlQosTupleEntry .1.3.6.1.4.1.89.88.5.1 |
rlQosTupleIndexAn arbitrary incremental Index
for the offset table. INTEGER .1.3.6.1.4.1.89.88.5.1.1 |
rlQosTupleTypeStart of the offset.rw ClassTupleType .1.3.6.1.4.1.89.88.5.1.2 |
rlQosTupleValue1The Tuple no.1 value can be regular integer
values only.rw INTEGER .1.3.6.1.4.1.89.88.5.1.3 |
rlQosTupleValue2The Tuple no.2 value can be IPv4/IPv6/MAC address
or protocol number with maskrw OCTET STRING .1.3.6.1.4.1.89.88.5.1.4 |
rlQosTupleStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.5.1.5 |
rlQosAceTableThis table specifies ACE table information SEQUENCE OF RlQosAceEntry .1.3.6.1.4.1.89.88.6 |
rlQosAceEntryEach entry in this table describes one Classifier Element.
The information includes: Action the ACE's Type the up to 8 tuples
pointers. The index is sequential integer represent by rlQosAceIndex RlQosAceEntry .1.3.6.1.4.1.89.88.6.1 |
rlQosAceIndexAn arbitrary incremental Index
for the ACE table. INTEGER .1.3.6.1.4.1.89.88.6.1.1 |
rlQosAceActionACE Action to take.rw AceActionType .1.3.6.1.4.1.89.88.6.1.2 |
rlQosAceTypeACE Typerw AceObjectType .1.3.6.1.4.1.89.88.6.1.3 |
rlQosAceTuple1ACE Tuple 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.6.1.4 |
rlQosAceTuple2ACE Tuple 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.6.1.5 |
rlQosAceTuple3ACE Tuple 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.6.1.6 |
rlQosAceTuple4ACE Tuple 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.6.1.7 |
rlQosAceTuple5ACE Tuple 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.6.1.8 |
rlQosAceTuple6ACE Tuple 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.6.1.9 |
rlQosAceTuple7ACE Tuple 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.6.1.10 |
rlQosAceTuple8ACE Tuple 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.6.1.11 |
rlQosAceAccountACE Accounting state.
When set to 'enabled' than appropriate statistic's
counter is provided for an ACE.
For Broadcom ASICs this counter shows number of
matched with ACE criteria packets.
For Dlink ASICs TBD.rw BinaryStatus .1.3.6.1.4.1.89.88.6.1.12 |
rlQosAceStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.6.1.13 |
rlQosAclTableThis table specifies ACL table information SEQUENCE OF RlQosAclEntry .1.3.6.1.4.1.89.88.7 |
rlQosAclEntryEach entry in this table describes one Classifier Element.
The information includes: Action and the row status. The ACE pointer
are in the ACL-ACE reference table.
The index is sequential integer represent by rlQosAceIndex RlQosAclEntry .1.3.6.1.4.1.89.88.7.1 |
rlQosAclIndexAn arbitrary incremental Index
for the ACE table. INTEGER .1.3.6.1.4.1.89.88.7.1.1 |
rlQosAclNameName ACL.rw DisplayString .1.3.6.1.4.1.89.88.7.1.2 |
rlQosAclTypeACL Type.rw AclObjectType .1.3.6.1.4.1.89.88.7.1.3 |
rlQosAclStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.7.1.4 |
rlQosAclAceRefTableThis table specifies the ACE to ACL
relationship. SEQUENCE OF RlQosAclAceRefEntry .1.3.6.1.4.1.89.88.8 |
rlQosAclAceRefEntryEach entry in this table describes the relationship
between ACE to ACL. Show which ACE include in one ACL.
The index is the ACE pointer represent
by rlQosAclAceRefAcePointer RlQosAclAceRefEntry .1.3.6.1.4.1.89.88.8.1 |
rlQosAclAceRefAcePointerThe Index is the ACE pointer INTEGER .1.3.6.1.4.1.89.88.8.1.1 |
rlQosAclAceRefAclPointerACL index Pointerrw INTEGER .1.3.6.1.4.1.89.88.8.1.2 |
rlQosAclAceRefStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.8.1.3 |
rlQosClassMapTableThis table specifies CCL table information SEQUENCE OF RlQosClassMapEntry .1.3.6.1.4.1.89.88.9 |
rlQosClassMapEntryEach entry in this table describes one Class Map Element.
The information includes: Classes Name,Class Action,
Policer pointer, and 1 match statements.
The index is sequential integer represent by rlQosClassMapIndex RlQosClassMapEntry .1.3.6.1.4.1.89.88.9.1 |
rlQosClassMapIndexClass Map Index INTEGER .1.3.6.1.4.1.89.88.9.1.1 |
rlQosClassMapNameName of the Class Map.rw DisplayString .1.3.6.1.4.1.89.88.9.1.2 |
rlQosClassMapTypeClass map typerw ClassMapType .1.3.6.1.4.1.89.88.9.1.3 |
rlQosClassMapActionClass Map Action.rw ClassMapAction .1.3.6.1.4.1.89.88.9.1.4 |
rlQosClassMapMarkValueMark value when mark action has been chosen in
Class Map Action field.rw INTEGER .1.3.6.1.4.1.89.88.9.1.5 |
rlQosClassMapPolicerPolicer pointer. 0-means no policer.rw INTEGER .1.3.6.1.4.1.89.88.9.1.6 |
rlQosClassMapMatch1Match ACL 1 pointer.rw INTEGER .1.3.6.1.4.1.89.88.9.1.7 |
rlQosClassMapMatch2Match ACL 2 pointer.rw INTEGER .1.3.6.1.4.1.89.88.9.1.8 |
rlQosClassMapMarkVlanIf 'enabled', than the classified
traffic will be remarked with new VLAN id.
If 'disabled' VLAN id is not changed.rw BinaryStatus .1.3.6.1.4.1.89.88.9.1.9 |
rlQosClassMapNewVlanIf rlQosClassMapMarkVlan 'enabled',
than the classified traffic will be
remarked with new VLAN id.
The value of this field sets new VLAN id.rw INTEGER .1.3.6.1.4.1.89.88.9.1.10 |
rlQosClassMapNewPortIf value not zero, than the classified
traffic will be redirected to the new
egress physical port. The value of this
field sets new egress port.rw INTEGER .1.3.6.1.4.1.89.88.9.1.11 |
rlQosClassMapCopyPortIf value not zero, than the classified
traffic will be copied to the desination
copy port. The value of this field sets
desination copy port.rw INTEGER .1.3.6.1.4.1.89.88.9.1.12 |
rlQosClassMapStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.9.1.13 |
rlQosClassMapMatch3Match ACL 3 pointer.rw INTEGER .1.3.6.1.4.1.89.88.9.1.14 |
rlQosPolicerTableThis table specifies All the Policers in the system Information SEQUENCE OF RlQosPolicerEntry .1.3.6.1.4.1.89.88.10 |
rlQosPolicerEntryEach entry in this table describes one policer.
The information includes: Policer name, Policer type, Committed Rate,
Committed Burst, Out-of-Profile Action.
The index is sequential integer represent by rlQosPolicerIndex RlQosPolicerEntry .1.3.6.1.4.1.89.88.10.1 |
rlQosPolicerIndexPolicer Index. INTEGER .1.3.6.1.4.1.89.88.10.1.1 |
rlQosPolicerNameName of the Policer.rw DisplayString .1.3.6.1.4.1.89.88.10.1.2 |
rlQosPolicerTypePolicer typerw PolicerType .1.3.6.1.4.1.89.88.10.1.3 |
rlQosPolicerCirCommitted rate value.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.89.88.10.1.4 |
rlQosPolicerCbsCommitted rate Value.rw Unsigned32 UNITS "bytes" .1.3.6.1.4.1.89.88.10.1.5 |
rlQosPolicerActionOut of profile Action.rw PolicerAction .1.3.6.1.4.1.89.88.10.1.6 |
rlQosPolicerCasPointerRemValPointer to use whan the type is
cascade policer. 0-means no cascade policer. It can also be
Remark value in case of explicit remarkrw INTEGER .1.3.6.1.4.1.89.88.10.1.7 |
rlQosPolicerStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.10.1.8 |
rlQosPolicyMapTableThis table specifies Policy Map Table Information SEQUENCE OF RlQosPolicyMapEntry .1.3.6.1.4.1.89.88.11 |
rlQosPolicyMapEntryEach entry in this table describes one policy map.
The information includes: Index, Policy Map name,
Up to 6 class map names.
The index is sequential integer represent by rlQosPolicerIndex RlQosPolicyMapEntry .1.3.6.1.4.1.89.88.11.1 |
rlQosPolicyMapIndexPolicy map Index. INTEGER .1.3.6.1.4.1.89.88.11.1.1 |
rlQosPolicyMapNamePolicy map Name.rw DisplayString .1.3.6.1.4.1.89.88.11.1.2 |
rlQosPolicyMapStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.11.1.3 |
rlQosPolicyClassRefTableThis table specifies The relationship
between policy map to class map SEQUENCE OF RlQosPolicyClassRefEntry .1.3.6.1.4.1.89.88.12 |
rlQosPolicyClassRefEntryEach entry in this table describes the connection
between class-map entry to policy map by using pointers.
The index is Class map pointer
represent by rlQosPolicyClassRefClassPointer RlQosPolicyClassRefEntry .1.3.6.1.4.1.89.88.12.1 |
rlQosPolicyClassRefClassPointerThe Index is the Class-map pointer INTEGER .1.3.6.1.4.1.89.88.12.1.1 |
rlQosPolicyClassRefPolicyPointerPolicy map index Pointerrw INTEGER .1.3.6.1.4.1.89.88.12.1.2 |
rlQosPolicyClassRefStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.12.1.3 |
rlQosIfPolicyTableThis table specifies for each interface
the Policy Map attach to it SEQUENCE OF RlQosIfPolicyEntry .1.3.6.1.4.1.89.88.13 |
rlQosIfPolicyEntryEach entry in this table describes what policy
Map attached to specific Interface.
The index is Interface Index represent by rlIfIndex and
the interface type represent by rlIfType RlQosIfPolicyEntry .1.3.6.1.4.1.89.88.13.1 |
rlIfIndexInterface Index. INTEGER .1.3.6.1.4.1.89.88.13.1.1 |
rlIfTypeInterface Type(vlan/port). InterfaceType .1.3.6.1.4.1.89.88.13.1.2 |
rlQosIfPolicyMapPointerInPolicy map pointer Input.rw INTEGER .1.3.6.1.4.1.89.88.13.1.3 |
rlQosIfPolicyMapPointerOutPolicy map pointer Output.rw INTEGER .1.3.6.1.4.1.89.88.13.1.4 |
rlQosIfTrustActiveInterface Basic Mode Trust is active or not .rw BinaryStatus .1.3.6.1.4.1.89.88.13.1.5 |
rlQosPortShaperStatusIf there is shaper on the portrw BinaryStatus .1.3.6.1.4.1.89.88.13.1.6 |
rlQosCirPortShaperThe CIR for the port shaper.
N/A when the shper is disabledrw INTEGER UNITS "bps" .1.3.6.1.4.1.89.88.13.1.7 |
rlQosCbsPortShaperThe CBS for the port shaper.
N/A when the shper is disabledrw INTEGER UNITS "bytes" .1.3.6.1.4.1.89.88.13.1.8 |
rlQosIfProfilePointerInterface Profile name pointer.rw DisplayString .1.3.6.1.4.1.89.88.13.1.9 |
rlQosQueueProfilePointerQueue Profile name pointer.rw DisplayString .1.3.6.1.4.1.89.88.13.1.10 |
rlQosQueueShapeProfilePointerQueue shape Profile pointer.rw INTEGER .1.3.6.1.4.1.89.88.13.1.11 |
rlQosAclDefaultActionWhen one ACL is enterd then what to do for the last rull.rw AclDefaultAction .1.3.6.1.4.1.89.88.13.1.12 |
rlQosIfPolicyMapStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.13.1.13 |
rlQosIfAclInIndex of an ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied.rw INTEGER .1.3.6.1.4.1.89.88.13.1.14 |
rlQosIfAclOutIndex of an ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied.rw INTEGER .1.3.6.1.4.1.89.88.13.1.15 |
rlQosIfPolicerInIndex of an Policer in the rlQosPolicerTable, which is applied
to the ingress of an interface.
0 - means no Policer applied.rw INTEGER .1.3.6.1.4.1.89.88.13.1.16 |
rlQosPortRateLimitStatusIf there is Rate limit on the portrw BinaryStatus .1.3.6.1.4.1.89.88.13.1.17 |
rlQosCirPortRateLimitThe CIR for the port rate limit.
N/A when the Rate limit is disabledrw INTEGER UNITS "bps" .1.3.6.1.4.1.89.88.13.1.18 |
rlQosCbsPortRateLimitThe CBS for the port Rate limit.
N/A when the Rate limit is disabledrw INTEGER UNITS "bytes" .1.3.6.1.4.1.89.88.13.1.19 |
rlQosIfIpv6AclInIndex of an IPv6 ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied.rw INTEGER .1.3.6.1.4.1.89.88.13.1.20 |
rlQosIfIpv6AclOutIndex of an IPv6 ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied.rw INTEGER .1.3.6.1.4.1.89.88.13.1.21 |
rlQosIfProfileCfgTableThis table specifies for each Queue the Tail
Drop or WRED parameters and the EF of WRR
parameters. SEQUENCE OF RlQosIfProfileCfgEntry .1.3.6.1.4.1.89.88.14 |
rlQosIfProfileCfgEntryEach entry in this table describes one queue
parameters: Tail-drop threshold for drop precedence
0,1,3 and the WRED min-max threshold and the probability
factor for Drop precedence 0,1,2 and the WRED Q factor
and the EF priority and the WRR weight.
The index is Interface Index represent by rlIfProfileName
and queue-id represent by rlQosQueueId RlQosIfProfileCfgEntry .1.3.6.1.4.1.89.88.14.1 |
rlIfProfileNameInterface Index. DisplayString .1.3.6.1.4.1.89.88.14.1.1 |
rlQosQueueIdQueue id Index. INTEGER .1.3.6.1.4.1.89.88.14.1.2 |
rlQosTdThersholdDp0Tail Drop Threshold for Drop Precedence 0.rw INTEGER .1.3.6.1.4.1.89.88.14.1.3 |
rlQosTdThersholdDp1Tail Drop Threshold for Drop Precedence 1.rw INTEGER .1.3.6.1.4.1.89.88.14.1.4 |
rlQosTdThersholdDp2Tail Drop Threshold for Drop Precedence 2.rw INTEGER .1.3.6.1.4.1.89.88.14.1.5 |
rlQosRedMinDp0WRED Min Threshold for Drop Precedence 2.rw INTEGER .1.3.6.1.4.1.89.88.14.1.6 |
rlQosRedMaxDp0WRED Max Threshold for Drop Precedence 0.rw INTEGER .1.3.6.1.4.1.89.88.14.1.7 |
rlQosRedProbDp0WRED probability for Drop Precedence 0.rw INTEGER .1.3.6.1.4.1.89.88.14.1.8 |
rlQosRedMinDp1WRED Min Threshold for Drop Precedence 2.rw INTEGER .1.3.6.1.4.1.89.88.14.1.9 |
rlQosRedMaxDp1WRED Max Threshold for Drop Precedence 1.rw INTEGER .1.3.6.1.4.1.89.88.14.1.10 |
rlQosRedProbDp1WRED probability for Drop Precedence 1.rw INTEGER .1.3.6.1.4.1.89.88.14.1.11 |
rlQosRedMinDp2WRED Min Threshold for Drop Precedence 2.rw INTEGER .1.3.6.1.4.1.89.88.14.1.12 |
rlQosRedMaxDp2WRED Max Threshold for Drop Precedence 2.rw INTEGER .1.3.6.1.4.1.89.88.14.1.13 |
rlQosRedProbDp2WRED probability for Drop Precedence 2.rw INTEGER .1.3.6.1.4.1.89.88.14.1.14 |
rlQosRedQweightQ factor for WRED.rw INTEGER .1.3.6.1.4.1.89.88.14.1.15 |
rlQosIfprofileStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.14.1.16 |
rlQosDscpMutationTableThis table specifies The DSCP
Mutation table SEQUENCE OF RlQosDscpMutationEntry .1.3.6.1.4.1.89.88.15 |
rlQosDscpMutationEntryEach entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlQosOldDscp RlQosDscpMutationEntry .1.3.6.1.4.1.89.88.15.1 |
rlQosOldDscpOld DSCP. INTEGER .1.3.6.1.4.1.89.88.15.1.1 |
rlQosNewDscpNew DSCP.rw INTEGER .1.3.6.1.4.1.89.88.15.1.2 |
rlQosDscpRemarkTableThis table specifies The DSCP
Remark table SEQUENCE OF RlQosDscpRemarkEntry .1.3.6.1.4.1.89.88.16 |
rlQosDscpRemarkEntryEach entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlQosOldDscp RlQosDscpRemarkEntry .1.3.6.1.4.1.89.88.16.1 |
rlQosRmOldDscpOld DSCP. INTEGER .1.3.6.1.4.1.89.88.16.1.1 |
rlQosRmNewDscpNew DSCP.rw INTEGER .1.3.6.1.4.1.89.88.16.1.2 |
rlQosCosQueueTableThis table specifies The Cos
to queue map table SEQUENCE OF RlQosCosQueueEntry .1.3.6.1.4.1.89.88.17 |
rlQosCosQueueEntryEach entry in this table describes queue ID.
The index is CoS represent by rlQosCosIndex RlQosCosQueueEntry .1.3.6.1.4.1.89.88.17.1 |
rlQosCosIndexCoS value (0-7). INTEGER .1.3.6.1.4.1.89.88.17.1.1 |
rlQosCosQueueIdQueue ID.rw INTEGER .1.3.6.1.4.1.89.88.17.1.2 |
rlQosDscpQueueTableThis table specifies The DSCP
to Queue map table SEQUENCE OF RlQosDscpQueueEntry .1.3.6.1.4.1.89.88.18 |
rlQosDscpQueueEntryEach entry in this table describes The
Queue Number.
The index is DSCP represent by rlQosDscpIndex RlQosDscpQueueEntry .1.3.6.1.4.1.89.88.18.1 |
rlQosDscpIndexDSCP value. INTEGER .1.3.6.1.4.1.89.88.18.1.1 |
rlQosQueueNumQueue Number.rw INTEGER .1.3.6.1.4.1.89.88.18.1.2 |
rlQosTcpPortQueueTableThis table specifies TCP
Port to Queue map table SEQUENCE OF RlQosTcpPortQueueEntry .1.3.6.1.4.1.89.88.19 |
rlQosTcpPortQueueEntryEach entry in this table describes The
Queue Number.
The index is TCP/UDP port represent by rlQosTcpUdpPort RlQosTcpPortQueueEntry .1.3.6.1.4.1.89.88.19.1 |
rlQosTcpPortTCP port number. INTEGER .1.3.6.1.4.1.89.88.19.1.1 |
rlQosTcpQueueValueQueue Number.rw INTEGER .1.3.6.1.4.1.89.88.19.1.2 |
rlQosTcpPortQueueStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.19.1.3 |
rlQosUdpPortQueueTableThis table specifies UDP
Port to Queue map table SEQUENCE OF RlQosUdpPortQueueEntry .1.3.6.1.4.1.89.88.20 |
rlQosUdpPortQueueEntryEach entry in this table describes The
Queue Number.
The index is UDP port represent by rlQosTcpUdpPort RlQosUdpPortQueueEntry .1.3.6.1.4.1.89.88.20.1 |
rlQosUdpPortUDP port number. INTEGER .1.3.6.1.4.1.89.88.20.1.1 |
rlQosUdpQueueValueQueue value.rw INTEGER .1.3.6.1.4.1.89.88.20.1.2 |
rlQosUdpPortQueueStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.20.1.3 |
rlQosEfManageTableThis table specifies UDP
Port to DSCP map table SEQUENCE OF RlQosEfManageEntry .1.3.6.1.4.1.89.88.21 |
rlQosEfManageEntryThis Table describes The
EF management for the system.
The index is UDP port represent by rlQosEfQueueId RlQosEfManageEntry .1.3.6.1.4.1.89.88.21.1 |
rlQosEfQueueIdQueue-ID. INTEGER .1.3.6.1.4.1.89.88.21.1.1 |
rlQosEfStateEnable/disablerw BinaryStatus .1.3.6.1.4.1.89.88.21.1.2 |
rlQosEfPriorityThe priority of the queuerw INTEGER .1.3.6.1.4.1.89.88.21.1.3 |
rlQosQueueProfileTableThis table describes the queue managment profiles SEQUENCE OF RlQosQueueProfileEntry .1.3.6.1.4.1.89.88.22 |
rlQosQueueProfileEntryEach entry in this table describes The
queue managment profile Value.
The index is profile name represent by rlQueueProfileName RlQosQueueProfileEntry .1.3.6.1.4.1.89.88.22.1 |
rlQueueProfileNameProfile name for the Queue profile. DisplayString .1.3.6.1.4.1.89.88.22.1.1 |
rlQosTypeQueue1EF or WRRrw QueueType .1.3.6.1.4.1.89.88.22.1.2 |
rlQosValueQueue1for EF read-only for wrr the weightrw INTEGER .1.3.6.1.4.1.89.88.22.1.3 |
rlQosTypeQueue2EF or WRRrw QueueType .1.3.6.1.4.1.89.88.22.1.4 |
rlQosValueQueue2for EF read-only for wrr the weightrw INTEGER .1.3.6.1.4.1.89.88.22.1.5 |
rlQosTypeQueue3EF or WRRrw QueueType .1.3.6.1.4.1.89.88.22.1.6 |
rlQosValueQueue3for EF read-only for wrr the weightrw INTEGER .1.3.6.1.4.1.89.88.22.1.7 |
rlQosTypeQueue4EF or WRRrw QueueType .1.3.6.1.4.1.89.88.22.1.8 |
rlQosValueQueue4for EF read-only for wrr the weightrw INTEGER .1.3.6.1.4.1.89.88.22.1.9 |
rlQosTypeQueue5EF or WRRrw QueueType .1.3.6.1.4.1.89.88.22.1.10 |
rlQosValueQueue5for EF read-only for wrr the weightrw INTEGER .1.3.6.1.4.1.89.88.22.1.11 |
rlQosTypeQueue6EF or WRRrw QueueType .1.3.6.1.4.1.89.88.22.1.12 |
rlQosValueQueue6for EF read-only for wrr the weightrw INTEGER .1.3.6.1.4.1.89.88.22.1.13 |
rlQosTypeQueue7EF or WRRrw QueueType .1.3.6.1.4.1.89.88.22.1.14 |
rlQosValueQueue7for EF read-only for wrr the weightrw INTEGER .1.3.6.1.4.1.89.88.22.1.15 |
rlQosTypeQueue8EF or WRRrw QueueType .1.3.6.1.4.1.89.88.22.1.16 |
rlQosValueQueue8for EF read-only for wrr the weightrw INTEGER .1.3.6.1.4.1.89.88.22.1.17 |
rlQosQueueProfileStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.22.1.18 |
rlQosNumOfIfConnectionshow many time this entry connected to the if policy tablero INTEGER .1.3.6.1.4.1.89.88.22.1.19 |
rlQosQueueShapeProfileTableThis table specifies the queue shaper profile SEQUENCE OF RlQosQueueShapeProfileEntry .1.3.6.1.4.1.89.88.23 |
rlQosQueueShapeProfileEntryEach entry in this table describes The
shaper profile for all queues.
The index sequencial index represent by rlQosQueueShapeIndex RlQosQueueShapeProfileEntry .1.3.6.1.4.1.89.88.23.1 |
rlQosQueueShapeIndexProfile Index. INTEGER .1.3.6.1.4.1.89.88.23.1.1 |
rlQosCirQueue1CIR for Queue1 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.2 |
rlQosCbsQueue1CBS for Queue1 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.3 |
rlQosCirQueue2CIR for Queue2 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.4 |
rlQosCbsQueue2CBS for Queue2 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.5 |
rlQosCirQueue3CIR for Queue3 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.6 |
rlQosCbsQueue3CBS for Queue3 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.7 |
rlQosCirQueue4CIR for Queue4 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.8 |
rlQosCbsQueue4CBS for Queue4 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.9 |
rlQosCirQueue5CIR for Queue5 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.10 |
rlQosCbsQueue5CBS for Queue5 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.11 |
rlQosCirQueue6CIR for Queue6 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.12 |
rlQosCbsQueue6CBS for Queue6 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.13 |
rlQosCirQueue7CIR for Queue7 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.14 |
rlQosCbsQueue7CBS for Queue7 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.15 |
rlQosCirQueue8CIR for Queue8 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.16 |
rlQosCbsQueue8CBS for Queue8 0 for not activerw INTEGER .1.3.6.1.4.1.89.88.23.1.17 |
rlQosQueueShapeProfileStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.23.1.18 |
rlQosAclCounterTableThe table is used to show statistics for
ACL applied on an interface. SEQUENCE OF RlQosAclCounterEntry .1.3.6.1.4.1.89.88.24 |
rlQosAclCounterEntryThis entry shows value of conter for a
particular ACE of an ACL. RlQosAclCounterEntry .1.3.6.1.4.1.89.88.24.1 |
rlQosAclCounterInterfaceInterface Index on which ACL is applied.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.88.24.1.1 |
rlQosAclCounterAclIndexIndex of ACL, which was applied on the IfIndex.ro INTEGER .1.3.6.1.4.1.89.88.24.1.2 |
rlQosAclCounterAceIndexIndex of ACE, which is belong to an ACL.ro INTEGER .1.3.6.1.4.1.89.88.24.1.3 |
rlQosAclCounterValueThe value of the ACE counter.
For Broadcom ASICs it shows number
of matched packets.
For Marvel ASICs -TBD.ro Counter32 .1.3.6.1.4.1.89.88.24.1.4 |
rlQosFreeIndexesTableThe table is used to get free indexes of tables to create
new entries. The algorithm for free indexes depends on
table's type:
Tuple table - first free index.
Offset table - first free index.
ACE table - last used index + ACE indexes delta.
ACL table - first free index.
Class Map table - last used index + Class Map indexes delta.
Policy Map table - first free index.
Policer Table - first free index.
The ACE indexes delta and Class Map indexes delta are used
to supply QoS MIB user easy insert entry capabilities.
Values of these deltas depend on the MIB implementation.
The 'Get and increment' approach is used in all cases. SEQUENCE OF RlQosFreeIndexesEntry .1.3.6.1.4.1.89.88.25 |
rlQosFreeIndexesEntryThe entry is used to get free index for particular table. RlQosFreeIndexesEntry .1.3.6.1.4.1.89.88.25.1 |
rlQosFreeIndexesTableIdIdentification of the table, for which free index
is retrieved.ro Enumeration .1.3.6.1.4.1.89.88.25.1.1 |
rlQosFreeIndexesValueFree index for table. 0 means no free entries.ro INTEGER .1.3.6.1.4.1.89.88.25.1.2 |
rlQosNamesToIndexesTableThe table is used to get the ACL,Class-Map and Policy-Map
indexes from the name. SEQUENCE OF RlQosNamesToIndexesEntry .1.3.6.1.4.1.89.88.26 |
rlQosNamesToIndexesEntryThe entry is used to get index form particular name and table type. RlQosNamesToIndexesEntry .1.3.6.1.4.1.89.88.26.1 |
rlQosNamesToIndexesTableIdIdentification of the table, for which the index
is retrieved. Enumeration .1.3.6.1.4.1.89.88.26.1.1 |
rlQosNamesToIndexesNameThe name of the entry DisplayString .1.3.6.1.4.1.89.88.26.1.2 |
rlQosNamesToIndexesValuethe index for tablero INTEGER .1.3.6.1.4.1.89.88.26.1.3 |
rlQosStackControlQueueThis scalar object defines queue ID, which is
used for stack control information transfer.
For standalone systems the scalar value equals 0.
This scalar object can be used for warning messages
when users assign a QoS map item, or a Class to the
stack control queue.ro INTEGER .1.3.6.1.4.1.89.88.27 |
rlQosStackControlCosThis scalar object defines CoS (VPT), which is used
for stack control information transfer.
For standalone systems the scalar value equals 8
(not valid for VPT).
This scalar object can be used for warning messages
when users assign a stack control CoS to a non-stacking
control queue.ro INTEGER .1.3.6.1.4.1.89.88.28 |
rlQosCosQueueDefaultMapTableThe table is used to set default 802.1p map (vpt to queue) SEQUENCE OF RlQosCosQueueDefaultMapEntry .1.3.6.1.4.1.89.88.29 |
rlQosCosQueueDefaultMapEntryThe entry is used to get index form particular name and table type. RlQosCosQueueDefaultMapEntry .1.3.6.1.4.1.89.88.29.1 |
rlQosCosQueueDefaultMapVptvlan priority tag , 3 bits of priority which determine
the service class.ro INTEGER .1.3.6.1.4.1.89.88.29.1.1 |
rlQosCosQueueDefaultMapQueueIdthe queue id vary from the first queue id to Max Number of queues supportedro INTEGER .1.3.6.1.4.1.89.88.29.1.2 |
rlQosPredefBlockAclTableThe table is used apply predefined ACLs to interfaces.
Predefined ACLs is ACL to filter particular protocol or
protocol's family. These ACL may operate simultaneously
with IP and MAC ACLs. SEQUENCE OF RlQosPredefBlockAclEntry .1.3.6.1.4.1.89.88.30 |
rlQosPredefBlockAclEntryThe entry is used to apply predefined ACLs to the interface. RlQosPredefBlockAclEntry .1.3.6.1.4.1.89.88.30.1 |
rlQosPredefBlockAclIfIndexIfIndex of port/trunk or VLAN tag of VLAN
on which predefined ACLa will be configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.89.88.30.1.1 |
rlQosPredefBlockAclIfTypeInterface Type(vlan/port). InterfaceType .1.3.6.1.4.1.89.88.30.1.2 |
rlQosPredefBlockAclMaskThis bitmap defines predefined ACL which are applied
on an interface. The table below defines bitmasks for
supported predefined ACL.
Protocol/Family bitmask Description
=====================================================
LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated
NetBuei/NetBios frames
IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated
NetBuei/NetBios framesrw Bits .1.3.6.1.4.1.89.88.30.1.3 |
rlQosPredefBlockAclStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.30.1.4 |
rlQosAceTidxTableThis table specifies ACE table with two index information SEQUENCE OF RlQosAceTidxEntry .1.3.6.1.4.1.89.88.31 |
rlQosAceTidxEntryEach entry in this table describes one Classifier Element.
The information includes: Action the ACE's Type the up to 8 tuples
pointers. The index is sequential integer represent by
rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index RlQosAceTidxEntry .1.3.6.1.4.1.89.88.31.1 |
rlQosAceTidxAclIndexAn arbitrary incremental Index
for the ACL ACE connection. INTEGER .1.3.6.1.4.1.89.88.31.1.1 |
rlQosAceTidxIndexAn arbitrary incremental Index
for the ACE table. INTEGER .1.3.6.1.4.1.89.88.31.1.2 |
rlQosAceTidxActionACE Action to take.rw AceActionType .1.3.6.1.4.1.89.88.31.1.3 |
rlQosAceTidxTypeACE Typerw AceObjectType .1.3.6.1.4.1.89.88.31.1.4 |
rlQosAceTidxTuple1ACE Tuple pointer.rw INTEGER .1.3.6.1.4.1.89.88.31.1.5 |
rlQosAceTidxTuple2ACE Tuple pointer.rw INTEGER .1.3.6.1.4.1.89.88.31.1.6 |
rlQosAceTidxTuple3ACE Tuple pointer.rw INTEGER .1.3.6.1.4.1.89.88.31.1.7 |
rlQosAceTidxTuple4ACE Tuple pointer.rw INTEGER .1.3.6.1.4.1.89.88.31.1.8 |
rlQosAceTidxTuple5ACE Tuple pointer.rw INTEGER .1.3.6.1.4.1.89.88.31.1.9 |
rlQosAceTidxTuple6ACE Tuple pointer.rw INTEGER .1.3.6.1.4.1.89.88.31.1.10 |
rlQosAceTidxTuple7ACE Tuple pointer.rw INTEGER .1.3.6.1.4.1.89.88.31.1.11 |
rlQosAceTidxTuple8ACE Tuple pointer.rw INTEGER .1.3.6.1.4.1.89.88.31.1.12 |
rlQosAceTidxAccountACE Accounting state.
When set to 'enabled' than appropriate statistic's
counter is provided for an ACE.
For Broadcom ASICs this counter shows number of
matched with ACE criteria packets.
For Dlink ASICs TBD.rw BinaryStatus .1.3.6.1.4.1.89.88.31.1.13 |
rlQosAceTidxStatusThe status of a table entry.
It is used to delete/Add an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.31.1.14 |
rlQosAceTidxTimeRangeACE time range name.rw DisplayString( SIZE .1.3.6.1.4.1.89.88.31.1.15 |
rlQosAceTidxTimeRangeIsActiveACE time range is rule active state shows is ACE currently active or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.88.31.1.16 |
rlQosMibVersionMIB's version, the current version is 11
1 - original version
2 - Add new two MIB's items.
- rlQosAceTidxTable - Ace table with two indexes
- rlQosMibVersion.
Change the unit in Policer table from bps to kbps
3 - Add new MIB's value for Textual convention QosObjectMode
4 - Add new MIBs rlQosDscpQueueDefaultMapTable
5 - Add new advanced action : trustCosDscp
6 - Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType
Add ip-ICMP,ip-IGMP To AceObjectType
Add vpt,ethertype To ClassOffsetType
7- Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit
to rlQosIfPolicyTable
8 - Add Added rlQosDscpToDpTable
9 - Add statistics
10 - Add innerVlan to ClassOffsetType And inner-vlan to ClassTupleType
11 - Added rlQosCPUSafeGuardEnablero INTEGER .1.3.6.1.4.1.89.88.32 |
rlQosDscpQueueDefaultMapTableThe table is used to set default dscp to queue map SEQUENCE OF RlQosDscpQueueDefaultMapEntry .1.3.6.1.4.1.89.88.33 |
rlQosDscpQueueDefaultMapEntryThe entry is used to get index form particular name and table type. RlQosDscpQueueDefaultMapEntry .1.3.6.1.4.1.89.88.33.1 |
rlQosDscpQueueDefaultMapDscpdscp , 6 bits of priority which determine
the service class.ro INTEGER .1.3.6.1.4.1.89.88.33.1.1 |
rlQosDscpQueueDefaultMapQueueIdthe queue id vary from the first queue id to Max Number of queues supportedro INTEGER .1.3.6.1.4.1.89.88.33.1.2 |
rlQosDscpToDpTableThis table specifies The DSCP
To Dp table SEQUENCE OF RlQosDscpToDpEntry .1.3.6.1.4.1.89.88.34 |
rlQosDscpToDpEntryEach entry in this table describes the new
DP for the packet.
The index is DSCP represent by rlQosDscp RlQosDscpToDpEntry .1.3.6.1.4.1.89.88.34.1 |
rlQosDscpPacket DSCP. INTEGER .1.3.6.1.4.1.89.88.34.1.1 |
rlQosDpNew DP.rw INTEGER .1.3.6.1.4.1.89.88.34.1.2 |
rlQosStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.89.88.35 |
rlQosPortPolicyStatisticsTableThis table specifies statistics counter for policies with specific actions SEQUENCE OF RlQosPortPolicyStatisticsEntry .1.3.6.1.4.1.89.88.35.1 |
rlQosPortPolicyStatisticsEntryEach entry in this table describes counter per port.
The index is port represent by rlIfIndex.
In each entry represents counter, it's type , it's size and whether it's enabled. RlQosPortPolicyStatisticsEntry .1.3.6.1.4.1.89.88.35.1.1 |
rlQosPortPolicyStatisticsCntrTypeCounter type.rw StatisticsCntrType .1.3.6.1.4.1.89.88.35.1.1.1 |
rlQosPortPolicyStatisticsCntrNumOfBitsCounter size in bits.ro StatisticsCntrNumOfBitsType .1.3.6.1.4.1.89.88.35.1.1.2 |
rlQosPortPolicyStatisticsEnableCountingIndication whether the counter is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.1.1.3 |
rlQosPortPolicyStatisticsCounterValueCounter value.ro Counter64 .1.3.6.1.4.1.89.88.35.1.1.4 |
rlQosSinglePolicerStatisticsTableThis table specifies statistics counters per QoS meter SEQUENCE OF RlQosSinglePolicerStatisticsEntry .1.3.6.1.4.1.89.88.35.2 |
rlQosSinglePolicerStatisticsEntryEach entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether the counter for the meter is enabled and two counters value - for in-profile bytes and for out-of-profile bytes. RlQosSinglePolicerStatisticsEntry .1.3.6.1.4.1.89.88.35.2.1 |
rlQosSinglePolicerStatisticsInProfileCounterValueCounter value of in profile traffic.ro Counter64 .1.3.6.1.4.1.89.88.35.2.1.1 |
rlQosSinglePolicerStatisticsInProfileCntrNumOfBitsCounter size in bits for in profile counter.ro StatisticsCntrNumOfBitsType .1.3.6.1.4.1.89.88.35.2.1.2 |
rlQosSinglePolicerStatisticsOutProfileCounterValueCounter value of Out Profile traffic.ro Counter64 .1.3.6.1.4.1.89.88.35.2.1.3 |
rlQosSinglePolicerStatisticsOutProfileCntrNumOfBitsCounter size in bits for out profile counter.ro StatisticsCntrNumOfBitsType .1.3.6.1.4.1.89.88.35.2.1.4 |
rlQosSinglePolicerStatisticsStatusThe status of a table entry.
It is used to delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.2.1.5 |
rlQosAggregatePolicerStatisticsTableThis table specifies statistics counters per QoS aggregate meter SEQUENCE OF RlQosAggregatePolicerStatisticsEntry .1.3.6.1.4.1.89.88.35.3 |
rlQosAggregatePolicerStatisticsEntryEach entry in this table describes counter per aggregate meter.
The index is rlQosPolicerIndex.
In each entry there are fields representing whether the counter for the
meter is enabled and three counters values - for green, yellow and red
profiles bytes. RlQosAggregatePolicerStatisticsEntry .1.3.6.1.4.1.89.88.35.3.1 |
rlQosAggregatePolicerStatisticsInProfileCounterValueCounter value of In Profile amount of bytes.ro Counter64 .1.3.6.1.4.1.89.88.35.3.1.1 |
rlQosAggregatePolicerStatisticsInProfileCntrNumOfBitsCounter size in bits for In Profile .ro StatisticsCntrNumOfBitsType .1.3.6.1.4.1.89.88.35.3.1.2 |
rlQosAggregatePolicerStatisticsOutProfileCounterValueCounter value of Out Profile amount of bytes.ro Counter64 .1.3.6.1.4.1.89.88.35.3.1.3 |
rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBitsCounter size in bits for Out Profile.ro StatisticsCntrNumOfBitsType .1.3.6.1.4.1.89.88.35.3.1.4 |
rlQosAggregatePolicerStatisticsStatusThe status of a table entry.
It is used to delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.3.1.5 |
rlQosOutQueueStatisticsTableThis table specifies statistics counters per VLAN/Port/Queue/Drop Precedence SEQUENCE OF RlQosOutQueueStatisticsEntry .1.3.6.1.4.1.89.88.35.4 |
rlQosOutQueueStatisticsEntryEach entry in this table describes counter per any permutation of
Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'.
The index is port represent by rlQosOutQueueStatisticsCountrID.
In each entry there are fields representing
whether the counter is enabled and counters value. RlQosOutQueueStatisticsEntry .1.3.6.1.4.1.89.88.35.4.1 |
rlQosOutQueueStatisticsCountrIDCounter id, the key of the table.rw INTEGER .1.3.6.1.4.1.89.88.35.4.1.1 |
rlQosOutQueueStatisticsIfIndexListPort for which the flow is counted.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.89.88.35.4.1.2 |
rlQosOutQueueStatisticsPortAllIndication for whether the port is configured as range of all the portsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.4.1.3 |
rlQosOutQueueStatisticsVlanVLAN for which the flow is counted.rw INTEGER .1.3.6.1.4.1.89.88.35.4.1.4 |
rlQosOutQueueStatisticsVlanAllIndication for whether the VLAN is configured as range of all the VLANSrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.4.1.5 |
rlQosOutQueueStatisticsQueueQueue for which the flow is counted.rw INTEGER .1.3.6.1.4.1.89.88.35.4.1.6 |
rlQosOutQueueStatisticsQueueAllIndication for whether the queue is configured as range of all the Queuesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.4.1.7 |
rlQosOutQueueStatisticsDPDrop Precedence for which the flow is counted.rw StatisticsDPType (DLINK-3100-POLICY-MIB) .1.3.6.1.4.1.89.88.35.4.1.8 |
rlQosOutQueueStatisticsDPAllIndication for whether the DP is configured as range of all the DPsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.4.1.9 |
rlQosOutQueueStatisticsCounterTailDropValueThe counter for tail dropped value.ro Counter64 .1.3.6.1.4.1.89.88.35.4.1.10 |
rlQosOutQueueStatisticsCounterAllValueThe counter for all traffic value.ro Counter64 .1.3.6.1.4.1.89.88.35.4.1.11 |
rlQosOutQueueStatisticsCntrNumOfBitsCounter size in bits for the counter.ro StatisticsCntrNumOfBitsType .1.3.6.1.4.1.89.88.35.4.1.12 |
rlQosOutQueueStatisticsStatusThe status of a table entry.
It is used to delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.4.1.13 |
rlQosGlobalStatisticsCntrsTableThis table specifies statistics global counters for specific rules for all ports
that they are connected to SEQUENCE OF RlQosGlobalStatisticsCntrsEntry .1.3.6.1.4.1.89.88.35.5 |
rlQosGlobalStatisticsCntrsEntryEach entry represents global counter. RlQosGlobalStatisticsCntrsEntry .1.3.6.1.4.1.89.88.35.5.1 |
rlQosGlobalStatisticsCntrsTypeCounter type.ro StatisticsCntrType .1.3.6.1.4.1.89.88.35.5.1.1 |
rlQosGlobalStatisticsCntrsNumOfBitsCounter size in bits.ro StatisticsCntrNumOfBitsType .1.3.6.1.4.1.89.88.35.5.1.2 |
rlQosGlobalStatisticsCntrsCounterValueCounter value.ro Counter64 .1.3.6.1.4.1.89.88.35.5.1.3 |
rlQosGlobalStatisticsStatusThe status of a table entry.
It is used to delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.35.5.1.4 |
rlQosClearCountersThis scalar indicates to clear all the counters.rw INTEGER .1.3.6.1.4.1.89.88.35.6 |
rlQosClassifierUtilization OBJECT IDENTIFIER .1.3.6.1.4.1.89.88.36 |
rlQosClassifierUtilizationTableA table containing Classifier utilization information.
Each row represents objects for a particular Unit
present in this system. SEQUENCE OF RlQosClassifierUtilizationEntry .1.3.6.1.4.1.89.88.36.1 |
rlQosClassifierUtilizationEntryA Single entry containing Classifier utilization information. RlQosClassifierUtilizationEntry .1.3.6.1.4.1.89.88.36.1.1 |
rlQosClassifierUtilizationUnitIdThe Unit ID of this Classifier. must be unique per entry.
This is an index into the table. Unsigned32 .1.3.6.1.4.1.89.88.36.1.1.1 |
rlQosClassifierUtilizationPercentThe classifier utilization percentage.ro Unsigned32 .1.3.6.1.4.1.89.88.36.1.1.2 |
rlQosClassifierUtilizationRulesNumberThe classifier utilization number of used rules, in short rules resolution.ro Unsigned32 .1.3.6.1.4.1.89.88.36.1.1.3 |
rlQosClassifierUtilizationSystemThe system classifier utilization percentage.ro Unsigned32 .1.3.6.1.4.1.89.88.36.2 |
rlQosClassifierRulesNumberUtilizationSystemNumber of used rules per system, in short rule resolutionro Unsigned32 .1.3.6.1.4.1.89.88.36.3 |
rlQosPortToProfileMappingTableThis table maps between port and profile SEQUENCE OF RlQosPortToProfileMappingEntry .1.3.6.1.4.1.89.88.37 |
rlQosPortToProfileMappingEntryEach entry in this table describes
mapping between port and profile RlQosPortToProfileMappingEntry .1.3.6.1.4.1.89.88.37.1 |
rlQosPortPort number INTEGER .1.3.6.1.4.1.89.88.37.1.1 |
rlQosProfileNameprofilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.88.37.1.2 |
rlQosTimeBasedAclTableThis table specifies Time Based ACL table SEQUENCE OF RlQosTimeBasedAclEntry .1.3.6.1.4.1.89.88.38 |
rlQosTimeBasedAclEntryEach entry in this table describes the new
time range for ACE.
The index is time range name RlQosTimeBasedAclEntry .1.3.6.1.4.1.89.88.38.1 |
rlQosTimeBasedAclRangeNameName of time range. DisplayString .1.3.6.1.4.1.89.88.38.1.1 |
rlQosTimeBasedAclAbsStartTime of start of absolute time range in following format:
month day year hh:mm
month: 01-12 (January-December)
day: 01-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)rw DisplayString .1.3.6.1.4.1.89.88.38.1.2 |
rlQosTimeBasedAclAbsEndTime of end of absolute time range in following format:
month day year hh:mm
month: 01-12 (January-December)
day: 01-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)rw DisplayString .1.3.6.1.4.1.89.88.38.1.3 |
rlQosTimeBasedAclStatusThe status of a table entry.
It is used to delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.38.1.4 |
rlQosTimeBasedAclPeriodicTableThis table specifies Time Based ACL Periodic table SEQUENCE OF RlQosTimeBasedAclPeriodicEntry .1.3.6.1.4.1.89.88.39 |
rlQosTimeBasedAclPeriodicEntryEach entry in this table describes the new
periodic time range for ACE.
The index is time range index and periodic index RlQosTimeBasedAclPeriodicEntry .1.3.6.1.4.1.89.88.39.1 |
rlQosTimeBasedAclPeriodicNameIndex of time range. DisplayString .1.3.6.1.4.1.89.88.39.1.1 |
rlQosTimeBasedAclPeriodicWeekListThe bitmap allows to user to select periodic time range for several
days at once. The periodic range will be associated with specific days
when corresponding bits will be set. If at least one bit has been set in the
rlQosTimeBasedAclPeriodicList,
the weekday in rlQosTimeBasedAclPeriodicStart and rlQosTimeBasedAclPeriodicEnd
is not relevant and should be set to zero.rw RlQosTimeBasedAclWeekPeriodicList .1.3.6.1.4.1.89.88.39.1.2 |
rlQosTimeBasedAclPeriodicStartTime of start of periodic time range in following format:
weekday hh:mm
weekday: 0-7 (0 means the weekday is not specified,
1-7 are weekdays from Monday to Sunday)
hh: 0-23 (hours)
mm: 0-59 (minutes)
Weekday may be 0 only if periodic time range weekdays were specified in
rlQosTimeBasedAclPeriodicWeekList.rw DisplayString .1.3.6.1.4.1.89.88.39.1.3 |
rlQosTimeBasedAclPeriodicEndTime of end of periodic time range in following format:
weekday hh:mm
weekday: 0-7 (0 means the weekday is not specified,
1-7 are weekdays from Monday to Sunday)
hh: 0-23 (hours)
mm: 0-59 (minutes)
Weekday may be 0 only if periodic time range weekdays were specified in
rlQosTimeBasedAclPeriodicWeekList.rw DisplayString .1.3.6.1.4.1.89.88.39.1.4 |
rlQosTimeBasedAclPeriodicStatusThe status of a table entry.
It is used to delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.88.39.1.5 |
rlQosCPUSafeGuardEnableThis scalar enables/disables CPU Safeguard.rw INTEGER .1.3.6.1.4.1.89.88.40 |
rlQosTcamUpdateSemaphoreThis scalar is used to prevent the dynamic applications to update TCAM resources when
ACL application updates the TCAM.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.88.41 |