DKSF-50-11-X-X-X
Generic MIB for NetPing remote sensing and control
Main OID:
netPing.1.3.6.1.4.1.25728.50
85
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
85 total| Object Name |
|---|
lightcom OBJECT IDENTIFIER .1.3.6.1.4.1.25728 |
netPingGeneric MIB for NetPing remote sensing and control MODULE-IDENTITY .1.3.6.1.4.1.25728.50 |
npTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25728.90 |
npTrapEmailTouser-specified e-mail for NetPing Trap Forwarding Servicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.90.1 |
npReboot OBJECT IDENTIFIER .1.3.6.1.4.1.25728.911 |
npSoftRebootWrite 1 to reboot device after current operations completitionrw INTEGER .1.3.6.1.4.1.25728.911.1 |
npResetStackWrite 1 to re-initialize network stackrw INTEGER .1.3.6.1.4.1.25728.911.2 |
npForcedRebootWrite 1 to immediate forced rebootrw INTEGER .1.3.6.1.4.1.25728.911.3 |
npPwr OBJECT IDENTIFIER .1.3.6.1.4.1.25728.5800 |
npPwrTableWatchdog and outlet/relay control table SEQUENCE OF NpPwrEntry .1.3.6.1.4.1.25728.5800.3 |
npPwrEntryWatchdog and outlet/relay control table row NpPwrEntry .1.3.6.1.4.1.25728.5800.3.1 |
npPwrChannelNThe id of watchdog/power channelro INTEGER .1.3.6.1.4.1.25728.5800.3.1.1 |
npPwrStartResetWrite 1 to start reset On read: 0 - normal operation 1 - reset is active 2 - reboot pause is activerw INTEGER .1.3.6.1.4.1.25728.5800.3.1.2 |
npPwrManualModeMode of power channel 0 - manual off 1 - manual on 2 - watchdogrw Enumeration .1.3.6.1.4.1.25728.5800.3.1.3 |
npPwrResetsCounterCounter of watchdog resets Write 0 to clear.rw INTEGER .1.3.6.1.4.1.25728.5800.3.1.4 |
npPwrRepeatingResetsCounterCounter of continous failed watchdog resetsro INTEGER .1.3.6.1.4.1.25728.5800.3.1.5 |
npPwrMemoWatchdog/power channel memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.5800.3.1.6 |
npIr OBJECT IDENTIFIER .1.3.6.1.4.1.25728.7900 |
npIrCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.25728.7900.1 |
npIrPlayCmdWrite IR command number to send IR commandrw INTEGER .1.3.6.1.4.1.25728.7900.1.1 |
npIrResetWrite 1 to reset IR transiever. After reset, send IR command and check npIrStatus.rw INTEGER .1.3.6.1.4.1.25728.7900.1.2 |
npIrStatusIR transiever statusro Enumeration .1.3.6.1.4.1.25728.7900.1.3 |
npCurLoop OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8300 |
npCurLoopTableCurrent loop sensors Table SEQUENCE OF NpCurLoopEntry .1.3.6.1.4.1.25728.8300.1 |
npCurLoopEntryCurrent loop sensors Table Row NpCurLoopEntry .1.3.6.1.4.1.25728.8300.1.1 |
npCurLoopNIndex of current loop, 1 to max supportedro INTEGER .1.3.6.1.4.1.25728.8300.1.1.1 |
npCurLoopStatusStatus of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Poweredro Enumeration .1.3.6.1.4.1.25728.8300.1.1.2 |
npCurLoopILoop current, mAro INTEGER .1.3.6.1.4.1.25728.8300.1.1.3 |
npCurLoopVVoltage drop on the loop, mVro INTEGER .1.3.6.1.4.1.25728.8300.1.1.4 |
npCurLoopRResistance of the loop, Ohmro INTEGER .1.3.6.1.4.1.25728.8300.1.1.5 |
npCurLoopPowerControl of loop power 0=Off, 1=On, 2=reset by off/on powerrw Enumeration .1.3.6.1.4.1.25728.8300.1.1.7 |
npCurLoopTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8300.2 |
npCurLoopTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8300.2.0 |
npCurLoopTrapStatus of current loop N has changed! NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8300.2.0.1 |
npCurLoopTrapNIndex of current loop, which status has changedro INTEGER .1.3.6.1.4.1.25728.8300.2.1 |
npCurLoopTrapStatusStatus of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Poweredro Enumeration .1.3.6.1.4.1.25728.8300.2.2 |
npCurLoopTrapILoop current, mAro INTEGER .1.3.6.1.4.1.25728.8300.2.3 |
npCurLoopTrapVVoltage drop on the loop, mVro INTEGER .1.3.6.1.4.1.25728.8300.2.4 |
npCurLoopTrapRResistance of the loop, Ohmro INTEGER .1.3.6.1.4.1.25728.8300.2.5 |
npCurLoopTrapPowerStatus of loop power 0=Off, 1=Onrw Enumeration .1.3.6.1.4.1.25728.8300.2.7 |
npRelHumidity OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400 |
npRelHumSensor OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400.2 |
npRelHumSensorValueHRelative humidity value, %ro INTEGER .1.3.6.1.4.1.25728.8400.2.2 |
npRelHumSensorStatusStatus of the Rel.Humidity Sensor One 0=Normal, 1=Error or Sensor isn't connectedro Enumeration .1.3.6.1.4.1.25728.8400.2.3 |
npRelHumSensorValueTSensor temperature, deg.Cro INTEGER (-60..200) .1.3.6.1.4.1.25728.8400.2.4 |
npRelHumSensorStatusHStatus of Relative Humidutyro Enumeration .1.3.6.1.4.1.25728.8400.2.5 |
npRelHumSafeRangeHighRelative Humidity safe range, top margin, %RHro INTEGER .1.3.6.1.4.1.25728.8400.2.7 |
npRelHumSafeRangeLowRelative Humidity safe range, bottom margin, %RHro INTEGER .1.3.6.1.4.1.25728.8400.2.8 |
npRelHumTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400.9 |
npRelHumTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400.9.0 |
npRelHumTrapStatus of Relative Humidity RH sensor has changed! NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.9.0.1 |
npThermo OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8800 |
npThermoTableThermo Sensors Table SEQUENCE OF NpThermoEntry .1.3.6.1.4.1.25728.8800.1 |
npThermoEntryThermo Sensors Table Row NpThermoEntry .1.3.6.1.4.1.25728.8800.1.1 |
npThermoSensorNThe id of temperature sensor, 1 to 8ro INTEGER .1.3.6.1.4.1.25728.8800.1.1.1 |
npThermoValueTemperature, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.1.1.2 |
npThermoStatusTemperature status (0=fault, 1=underheat, 2=normal, 3=overheat)ro Enumeration .1.3.6.1.4.1.25728.8800.1.1.3 |
npThermoLowBottom margin of normal temperature range, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.1.1.4 |
npThermoHighTop margin of normal temperature range, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.1.1.5 |
npThermoMemoT channel memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8800.1.1.6 |
npThermoTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8800.2 |
npThermoTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8800.2.0 |
npThermoTrapStatus of Thermo sensor is changed (crossing of normal temp. range) NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8800.2.0.1 |
npThermoTrapSensorNThe id of temperature sensor, 1 to 8ro INTEGER .1.3.6.1.4.1.25728.8800.2.1 |
npThermoTrapValueTemperature, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.2.2 |
npThermoTrapStatusTemperature status (0=fault, 1=underheat, 2=normal, 3=overheat)ro Enumeration .1.3.6.1.4.1.25728.8800.2.3 |
npThermoTrapLowBottom margin of normal temperature range, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.2.4 |
npThermoTrapHighTop margin of normal temperature range, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.2.5 |
npThermoTrapMemoT channel memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8800.2.6 |
npIo OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900 |
npIoTableDigital Input/output Table SEQUENCE OF NpIoEntry .1.3.6.1.4.1.25728.8900.1 |
npIoEntryDigital Input/output Table Row NpIoEntry .1.3.6.1.4.1.25728.8900.1.1 |
npIoLineNNumber of IO line, from 1 to max supportedro INTEGER .1.3.6.1.4.1.25728.8900.1.1.1 |
npIoLevelInInput level, 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.1.1.2 |
npIoLevelOutOutput level, 0 or 1rw INTEGER .1.3.6.1.4.1.25728.8900.1.1.3 |
npIoMemoIO line memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8900.1.1.6 |
npIoPulseCounterPulse Counter on IO input line (counts positive fronts) Write 0 to reset.rw Counter32 .1.3.6.1.4.1.25728.8900.1.1.9 |
npIoSinglePulseDurationSet duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100msrw INTEGER .1.3.6.1.4.1.25728.8900.1.1.12 |
npIoSinglePulseStartWrite 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDurationrw INTEGER .1.3.6.1.4.1.25728.8900.1.1.13 |
npIoTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900.2 |
npIoTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900.2.0 |
npIoTrapInput state of IO line is changed NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8900.2.0.1 |
npIoTrapLineNTrap data, Number of IO linero INTEGER .1.3.6.1.4.1.25728.8900.2.1 |
npIoTrapLevelInTrap data, new Input level, 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.2.2 |
npIoTrapMemoTrap data, IO line memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8900.2.6 |