DKSF-70-6-X-X-1
AI MIB Summary
The DKSF-70-6-X-X-1 MIB module facilitates remote monitoring and control of NetPing sensing hardware, enabling the retrieval of link status, signal strength, and device operational state via SNMP.
Generic MIB for NetPing remote sensing and control
Main OID:
uniPingServerSolutionV3.1.3.6.1.4.1.25728.70
133
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
133 total| Object Name |
|---|
lightcom OBJECT IDENTIFIER .1.3.6.1.4.1.25728 |
uniPingServerSolutionV3Generic MIB for NetPing remote sensing and control MODULE-IDENTITY .1.3.6.1.4.1.25728.70 |
npTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25728.90 |
npTrapEmailTouser-specified e-mail for NetPing Trap Forwarding Servicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.90.1 |
npReboot OBJECT IDENTIFIER .1.3.6.1.4.1.25728.911 |
npSoftRebootWrite 1 to reboot device after current operations completitionrw INTEGER .1.3.6.1.4.1.25728.911.1 |
npResetStackWrite 1 to re-initialize network stackrw INTEGER .1.3.6.1.4.1.25728.911.2 |
npForcedRebootWrite 1 to immediate forced rebootrw INTEGER .1.3.6.1.4.1.25728.911.3 |
npGsm OBJECT IDENTIFIER .1.3.6.1.4.1.25728.3800 |
npGsmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25728.3800.1 |
npGsmFailedFirmware's GSM module statusro Enumeration .1.3.6.1.4.1.25728.3800.1.1 |
npGsmRegistrationStatus of modem registration in GSM network (AT+CREG? result)ro Enumeration .1.3.6.1.4.1.25728.3800.1.2 |
npGsmStrengthGSM signal strength. 0..31 = 0..100%, 99 = unknown or n/a, 255 = updating inforo INTEGER .1.3.6.1.4.1.25728.3800.1.3 |
npGsmSendSmsUtf8Send arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to preset numbers from SMS setup Cyrillic characters must be in UTF8 encoding.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.3800.1.9 |
npGsmSendSmsWin1251Send arbitrary SMS. Format: [phone_number,phone_number,...] Message One to four destination phone numbers If [] and numbers omitted, mesagge will be sent to preset numbers from SMS setup Cyrillic characters must be in Win1251 encoding.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.3800.1.10 |
npGsmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.3800.2 |
npGsmTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.3800.2.0 |
npGsmTrapGSM modem or SMS firmware problems NOTIFICATION-TYPE .1.3.6.1.4.1.25728.3800.2.0.1 |
npRelay OBJECT IDENTIFIER .1.3.6.1.4.1.25728.5500 |
npRelayTableWatchdog and outlet/relay control table SEQUENCE OF NpRelayEntry .1.3.6.1.4.1.25728.5500.5 |
npRelayEntryRelay/outlet table row NpRelayEntry .1.3.6.1.4.1.25728.5500.5.1 |
npRelayNThe N of output relayro INTEGER .1.3.6.1.4.1.25728.5500.5.1.1 |
npRelayModeControl of relay: -1 - flip between on(1) and off(0) 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - both schedule and watchdog (while switched on by schedule) 5 - logicrw Enumeration .1.3.6.1.4.1.25728.5500.5.1.2 |
npRelayStartResetWrite 1 to start reset (switch relay off for some time)rw INTEGER .1.3.6.1.4.1.25728.5500.5.1.3 |
npRelayMemoRelay memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.5500.5.1.6 |
npRelayStateActual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is onro Enumeration .1.3.6.1.4.1.25728.5500.5.1.15 |
npIr OBJECT IDENTIFIER .1.3.6.1.4.1.25728.7900 |
npIrCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.25728.7900.1 |
npIrPlayCmdWrite IR command number to send IR commandrw INTEGER .1.3.6.1.4.1.25728.7900.1.1 |
npIrResetWrite 1 to reset IR transiever. After reset, send IR command and check npIrStatus.rw INTEGER .1.3.6.1.4.1.25728.7900.1.2 |
npIrStatusIR transiever statusro Enumeration .1.3.6.1.4.1.25728.7900.1.3 |
npSmoke OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8200 |
npSmokeTableSmoke Sensors Table SEQUENCE OF NpSmokeEntry .1.3.6.1.4.1.25728.8200.1 |
npSmokeEntrySmoke Sensors Table Row NpSmokeEntry .1.3.6.1.4.1.25728.8200.1.1 |
npSmokeSensorNThe id of 1Wire Smoke sensor, 1 to 4ro INTEGER .1.3.6.1.4.1.25728.8200.1.1.1 |
npSmokeStatusStatus of Smoke sensorro Enumeration .1.3.6.1.4.1.25728.8200.1.1.2 |
npSmokePowerControls power on Smoke sensor current looprw Enumeration .1.3.6.1.4.1.25728.8200.1.1.3 |
npSmokeResetWrite 1 to switch off for approx. 10s to reset sensorrw INTEGER .1.3.6.1.4.1.25728.8200.1.1.4 |
npSmokeMemoSmoke sensor memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8200.1.1.6 |
npSmokeTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8200.2 |
npSmokeTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8200.2.0 |
npSmokeTrapStatus of 1W Smoke sensor has changed NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8200.2.0.1 |
npSmokeTrapSensorNThe id of 1Wire Smoke sensor, 1 to 4ro INTEGER .1.3.6.1.4.1.25728.8200.2.1 |
npSmokeTrapStatusNew status of Smoke sensorro Enumeration .1.3.6.1.4.1.25728.8200.2.2 |
npSmokeTrapMemoSmoke sensor memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8200.2.6 |
npCurLoop OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8300 |
npCurLoopTableCurrent loop sensors Table SEQUENCE OF NpCurLoopEntry .1.3.6.1.4.1.25728.8300.1 |
npCurLoopEntryCurrent loop sensors Table Row NpCurLoopEntry .1.3.6.1.4.1.25728.8300.1.1 |
npCurLoopNIndex of current loop, 1 to max supportedro INTEGER .1.3.6.1.4.1.25728.8300.1.1.1 |
npCurLoopStatusStatus of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Poweredro Enumeration .1.3.6.1.4.1.25728.8300.1.1.2 |
npCurLoopILoop current, mAro INTEGER .1.3.6.1.4.1.25728.8300.1.1.3 |
npCurLoopVVoltage drop on the loop, mVro INTEGER .1.3.6.1.4.1.25728.8300.1.1.4 |
npCurLoopRResistance of the loop, Ohmro INTEGER .1.3.6.1.4.1.25728.8300.1.1.5 |
npCurLoopPowerControl of loop power 0=Off, 1=On, 2=reset by off/on powerrw Enumeration .1.3.6.1.4.1.25728.8300.1.1.7 |
npCurLoopTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8300.2 |
npCurLoopTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8300.2.0 |
npCurLoopTrapStatus of current loop N has changed! NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8300.2.0.1 |
npCurLoopTrapNIndex of current loop, which status has changedro INTEGER .1.3.6.1.4.1.25728.8300.2.1 |
npCurLoopTrapStatusStatus of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Poweredro Enumeration .1.3.6.1.4.1.25728.8300.2.2 |
npCurLoopTrapILoop current, mAro INTEGER .1.3.6.1.4.1.25728.8300.2.3 |
npCurLoopTrapVVoltage drop on the loop, mVro INTEGER .1.3.6.1.4.1.25728.8300.2.4 |
npCurLoopTrapRResistance of the loop, Ohmro INTEGER .1.3.6.1.4.1.25728.8300.2.5 |
npCurLoopTrapPowerStatus of loop power 0=Off, 1=Onrw Enumeration .1.3.6.1.4.1.25728.8300.2.7 |
npRelHumidity OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400 |
npRelHumTableHumidity+Temperature Sensors Table SEQUENCE OF NpRelHumEntry .1.3.6.1.4.1.25728.8400.1 |
npRelHumEntryHumidity+Temperature Sensors Table Row NpRelHumEntry .1.3.6.1.4.1.25728.8400.1.1 |
npRelHumNIndex of Humidity+Temperature sensor, 1 to max supportedro INTEGER .1.3.6.1.4.1.25728.8400.1.1.1 |
npRelHumValueRelative humidity value, %ro INTEGER .1.3.6.1.4.1.25728.8400.1.1.2 |
npRelHumStatusStatus of Relative Humidutyro Enumeration .1.3.6.1.4.1.25728.8400.1.1.3 |
npRelHumTempValueSensor temperature, deg.Cro INTEGER (-60..200) .1.3.6.1.4.1.25728.8400.1.1.4 |
npRelHumTempStatusStatus of Relative Humidutyro Enumeration .1.3.6.1.4.1.25728.8400.1.1.5 |
npRelHumMemoSensor Memo/Locationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8400.1.1.6 |
npRelHumSafeRangeHighRelative Humidity safe range, top margin, %RHro INTEGER .1.3.6.1.4.1.25728.8400.1.1.7 |
npRelHumSafeRangeLowRelative Humidity safe range, bottom margin, %RHro INTEGER .1.3.6.1.4.1.25728.8400.1.1.8 |
npRelHumTempSafeRangeHighTemperature safe range, top margin, deg.Cro INTEGER (-55..150) .1.3.6.1.4.1.25728.8400.1.1.9 |
npRelHumTempSafeRangeLowTemperature safe range, bottom margin, deg.Cro INTEGER (-55..150) .1.3.6.1.4.1.25728.8400.1.1.10 |
npRelHumTrapData OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400.3 |
npRelHumTrapDataNIndex of Humidity+Temperature sensor, 1 to max supportedro INTEGER .1.3.6.1.4.1.25728.8400.3.1 |
npRelHumTrapDataValueSensor humidity, %RH, or temperature, deg.Cro INTEGER .1.3.6.1.4.1.25728.8400.3.2 |
npRelHumTrapDataStatusStatus of humidity or temperaturero Enumeration .1.3.6.1.4.1.25728.8400.3.4 |
npRelHumTrapDataMemoSensor Memo/Locationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8400.3.6 |
npRelHumTrapDataSafeRangeHighRelative Humidity safe range, top margin, %RH or deg.Cro INTEGER .1.3.6.1.4.1.25728.8400.3.7 |
npRelHumTrapDataSafeRangeLowRelative Humidity safe range, bottom margin, %RH or deg.Cro INTEGER .1.3.6.1.4.1.25728.8400.3.8 |
npRelHumTrap OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400.6 |
npRelHumTrapFailRel.Humidity sensor failed! NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.6.100 |
npRelHumTrapBelowSafeHumidity below the Safe range NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.6.101 |
npRelHumTrapSafeHumidity in the Safe range NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.6.102 |
npRelHumTrapAboveSafeHumidity above the Safe range NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.6.103 |
npRelHumTrapAllEvents OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400.6.127 |
npRelHumTrapAllChannelsStatus of Humidity has changed! NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.6.127.99 |
npRelHumTrapTemp OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400.7 |
npRelHumTrapTempFailSensor failed! NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.7.100 |
npRelHumTrapTempBelowSafeTemperature below the Safe range NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.7.101 |
npRelHumTrapTempSafeTemperature in the Safe range NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.7.102 |
npRelHumTrapTempAboveSafeTemperature above the Safe range NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.7.103 |
npRelHumTrapTempAllEvents OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8400.7.127 |
npRelHumTrapTempAllChannelsStatus of Temperature has changed! NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8400.7.127.99 |
npThermo OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8800 |
npThermoTableThermo Sensors Table SEQUENCE OF NpThermoEntry .1.3.6.1.4.1.25728.8800.1 |
npThermoEntryThermo Sensors Table Row NpThermoEntry .1.3.6.1.4.1.25728.8800.1.1 |
npThermoSensorNThe id of temperature sensor, 1 to 8ro INTEGER .1.3.6.1.4.1.25728.8800.1.1.1 |
npThermoValueTemperature, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.1.1.2 |
npThermoStatusTemperature status (0=fault, 1=underheat, 2=normal, 3=overheat)ro Enumeration .1.3.6.1.4.1.25728.8800.1.1.3 |
npThermoLowBottom margin of normal temperature range, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.1.1.4 |
npThermoHighTop margin of normal temperature range, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.1.1.5 |
npThermoMemoT channel memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8800.1.1.6 |
npThermoValuePreciseTemperature, deg.C, with fractional part 3 digits after pointro FixedPoint1000 .1.3.6.1.4.1.25728.8800.1.1.7 |
npThermoTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8800.2 |
npThermoTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8800.2.0 |
npThermoTrapStatus of Thermo sensor is changed (crossing of normal temp. range) NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8800.2.0.1 |
npThermoTrapSensorNThe id of temperature sensor, 1 to 8ro INTEGER .1.3.6.1.4.1.25728.8800.2.1 |
npThermoTrapValueTemperature, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.2.2 |
npThermoTrapStatusTemperature status (0=fault, 1=underheat, 2=normal, 3=overheat)ro Enumeration .1.3.6.1.4.1.25728.8800.2.3 |
npThermoTrapLowBottom margin of normal temperature range, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.2.4 |
npThermoTrapHighTop margin of normal temperature range, deg.Cro INTEGER (-60..280) .1.3.6.1.4.1.25728.8800.2.5 |
npThermoTrapMemoT channel memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8800.2.6 |
npIo OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900 |
npIoTableDigital Input/output Table SEQUENCE OF NpIoEntry .1.3.6.1.4.1.25728.8900.1 |
npIoEntryDigital Input/output Table Row NpIoEntry .1.3.6.1.4.1.25728.8900.1.1 |
npIoLineNNumber of IO line, from 1 to max supportedro INTEGER .1.3.6.1.4.1.25728.8900.1.1.1 |
npIoLevelInInput level, 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.1.1.2 |
npIoLevelOutOutput level, 0 or 1. Write -1 to flip output.rw Enumeration .1.3.6.1.4.1.25728.8900.1.1.3 |
npIoMemoIO line memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8900.1.1.6 |
npIoPulseCounterPulse Counter on IO input line (counts positive fronts) Write 0 to reset.rw Counter32 .1.3.6.1.4.1.25728.8900.1.1.9 |
npIoSinglePulseDurationSet duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100msrw INTEGER .1.3.6.1.4.1.25728.8900.1.1.12 |
npIoSinglePulseStartWrite 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDurationrw INTEGER .1.3.6.1.4.1.25728.8900.1.1.13 |
npIoTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900.2 |
npIoTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900.2.0 |
npIoTrapInput state of IO line is changed NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8900.2.0.1 |
npIoTrapLineNTrap data, Number of IO linero INTEGER .1.3.6.1.4.1.25728.8900.2.1 |
npIoTrapLevelInTrap data, new Input level, 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.2.2 |
npIoTrapMemoTrap data, IO line memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8900.2.6 |
npIoTrapLevelLegendLegend for current logic level on the IO linero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8900.2.7 |