DKSF-253-5-X-A-X
AI MIB Summary
The DKSF-253-5-X-A-X MIB module enables SNMP-based remote monitoring and control of NetPing network diagnostic appliances, specifically tracking ping session status, latency measurements, packet loss statistics, and interface reachability states.
MIB for NetPing remote sensing and control
Main OID:
netPing.1.3.6.1.4.1.25728.50
34
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
lightcom OBJECT IDENTIFIER .1.3.6.1.4.1.25728 |
netPingMIB for NetPing remote sensing and control MODULE-IDENTITY .1.3.6.1.4.1.25728.50 |
npReboot OBJECT IDENTIFIER .1.3.6.1.4.1.25728.911 |
npSoftRebootWrite 1 to reboot device after current operations completitionrw INTEGER .1.3.6.1.4.1.25728.911.1 |
npResetStackWrite 1 to re-initialize network stackrw INTEGER .1.3.6.1.4.1.25728.911.2 |
npForcedRebootWrite 1 to immediate forced rebootrw INTEGER .1.3.6.1.4.1.25728.911.3 |
npIo OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900 |
npIoTableDigital Input/output Table SEQUENCE OF NpIoEntry .1.3.6.1.4.1.25728.8900.1 |
npIoEntryDigital Input/output Table Row NpIoEntry .1.3.6.1.4.1.25728.8900.1.1 |
npIoLineNNumber of IO line, from 1 to max supportedro INTEGER .1.3.6.1.4.1.25728.8900.1.1.1 |
npIoLevelInInput level, 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.1.1.2 |
npIoLevelOutOutput level, 0 or 1rw INTEGER .1.3.6.1.4.1.25728.8900.1.1.3 |
npIoMemoIO line memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8900.1.1.6 |
npIoPulseCounterPulse Counter (counts positive fronts) Write 0 to reset.rw Counter32 .1.3.6.1.4.1.25728.8900.1.1.9 |
npIoSinglePulseDurationSet duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100msrw INTEGER .1.3.6.1.4.1.25728.8900.1.1.12 |
npIoSinglePulseStartWrite 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDurationrw INTEGER .1.3.6.1.4.1.25728.8900.1.1.13 |
npIoTraps OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900.2 |
npIoTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25728.8900.2.0 |
npIoTrapInput state of IO line is changed NOTIFICATION-TYPE .1.3.6.1.4.1.25728.8900.2.0.1 |
npIoTrapLineNTrap data, Number of IO linero INTEGER .1.3.6.1.4.1.25728.8900.2.1 |
npIoTrapLevelInTrap data, new Input level, 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.2.2 |
npIoTrapMemoTrap data, IO line memoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25728.8900.2.6 |
npIoTrapLevelIn1Trap data, current Input level Line 1, value 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.2.21 |
npIoTrapLevelIn2Trap data, current Input level Line 2, value 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.2.22 |
npIoTrapLevelIn3Trap data, current Input level Line 3, value 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.2.23 |
npIoTrapLevelIn4Trap data, current Input level Line 4, value 0 or 1ro INTEGER .1.3.6.1.4.1.25728.8900.2.24 |
npElecMeter OBJECT IDENTIFIER .1.3.6.1.4.1.25728.9700 |
npElecTableElectricity Meter Table SEQUENCE OF NpElecEntry .1.3.6.1.4.1.25728.9700.1 |
npElecEntryElectricity Meter Table Table Row NpElecEntry .1.3.6.1.4.1.25728.9700.1.1 |
npElecIndexNumber of elec.meter, associated with IO linero INTEGER .1.3.6.1.4.1.25728.9700.1.1.1 |
npElecPulsesPerKwhPulses on IO line input per 1 kWh of consumed energyrw INTEGER .1.3.6.1.4.1.25728.9700.1.1.2 |
npElecPowerPower, Watts, based on pulse rate/interval, 5 minute averagero Gauge32 .1.3.6.1.4.1.25728.9700.1.1.3 |
npElecEnergyEnergy counter, kWh, based on pulse count Write 0 to clear (npElecEnergy, npElecEnergy100 and npIoPulseCounter at once)rw Counter32 .1.3.6.1.4.1.25728.9700.1.1.4 |
npElecEnergy100Energy counter, kWh*100, based on pulse count Write 0 to clear (npElecEnergy, npElecEnergy100 and npIoPulseCounter at once)rw Counter32 .1.3.6.1.4.1.25728.9700.1.1.5 |