Cabletron-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Cabletron-MIB.
349
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
349 total| Object Name |
|---|
cabletron OBJECT IDENTIFIER .1.3.6.1.4.1.52 |
commsDevice OBJECT IDENTIFIER .1.3.6.1.4.1.52.1 |
common OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1 |
commonRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.1 |
deviceTypeThis object defines the board type for the Management board in the device. (eg. IRBM, IRM). See appendix A for value.ro INTEGER .1.3.6.1.4.1.52.1.1.1.1 |
deviceNameAn ASCII name of the device that this agent manages.rw OCTET STRING .1.3.6.1.4.1.52.1.1.1.2 |
deviceIPAddressThe Internet address of this device.rw IpAddress .1.3.6.1.4.1.52.1.1.1.3 |
currentTimeThe current time of day as measured by the devicerw OCTET STRING .1.3.6.1.4.1.52.1.1.1.4 |
currentDateCharacter representation of the current daterw OCTET STRING .1.3.6.1.4.1.52.1.1.1.5 |
mACAddressThe MAC (Ethernet) address of the MMAC. This can also be obtained from address translation MIB. The Instance Identifier for the MAC address is interface number. For the IRBM, their are 2.ro OCTET STRING .1.3.6.1.4.1.52.1.1.1.6 |
sysOIDs OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2 |
sysOtherType OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.1 |
sysIRMType OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.2 |
soidIRMSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.2.1 |
soidIRBM OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.2.2 |
soidIRM2 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.2.3 |
sysRepType OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.3 |
soidMINIMMAC OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.3.1 |
soidMRXI OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.3.2 |
sysBDGType OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.1.2.4 |
repeater OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2 |
repeaterRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1 |
device OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.1 |
deviceMMACTypeIndicates the type of MMAC.ro Enumeration .1.3.6.1.4.1.52.1.2.1.1.2 |
deviceSlotsNumber of available device slots in this device, including the IRM slot.ro Enumeration .1.3.6.1.4.1.52.1.2.1.1.3 |
deviceOccupiedSlotsThe slots that contain MIM boards. This field is bit encoded (eg. If a bit is set then that board is present. For example, a value of 3 indicates that there are boards in the IRM slot and the first MIM slot.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.4 |
devicePortsOnThe number of operating ports on the device.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.5 |
deviceTotalPortsThe total number of repeater ports on the MMAC.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.6 |
deviceTotalPktsThe number of packets detected on all ports of this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.7 |
deviceTotalErrorsThe sum of all of the errors listed including alignment,CRC, runts, giants, and Out of window collisions.ro Counter .1.3.6.1.4.1.52.1.2.1.1.8 |
deviceTransmitCollThe number of transmit collisions detected by this MMAC.ro Counter .1.3.6.1.4.1.52.1.2.1.1.9 |
deviceRecCollsThe number of receive collsions detected by this MMAC.ro Counter .1.3.6.1.4.1.52.1.2.1.1.10 |
deviceAlignThe number of packets with alignement errors detected.ro Counter .1.3.6.1.4.1.52.1.2.1.1.11 |
deviceCRCThe number of packets with bad CRC detected.ro Counter .1.3.6.1.4.1.52.1.2.1.1.12 |
deviceRuntThe number of runt frames detected by this device.ro Counter .1.3.6.1.4.1.52.1.2.1.1.13 |
deviceOOWCollThe number of out-of-window collisions detected by thisro Counter .1.3.6.1.4.1.52.1.2.1.1.14 |
deviceNoResourcesThe number of No resource condtions detected.ro Counter .1.3.6.1.4.1.52.1.2.1.1.15 |
deviceRecBytesThe number of bytes detected on the network.ro Counter .1.3.6.1.4.1.52.1.2.1.1.16 |
deviceGiantFramesThe number of longer than 1518 bytes.ro Counter .1.3.6.1.4.1.52.1.2.1.1.17 |
deviceRestartIf this object is set to 0 the device is restarted.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.18 |
deviceResetCounterIf this object is set to 0, all of the devices Counters are reset to 0.rw Counter .1.3.6.1.4.1.52.1.2.1.1.19 |
deviceRedundantCtsThe number of redundant circuits available for use.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.20 |
deviceTimeBaseThe number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.24 |
deviceResetRedundancySetting this object to a 1 will reset redundancy for the entire box.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.25 |
deviceSrcAddrAgingTimeThe number of minutes that a source address is not detected before it is removed from the source address table.rw INTEGER .1.3.6.1.4.1.52.1.2.1.1.26 |
deviceSrcAddrTrapsControls sending of source address related traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.27 |
deviceSrcAddrLockedIf this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off.rw Enumeration .1.3.6.1.4.1.52.1.2.1.1.28 |
deviceEnetBoardMapThe slots that contain Ethernet MIM boards.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.29 |
deviceTokenRingBoardMapThe slots that contain Token Ring MIM boards.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.30 |
deviceFDDIBoardMapThe slots that contain FDDI MIM boards.ro INTEGER .1.3.6.1.4.1.52.1.2.1.1.31 |
board OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.2 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.3 |
sourceAddr OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.7 |
sourceAddrBoardThe board number of the port that the supplied source address has been found on.ro INTEGER .1.3.6.1.4.1.52.1.2.1.7.1 |
sourceAddrPortThe port number of the port that the supplied source address has been found on.ro INTEGER .1.3.6.1.4.1.52.1.2.1.7.2 |
redundancy OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.8 |
redundancyPollIntervalThe number of seconds between polls for redundancy.rw INTEGER .1.3.6.1.4.1.52.1.2.1.8.1 |
redundancyTestTodThe time of day at which the redundant circuits should be tested.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.2 |
redundancyPerformTestTest the redundant circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.3 |
redundancyCircuitNameThe name of the indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.4 |
redundancyRetryCountThe number of unanswered polls allowed for the indicated circuit before the current connection is declared bad.rw INTEGER .1.3.6.1.4.1.52.1.2.1.8.5 |
redundancyNumBPsThe number of board/port combinations associated with the indicated circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.6 |
redundancyCircuitBoardsThe boards associated with the indicated circuit, accessed by index.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.7 |
redundancyCircuitPortThe ports associated with the indicated circuit, accessed by index.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.8 |
redundancyCircuitTypesThe type of each port associated with the indicated circuit, accessed by index.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.9 |
redundancyCircuitNumAddrThe number of addresses associated with the indicated circuit.ro INTEGER .1.3.6.1.4.1.52.1.2.1.8.10 |
redundancyCircuitMACAddrAddAdds the ethernet address to the polling list for the indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.11 |
redundancyCircuitMACAddrDelRemoves the ethernet address from the polling list for the indicated circuit.rw OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.12 |
redundancyCircuitMACAddrDispThe ethernet addresses associated with the indicated circuit, accessed by index.ro OCTET STRING .1.3.6.1.4.1.52.1.2.1.8.13 |
redundancyCircuitEnableEnables and disables the indicated circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.14 |
redundancyCircuitResetReset the indicated circuit. Return all of the associated board and ports to NOT-USED, remove associated addresses from the polling list, reset the circuit name and retry count to default values .rw Enumeration .1.3.6.1.4.1.52.1.2.1.8.15 |
alarm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9 |
devAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1 |
devTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.1 |
devTrafficEnableEnable the sending of device level traffic traps.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.1.1 |
devTrafficThresholdThe threshold of packets within the devicetimebase that will cause a traffic alarm.rw Counter .1.3.6.1.4.1.52.1.2.1.9.1.1.2 |
devColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.2 |
devCollsEnableEnable the sending of device level collsion alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.2.1 |
devCollsThresholdThis object represents the number of collisions per good packet measured by the device that will generate an alarm. valid values are 1 to 15rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.2.2 |
devError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.1.3 |
devErrorEnableEnable the sending of device level error alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.1.3.1 |
devErrorThresholdThis object represents the percentage of errors per good packet that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.1.3.2 |
devErrorSourceThe type of error used for the error alarm.rw INTEGER -- The INTEGER is a bit encoded version of which errors to -- include in the error sum. The bits are encoded as follows: -- CRC_errors - Bit 0 - Least Significant Bit -- runts - Bit 1 -- OOW_colls - Bit 2 -- align_errs - Bit 3 -- No_resource - Bit 4 -- Giants - Bit 5 .1.3.6.1.4.1.52.1.2.1.9.1.3.3 |
bdAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2 |
bdTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.1 |
bdTrafficEnableEnable the sending of board level traffic traps for this board.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.1.1 |
bdTrafficThresholdThe threshold of packets within the Devicetimebase that will cause a traffic alarm.rw Counter .1.3.6.1.4.1.52.1.2.1.9.2.1.2 |
bdColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.2 |
bdCollsEnableEnable the sending of board level collsion alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.2.1 |
bdCollsThresholdThis object represents the number of collisions per good packet measured by the board that will generate an alarm. valid values are 1 to 15rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.2.2 |
bdError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.2.3 |
bdErrorEnableEnable the sending of board level error alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.2.3.1 |
bdErrorThresholdThis object represents the percentage of errors per good packet that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.2.3.2 |
bdErrorSourceThe type of error used for the error alarm.rw INTEGER -- The INTEGER is a bit encoded version of which errors to -- include in the error sum. The bits are encoded as follows: -- -- CRC_errors - Bit 0 - Least Significant Bit -- runts - Bit 1 -- OOW_colls - Bit 2 -- align_errs - Bit 3 -- No_resource - Bit 4 -- Giants - Bit 5 .1.3.6.1.4.1.52.1.2.1.9.2.3.3 |
portAlrm OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3 |
portTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.1 |
portTrafficEnableEnable the sending of port level traffic traps for this port.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.1.1 |
portTrafficThresholdThe threshold of packets within the Devicetimebase that will cause a traffic alarm.rw Counter .1.3.6.1.4.1.52.1.2.1.9.3.1.2 |
portColls OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.2 |
portCollsEnableEnable the sending of port level collsion alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.2.1 |
portCollsThresholdThis object represents the number of collisions per good packet measured by the port that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.2.2 |
portError OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.1.9.3.3 |
portErrorEnableEnable the sending of port level error alarms.rw Enumeration .1.3.6.1.4.1.52.1.2.1.9.3.3.1 |
portErrorThresholdThis object represents the percentage of errors per good packet that will generate an alarm.rw INTEGER .1.3.6.1.4.1.52.1.2.1.9.3.3.2 |
portErrorSourceThe type of error used for the error alarm.rw INTEGER -- The INTEGER is a bit encoded version of which errors to -- include in the error sum. The bits are encoded as follows: -- CRC_errors - Bit 0 - Least Significant Bit -- runts - Bit 1 -- OOW_colls - Bit 2 -- align_errs - Bit 3 -- No_resource - Bit 4 -- Giants - Bit 5 .1.3.6.1.4.1.52.1.2.1.9.3.3.3 |
repeaterRev2 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2 |
rr2device OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1 |
commonD OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1.1 |
ethernetD OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1.2 |
tokenRingD OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.1.3 |
deviceTRTokenRingPortsOnThe number of Token Ring Ports (i.e. station, Ring In and Ring Out ports) enabled on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.1 |
deviceTRTotalTokenRingPortsThe total number of Token Ring Ports (i.e. station, Ring In and Ring Out ports) on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.2 |
deviceTRTotalTokenRingRingPortsOnThe total number of Ring In and Ring Out ports (active) enabled on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.3 |
deviceTRTotalTokenRingRingPortsThe total number of Ring In and Ring Out ports on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.4 |
deviceTRTotalTokenRingRingsThe total number of (Token Ring) rings formed on this device.ro INTEGER .1.3.6.1.4.1.52.1.2.2.1.3.5 |
network OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.2 |
rr2board OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3 |
commonB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.1 |
boardIndexThe slot number of this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.1 |
boardNameThe name of the board. This field will only contain printable ASCII characters.rw OCTET STRING .1.3.6.1.4.1.52.1.2.2.3.1.2 |
boardTypeThe type of the MIM. (eg. FOT, TPT, etc). See appendix A for encoding.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.3 |
boardTotalPortsTotal number of ports supported on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.4 |
boardSTATUSThe administrative status of this MIM.rw Enumeration .1.3.6.1.4.1.52.1.2.2.3.1.5 |
boardPortsOnThe number of operating ports on the board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.1.6 |
ethernetB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.2 |
boardTotalPktsThe total number of packets this board has seen since the last reset.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.1 |
boardErrorPktsThe number of packets that have experienced an error. VAlid only on the IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.2 |
boardTransCollThe number of transmit collisions this board has detected.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.3 |
boardRecCollThe number of Receive mode collisions this board has detected.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.4 |
boardAlignThe number of mis-aligned frames this board has detected. Only valid for the IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.5 |
boardCRCThe number of packets with bad CRC detected. Only valid on IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.6 |
boardRuntThe number of runt frames detected by this board. Valid fr the IRBM, IRM2, and MiniMMAC only.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.7 |
boardOOWCollThe number of out-of-window collisions detected by this board. Only valid on the IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.8 |
boardNoResourcesThe number of times The no resources condition was detected for this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.9 |
boardRecBytesThe number of bytes detected on the network. Valid only on the IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.10 |
boardGiantsThe number of packets longer than 1518 bytes detected on this board.ro Counter .1.3.6.1.4.1.52.1.2.2.3.2.11 |
tokenRingB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.3 |
boardTotalRingPortsThe total number of ring ports on this board. Currently, zero or two.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.1 |
boardTotalStationPortsThe total number of station ports on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.2 |
boardModeStatusThe board is configured for 2 == Auto Mode or 1 == Management Moderw INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.3 |
boardTotalRingPortsOnThe number of enabled ring ports on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.4 |
boardTotalStationPortsOnThe number of enabled station ports on this board.ro INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.5 |
boardSpeedSpeed 4 == 4 Mhz Speed 16 == 16 Mhzrw INTEGER .1.3.6.1.4.1.52.1.2.2.3.3.6 |
boardRingSpeedFaultData speed of station mismatches configuration speed of board. board is automatically bypassed.ro Enumeration .1.3.6.1.4.1.52.1.2.2.3.3.7 |
fddiB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.3.4 |
rr2port OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4 |
commonP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.1 |
portIndexThe slot number of this port.ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.1.1 |
portMediaTypeThe type of the port. (eg. FOT, TPT, etc). See appendix A for values.ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.1.2 |
portAdminStateThe administrative status of this port.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.1.3 |
portSourceAddrA source address that has been seen on this port.ro OCTET STRING .1.3.6.1.4.1.52.1.2.2.4.1.4 |
ethernetP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.2 |
portTopologyTypeThe topological type of the port. { Station(1) Link(2) }ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.2.1 |
portLinkStatusThe state of the link signal for this portro Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.2 |
portStatusro Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.3 |
portTotalPktsThe total number of packets this port has seen since the last reset.ro INTEGER .1.3.6.1.4.1.52.1.2.2.4.2.4 |
portErrorPktsThe number of packets that have experienced an error. Valid only on the IRBM, IRM2, and MiniMMACro Counter .1.3.6.1.4.1.52.1.2.2.4.2.5 |
portXmitCollsThe number of Transmit mode collisions this port has detected. Only valid on IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.6 |
portRecCollsThe number of Receive mode collisions this port has detected. Only valid on IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.7 |
portAlignThe number of mis-aligned frames this port has detected. Only valid for the IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.8 |
portCRCThe number of packets with bad CRC detected. Only valid on IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.9 |
portRuntThe number of runt frames detected by this port. Valid for the IRBM, IRM2, and MiniMMAC only.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.10 |
portOOWCollThe number of out-of-window collisions detected by this port. Only valid on the IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.11 |
portNoResorcesThe number of times the no resource condition is detected on this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.12 |
portRecBytesThe number of bytes detected on the network. Valid only on the IRBM, IRM2, and MiniMMAC.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.13 |
portGiantsThe number of frames longer than 1518 bytes detected on this port.ro Counter .1.3.6.1.4.1.52.1.2.2.4.2.14 |
portRedundCrtThe redundant circuit with which this port is associated.rw INTEGER .1.3.6.1.4.1.52.1.2.2.4.2.15 |
portRedundTypeThe type of port this port is in the redundant circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.16 |
portRedundStatusThe current state of this port is in the redundant circuit.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.17 |
portForceLinkTypeThis variable forces a port to be a link port.rw Enumeration .1.3.6.1.4.1.52.1.2.2.4.2.18 |
tokenRingP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3 |
stationP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.1 |
stationPortLinkStatusWhen station is supplying phantom current the Link Signal is active. When there is no phantom current the Link Signal is inactive.ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.1.1 |
stationPortLinkStateTimeThe amount of time (in seconds) elapsed since the station port last changed state.rw INTEGER .1.3.6.1.4.1.52.1.2.2.4.3.1.2 |
ringP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.3.2 |
ringPortLinkStatusOff (wrapped). On (active).ro Enumeration .1.3.6.1.4.1.52.1.2.2.4.3.2.1 |
ringPortLinkStateTimeThe amount of time (in seconds) elapsed since ring port last changed state.rw INTEGER .1.3.6.1.4.1.52.1.2.2.4.3.2.2 |
fddiP OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.4.4 |
repeaterTables OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.2.2.5 |
bridge OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3 |
bridgeRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1 |
bdgdevice OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.1 |
bdgdeviceDisableBdgIndicates if the bridge will be disabled.rw Enumeration .1.3.6.1.4.1.52.1.3.1.1.1 |
bdgdeviceRestoreSettingsRestore the following settings to their default values: Bridge Name to ETHERNET_BRIDGE, Location to LOCAL, Port 1 Name to PORT_1, Port 2 Name to PORT_2, Port 1 Network Name to LAN_1, Port 2 Network Name to LAN_2, Ageing Time for Acquired Database to 300 seconds, Erase the acquired database, Erase the permanent database, Place sixteen default multicast addresses into the permanent and acquired databases, Type of Spanning Tree to 802.1, Type of Filtering to IEEE 802.1, Bridge Max Age to 20 seconds, Bridge Forward Delay to 15 seconds, Bridge Hello Time to 2 seconds, Bridge Priority to 8000, Port 1 Priority to 80, Port 2 Priority to 80, Port 1 Path Cost to 100, Port 2 Path Cost to 100, Restart the bridge.rw Enumeration .1.3.6.1.4.1.52.1.3.1.1.2 |
bdgdeviceBdgNameThe user-defined name (up to 32 characters long) of the bridge. The default bridge name is ETHERNET_BRIDGE.rw OCTET STRING .1.3.6.1.4.1.52.1.3.1.1.4 |
bdgdeviceNumPortsThe number of ports present on the bridge.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.5 |
bdgdeviceTypeThe type of bridge, NB25E, IRBM, or NB20E.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.1.6 |
bdgdeviceVersionThe release version of the firmware installed in the bridge.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.1.7 |
bdgdeviceLocationThe user-defined name to indicate the location of the bridge on the network. The default location name is LOCAL.rw OCTET STRING .1.3.6.1.4.1.52.1.3.1.1.8 |
bdgdeviceStatusThe status of the bridge, ON-LINE, STAND BY or DISABLED.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.1.9 |
bdgdeviceRestartBdgForce the bridge to undergo a software reset.rw Enumeration .1.3.6.1.4.1.52.1.3.1.1.10 |
bdgdeviceFrFwdThe number of frames forwarded by the bridge.ro Counter .1.3.6.1.4.1.52.1.3.1.1.11 |
bdgdeviceFrRxThe number of frames received by the bridge.ro Counter .1.3.6.1.4.1.52.1.3.1.1.12 |
bdgdeviceFrFltThe number of frames filtered by the bridge.ro Counter .1.3.6.1.4.1.52.1.3.1.1.13 |
bdgdeviceErrThe total number of network errors that have occurred.ro Counter .1.3.6.1.4.1.52.1.3.1.1.14 |
bdgdeviceSwitchSettingIndicates the current switch settings read from the bridge hardware.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.1.15 |
bdgdeviceNumRestartsThe number of times the bridge has been powered up or restarted.ro Counter .1.3.6.1.4.1.52.1.3.1.1.16 |
bdgdeviceTypeFilteringThe type of filtering to be performed by the bridge. The default is IEEE 802.1.rw Enumeration .1.3.6.1.4.1.52.1.3.1.1.17 |
bdgdeviceSTAProtocolThe spanning tree algorithm under which the bridge is operating. The selections are as follows: - IEEE 802.1 compliant spanning tree algorithm environment (802.1) - DEC LAN Bridge 100 environment (DEC) - Without the spanning tree algorithm enabled (NONE) The default is 802.1.rw Enumeration .1.3.6.1.4.1.52.1.3.1.1.18 |
bdgdeviceBridgeIDThe unique identifier of the bridge. The first two bytes of the identifier are the bridge priority and the last six bytes are the Ethernet address.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.1.19 |
bdgdeviceTopChgCntThe number of times the bridge's Topology Change Flag has been changed since the bridge was powered up or initialized.ro Counter .1.3.6.1.4.1.52.1.3.1.1.20 |
bdgdeviceRootCostThe cost of the path to the root from this bridge.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.21 |
bdgdeviceRootPortThe port identifier for the port which offers the lowest cost path to the root, i.e. that port for which the sum of the values of the designated cost and path cost parameters held for the port is lowest.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.22 |
bdgdeviceHelloTimeThe time interval between the transmission of Configuration BPDU's by a bridge which is attempting to become the root or is the root.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.23 |
bdgdeviceBdgMaxAgeThe value of the Max Age parameter when the bridge is the root or is attempting to become the root. A time of 6 to 40 seconds is allowed. The default is 20 seconds.rw INTEGER .1.3.6.1.4.1.52.1.3.1.1.24 |
bdgdeviceBdgFwdDlyThe value of the forward delay parameter when the bridge is the root or is attempting to become the root. A time of 4 to 30 seconds is allowed.rw INTEGER .1.3.6.1.4.1.52.1.3.1.1.25 |
bdgdeviceTimeTopChgThe time in seconds that has elapsed since the bridge's Topology Change Flag last recorded the value of a topology change.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.26 |
bdgdeviceTopChgIndicates if a bridge topology change is in progress.ro Enumeration .1.3.6.1.4.1.52.1.3.1.1.27 |
bdgdeviceDesigRootThe unique identifier of the bridge recorded as the root.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.1.28 |
bdgdeviceMaxAgeThe maximum age of received protocol information before it is discarded.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.29 |
bdgdeviceHoldTimeThe minimum time period elapsing between the transmission of configuration BPDU's through a given bridge port.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.30 |
bdgdeviceFwdDlyThe time spent in the listening state while moving from the blocking state to the learning state, or the time spent in the learning state while moving from the listening state to the forwarding state.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.31 |
bdgdeviceBdgHelloThe value of the Hello Time parameter when the bridge is the root or is attempting to become the root. A time of 1 to 10 seconds is allowed. The default is 2 seconds.rw INTEGER .1.3.6.1.4.1.52.1.3.1.1.32 |
bdgdeviceBdgPriorityThe part of the bridge address that contains the identifier used in the spanning tree for priority comparisons. Allowed range is 0 through FFFF. The default is 8000.rw INTEGER .1.3.6.1.4.1.52.1.3.1.1.33 |
bdgdeviceResetCountsReset all counters to zero.rw Enumeration .1.3.6.1.4.1.52.1.3.1.1.34 |
bdgdeviceUptimeThe time, in seconds, that has elapsed since the bridge was last reset or initialized.ro INTEGER .1.3.6.1.4.1.52.1.3.1.1.35 |
bdgdeviceTrapTypeContains the object identifier of the first VarBinding in the last trap generated by the bridge.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.1.36 |
bdgPort OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.2 |
bdgPortAddressThe Ethernet address of the port.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.2.1 |
bdgPortNameThe user-defined name assigned to the port. The default port 1 name is PORT_1 and the default Port 2 name is PORT_2.rw OCTET STRING .1.3.6.1.4.1.52.1.3.1.2.2 |
bdgPortTypeThe IEEE specification the port meets, e.g. 802.3.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.2.3 |
bdgPortStatusThe status in which the port is operating. The status messages for Ports 1 and 2 are: OFF - The port is off, due to a failed network interface chip associated with that port. OK/SQE ON - The port is communicating with the network and the transceiver making the connection to the network has SQE enabled. OK/SQE OFF - The port is communicating with the network and the transceiver making the connection to the network has SQE disabled. CARRIER LOST - Communication with the network has not been established or has been lost.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.2.4 |
bdgPortNetNameThe user-defined name assigned to a network segment connected to the port. The default network name for Port 1 is LAN_1 and the default network name for Port 2 is LAN_2.rw OCTET STRING .1.3.6.1.4.1.52.1.3.1.2.5 |
bdgPortFrRxThe number of frames received at the specified port.ro Counter .1.3.6.1.4.1.52.1.3.1.2.6 |
bdgPortDisInbThe total number of valid frames that were received at the port but then discarded by the bridge in the forwarding process.ro Counter .1.3.6.1.4.1.52.1.3.1.2.7 |
bdgPortFwdOutbThe number of frames forwarded successfully to the appropriate port.ro Counter .1.3.6.1.4.1.52.1.3.1.2.8 |
bdgPortDisLOBThe number of packets that were discarded by the bridge because of a lack of buffer space to maintain the data.ro Counter .1.3.6.1.4.1.52.1.3.1.2.9 |
bdgPortDisTDEThe number of frames that were intended for forwarding but were discarded when the maximum time period set for transmission was exceeded before forwarding was possible.ro Counter .1.3.6.1.4.1.52.1.3.1.2.10 |
bdgPortDisErrThe number of frames that could not be transmitted because the frame was too large for the attached network (1526 bytes, including preamble, for 802.3 networks).ro Counter .1.3.6.1.4.1.52.1.3.1.2.11 |
bdgPortCollThe number of collisions that have occurred on the network at the specified port.ro Counter .1.3.6.1.4.1.52.1.3.1.2.12 |
bdgPortTxAbrtThe number of transmissions that have been aborted due to excessive collisions (over 16 attempts to transmit the same packet).ro Counter .1.3.6.1.4.1.52.1.3.1.2.13 |
bdgPortOowCollThe number of collisions out of the standard collision window (51.2 uS). This indicates a network problem.ro Counter .1.3.6.1.4.1.52.1.3.1.2.14 |
bdgPortCRCErrThe number of packets detected with Cyclical Redundancy Check failures.ro Counter .1.3.6.1.4.1.52.1.3.1.2.15 |
bdgPortFrAlErrThe number of errors due to misaligned packets.ro Counter .1.3.6.1.4.1.52.1.3.1.2.16 |
bdgPortPriorityThe part of the port identifier which is used with the spanning tree algorithm when determining which port in a LAN segment has priority. The default is 80.rw INTEGER .1.3.6.1.4.1.52.1.3.1.2.17 |
bdgPortStateThe current state of the port, DISABLED, LISTENING, LEARNING, FORWARDING or BLOCKING.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.2.18 |
bdgPortPathCostThe contributory cost of the applicable port to the overall cost of the path when the specified port is the root port. Allowable range is 1 to 65535. The default is 100.rw INTEGER .1.3.6.1.4.1.52.1.3.1.2.19 |
bdgPortDesigCostThe cost of the path of this port to the root bridge on the network.ro INTEGER .1.3.6.1.4.1.52.1.3.1.2.20 |
bdgPortDesigBrdgThe network address of the bridge that is assumed to be the root bridge on the network.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.2.21 |
bdgPortDesigPortThe port identifier of the bridge port believed to be the designated port for the LAN associated with the port.ro INTEGER .1.3.6.1.4.1.52.1.3.1.2.22 |
bdgPortTopChgAckThe value of the topology change acknowledgement flag in the next configuration BPDU to be transmitted on the associated port.ro Enumeration .1.3.6.1.4.1.52.1.3.1.2.23 |
bdgPortDesigRootThe unique bridge identifier of the bridge that is assumed to be the root bridge on the network.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.2.24 |
bdgPortRuntPacketsThe number of packets received at the indicated bdgPort that were less than the IEEE 802.3 minimum Ethernet frame size of 64 bytes.ro Counter .1.3.6.1.4.1.52.1.3.1.2.25 |
bdgPortOversizePacketsThe number of packets received at the indicated port that were greater than the IEEE 802.3 maximum Ethernet frame size of 1518 bytes.ro Counter .1.3.6.1.4.1.52.1.3.1.2.26 |
bdgPortFrFiltThe number of frames received at the indicated port that were filtered by the bridge.ro Counter .1.3.6.1.4.1.52.1.3.1.2.27 |
filterDB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3 |
acqDB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.1 |
acqStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.1.1 |
acqTotalEntriesThe total number of entries in the acquired database.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.1.1.1 |
acqMaxEntriesThe maximum number of entries allowed in the acquired database.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.1.1.2 |
acqStaticEntriesThe number of addresses added to the Acquired database by the user or network manager.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.1.1.3 |
acqStaticAgeTimeThe length of time allowed for a static entry in the Acquired database to be inactive before it is dropped from the database. This time is fixed at zero.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.1.1.4 |
acqDynEntriesThe number of entries that have been accumulated in the Acquired database through the bridge's learning process.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.1.1.5 |
acqDynAgeTimeThe length of time allowed for a dynamic entry in the acquired database to be inactive before it is dropped from the database. A time from 10 - 1,000,000 seconds is allowed. The default is 300 seconds.rw INTEGER .1.3.6.1.4.1.52.1.3.1.3.1.1.6 |
acqEraseDatabaseSet to zero to erase all entries in the acquired database.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.1.1.7 |
acqOptions OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.1.2 |
acqCreate00Add an entry to the acquired database to filter packets entering ports 1 and 2 if those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.1.2.1 |
acqCreate20Add an entry to the acquired database to forward packets entering port1 to port2 and filter packets entering port2 if those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.1.2.2 |
acqCreate01Add an entry to the acquired database to filter packets entering port 1 and forward packets entering port 2 to port 1 if those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.1.2.3 |
acqCreate21Add an entry to the acquired database to forward packets entering port 1 to port 2 and to forward packets entering port 2 to port 1 if those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.1.2.4 |
acqDeleteDelete an entry from the acquired database.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.1.2.5 |
acqDispTypeDisplay the entry type, STATIC or DYNAMIC.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.3.1.2.6 |
acqDispOutp1The outbound port for packets entering port 1.ro Enumeration .1.3.6.1.4.1.52.1.3.1.3.1.2.7 |
acqDispOutp2The outbound port for packets entering port 2.ro Enumeration .1.3.6.1.4.1.52.1.3.1.3.1.2.8 |
acqSrcAddressThe source address of this acquired database entry, i.e. the instance.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.3.1.2.9 |
permDB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.2 |
permStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.2.1 |
permMaxEntriesThe maximum number of entries allowed in the permanent database.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.2.1.1 |
permCurrEntriesThe number of entries currently recorded in the bridge's permanent database.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.2.1.2 |
permEraseDatabaseErase all entries in the permanent database.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.2.1.3 |
permOptions OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.2.2 |
permCreate00Add an entry to the permanent database to filter packets entering ports 1 and 2 if those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.2.2.1 |
permCreate20Add an entry to the permanent database to forward packets entering port 1 and filter packets entering port 2 if those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.2.2.2 |
permCreate01Add an entry to the permanent database to filter packets entering port 1 and forward packets entering port 2 if those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.2.2.3 |
permCreate21Add an entry to the permanent database to forward packets entering ports 1 and 2 if those packets are destined for the specified address.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.2.2.4 |
permDeleteDelete an entry from the permanent database.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.2.2.5 |
permDispTypeDisplay the entry type, STATIC or DYNAMIC.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.3.2.2.6 |
permDispOutp1The outbound port for packets entering port 1.ro Enumeration .1.3.6.1.4.1.52.1.3.1.3.2.2.7 |
permDispOutp2The outbound port for packets entering port 2.ro Enumeration .1.3.6.1.4.1.52.1.3.1.3.2.2.8 |
permSrcAddressThe source address in this permanent database entry, i.e. the instance.ro OCTET STRING .1.3.6.1.4.1.52.1.3.1.3.2.2.9 |
specialDB OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.3 |
specStats OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.3.1 |
specNumEntriesThe number of filters in the special database.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.3.1.1 |
specMaxEntriesThe maximum number of filters the special database can contain.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.3.1.2 |
specNextFilterNumThe number of the next available filter that can be added to the special database.ro INTEGER .1.3.6.1.4.1.52.1.3.1.3.3.1.3 |
specFilters OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.3.3.2 |
specEnableEnable or disable the filter.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.3.2.1 |
specPort1Set port 1 to filter or forward packets.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.3.2.2 |
specPort2Set port 2 to filter or forward packets.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.3.2.3 |
specDestAddressSet the special database to filter packets with a specific destination address.rw OCTET STRING .1.3.6.1.4.1.52.1.3.1.3.3.2.4 |
specSrcAddressSet the special database to filter packets with a specific source address.rw OCTET STRING .1.3.6.1.4.1.52.1.3.1.3.3.2.5 |
specTypeSet the special database to filter packets with a specific type field.rw OCTET STRING .1.3.6.1.4.1.52.1.3.1.3.3.2.6 |
specDataFieldSet the special database to filter packets based on the first sixteen bytes of data in the packet.rw OCTET STRING .1.3.6.1.4.1.52.1.3.1.3.3.2.7 |
specDeleteFilterDelete a filter from the special database.rw Enumeration .1.3.6.1.4.1.52.1.3.1.3.3.2.8 |
trapTypes OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.4 |
bdgTables OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.3.1.5 |
router OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.4 |
product OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.5 |
productRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.5.1 |
iRBM OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.5.1.1 |
iRBMRevisionThe revision of the IRBM boardrw Enumeration .1.3.6.1.4.1.52.1.5.1.1.1 |
iRBMPortAssociationControls how front panel ports are associated with the bridge or the repeater. The valid values are: Value AUI Port Fiber Port 0 Bridge Redundant 1 Redundant Bridge 2 Bridge Repeater 3 Repeater Bridge 4 Redundant Repeater 5 Repeater Redundant Note: only values 0 and 1 are valid for rev 2 boards and before.rw INTEGER .1.3.6.1.4.1.52.1.5.1.1.2 |
subsystem OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6 |
mMAC OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.1 |
fnb OBJECT IDENTIFIER .1.3.6.1.4.1.52.1.6.1.1 |
fnbConnectedLeftThe Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write). Faulted == 3 (Management/AutoMode tried to attach but failed read ONLY).rw INTEGER .1.3.6.1.4.1.52.1.6.1.1.1 |
fnbConnectedRightThe Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write ). Faulted == 3 (Management/AutoMode tried to attach but failed read ONLY).rw INTEGER .1.3.6.1.4.1.52.1.6.1.1.2 |
fnbBoardBypassStateOff == 1 (NOT bypassed). On == 2 (bypassed).rw INTEGER .1.3.6.1.4.1.52.1.6.1.1.3 |
layerMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.52.2 |
lmcommon OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.1 |
mAC OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2 |
ieee8023 OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2.1 |
pcIF OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2.1.1 |
pcIfRev OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2.1.1.1 |
pcDeviceNameName of the PC devicero OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.1 |
pcBoardTypeAn object Identifier that indicates the type of the PC board. This will include MAC type and Media type.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.2.2.1.1.1.2 |
pcOwnerNameThe owner of this PC.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.3 |
pcLocationA text description of the location of this PC.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.4 |
pcMMACAddrThe MAC address of the MMAC that this PC is connected to.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.5 |
pcMMACBoardThe slot number of the board in the MMAC that this PC is connected to.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.6 |
pcMMACPortThe number of the port on the board of the MMAC that this PC is connected to.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.7 |
pcApplicationA text description of the network application running on this PC.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.8 |
pcDriverRevThe revision of the LAN card driver.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.9 |
pcOnboardMemoryThe number of Kilobytes of memory (eg. a 16K board would reply 16)ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.10 |
pcCommentA user-defined character string.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.11 |
pcMACAddrThe MAC address of the PC card.ro OCTET STRING .1.3.6.1.4.1.52.2.2.1.1.1.12 |
pcFramesXmitThe number of MAC frames transmitted by this PC card.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.13 |
pcBytesXmitThe number bytes transmitted by this PC card.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.14 |
pcMcastXmitThe number of multicasted frames sent by this PC card.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.15 |
pcBcastXmitThe number of broadcast frames from this PC card.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.16 |
pcDeferXmitThe number of transmit packets that were deferred due to busy media.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.17 |
pcSglCollThe number of transmit packet experiencing a single collision.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.18 |
pcMultiCollThe number of transmit packets that have experienced multiple collisions.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.19 |
pcTotXmitErrsThe total number of transmit errors.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.20 |
pcLateCollsThe number of transmit packets that experienced late collisions.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.21 |
pcXcessCollsThe number of transmit packets aborted due to excess collisions.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.22 |
pcCarrErrThe number of transmit packets that experience carrier sense errors (ie. lose carrier during transmission).ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.23 |
pcFramesRecThe number of frames received.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.24 |
pcBytesRecThe number of bytes received by this station.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.25 |
pcMcastRecThe number of multicasted frames received.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.26 |
pcBcastRecThe number of broadcast packets received.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.27 |
pcTotRecErrsThe total number of receive errors.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.28 |
pcTooLongThe number of packets received that are too long (over 1518 bytes).ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.29 |
pcTooShortThe number of packets that are too short. (under 64 bytes long).ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.30 |
pcAlignErrsThe number of alignment errors in receive packets.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.31 |
pcCRCErrsThe number of receive packets with CRC errors.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.32 |
pcLenErrsThe number of packets whose length is not equal to the number of bytes received.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.33 |
pcIntRecErrThe number of receive packets that experienced internal errors (eg. no receive buffers).ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.34 |
pcSqeErrThe number of SQE errors.ro INTEGER .1.3.6.1.4.1.52.2.2.1.1.1.35 |