CXVR-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
101
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
101 total| Object Name |
|---|
RFC1155-SMIThe Voice Routing group table. SEQUENCE OF VrRegEntry .1.3.6.1.4.1.495.2.1.6.50.10 |
vrConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.6.50.20 |
vrConfigNodeIdAllows you to create a unique name for the frame relay node.
Range of Values: Up to 32 characters
Default Value: VoiveRoutingrw DisplayString .1.3.6.1.4.1.495.2.1.6.50.20.1 |
vrConfigSoftIdDisplays the software version number.ro DisplayString .1.3.6.1.4.1.495.2.1.6.50.20.2 |
vrConfigNoOfSysRouteSupportedMaximum number of routing definitions that can be supported in the
VR table.
Range of Values: From 1 to 1024
Default Value: 1rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.20.3 |
vrConfigNoOfDigitSupportedThe maximum number of digits to be used for dial extension numbers over
the entire network.
Options:
dig5 (5): The maximum number is five digits.
dig7 (7): The maximum number is seven digits. (FOR FUTURE USE ONLY).
Default Value: dig5 (5)rw Enumeration .1.3.6.1.4.1.495.2.1.6.50.20.4 |
vrConfigMaxBufferPoolSizeMaximum number of OS buffers that can be queued at any time in the
VR fifos.
Range of Values: From 0 to 1000
Note: Zero (0) means that Voice/Fax packets are routed immediately (never
queued).
Default Values: 0rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.20.5 |
vrConfigFastSwitchingOptionThis object refers to Dial Digit Packing for transmission of the extension
numbers. The digits can be sent either 2 bytes or 4 bytes long.
Options:
vrprtysmall (1): The priority (using 2 bytes) is to minimize the amount of
bandwidth used. This option is more CPU intensive, and slower.
vrprtyroute (2): The priority (using 4 bytes) is speed. This option will
minimize CPU usage but will require more bandwidth.
Default Value: vrprtysmall (1)rw Enumeration .1.3.6.1.4.1.495.2.1.6.50.20.6 |
vrConfigStatsSamplingPeriodThis parameter allows you to set the polling interval (in seconds) for
statistics.
Range of Values: From 0 to 3600
Default Value: 15rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.20.7 |
vrConfigControlThis object allows you to control the statistics in the VRSR table
and the entries in the VR register table.
Options:
vrcfgidle(1): Control is turned off
vrcfgrte(2): This option clears the statistics in the VRSR table.
vrcfgreg(3): This options ages out the voice routing register of local
extensions.
Default Value: vrcfgidle (1)rw Enumeration .1.3.6.1.4.1.495.2.1.6.50.20.8 |
vrConfigOptimizationThis object allows you to enable and disable the optimization in the Voice,
VR and FR modules.
Options:
vroptdisabled(1): Optimization code is turned off. This option enables
backwards compatibility with older versions of VR software. This option will
be removed in future releases.
vroptenabled(2): Optimization code is turned on. This enables VR, Voice
application module and Frame Relay Multiprotocol Encapsulation to use less
bandwidth. this option will be removed in the future releases.
vroptbwmgt(3): Optimization code is turned on plus enhancement for bandwidth
management. This option is similar to option 2, in addition to when Bandwidth
Management is enabled and there is no more bandwidth left on the link, then
by chosing this option, it will stop any new voice call establishement. This
is the default value and is the recommended value to use.
Default Value: vroptbwmgt (3)rw Enumeration .1.3.6.1.4.1.495.2.1.6.50.20.9 |
vrMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.50.20.20 |
vrStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.6.50.30 |
vrStatInitStateVR module initialisation state.
Options:
vrDead (1):
vrUnrecoverableError (2):
vrTablesBuilt (3):
vrConfigRead (4):
vrInitialized (10)ro Enumeration .1.3.6.1.4.1.495.2.1.6.50.30.30 |
vrStatLongestMuxPassInMsLongest time recorded yet for a same multiplexing pass. Relevant only if
pool is different from zero.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.50 |
vrStatNbPacketsForwardedPerSecNo. of packets per second forwarded by VR during the last sampling periodro Counter .1.3.6.1.4.1.495.2.1.6.50.30.51 |
vrStatNbRoutingConflictsNo.of times a routing conflict has been detected when adding a routing
entry.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.52 |
vrStatRegOverallNumberCurrent number of local registration blocks.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.60 |
vrStatRegNotOwnerDial number not registered or refreshed because the requester is not
owner of it.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.61 |
vrStatRegInvalidDialNumberThe dial number is invalid and cannot be registered.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.62 |
vrStatRegFormatErrorDial number not registered or refreshed because of a format error in
the request.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.63 |
vrStatNbVceMsgRxNumber of messages received from the VCE module.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.75 |
vrStatNbVceMsgTxNumber of messages transmitted from the VCE module.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.76 |
vrStatNbBusMsgRxNumber of messages received from the TBC module.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.77 |
vrStatNbBusMsgTxNumber of messages transmitted from the TBC module.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.78 |
vrStatNbWanMsgRxNumber of messages received from the WAN.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.79 |
vrStatNbWanMsgTxNumber of messages transmitted from the WAN.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.80 |
vrStatNbOutboundQueueFullNumber of times the buffer queue has been exceeded. (Irrelevant
if pool is set to zero.)ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.81 |
vrStatNbOverallForwardsNumber of overall packets (voice + other applications) forwarded.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.90 |
vrStatNbOverallDiscardsNumber of overall packets (voice + other applications) discarded.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.91 |
vrStatNbDeadEndsNumber of times the routing process did not find any routing definition
block for a specific dial number. This also increments the alldsc object.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.92 |
vrStatErrorSum of many counters under vrStat.error.xxx, vrStat.ianIfError, etc.ro Counter .1.3.6.1.4.1.495.2.1.6.50.30.93 |
vrStatFieldsAddressvrStat starting address.
Range of Values: From 0 to 10ro DisplayString .1.3.6.1.4.1.495.2.1.6.50.30.94 |
vrStatIamUnxFieldAddressIAM unexpected event table address.
Range of Values: From 0 to 10ro DisplayString .1.3.6.1.4.1.495.2.1.6.50.30.95 |
vrSrTableThe Voice Routing System Routes table. SEQUENCE OF VrSrEntry .1.3.6.1.4.1.495.2.1.6.50.40 |
vrSrEntryAn entry in the Voice Routing System Routes Table. VrSrEntry .1.3.6.1.4.1.495.2.1.6.50.40.1 |
vrSrIndexSystem route index.
Range of Values: From 1 to 1024ro INTEGER .1.3.6.1.4.1.495.2.1.6.50.40.1.1 |
vrSrRowStatusIndicates whether this specific entry is configured within the MIB.
Entries (rows) may be created by setting this object value to 'valid',
or deleted by changing this object value to 'invalid'.
Options:
invalid (1): Entries can be deleted
valid (2): Entries can be createdrw Enumeration .1.3.6.1.4.1.495.2.1.6.50.40.1.2 |
vrSrDestAliasDestination string.rw Alias .1.3.6.1.4.1.495.2.1.6.50.40.1.3 |
vrSrSubRefSub-reference number for multi-protocol encapsulation.
Range of Values: From 1 to 31
Default Value: 1rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.40.1.10 |
vrSrBandwidthMaximum Bandwidth allowed for the FR Link in Kbps.
Note: If set to zero (0) bandwidth management is disabledrw INTEGER .1.3.6.1.4.1.495.2.1.6.50.40.1.20 |
vrSrBwIndexThe index for bandwidth that corresponds to the vrBwEntryrw INTEGER .1.3.6.1.4.1.495.2.1.6.50.40.1.21 |
vrSrStatusCurrent VR system route status.
Options:
vrSrDown (1):
vrSrInFlowCtl (2):
vrSrUp (3):ro Enumeration .1.3.6.1.4.1.495.2.1.6.50.40.1.30 |
vrSrConStatusCurrent status of the connection establishment through IAM.
Options:
vrNotConfigured (1):
vrClose (2):
vrWaitForQuery (3):
vrWaitForOpenConf (4):
vrOpen (5):ro Enumeration .1.3.6.1.4.1.495.2.1.6.50.40.1.31 |
vrSrFailStatusCurrent fail status of the connection establishment through IAM.
Options:
vrNoFailure (1):
vrInternalError (2):
vrLocalMemFail (3):
vrRemMemFail (4):
vrRemNoAcces (5):
vrRemPvcDown (6):
vrRemPvcBusy (7):
vrLocalFcnFailure (8):
vrRemFcnFailure (9):
vrLocalDsnFailure (10):
vrRemAliasNotFound (11):
vrNoPvcService (12):
vrOpenReqTimeout (13):
vrAdjaReset (14):
vrUnsupportedSR (15):ro Enumeration .1.3.6.1.4.1.495.2.1.6.50.40.1.32 |
vrSrNbLinkDownThe number of times that the system route has received a 'LINK_DOWN'
with no route available notification.ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.50 |
vrSrNbResetFrameRxNumber of reset frames received.ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.51 |
vrSrNbOutboundFrameNumber of outbound frames (Voice/FAX, signaling and VR applications).ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.52 |
vrSrNbInboundFrameNumber of inbound frames (Voice/FAX, signaling and VR applications).ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.53 |
vrSrNbOutboundBwOutbound WAN bandwidth required in BPS; this figure include the DLCI,
the proprietary header for encapsulation (if used) and the CRC. The refresh
period of that object depends on the stsmp object int the vrConfig group.ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.54 |
vrSrNbInboundBwInbound WAN bandwidth required in BPS; this figure include the DLCI, the
proprietary header for encapsulation (if used) and the CRC. The refresh
period of that object depends on the stsmp object int the vrConfig group.ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.55 |
vrSrBwUsedThe bandwidth utilized in kilo BPS. This value is shown only if the
bandwith management for this Source Route is enabled.ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.56 |
vrSrNbCallsThe number of outstanding voice calls on this Vr Source Route. This value
is shown only if the bandwith management for this Source Route is enabled.ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.57 |
vrSrNbPktDroppedThe number of packets discarded due to Bandwidth management. When the
bandwidth utilized on this VR Source Route reaches to its maximum bandwidth
allowance, then this value represents the number of Voice packets discarded
due to this fact.ro Counter .1.3.6.1.4.1.495.2.1.6.50.40.1.58 |
vrRouteTableThe Voice Routing table. SEQUENCE OF VrRouteEntry .1.3.6.1.4.1.495.2.1.6.50.50 |
vrRouteEntryAn entry in the Voice Routing Table. VrRouteEntry .1.3.6.1.4.1.495.2.1.6.50.50.1 |
vrRouteDialNoTable index.ro INTEGER .1.3.6.1.4.1.495.2.1.6.50.50.1.1 |
vrRouteRowStatusIndicates whether this specific entry is configured within the MIB.
Entries (rows) may be created by setting this object value to 'valid',
or deleted by changing this object value to 'invalid'.
Options:
invalid (1): Entries can be deleted
valid (2): Entries can be createdrw Enumeration .1.3.6.1.4.1.495.2.1.6.50.50.1.2 |
vrRouteMaskThe selection of the mask will dictate which of the digits will be read.
A zero (0) means that the digit in that position will not be read. A one (1)
means that the digit in that position will be read.
Range of Values:
0000000
1000000
1100000
1110000
1111000
1111100
1111110
1111111
Default Value: 1111111rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.50.1.10 |
vrRouteSrNumberVR system route number to use for the outbound traffic.
Range of Values: From 1 to 1024rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.50.1.11 |
vrRouteForwardedPktThe number of voice packets forwarded over the WAN.ro Counter .1.3.6.1.4.1.495.2.1.6.50.50.1.50 |
vrPingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.6.50.60 |
vrPingDialNoDial number to ping.
Range of Values: From 0 to 9999999rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.60.1 |
vrPingNbToBeSentNumber of pings to send after the trigger. (4,000,000 would mean one packet
sent every 24 ms for 24 hours). 0 means stop the current ping session.
Range of Values: From 0 to 4,000,000
Default Value: 1rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.60.2 |
vrPingGapsInMsThe interval in milliseconds between ping frames.
Range of Values: From 0 to 1000
Default Value: 24rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.60.3 |
vrPingMaxHopCountMaximum Hop count allowed.
Range of Values: From 1 to 256
Default Value: 16rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.60.4 |
vrPingProbeReturnAddressProbe (i.e. ping/trace/search) return dial number.
Range of Values: From 0 to 9999999
Default Value: 9999999rw INTEGER .1.3.6.1.4.1.495.2.1.6.50.60.5 |
vrPingTriggerSendTrigger the pings to be sent.
Options:
vrIdle (1): No pings are sent
vrSend (2): The counter is set to zero and pings will be sentrw Enumeration .1.3.6.1.4.1.495.2.1.6.50.60.6 |
vrPingNbReplyRxCount the number of ping replies receivedro Counter .1.3.6.1.4.1.495.2.1.6.50.60.30 |
vrPingFormatErrorCount the number of non-recognizable ping replies.ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.31 |
vrPingNbVrNodesCrossedForwardThe number of nodes hopped outbound (forward). When compared to the
number of hops inbound (backward) the difference can help trace the
path.ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.32 |
vrPingNbVrNodesCrossedBackwardThe number of nodes hopped inbound (Backward). When compared to the
number of hops outbound (forward) the difference can help trace the
path.ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.33 |
vrPingLastRoundTripInMsThe time in milliseconds that the ping took for its last round-trip.ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.34 |
vrPingLastSequenceNumberRxThe sequence number of the last ping received.ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.35 |
vrPingSequenceErrorThe sequence number of the last error received. Not available if the
number of pings is set to one.ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.36 |
vrPingMinRoundTripInMsThe Minimum round trip time in milliseconds. This is not applicable if
pinging is set to one (1).ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.37 |
vrPingMaxRoundTripInMsthe Maximum round trip time in milliseconds. this is not applicable if
pinging is set to one (1).ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.38 |
vrPingRemStatusThe ping returns the status of the remote node.
Options:
vrOk (1): The remote is OK
vrUnknown (5): Status unknown, there is no response.ro Enumeration .1.3.6.1.4.1.495.2.1.6.50.60.39 |
vrPingRemVrNodeIdDisplays the remote node ID.
Range of Values: From 0 to 31ro DisplayString .1.3.6.1.4.1.495.2.1.6.50.60.40 |
vrPingRemVceStationIdDisplays the remote VCE station ID.
Range of Values: from 0 to 15ro DisplayString .1.3.6.1.4.1.495.2.1.6.50.60.41 |
vrPingRemVrSoftIdDisplays the remote VR software version number.
Range of Values: From 0 to 3ro DisplayString .1.3.6.1.4.1.495.2.1.6.50.60.42 |
vrPingRemVceSoftIdDisplays the remote VCE software version number.ro DisplayString .1.3.6.1.4.1.495.2.1.6.50.60.43 |
vrPingRemSlotIndexThe remote VCE slot number of the registered numberro INTEGER .1.3.6.1.4.1.495.2.1.6.50.60.44 |
vrPingRemHuntChannelDisplays the remote hunt channel number.
Range of Values: From 0 to 8ro DisplayString .1.3.6.1.4.1.495.2.1.6.50.60.45 |
vrPingRemNbForwardedPacketNumber of forwarded packets using that route definition block.ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.46 |
vrPingRemNbRestartNo of times the attached VCE has restarted.ro Counter .1.3.6.1.4.1.495.2.1.6.50.60.47 |
vrBwTableThe Voice Routing Bandwidth Management table. SEQUENCE OF VrBwEntry .1.3.6.1.4.1.495.2.1.6.50.70 |
vrBwEntryAn entry in the Voice Routing Bandwidth Management Table. VrBwEntry .1.3.6.1.4.1.495.2.1.6.50.70.1 |
vrBwIndexTotal bandwidth index.
Range of Values: From 1 to 32ro INTEGER .1.3.6.1.4.1.495.2.1.6.50.70.1.1 |
vrBwRowStatusIndicates whether this specific entry is configured within the MIB.
Entries (rows) may be created by setting this object value to 'valid',
or deleted by changing this object value to 'invalid'.
Options:
invalid (1): Entries can be deleted
valid (2): Entries can be createdrw Enumeration .1.3.6.1.4.1.495.2.1.6.50.70.1.2 |
vrBwBandwidthCfgMaximum Bandwidth allowed for the FR Link in Kbps.
Note: If set to zero (0) bandwidth management is disabled
Default: 0 (disabled)
Range of Values: From 0 to 65535rw INTEGER (0.. 65535) .1.3.6.1.4.1.495.2.1.6.50.70.1.3 |
vrBwBandwidthUsedTotal bandwidth used on the FR Link in Kbps.
Range of Values: From 0 to 65535ro INTEGER (0.. 65535) .1.3.6.1.4.1.495.2.1.6.50.70.1.10 |
vrBwNbCallsTotal number of outstanding Voice sessions on that FR Link
Range of Values: From 0 to 65535ro INTEGER (0.. 65535) .1.3.6.1.4.1.495.2.1.6.50.70.1.11 |
vrBwNbPktDroppedThe number of packets discarded due to Bandwidth management. When the
bandwidth utilized on this VR Global Bandwidth management entry reaches to
its maximum bandwidth allowance, then this value represents the number of
Voice packets discarded due to this fact.ro Counter .1.3.6.1.4.1.495.2.1.6.50.70.1.12 |
vrRegEntryAn entry in the Voice Routing Group Table. VrRegEntry .vrRegTable.1 |
vrRegDialNoThis is the table index.ro INTEGER .vrRegTable.1.10 |
vrRegStateCurrent registration state.
Options:
vrOk (1):
vrAgedOut (2):
vrTableFull (3):
vrMemallocFail (4):
Default Value: Nonero Enumeration .vrRegTable.1.11 |
vrRegVceStationIdDisplays the Station ID name.
Range of Values: From 0 to 15ro DisplayString .vrRegTable.1.12 |
vrRegVceSoftIdDisplays the VCE software ID name.
Range of Values: From 0 to 15 alphanumeric characters.ro DisplayString .vrRegTable.1.13 |
vrRegSlotNoThis parameter displays the slot number in which the VCE CPU resides.
Range of Values: From 1 to 16
Default Value: Nonero INTEGER .vrRegTable.1.14 |
vrRegHuntChannelThe string that represents the Hunt Channel number in 32 bits wide bit
map in hexadecimal format.
Range of Values: From 0 to 8ro DisplayString .vrRegTable.1.15 |