CXMCVOX-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
538
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
538 total| Object Name |
|---|
cxMcVox OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2 |
IMPORTS Unknown .1.3.6.1.4.1.495.2.1.1.2 |
cxMcVoxTrapStatusReports that there is a change in the functional state of the voice
channel.
cxMcVoxTrapStatus = 1 if the port is disabled
cxMcVoxTrapStatus = 2 if the port is enabled
cxMcVoxTrapStatus = 3 if there is no I/O hardware TRAP-TYPE .1.3.6.1.4.1.495.2.1.1.2.0.1 |
cxMcVoxTrapRingReports that there is a change in the functional state of the ring
generator power supply.
cxMcVoxTrapRing = 2 if the ringing generator is good
cxMcVoxTrapRing = 1 otherwise TRAP-TYPE .1.3.6.1.4.1.495.2.1.1.2.0.2 |
cxMcVoxTrapDcReports that there is a change in the functional state of the DC power
supply.
cxMcVoxGlobalTensionDc = 2 if the DC power supply is good
cxMcVoxGlobalTensionDc = 1 otherwise TRAP-TYPE .1.3.6.1.4.1.495.2.1.1.2.0.3 |
cxMcVoxHistoryTrapInforms the management station of the fact that the history table needs
servicing. TRAP-TYPE .1.3.6.1.4.1.495.2.1.1.2.0.4 |
cxMcVoxGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.1 |
cxMcVoxGlobalAdmPathLngobsolete. The ReinitNet/ReinitPath commands have been replaced by
ReinitRouting.rwobsolete INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.1 |
cxMcVoxGlobalReinitPathThe ReinitNet/ReinitPath commands have been replaced by ReinitRouting.rwobsolete Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.2 |
cxMcVoxGlobalClearPathPath ID no longer exists with the new voice routing scheme
Determines whether to restore all administrative Path IDs to the default
factory settings.
The setting of this object is dynamic. When set to 'yes' all
administrative Path IDs will immediately change to the factory defaults.
Options:
no (1)
yes (2)
Default Value: no (1)
Configuration Change: administrative
(Voice Routing or VR).rwdeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.3 |
cxMcVoxGlobalReinitNetThe ReinitNet/ReinitPath commands have been replaced by
ReinitRouting.rwobsolete Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.4 |
cxMcVoxGlobalClearNetNetwork ID no longer exists in the new voice routing scheme (Voice
Routing or VR).
Determines whether to restore all administrative routing entries (i.e.
network routing entries, Path IDs and Group IDs) to the default factory
settings.
The setting of this object is dynamic. When set to 'yes' all
administrative routing entries will immediately change to the factory
defaults.
Options:
no (1)
yes (2)
Default Value: no (1)
Configuration Changed: administrativerwdeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.5 |
cxMcVoxGlobalAdmLocalIdDetermines the administrative ID (name) for the local voice station.
Note:
This object must be defined in order to obtain a successful voice
connection.
Range of Values: a maximum of 10 alphanumeric characters in upper-case
only. You can use any combination of letters and numbers; however you
cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.1.6 |
cxMcVoxGlobalOpeLocalIdDisplays the operative ID (name) for the local voice station.
Note: This object must be defined in order to obtain a successful voice
connection.
You cannot modify this object. If you want to change the ID you must
modify the object cxMcVoxGlobalAdmLocalId (of this table).
Range of Values: a maximum of 10 alphanumeric characters in upper-case
only. You can use any combination of letters and numbers; however you
cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.1.7 |
cxMcVoxGlobalTensionRingDisplays the state of the ring generator power supply. The power supply
resides on the ring generator card located on the voice I/O card.
You cannot modify this object.
Options:
down (1)
up (2)
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.8 |
cxMcVoxGlobalTensionDcDisplays the state of the DC power supply on the voice I/O card.
Options:
down (1): The DC power supply on the voice I/O card is down.
up (2):The DC power supply on the voice I/O card is up.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.9 |
cxMcVoxGlobalTrapRingDetermines if the ring generator power supply trap is generated.
The setting of this object is dynamic. When set to 'enable', the SNMP
agent immediately begins to monitor the ring generator power supply.
Options:
disable (1): No trap is generated.
enable (2): Causes a trap message to be sent to the network management
console each time a change occurs in the functional state (i.e., up or
down) of the ring generator power supply.
Default Value: disable (1)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.10 |
cxMcVoxGlobalTrapDcDetermines if the DC power supply trap is generated. The setting of this
object is dynamic. When set to 'enable', the SNMP agent immediately begins
to monitor the DC power supply.
Options:
disable (1): No trap is generated.
enable (2): Causes a trap message to be sent to the network management
consoleto each time a change occurs in the functional state (i.e., up or
down) of the voice I/O card DC power supply.
Default Value: disable (1)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.11 |
cxMcVoxGlobalAdmGrpNbPollThe maximum number of remote voice station(s) that the the local voice
station polls within a single call request has been moved from the Global
Parameters group to the Group ID Entries group.
Determines the maximum number of remote voice stations that the local
voice station polls with a single call request.
Note: This object is only relevant if at least one Group ID has been
defined using the objects in the cxMcVox Administrative Grp Group.
Range of Values: 1 to 20
Default Value: 4
Configuration Changed: administrativerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.12 |
cxMcVoxGlobalOpeGrpNbPollThe the maximum number of remote voice stations the local voice station
polls with a single call request. has been moved from the Global
Parameters group to the Group ID Entries group.
Displays the maximum number of remote voice stations the local voice
station polls with a single call request.
Note: This object is only relevant if at least one Group ID has been
defined with the objects in the cxMcVox Administrative Grp Group Table.
You cannot modify this object. If you want to change this value you must
modify the object cxMcVoxGlobalAdmNbPoll (of this table).
Range of Values: 1 to 20
Default Value: 4rodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.13 |
cxMcVoxGlobalClearGrpDetermines whether to restore all administrative Group IDs to the default
factory settings.
The setting of this object is dynamic. When set to 'yes' all
administrative Group IDs will immediately change to the factory defaults.
Options:
no (1)
yes (2)
Default Value: no
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.14 |
cxMcVoxGlobalOpePathLngThe Operational Path Length commands are now in the Operational Path
table.roobsolete INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.15 |
cxMcVoxGlobalReinitRoutingTriggers the reinitialization of the operative routing table.
The setting of this object is dynamic. When set to 'yes', all
administrative routing, path and group entries will be written to the
operative routing table (i.e. will be in the active global configuration).
Options:
no (1)
yes (2)
Default Value: no (1)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.16 |
cxMcVoxGlobalForceDefConfigDetermines whether the default factory configuration will replace both
the administrative and operative configurations.
The setting of this object is dynamic. When set to 'yes', this object
triggers the immediate reconfiguration of all objects to the default
factory settings.
Options:
no (1)
yes (2)
Default Value: no (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.17 |
cxMcVoxGlobalReinitPinTableSaves the PIN table configuration in non-volatile memory, but only enables
it if the object cxMcVoxGlobalAdmEnablePinTable is set to 'yes'.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.18 |
cxMcVoxGlobalAdmEnablePinTableSpecifies whether the voice station verifies PIN (Personal Identification
Numbers) codes before allowing a connection to be established.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.19 |
cxMcVoxGlobalOpeEnablePinTableDisplays the operational state of PIN verification.
Options:
no (1)
yes (2)
Default Value: no (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.20 |
cxMcVoxGlobalReinitCodesTableCopy the planned zone code configuration table into active zone code
table (non-volatile memory).
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.21 |
cxMcVoxGlobalAdmEnableCodesTableThe CX900 does not currently support this object.
Specifies whether the voice station verifies incoming telephone codes
against its internal remote translation table.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.22 |
cxMcVoxGlobalOpeEnableCodesTableThe CX900 does not currently support this object.
Displays the operational state of the remote translation table.
Options:
no (1)
yes (2)
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.23 |
cxMcVoxGlobalSoftRevDisplays the software revision of the local voice station .
You cannot modify this object. It is a display that the software provides.
Range of Values: a maximum of 30 alphanumeric characters
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.1.24 |
cxMcVoxGlobalGlmInBetwReqTimeWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 2000
Default Value: 500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.100 |
cxMcVoxGlobalGlmMaxTimeToTxReqWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 20000
Default Value: 1500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.101 |
cxMcVoxGlobalGlmInBetwRespTimeWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 20000
Default Value: 500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.102 |
cxMcVoxGlobalGlmMaxTimeToTxRespWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 20000
Default Value: 1500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.103 |
cxMcVoxGlobalGlmVoiceSilenceTimeWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 100 to 60000
Default Value: 3000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.104 |
cxMcVoxGlobalGlmSupervSilenceTimeWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 1000 to 60000
Default Value: 3000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.105 |
cxMcVoxGlobalGsdAutoCnctDelayWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 1 to 20000
Default Value: 1rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.106 |
cxMcVoxGlobalClearLclExtClears Local Extensions after the next Reset. Planned Local Extensions
are cleared immediately.
Options:
no (1): Local Extensions are not cleared.
yes (2): Local Extensions are cleared.
Default Value: no (1)
Configuration Change: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.107 |
cxMcVoxGlobalClearRmtExtClears Remote Extensions after the next Reset. Planned Remote Extensions
are cleared immediately.
Options:
no (1): Remote Extensions are not cleared.
yes (2): Remote Extensions are cleared
Default Value: no (1)
Configuration Change: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.108 |
cxMcVoxGlobalWanSlotDetermines the slot number of the FR600 card that is performing Voice
Routing with the new Voice Routing scheme.
Range of Values: 1 to 16
Default Value: 1rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.109 |
cxMcVoxGlobalNetNbDigitsDetermines the number of digits used to represent Local Extensions,
Remote Extensions and Remote Extension group IDs.
Range of Values: 1 to 4
Default Value: 3rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.110 |
cxMcVoxMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.111 |
cxMcVoxGlobalRecogAccThis specifies whether to recognize the defined Access Code. With the
option enabled, if the Access Code is recognized, it is stripped from the
dialing digit flow and then the remaining digits are interpreted as the
code that has been really dialed.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.112 |
cxMcVoxGlobalAccCodeDetermines the numeric code to access the international network.
Range of Values: 1 to 5 numeric digits
Default Value: 011
Configuration Changed: operationalrw DisplayString .1.3.6.1.4.1.495.2.1.1.2.1.113 |
cxMcVoxGlobalAccCodeLngDetermines the number of digits in the configured Access Code.ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.114 |
cxMcVoxGlobalAdmPinCodeLngDetermines the administrative number of digits in all Personal
Identification Numbers (PINs).rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.115 |
cxMcVoxGlobalOpePinCodeLngDetermines the operational number of digits in all Personal
Identification Numbers (PINs).ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.116 |
cxMcVoxGlobalClearHistoryTableDetermines whether to clear ALL logging information from the history table.
Options:
disable(1): No action
enable(2): Clear history table completelyrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.117 |
cxMcVoxGlobalHistoryMaxNumberOfEntriesThe maximum number of entries in the history table.rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.118 |
cxMcVoxGlobalHistoryPercentageFullThe percentage of the history table that must be filled before a trap is
sent to the management station.rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.119 |
cxMcVoxGlobalTrapHistoryDetermines if the call history trap is generated.
The setting of this object is dynamic. When set to 'enable', the SNMP
agent immediately begins to monitor the call history trap.
Options:
disable (1): No trap is generated.
enable (2): Causes a trap message to be sent to the network management
console each time a change occurs in the functional state (i.e., up or
down) of the ring generator power supply.
Default Value: disable (1)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.1.120 |
cxMcVoxGlobalLseTimerT2WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 65535
Default Value: 500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.121 |
cxMcVoxGlobalLseTimerT3WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 65535
Default Value: 550rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.122 |
cxMcVoxGlobalExtBitMaskThis object is a bitmap that selects up to
cxMcVoxGlobalNetNbDigits, which can be set up to
4 digits, corresponding to a bit that is set. The default
value corresponds to 7 (or 00000111 in binary).
Range of Values: 0 to 255
Default Value: 7rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.1.123 |
cxMcVoxCfgTableVoice station configuration Table. SEQUENCE OF CxMcVoxCfgEntry .1.3.6.1.4.1.495.2.1.1.2.2 |
cxMcVoxCfgEntryVoice station configuration row definition. CxMcVoxCfgEntry .1.3.6.1.4.1.495.2.1.1.2.2.1 |
cxMcVoxCfgCardIndexDisplays the slot number of the voice I/O card.
You cannot modify this object.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 8
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.2.1.1 |
cxMcVoxCfgPortIndexDisplays the number of the voice port.
You cannot modify this object.
Options:
CX900: 1 is the only acceptable value. Each I/O card only has 1 port.
CX1000: up to 15 for the DI600
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.2.1.2 |
cxMcVoxCfgDriverAdmUsedDetermines the administrative driver of the port. The driver controls
which signals the port supports. A port can only support one type of
driver at any one time.
Depending on the type of driver you choose, you must perform further
configuration using one of the following tables:
- cxMcVoxEmAdmtable (for E&M drivers) - cxMcVoxFxsAdmTable (for FXS
drivers) - cxMcVoxFxoAdmTable (for FXO drivers)
Options:
em (1): Recommended for a PBX connection. Provides RJ-12 and PB-45 port
connectors.
fxs (2): Recommended for a standard telephone connection, where the
Memotec device simulates a Telco. The device provides the ring and dial
tone. FXS can also be used for a PBX connection, and provides an RJ-12
port connector.
fxo (3): Recommended for a standard telephone connection, where the
Memotec device simulates a telephone. FXO can also be used for a PBX
connection, and provides an RJ-12 port connector.
Default Value: fxs (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.3 |
cxMcVoxCfgDriverOpeUsedDisplays the operative driver currently running on the port.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxCfgDriverAdmUsed (of this table).
Options:
em (1)
fxs (2)
fxo (3)
Default Value: fxs (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.4 |
cxMcVoxCfgTrapOnLineDetermines the state of the port's online trap.
When set to 'enable', every time a fax or phone call begins (i.e. the
port switches from online to offline), the SNMP agent generates a trap and
sends it to the network management console.
The setting of this object is dynamic. When set to'enable' the SNMP agent
immediately begins to monitor the port.
Options:
disable (1)
enable (2)
Default Value: disable (1)
Configuration Changed: operativerwdeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.5 |
cxMcVoxCfgTrapOffLineDetermines the state of the port's offline trap.
When set to 'enable', every time a fax or phone call ends ( i.e. the port
switches from offline to online) the SNMP agent generates a trap and sends
it to the network management console.
The setting of this object is dynamic. When set to'enable' the SNMP agent
immediately begins to monitor the port.
Options:
disable (1)
enable (2)
Default Value: disable (1)
Configuration Changed: operativerwdeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.6 |
cxMcVoxCfgTrapStatusDetermines the state of the port's status trap.
When set to 'enable', every time the functional state of the voice channel
changes (i.e. up or down) the SNMP agent generates a trap and sends it to
the network management console.
The setting of this object is dynamic. When set to'enable' the SNMP agent
immediately begins to monitor the voice channel.
Options:
disable (1)
enable (2)
Default Value: disable (1)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.7 |
cxMcVoxCfgTrapStateDetermines the state of the port's outgoing calls trap.
When set to 'enable', every time an outgoing call request is in process
the SNMP agent generates a trap and sends it to the network management
console.
The setting of this object is dynamic. When set to'enable' the SNMP agent
immediately begins to monitor the port.
Options:
disable (1)
enable (2)
Default Value: disable (1)
Configuration Changed: operativerwdeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.8 |
cxMcVoxCfgTestPortDetermines the state of the port's self test.
When set to 'yes', this object triggers the port to intiate a self-test.
The port examines various hardware components, for example the RAM, DPRAM
and I/O access. Each test runs for less than 2 seconds. You can perform
the test on either an open (call in progress) or closed channel. If you
perform the test on an open channel the call that is in progress is
disconnected. The user must place the call again after the test is
complete.
Note:
The port must be set to 'enable' (using the object cxMcVoxEmAdmPortStatus,
cxMcVoxFxoAdmstatus or cxMcVoxFxsAdmStatus) to be able to perform the
self-test.
You can view the results of the test in the cxMcVoxStatusTable.
While the port is running a self-test, it is not functional. It will
return to normal when the test is complete.
The setting of this object is dynamic. When set to'yes' the port
immediately begins to monitor itself.
Options:
no (1)
yes (2)
Default Value: no (1)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.9 |
cxMcVoxCfgToneTestDetermines the state of the port's standard tone test (1004Hz).
When set to 'enable', this object triggers the port to perform a tone
test. The port tests its voice sound quality by transmitting a 1004Hz
tone. You can perform the test on either an open (call in progress) or
closed channel. However, if you initiate the test on an open channel, the
connection is not disrupted, but the local user will not be able to hear
the remote user. The local user will only hear the tone the test
generates. You must set this object to 'disable' to stop the test. It does
not stop on its own.
The setting of this object is dynamic. When set to'enable' the tone test
begins immediately.
Options:
disable (1)
enable (2)
Default Value: disable (1)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.10 |
cxMcVoxCfgReinitPortDetermines the port's reinitialization state.
The setting of this object is dynamic. When set to 'yes', this object
triggers the port to write all administrative port configuration entries
to the operative port configuration table (i.e. they will be in the active
port configuration).
Options:
no (1)
yes (2)
Default Value: no (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.11 |
cxMcVoxCfgClearPortDetermines whether to restore all administrative voice port
configurations to the default factory settings.
The setting of this object is dynamic. When set to 'yes' the configuration
of the administrative voice port (as displays in the objects
cxMcVoxCfgCardIndex and cxMcVoxCfgPortIndex) will immediately change to
the factory defaults.
Options:
no (1)
yes (2)
Default Value: no (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.2.1.12 |
cxMcVoxCfgOpeAcelpRevDisplays the ACELP software revision currently running on the operative
voice channel.
Range of Values: 0 to 12 alphanumeric characters. You can use any
combination of letters and numbers, however you cannot use blank spaces.
Use a dash or underscore as a delimiter.
Default Value: ACELP-2.BINro DisplayString .1.3.6.1.4.1.495.2.1.1.2.2.1.14 |
cxMcVoxCfgCmdImmTestWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 4294967295
Default Value: 0rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.2.1.15 |
cxMcVoxCfgCmdTestWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 4294967295
Default Value: 0rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.2.1.16 |
cxMcVoxCfgMaxPktFrameThe number of voice packet included in a voice frame. Less voice
packet there is in a frame, bigger is the bandwitdh overhead on the
WAN link, but better is the voice path end-to-end delay. The best
compromise is a size of two (2) voice packets per voice frame, which
correpsond to the default value.rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.2.1.17 |
cxMcVoxCfgMaxSkewThe number of msec of skew that the end-to-end synchronization
algorithm must compensate.rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.2.1.18 |
cxMcVoxStatAndLog OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.3 |
cxMcVoxStatusTableVoice station status table. SEQUENCE OF CxMcVoxStatusEntry .1.3.6.1.4.1.495.2.1.1.2.3.1 |
cxMcVoxStatusEntryVoice station status row definition. CxMcVoxStatusEntry .1.3.6.1.4.1.495.2.1.1.2.3.1.1 |
cxMcVoxStatusCardNumberDisplays the slot number of the voice I/O card.
You cannot modify this object. It is a display that the software provides.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 8
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.1.1.1 |
cxMcVoxStatusPortNumberDisplays the number of the voice I/O port.
You cannot modify this object. It is a display that the software provides.
Options:
CX900: 1 is the only acceptable value. Each I/O card only has 1 port.
CX1000: up to 15 for the DI600
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.1.1.2 |
cxMcVoxStatusPortStatusDisplays the functional status of the port.
You cannot modify this object. It is a display that the software provides.
Options:
disable (1): port is not functional
enable (2): port is up and active
no-voice-io (3): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-1 (31): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-2 (32): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-3 (33): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-4 (34): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-1 (41): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-2 (42): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-3 (43): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-4 (44): Memotec use only. Contact Memotec service personnel if
this value displays.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.3 |
cxMcVoxStatusHookLocalDisplays the state of the local port's ability to establish a connection.
When the status shows 'on', the port is idle and ready to transmit.
You cannot modify this object. It is a display that the software provides.
Options:
on (1): port is in the on-hook state and is able to establish a
connection.
off (2): port is in the off-hook state and cannot establish a connection.ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.4 |
cxMcVoxStatusHookRemDisplays the state of the remote port's ability to establish a
connection. When the status shows 'on', the remote port is idle and ready
to transmit.
You cannot modify this object. It is a display that the software provides.
Options:
on (1): port is in the on-hook state and is able to establish a
connection.
off (2): port is in the off-hook state and cannot establish a connection.
unknown (3)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.5 |
cxMcVoxStatusIoAccessDisplays the results of the test that the CPU performs on the
accessibility of the voice channel control registers residing on the voice
I/O card.
This object displays results from the self-test which you initiate using
the object cxMcVoxCfgtestPort (of the cxMcVox Configuration Group table).
You cannot modify this object.
Options:
fault (1): CPU cannot access the voice channel registers on the voice I/O
card. Contact Memotec service personnel.
passed (2): CPU is able to access the voice channel registers on the voice
I/O card.
inapplicable (3): self-test has not been run since last system reset.
running (4): self-test is currently running. Results are not yet
available.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.6 |
cxMcVoxStatusChannelAccessDisplays the results of the test the CPU performs on the DPRAM.
This object displays results from the self-test which you initiate using
the object cxMcVoxCfgtestPort (of the cxMcVox Configuration Group table).
You cannot modify this object.
Options:
fault (1): CPU cannot access the DPRAM. Contact Memotec service personnel.
passed (2): CPU is able to access DPRAM.
inapplicable (3): self-test has not been run since last system reset.
running (4): self-test is currently running. Results are not yet
available.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.7 |
cxMcVoxStatusDspRamDisplays the results of the test the DSP performs on the accessibility of
the RAM memory on the voice I/O card.
This object displays results from the self-test which you initiate using
the object cxMcVoxCfgtestPort (of the cxMcVox Configuration Group table).
You cannot modify this object.
Options:
fault (1): DSP cannot access the RAM memory on the voice I/O card. Contact
Memotec service personnel.
passed (2): DSP is able to access RAM memory.
inapplicable (3): self-test has not been run since last system reset.
running (4): self-test is currently running. Results are not yet
available.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.8 |
cxMcVoxStatusDspDpramDisplays the results of the test the DSP performs on the voice I/O card's
DPRAM memory.
This object displays results from the self-test which you initiate using
the object cxMcVoxCfgtestPort (of the cxMcVox Configuration Group table).
You cannot modify this object.
Options:
fault (1): DSP cannot access the DPRAM memory on the voice I/O card.
Contact Memotec service personnel.
passed (2): DSP is able to access DPRAM memory on the voice I/O card.
inapplicable (3): self-test has not been run since last system reset.
running (4): self-test is currently running. Results are not yet
available.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.9 |
cxMcVoxStatusSamplingTimeDisplays the results of the test the DSP performs on the sampling rate of
a voice stream. The DSP tests that the sampling rate is done at 8KHz.
This object displays results from the self-test which you initiate using
the object cxMcVoxCfgtestPort (of the cxMcVox Configuration Group table).
You cannot modify this object.
Options:
fault (1): DSP cannot test sampling rate. Contact Memotec service
personnel.
passed (2): DSP is able to test sampling rate and it is at 8KHz.
inapplicable (3): self-test has not been run since last system reset.
running (4): self-test is currently running. Results are not yet
available.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.10 |
cxMcVoxStatusWatchdogDisplays the results of the test the CPU performs on the watchdog timer
which resides on the voice I/O card.
This object displays results from the self-test which you initiate using
the object cxMcVoxCfgtestPort (of the cxMcVox Configuration Group table).
You cannot modify this object.
Options:
fault (1): CPU cannot access the watchdog timer. Contact Memotec service
personnel.
passed (2): CPU is able to access watchdog timer and it is performing
properly.
inapplicable (3): self-test has not been run since last system reset.
running (4): self-test is currently running. Results are not yet
available.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.11 |
cxMcVoxStatusRemPortStatusDisplays the channel number of the attached remote port.
You cannot modify this object.
Range of Values: 0-4294967295ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.1.1.12 |
cxMcVoxStatusInputDbmLevelDisplays the current Dbm level of the input analog voice signal.
You cannot modify this object. .
Range of Values: 700 to 1050 (-30dBm to 5dBm)
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.1.1.13 |
cxMcVoxStatusPhyIfTypero Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.14 |
cxMcVoxStatusDspUtilizationWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 1000
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.1.1.100 |
cxMcVoxStatusIOResetStateWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Options:
in-reset (1)
normal (2)
unknown (3)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.1.1.101 |
cxMcVoxEventTableOnLine/OffLine events table for incoming/outgoing calls.deprecated SEQUENCE OF CxMcVoxEventEntry .1.3.6.1.4.1.495.2.1.1.2.3.2 |
cxMcVoxEventEntryOnline/Offline events row definition.deprecated CxMcVoxEventEntry .1.3.6.1.4.1.495.2.1.1.2.3.2.1 |
cxMcVoxEventCardNumberDisplays the slot number of the voice I/O card.
You cannot modify this object.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 4
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.2.1.1 |
cxMcVoxEventPortNumberDisplays the number of the voice I/O port.
You cannot modify this object.
Options:
CX900: 1 is the only acceptable value. Each I/O card only has 1 port.
CX1000: 1 or 2
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.2.1.2 |
cxMcVoxEventLogIndexDisplays the index number of the event log.
You cannot modify this object.
Range of Values: 1 to 4294967295
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.2.1.3 |
cxMcVoxEventDateAndTimeOnLineDisplays the date and time of the last online event. An online event is
any incoming or outgoing call that the voice station generates. The format
of the display is as follows:
Year/Month/Date-Day-Hours:Minutes:Seconds
You cannot modify this object.
Range of Values:
Year: 0-99
Month: 1-12
Date: 1-31 (day of the month)
Day : 0-6 (day of the week - 0 being Sunday)
Hours: 0-23
Minutes: 0-59
Seconds: 0-59
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.3.2.1.4 |
cxMcVoxEventDateAndTimeOffLineDisplays the date and time of the last offline event. An offline event is
any incoming or outgoing call that the voice station terminates. The
format of the display is as follows:
Year/Month/Date-Day-Hours:Minutes:Seconds
You cannot modify this object.
Range of Values:
Year: 0-99
Month: 1-12
Date: 1-31 (day of the month)
Day : 0-6 (day of the week - 0 being Sunday)
Hours: 0-23
Minutes: 0-59
Seconds: 0-59
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.3.2.1.5 |
cxMcVoxEventPhoneNumberDisplays the phone number (including any voice mail digits) the user
enters to reach a remote telephone or fax machine. This object is
irrelevant for incoming calls.
You cannot modify this object.
Range of Values: 1 to 32 numeric digits
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.3.2.1.6 |
cxMcVoxEventLnkStateDisplays the status of the link to the remote telephone or fax machine.
You cannot modify this object.
Options:
remUnavailable (1): the routing specifies a remote chassis location that
does not exist.
remError (2): all voice ports at the specified remote are inactive and
therefore cannot accept the call. It is possible that the remote ports are
disabled or that the I/O card is not installed.
busy (3): all voice ports at the specified remote are busy and therefore
unavailable to accept the call.
open (4): the call was successfully put through to a voice port at the
remote location.
errActiveChn (5): the end-user has replaced the receiver (on-hook) at the
end of a call and then removed the receiver (off-hook) so quickly that the
connection has not had sufficient time to completely disconnect. The
end-user should wait a few seconds after replacing the receiver before
attempting to place another call.
errPath (6): the Path ID (dialing code) the user entered is not listed in
the routing table. Check that the Path ID and routing are completely
configured.
errLnk (7): there is an error condition on the line between the local and
remote link stations causing the link to be inactive.
fixedLnkDown (8): Memotec use only. Contact Memotec service personnel if
this value displays.
fixedLnkUp (9): Memotec use only. Contact Memotec service personnel if
this value displays.
Default Value: nonerodeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.2.1.7 |
cxMcVoxEventPinDisplays the Personal Identification Number (PIN) that is validated
against the local voice station card PIN number table.
Range of Values: 2 to 8 numeric digits, each number from 0 to 9
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.3.2.1.8 |
cxMcVoxEventClrEvtsDetermines whether to clear ALL logging information from the Event
group table.
Options:
no (1)
yes (2)
Default Value: no (1)
Configuration Change: nonerwdeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.2.1.9 |
cxMcVoxStateTableConnections table for outgoing calls.deprecated SEQUENCE OF CxMcVoxStateEntry .1.3.6.1.4.1.495.2.1.1.2.3.3 |
cxMcVoxStateEntryOutgoing call connection state row definition.deprecated CxMcVoxStateEntry .1.3.6.1.4.1.495.2.1.1.2.3.3.1 |
cxMcVoxStateCardNumberDisplays the slot number of the voice I/O card.
You cannot modify this object. It is a display that the software provides.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 4
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.3.1.1 |
cxMcVoxStatePortNumberDisplays the number of the voice I/O port.
You cannot modify this object. It is a display that the software provides.
Options:
CX900: 1 is the only acceptable value. Each I/O card on has 1 port.
CX1000: 1 or 2
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.3.1.2 |
cxMcVoxStateLogIndexDisplays the number of the table row containing objects used for
monitoring the path state.
You cannot modify this object.
Range of Values: 1 to 4294967295
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.3.3.1.3 |
cxMcVoxStatePathIdDisplays the Path ID or Group ID that the user dials to access
the remote telephone or fax machine.
Displays the Path ID or Group ID that the user dials to access the remote
telephone or fax machine.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxPathAdmPathId of the cxMcVox Administrative Path
Group.
Range of Values: 1 to 4 numeric digits
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.3.3.1.4 |
cxMcVoxStateDateAndTimeDisplays the date and time the link associated with the Path/Group ID
changed state (i.e. the call was initiated). The format of the display is
as follows:
Year/Month/Date-Day-Hours:Minutes:Seconds
You cannot modify this object.
Range of Values:
Year: 0-99
Month: 1-12
Date: 1-31 (day of the month)
Day : 0-6 (day of the week, 0 being Sunday)
Hours: 0-23
Minutes: 0-59
Seconds: 0-59
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.3.3.1.5 |
cxMcVoxStateLnkStateDisplays the status of the link to the remote telephone or fax machine.
You cannot modify this object.
Options:
remUnavailable (1): the routing specifies a remote chassis location that
does not exist.
remError (2): all voice ports at the specified remote are inactive and
therefore cannot accept the call. It is possible that the remote ports are
disabled or that the I/O card is not installed.
busy (3): all voice ports at the specified remote are busy and therefore
unavailable to accept the call.
open (4): the call was successfully put through to a voice port at the
remote location.
errActiveChn (5): the end-user has replaced the receiver (on-hook) at the
end of a call and then removed the receiver (off-hook) so quickly that the
connection has not had sufficient time to completely disconnect. The
end-user should wait a few seconds after replacing the receiver before
attempting to place another call.
errPath (6): the Path ID (dialing code) the user entered is not listed in
the routing table. Check that the Path ID and routing are completely
configured.
errLnk (7): there is an error condition on the line between the local and
remote link stations causing the link to be inactive.
fixedLnkDown (8): Memotec use only. Contact Memotec sevice personnel if
this value displays.
fixedLnkUp (9): Memotec use only. Contact Memotec service personnel if
this value displays.
Default Value: nonerodeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.3.3.1.6 |
cxMcVoxStateRmtExtDisplays the Remote Extension or Group ID that the user dials to access
the remote telephone or fax machine.
You cannot modify this object.
Range of Values: 1 to 5 numeric digits
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.3.3.1.7 |
cxMcVoxPathAdmTablePlanned pathID table.deprecated SEQUENCE OF CxMcVoxPathAdmEntry .1.3.6.1.4.1.495.2.1.1.2.4 |
cxMcVoxPathAdmEntryPlanned pathID row definition.deprecated CxMcVoxPathAdmEntry .1.3.6.1.4.1.495.2.1.1.2.4.1 |
cxMcVoxPathAdmIndexDisplays the index number of the Path ID.
You cannot modify this object.
Range of Values: 1 to 300
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.4.1.1 |
cxMcVoxPathAdmRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): Row is deleted from the table immediately, however values are
still in effect until the next reset.
valid (2): Use this value to add a new row to the table, or modify an
existing row.
Default Value: none
Configuration Changed: administrativerwdeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.4.1.2 |
cxMcVoxPathAdmPathIdDetermines the administrative numeric dialing code that the user enters
to access the remote telephone or fax machine.
Note: The length of the ID must match the value you define for the object
cxMcVoxPathAdmPathLng (of this table).
Range of Values: 1 to 4 numeric digits
Default Value: none
Configuration Changed: administrativerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.4.1.3 |
cxMcVoxPathAdmRemStationIdDetermines the administrative ID (name) of the remote voice station.
Note: The remote voice station must exist in the Network Routing table
before its ID can be defined.
Range of Values: a maximum of 12 alphanumeric characters. All characters
must be in capital letters. You can use any combination of letters and
numbers, however you cannot use blank spaces. Use a dash or underscore as
a delimiter.
Default Value: none
Configuration Changed: administrativerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.4.1.4 |
cxMcVoxPathAdmHuntDetermines the port numbers included in the administrative Hunt Group.
A Hunt Group identifies multiple ports on a single remote voice station
(as defined with the object cxMcVoxPathAdmRemStationId of this table). The
Path ID (defined using the object cxMcVoxPathAdmId of this table)
references this Hunt Group during call establishment. Each port in the
Hunt Group is polled until one of the ports accepts the call. A maximum of
32 ports can be in a single hunt group.
Range of Values: 1 to 4294967295
Default Value: 65535
Configuration Changed: administrativerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.4.1.5 |
cxMcVoxPathAdmLngDetermines the length (in digits) of the administrative Path
ID.
Note: If you modify the current operative value to one that is a lower
digit, the current operative Path IDs (using the higher value) will be
lost once the administrative setting is initialized.
Range of Values: 1 to 4
Default Value: 3
Configuration Changed: administrativerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.4.1.6 |
cxMcVoxPathOpeTableActive pathID table.deprecated SEQUENCE OF CxMcVoxPathOpeEntry .1.3.6.1.4.1.495.2.1.1.2.5 |
cxMcVoxPathOpeEntryActive pathID row definition.deprecated CxMcVoxPathOpeEntry .1.3.6.1.4.1.495.2.1.1.2.5.1 |
cxMcVoxPathOpeIndexDisplays the index number of the operational Path ID.
You cannot modify this object.
Range of Values: 1 to 300
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.5.1.1 |
cxMcVoxPathOpePathIdDisplays the operational Path ID.
The Path ID is the numeric dialing code the user enters to gain access to
the remote telephone or fax machine.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxPathAdmPathId of the cxMcVox Administrative
Configuration Group.
Range of Values: 1 to 4 digits
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.5.1.2 |
cxMcVoxPathOpeRemStationIdDisplays the operational ID (name) of the remote voice station.
Note: The remote voice station must exist in the Network Routing table
before its ID can be defined.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxNetAdmRemStationId of the cxMcVox Administrative
Net group
Range of Values: a maximum of 12 alphanumeric characters. All characters
must be in capital letters. You can use any combination of letters and
numbers, however you cannot use blank spaces. Use a dash or underscore as
a delimiter.
Default: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.5.1.3 |
cxMcVoxPathOpeHuntDisplays the port numbers included in the operational Hunt Group.
A Hunt Group identifies multiple ports on a single remote voice station
(as defined with the object cxMcVoxPathAdmRemStationId of this table). The
Path ID (defined using the object cxMcVoxPathAdmId of this table)
references this hunt group during call establishment. Each port in the
Hunt Group is polled until one of the ports accepts the call. A maximum of
8 ports can be in a single hunt group.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxPathAdmHunt of the cxMcVox Administrative Path
Group.
Range of Values: 1 to 4294967295
Default Value: 65535rodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.5.1.4 |
cxMcVoxPathOpeLngDisplays the length (in digits) of the operative Path ID.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxPathAdmPathLng of the cxMcVox Administrative Path
Group.
Range of Values: 1 to 4
Default Value: 3rodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.5.1.5 |
cxMcVoxNetAdmTablePlanned NET entries.deprecated SEQUENCE OF CxMcVoxNetAdmEntry .1.3.6.1.4.1.495.2.1.1.2.6 |
cxMcVoxNetAdmEntryPlanned NET row.deprecated CxMcVoxNetAdmEntry .1.3.6.1.4.1.495.2.1.1.2.6.1 |
cxMcVoxNetAdmIndexDisplays the index number of the administrative network routing entry.
You cannot modify this object.
Range of Values: 1 to 300
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.6.1.1 |
cxMcVoxNetAdmRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): row is flagged; after the next reset the values will be
disabled and the row will be deleted from the table.
valid (2): values are enabled
Default Value: none
Configuration Changed: administrativerwdeprecated Enumeration .1.3.6.1.4.1.495.2.1.1.2.6.1.2 |
cxMcVoxNetAdmRemStationIdDetermines the administrative ID (name) of the remote voice
station.
Range of Values: a maximum of 12 alphanumeric characters. All characters
must be in capital letters. You can use any combination of letters and
numbers, however you cannot use blank spaces. Use a dash or underscore as
a delimiter.
Default: none
Configuration Changed: administrativerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.6.1.3 |
cxMcVoxNetAdmLocalLnkStationDetermines the slot number holding the local CPU board
supporting the GMF software. This value is always '1' if the CPU is in the
CX900 architecture.
Range of Values:
CX900: 1
CX1000: 1 to 16
Default Value: 1
Configuration Changed: administrativerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.6.1.4 |
cxMcVoxNetAdmRouteDetermines the number that identifies the administrative link
entry in the GMF (Gateway Mux Frame Relay).
The network administrator assigns this number in sequential order starting
at 1. You then must establish an internal system route from the GMF route
number to a Frame Relay circuit alias using the objects gmfSRLink and
gmfSRDestCircuitAlias of the GMF System Routing Definition Group.
Range of Values: 1 to 1024
Default Value: 1
Configuration Changed: administrativerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.6.1.5 |
cxMcVoxNetAdmRemVoxStationDetermines the slot number holding the remote CPU board that
supports the voice software. This value is always '1' if the remote CPU is in the CX900
architecture.
Range of Values:
CX900: 1
CX1000: 1 to 16
Default Value: 1
Configuration Changed: administrativerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.6.1.6 |
cxMcVoxNetOpeTableActive net entries table.deprecated SEQUENCE OF CxMcVoxNetOpeEntry .1.3.6.1.4.1.495.2.1.1.2.7 |
cxMcVoxNetOpeEntryActive net entry row definition.deprecated CxMcVoxNetOpeEntry .1.3.6.1.4.1.495.2.1.1.2.7.1 |
cxMcVoxNetOpeIndexDisplays the index number of the operative network routing
entry.
You cannot modify this object
Range of Values: 1 to 300
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.7.1.1 |
cxMcVoxNetOpeRemStationIdDisplays the operative ID (name) of the remote voice station.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxNetAdmOpeRemStationId of the cxMcVox
Administrative Net Group.
Range of Values: a maximum of 12 alphanumeric characters. All characters
must be in capital letters. You can use any combination of letters and
numbers, however you cannot use blank spaces. Use a dash or underscore as
a delimiter.
Default: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.7.1.2 |
cxMcVoxNetOpeLocalLnkStationDisplays the slot number holding the local CPU board supporting
the GMF software. This value is always '1' if the CPU is in the CX900
architecture.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxNetAdmOpeLocalLnkStation of the cxMcVox
Administrative Net Group.
Range of Values:
CX900: 1
CX1000: 1 to 16
Default Value: 1rodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.7.1.3 |
cxMcVoxNetOpeRouteDisplays the number that identifies the operative link entry.
The network administrator assigns this number to identify the route in the
routing table.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxNetAdmOpeRoute of the cxMcVox Administrative Net
Group.
Range of Values: 1 to 1024
Default Value: 1rodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.7.1.4 |
cxMcVoxNetOpeRemVoxStationDisplays the slot number holding the remote CPU board that
supports the voice software. This value is always '1' if the remote CPU is
in the CX900 architecture.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxNetAdmRemVoxStation of the cxMcVox Administrative
Net Group.
Range of Values:
CX900: 1
CX1000: 1 to 16
Default Value: 1rodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.7.1.5 |
cxMcVoxDriverAdm OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.8 |
cxMcVoxEmAdmTableVoice station planned E&M Table. SEQUENCE OF CxMcVoxEmAdmEntry .1.3.6.1.4.1.495.2.1.1.2.8.1 |
cxMcVoxEmAdmEntryVoice station planned E&M row definition. CxMcVoxEmAdmEntry .1.3.6.1.4.1.495.2.1.1.2.8.1.1 |
cxMcVoxEmAdmCardUsedDisplays the slot number of the voice I/O card.
You cannot modify this object.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 8
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.1.1.1 |
cxMcVoxEmAdmPortUsedDisplays the number of the voice port.
You cannot modify this object. It is a display that the software provides.
Options:
CX900: 1 is the only acceptable value. Each I/O card only has 1 port.
CX1000: up to 15 for the DI600
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.1.1.2 |
cxMcVoxEmAdmPortStatusDetermines the functional status of the administrative E&M port.
Options:
disable (1): port is not functional
enable (2): port is up and active
Default Value: disable (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.3 |
cxMcVoxEmAdmVocoderDetermines the transmission speed (in bits per second) of the compressed
voice stream on the administrative E&M port. Defining the speed also sets
the ACELP voice compression ratio.
Options:
bps5800 (1): compresses at a higher rate and uses slightly less bandwidth.
bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a
higher quality voice sound at the receiving end.
opt3 (3): ADPCM 40.
opt4 (4): ADPCM 32.
opt5 (5): ADPCM 24.
opt6 (6): ADPCM 16.
opt7 (7): Memotec use only.
opt8 (8): Memotec use only.
Default Value: bps8000
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.4 |
cxMcVoxEmAdmFaxBwDetermines the speed (in bits per second) of the FAX channel on the
administrative E&M port. This value also determines the bandwidth required
to pass FAX traffic through the voice software. This value can be set to
match the speed of your FAX machine or it can be lowered to reduce
bandwidth allocation.
Options:
bps2400 (1)
bps4800 (2)
bps7200 (3)
bps9600 (4)
Default Value: bps7200 (3)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.5 |
cxMcVoxEmAdmAutoCnxObsolete.rwobsolete Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.6 |
cxMcVoxEmAdmPathIdPath IDs no longer exist in the new Voice Routing (VR) scheme.
Determines the Path ID used for auto-connection on the administrative E&M
port.
The Path ID is a numeric dialing code the user enters to gain access to
the remote telephone or fax machine.
Note: The number of digits in the Path ID must match the value of the
object cxMcVoxPathAdmPathLng of the cxMcVox Administrative Path Group.
Range of Values: 1 to 4 numeric digits
Default Value: none
Configuration Changed: administrativerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.1.1.7 |
cxMcVoxEmAdmTxGainDetermines the value defining the sound intensity (loudness) of voice
transmissions on the administrative E&M port. The transmission gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Transmission gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the local listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.1.1.8 |
cxMcVoxEmAdmRxGainDetermines the value defining the sound intensity (loudness) of voice
reception on the administrative E&M port. The reception gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Reception gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the remote listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.1.1.9 |
cxMcVoxEmAdmEchoCancelDetermines the state of echo cancellation on the administrative E&M port.
When set to 'enable', at both the local and remote ends, echo cancellation
stops echoes from the remote that are heard through the receiver at the
local end.
Options:
disable (1)
enable (2)
Default Value: enable (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.10 |
cxMcVoxEmAdmTypeDetermines the type of E&M interface on the administrative E&M port. Each
of the five interface types has a unique signal-to-wire pattern. Make sure
that you select the interface type that matches your PBX.
Options:
type-1 (1)
type-2 (2)
type-3 (3)
type-4 (4)
type-5 (5)
Default Value: type-2 (2)
Configuration Changed: administrative
NOTE: This object is READ-ONLY for the CX800.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.11 |
cxMcVoxEmAdmModeDetermines the signalling mode for the administrative E&M port. The
signalling mode refers to the wires of the physical connection and how
they are connected. The mode you select must match the type the PBX punch
block uses or the port will not be able to communicate with it.
Options:
normal (1)
reverse (2)
Default Value: normal
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.12 |
cxMcVoxEmAdmDialTypeDetermines the dialing method of the administrative E&M port. The dialing
method refers to the sound that occurs when the user enters each digit of
the dialing code.
Options:
dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to
identify the code the user dials. Tones are generated at a level of -7
plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3
dBm for the higher frequency group. The power level of the higher
frequency tone is intentionally increased to compensate for the higher
line loss.
pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone
frequency (2280Hz) to generate the codes the user enters. Tones are
generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number
of pulses during one second indicates the code the user dials. With the
E&M interface, the voice station generates and detects pulses.
mfR1 (3): R1 signaling protocol MultiFrequency (MF) uses bursts of
frequency pairs to identify the code the user dials. Tones are generated
at a level of -7 dBm0 +- 1 dB (CCITT Recommendation Q.322). The difference
in transmission level between the two frequencies comprises a signal that
does not exceed 0.5 dB.
mfR2 (4): R2 signaling protocol MultiFrequency (MF) uses bursts of
frequency pairs to identify the code the user dials. Tones are generated
at a level of -8 dBm0 +- 1 dB (CCITT Recommendation Q.454). The difference
in transmission level between the two frequencies comprises a signal that
does not exceed 1 dB.
Default Value: dtmf (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.13 |
cxMcVoxEmAdmSignalTypeDetermines the type of signalling on the administrative E&M port. The
signalling type refers to the line seizure technique
Options:
normal (1)
delay (2)
wink (3)
ac15 (4)
openChn (5)
R2 (6)
MFCR2 (7)
isdn (8)
Note: If you select 'ac15' you must define the object cxMcVoxEmAdmDialType
of this table.
Default Value: normal
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.14 |
cxMcVoxEmAdmAc15TypeDetermines the type of AC15 signals the administrative E&M port uses to
seize the line for transmission.
This object is only relevant to E&M ports using the AC15 signalling type
(as defined using the object cxMcVoxEmAdmSignalType of this table)
Options:
normal (1)
delay (2)
Default Value: normal
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.15 |
cxMcVoxEmAdmAc15TimeOnDetermines the length of time, in milliseconds, the AC15 pulse remains
on.
This object is only relevant to E&M ports using the AC15 signalling type
(as defined using the object cxMcVoxEmAdmSignalType of this table)
Range of Values: 0 to 60000
Default Value: 60
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.1.1.16 |
cxMcVoxEmAdmAc15TimeOffDetermines the length of time, in milliseconds, the AC15 pulse remains
off.
This object is only relevant to E&M ports using the AC15 signalling type
(as defined using the object cxMcVoxEmAdmSignalType of this table)
Range of Values: 0 to 60000
Default Value: 40
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.1.1.17 |
cxMcVoxEmAdmCnctTypeDetermines the method the administrative E&M port uses to make
connections.
Options:
switched (1): the port connects each call according to the dialing code
the user enters.
auto-connect (2): calls passing through this port always terminate at the
same remote destination. The port connects to the remote as soon as the
local receiver enters the off-hook state. Any remote can connect to a port
with an auto-connect configuration but when the local user initiates the
call it always goes to the same remote.
fixed (3): calls passing through this port always terminate at the same
remote destination. The port connects to the remote as soon as the local
receiver enters the off-hook state. Only the local and remote destinations
of the connection can use this port. No other remote location can gain
access to this port.
Default Value: switched (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.18 |
cxMcVoxEmAdmRingTypeDetermines the ring type of the administrative E&M port. The ring types
provide different ring timing to match the different ring cycles in
networks.
Options:
north-american (1)
international (2)
Default Value: north-american (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.19 |
cxMcVoxEmAdmRmtExtDetermines the Remote Extension or Group Id used for auto-connection on
the E&M port.
The Remote Extension is a numeric dialing code that the user enters to
gain access to the remote telephone or fax machine.
Auto-connection is the connection method that this port uses. A particular
Remote Extension or Group Id has been assigned to the port so that no
dialing is required.
Note: The number of digits in the Remote Extension is determined by the
object cxMcVoxNetNbDigits of the cxMcVox Global Parameters Group.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.1.1.20 |
cxMcVoxEmAdmRmtIdDetermines the ID (name) for the remote voice station.
Note:
This object must be defined in order to obtain a successful voice
connection via the fixed connection method.
With the fixed connection method, a particular Remote Extension or Group
Id is assigned to the port so that no dialing is required. The call to the
remote is established as soon as the connection is configured.
Range of Values: A maximum of 10 alphanumeric characters in upper-case
only. You can use any combination of letters and numbers; however you
cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.1.1.21 |
cxMcVoxEmAdmTranspModeDetermines the whether to use the Transparent mode on the administrative
port. In the transparent mode, the local port will answer only after
the called party has answered to the party to which the call is finally
destinated.
The Transparent mode is incompatible with Switched type of
connection and is automatically disabled when Switched mode is selected
(only applies to autoconnect and fixed connections).
The Local mode lets the local port answer right away to a seizure.
Options:
emulate (1): Emulation mode is on
transparent (2): Transparent mode on
local (3): Local mode on
Default Value: emulate (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.22 |
cxMcVoxEmAdmFaxEnableDetermines the state of the Memotec's FAX relay software on the administrative
E&M port. When set to 'enable', at both ends, the Memotec's FAX relay
software will be used to transfer FAX messages taking into account the
'cxMcVoxEmAdmFaxBw' object. Otherwise, when set to 'disable', at both ends,
no FAX relay support is provided, and the FAX goes through the voice coder
if supported.
Options:
disable (1)
enable (2)
Default Value: enable (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.23 |
cxMcVoxEmAdmBroadcastCetermines the state of the voice broadcast feature. When set to none, no
broadcast is used. When set to master, ...
Options:
none (1)
master (2)
slave (3)
Default Value: none (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.24 |
cxMcVoxEmAdmImpedanceDisplays the input line impedance of the operative E&M interface.
The value of this object can be modified in operational mode.
Options:
i600-ohms (1)
i900-ohms (2)
att (3)
aus (4)
Default Value: i600-ohms (1)
NOTE: This object is READ-ONLY for the CX800.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.25 |
cxMcVoxEmAdmVoiceConnectionIndicates which voice path is provided by the
E&M interface.
Options:
two-wires (1)
four-wires (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.1.1.26 |
cxMcVoxFxsAdmTable SEQUENCE OF CxMcVoxFxsAdmEntry .1.3.6.1.4.1.495.2.1.1.2.8.2 |
cxMcVoxFxsAdmEntry CxMcVoxFxsAdmEntry .1.3.6.1.4.1.495.2.1.1.2.8.2.1 |
cxMcVoxFxsAdmCardUsedDisplays the slot number of the voice I/O card.
You cannot modify this object.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 8
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.2.1.1 |
cxMcVoxFxsAdmPortUsedDisplays the number of the voice port.
You cannot modify this object.
Options:
CX900: 1 is the only acceptable value. Each I/O card only has 1 port
CX1000: 1 or 2
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.2.1.2 |
cxMcVoxFxsAdmPortStatusDetermines the functional status of the administrative port.
Options:
disable (1): port is not functional
enable (2): port is up and active
Default Value: disable (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.3 |
cxMcVoxFxsAdmVocoderDetermines the transmission speed (in bits per second) of the compressed
voice stream on the administrative FXS port. Defining the speed also sets
the ACELP voice compression ratio.
Options:
bps5800 (1): compresses at a higher rate and uses slightly less bandwidth.
bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a
higher quality voice sound at the receiving end.
opt3 (3): ADPCM 40.
opt4 (4): ADPCM 32.
opt5 (5): ADPCM 24.
opt6 (6): ADPCM 16.
opt7 (7): Memotec use only.
opt8 (8): Memotec use only.
Default Value: bps8000 (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.4 |
cxMcVoxFxsAdmFaxBwDetermines the speed (in bits per second) of the FAX channel on the
administrative FXS port. This value also determines the bandwidth required
to pass FAX traffic through the voice software.This value can be set to
match the speed of your FAX machine or it can be lowered to reduce
bandwidth allocation.
Options:
bps2400 (1)
bps4800 (2)
bps7200 (3)
bps9600 (4)
Default Value: bps7200 (3)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.5 |
cxMcVoxFxsAdmAutoCnxobsoleterwobsolete Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.6 |
cxMcVoxFxsAdmPathIdPath IDs no longer exist with the new Voice Routing (VR) scheme.
The Path ID is a numeric dialing code the user enters to gain access to
the remote telephone or fax machine.
Note: The number of digits in the Path ID must match the value of the
object cxMcVoxPathAdmPathLng of the cxMcVox Administrative Path Group
Range of Values: 1 to 4 digits
Default Value: nonerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.2.1.7 |
cxMcVoxFxsAdmTxGainDetermines the value defining the sound intensity (loudness) of voice
transmissions on the administrative FXS port. The transmission gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Transmission gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the local listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.2.1.8 |
cxMcVoxFxsAdmRxGainDetermines the value defining the sound intensity (loudness) of voice
reception on the administrative FXS port. The reception gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Reception gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the remote listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.2.1.9 |
cxMcVoxFxsAdmEchoCancelDetermines the state of echo cancellation on the administrative FXS port.
When set to 'enable' at both the local and remote ends, echo cancellation
stops echoes from the remote that are heard through the receiver at the
local end.
Options:
disable (1)
enable (2)
Default Value: enable (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.10 |
cxMcVoxFxsAdmSignalingDetermines the type of signalling the administrative FXS port uses to
seize the line.
Options:
ground-start (1)
loop-start (2)
did (3)
Default Value: loop-start (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.11 |
cxMcVoxFxsAdmTimeOnobsoleterwobsolete INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.2.1.12 |
cxMcVoxFxsAdmTimeOffobsoleterwobsolete INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.2.1.13 |
cxMcVoxFxsAdmCnctTypeDetermines the method the administrative FXS port uses to make
connections.
Options:
switched (1): the port connects each call according to the dialing code
the user enters.
auto-connect (2): calls passing through this port always terminate at the
same remote destination. The port connects to the remote as soon as the
local receiver enters the off-hook state. Any remote can connect to a port
with an auto-connect configuration but when the local user initiates the
call it always goes to the same remote.
fixed (3): calls passing through this port always terminate at the same
remote destination. The port connects to the remote as soon as the local
receiver enters the off-hook state. Only the local and remote destinations
of the connection can use this port. No other remote location can gain
access to this port.
Default Value: switched (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.14 |
cxMcVoxFxsAdmRingTypeDetermines the ring type of the administrative FXS port. The ring types
provide different ring timing to match the different ring cycles in
networks.
Options:
north-american (1)
international (2)
Default Value: north-american (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.15 |
cxMcVoxFxsAdmImpedanceDetermines the input line impedance of the administrative FXS
port.
Options:
i600-ohms (1)
i900-ohms (2)
att (3)
aus (4)
Default Value: i600-ohms (1)
Configuration Changed: administrative
NOTE: The option aus(4) is added only starting at version 11.
NOTE: This object is READ-ONLY for the CX800.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.16 |
cxMcVoxFxsAdmDialTypeDetermines the dialing method of the administrative FXS port. The dialing
method refers to the sound that occurs when the user enters each digit of
the dialing code.
Options:
dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to
identify the code the user dials. Tones are generated at a level of -7
plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3
dBm for the higher frequency group. The power level of the higher
frequency tone is intentionally increased to compensate for the higher
line loss.
pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone
frequency (2280Hz) to generate the codes the user enters. Tones are
generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number
of pulses during one second indicates the code the user dials. With the
E&M interface, the voice station generates and detects pulses.
Default Value: dtmf (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.17 |
cxMcVoxFxsAdmDidSignalTypeNote: This object only applies to those ports with the object
cxMcVoxFxsAdmSignaling set to 'did'.
Determines the type of signaling on the administrative FXS port. The
signaling type refers to the line seizure technique.
Options:
normal (1)
delay (2)
wink (3)
Default Value: normal (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.18 |
cxMcVoxFxsAdmRmtExtDetermines the Remote Extension or Group Id used for auto-connection on
the FXS port.
The Remote Extension is a numeric dialing code that the user enters to
access the remote telephone or fax machine.
Auto-connection is the connection method that this port uses. A particular
Remote Extension or Group Id has been assigned to the port so that no
dialing is required.
Note: The number of digits in the Remote Extension is determined by the
object cxMcVoxNetNbDigits of the cxMcVox Global Parameters Group.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.2.1.19 |
cxMcVoxFxsAdmRmtIdDetermines the ID (name) for the remote voice station.
Note:
This object must be defined in order to obtain a successful voice
connection with fixed type connection.
With the fixed connection method, a particular Remote Extension or Group
Id is assigned to the port so that no dialing is required. The call to the
remote is established as soon as the connection is configured.
Range of Values: a maximum of 10 alphanumeric characters in upper-case
only. You can use any combination of letters and numbers; however you
cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.2.1.20 |
cxMcVoxFxsAdmTranspModeDetermines the whether to use the Transparent mode on the administrative
port. In the transparent mode, the local port will answer only after
the called party has answered to the party to which the call is finally
destinated.
The Transparent mode is incompatible with Switched type of
connection and is automatically disabled when Switched mode is selected
(only applies to autoconnect and fixed connections).
The Local mode lets the local port answer right away to a seizure.
Options:
emulate (1): Emulation mode is on
transparent (2): Transparent mode on
local (3): Local mode on
Default Value: emulate (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.21 |
cxMcVoxFxsAdmFaxEnableDetermines the state of the Memotec's FAX relay software on the administrative
E&M port. When set to 'enable', at both ends, the Memotec's FAX relay
software will be used to transfer FAX messages taking into account the
'cxMcVoxFxsAdmFaxBw' object. Otherwise, when set to 'disable', at both ends,
no FAX relay support is provided, and the FAX goes through the voice coder
if supported.
Options:
disable (1)
enable (2)
Default Value: enable (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.22 |
cxMcVoxFxsAdmBroadcastCetermines the state of the voice broadcast feature. When set to none, no
broadcast is used. When set to master, ...
Options:
none (1)
master (2)
slave (3)
Default Value: none (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.2.1.23 |
cxMcVoxFxoAdmTablecx Voice Station Administrative FXO Table. SEQUENCE OF CxMcVoxFxoAdmEntry .1.3.6.1.4.1.495.2.1.1.2.8.3 |
cxMcVoxFxoAdmEntrycx Voice Station Administrative FXO Entry CxMcVoxFxoAdmEntry .1.3.6.1.4.1.495.2.1.1.2.8.3.1 |
cxMcVoxFxoAdmCardUsedDisplays the slot number of the voice I/O card.
You cannot modify this object. It is a display that the software provides.
Range of Values
CX900: 1 to 6
CX1000: 1 to 8
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.3.1.1 |
cxMcVoxFxoAdmPortUsedDisplays the number of the voice I/O port.
You cannot modify this object. It is a display that the software provides.
Options:
CX900: 1 is the only acceptable value. Each I/O card only has 1 port.
CX1000: up to 15 for the DI600
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.3.1.2 |
cxMcVoxFxoAdmPortStatusDetermines the functional status of the administrative port.
Options:
disable (1): port is not functional
enable (2): port is up and active
Default Value: disable (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.3 |
cxMcVoxFxoAdmVocoderDetermines the transmission speed (in bits per second) of the compressed
voice stream on the administrative FXO port. Defining the speed also sets
the ACELP voice compression ratio.
Options:
bps5800 (1): compresses at a higher rate and uses slightly less bandwidth.
bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a
higher quality voice sound at the receiving end.
opt3 (3): ADPCM 40.
opt4 (4): ADPCM 32.
opt5 (5): ADPCM 24.
opt6 (6): ADPCM 16.
opt7 (7): Memotec use only.
opt8 (8): Memotec use only.
Default Value: bps8000 (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.4 |
cxMcVoxFxoAdmFaxBwDetermines the speed (in bits per second) of the FAX channel on the
administrative FXO port. This value also determines the bandwidth required
to pass FAX traffic through the voice software. This value can be set to
match the speed of your FAX machine or it can be lowered to reduce
bandwidth allocation.
Options:
bps2400 (1)
bps4800 (2)
bps7200 (3)
bps9600 (4)
Default Value: bps7200 (3)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.5 |
cxMcVoxFxoAdmAutoCnxobsoleterwobsolete Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.6 |
cxMcVoxFxoAdmPathIdPath IDs no longer exist with the new Voice Routing (VR)
scheme.
The Path ID is a numeric dialing code the user enters to gain access to
the remote telephone or fax machine.
Note: The number of digits in the Path ID must match the value of the
object cxMcVoxPathAdmPathLng of the cxMcVox Administrative Path Group.
Range of Values: 1 to 4 numeric digits
Default Value: none
Configuration Changed: administrativerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.3.1.7 |
cxMcVoxFxoAdmTxGainDetermines the value defining the sound intensity (loudness) of voice
transmission on the administrative FXO port. The transmission gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Transmission gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the local listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.3.1.8 |
cxMcVoxFxoAdmRxGainDetermines the value defining the sound intensity (loudness) of voice
reception on the administrative FXO port. The reception gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Reception gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the remote listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.8.3.1.9 |
cxMcVoxFxoAdmEchoCancelDetermines the state of echo cancellation on the administrative FXO port.
When set to 'enable' at both the local and remote ends, echo cancellation
stops echoes from the remote that are heard through the receiver at the
local end.
Options:
disable (1)
enable (2)
Default Value: enable (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.10 |
cxMcVoxFxoAdmSignalingDetermines the type of signalling the administrative FXO port uses to
seize the line.
Options:
ground-start (1)
loop-start (2)
did (3)
Default Value: loop-start (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.11 |
cxMcVoxFxoAdmCnctTypeDetermines the method the administrative FXO port uses to make
connections.
Options:
switched (1): the port connects each call according to the dialing code
the user enters.
auto-connect (2): calls passing through this port always terminate at the
same remote destination. The port connects to the remote as soon as the
local receiver enters the off-hook state. Any remote can connect to a port
with an auto-connect configuration but when the local user initiates the
call it always goes to the same remote.
fixed (3): calls passing through this port always terminate at the same
remote destination. The port connects to the remote as soon as the local
receiver enters the off-hook state. Only the local and remote destinations
of the connection can use this port. No other remote location can gain
access to this port.
Default Value: switched (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.12 |
cxMcVoxFxoAdmRingTypeDetermines the ring type of the administrative FXO port. The ring types
provide different ring timing to match the different ring cycles in
networks.
Options:
north-american (1)
international (2)
Default Value: north-american (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.13 |
cxMcVoxFxoAdmImpedanceDetermines the input line impedance of the administrative FXO
interface.
Options:
i600-ohms (1)
i900-ohms (2)
att (3)
aus (4)
Default Value: i600-ohms (1)
Configuration Changed: administrative
NOTE: The option aus(4) is added only starting at version 11.
NOTE: This object is READ-ONLY for the CX800.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.14 |
cxMcVoxFxoAdmDialTypeDetermines the dialing method of the administrative FXO port. The dialing
method refers to the sound that occurs when the user enters each digit of
the dialing code.
Options:
dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to
identify the code the user dials. Tones are generated at a level of -7
plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3
dBm for the higher frequency group. The power level of the higher
frequency tone is intentionally increased to compensate for the higher
line loss.
pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone
frequency (2280Hz) to generate the codes the user enters. Tones are
generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number
of pulses during one second indicates the code the user dials. With the
E&M interface, the voice station generates and detects pulses.
Default Value: dtmf 1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.15 |
cxMcVoxFxoAdmDidSignalTypeNote: This object only applies to those ports with the object
cxMcVoxFxoAdmSignaling set to 'did'.
Determines the type of signaling on the administrative FXO port. The
signaling type refers to the line seizure technique.
Options:
normal (1)
delay (2)
wink (3)
Default Value: normal (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.16 |
cxMcVoxFxoAdmRmtExtDetermines the Remote Extension or Group Id used for auto-connection on
the FXO port.
The Remote Extension is a numeric dialing code that the user enters to
gain access to the remote telephone or fax machine.
Auto-connection is the connection method that this port uses. A particular
Remote Extension or Group Id has been assigned to the port so that no
dialing is required.
Note: The number of digits in the Remote Extension is determined by the
object cxMcVoxNetNbDigits of the cxMcVox Global Parameters Group.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.3.1.17 |
cxMcVoxFxoAdmRmtIdDetermines the ID (name) for the remote voice station.
Note:
This object must be defined in order to obtain a successful voice
connection with fixed type connection.
With the fixed connection method, a particular Remote Extension or Group
Id is assigned to the port so that no dialing is required. The call to the
remote is established as soon as the connection is configured.
Range of Values: a maximum of 10 alphanumeric characters in upper-case
only. You can use any combination of letters and numbers; however you
cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.8.3.1.18 |
cxMcVoxFxoAdmTranspModeDetermines the whether to use the Transparent mode on the administrative
port. In the transparent mode, the local port will answer only after
the called party has answered to the party to which the call is finally
destinated.
The Transparent mode is incompatible with Switched type of
connection and is automatically disabled when Switched mode is selected
(only applies to autoconnect and fixed connections).
The Local mode lets the local port answer right away to a seizure.
Options:
emulate (1): Emulation mode is on
transparent (2): Transparent mode on
local (3): Local mode on
Default Value: emulate (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.19 |
cxMcVoxFxoAdmFaxEnableDetermines the state of the Memotec's FAX relay software on the administrative
E&M port. When set to 'enable', at both ends, the Memotec's FAX relay
software will be used to transfer FAX messages taking into account the
'cxMcVoxFxoAdmFaxBw' object. Otherwise, when set to 'disable', at both ends,
no FAX relay support is provided, and the FAX goes through the voice coder
if supported.
Options:
disable (1)
enable (2)
Default Value: enable (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.20 |
cxMcVoxFxoAdmBroadcastCetermines the state of the voice broadcast feature. When set to none, no
broadcast is used. When set to master, ...
Options:
none (1)
master (2)
slave (3)
Default Value: none (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.8.3.1.21 |
cxMcVoxDriverOpe OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.9 |
cxMcVoxEmOpeTable SEQUENCE OF CxMcVoxEmOpeEntry .1.3.6.1.4.1.495.2.1.1.2.9.1 |
cxMcVoxEmOpeEntry CxMcVoxEmOpeEntry .1.3.6.1.4.1.495.2.1.1.2.9.1.1 |
cxMcVoxEmOpeCardUsedDisplays the slot number of the voice I/O card.
You cannot modify this object.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 8
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.1.1.1 |
cxMcVoxEmOpePortUsedDisplays the number of the voice I/O port.
You cannot modify this object.
Options:
CX900: 1 is the only acceptable value. Each I/O card has only 1 port.
CX1000: up to 15 for the DI600
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.1.1.2 |
cxMcVoxEmOpePortStatusDisplays the functional status of the operative port.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmportStatus of the cxMcVox Administrative
Driver Group.
Options:
disable (1): port is not functional
enable (2): port is up and active
no-voice-io (3): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-1 (31): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-2 (32): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-3 (33): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-4 (34): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-1 (41): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-2 (42): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-3 (43): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-4 (44): Memotec use only. Contact Memotec service personnel if
this value displays.
Default Value: disable (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.3 |
cxMcVoxEmOpeVocoderDisplays the transmission speed (in bits per second) of the compressed
voice stream on the operative E&M port. Defining the speed also sets the
ACELP voice compression ratio.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmVocoder of the cxMcVox Administrative Driver
Group.
Options:
bps5800 (1): compresses at a higher rate and uses slightly less bandwidth.
bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a
higher quality voice sound at the receiving end.
opt3 (3): ADPCM 40.
opt4 (4): ADPCM 32.
opt5 (5): ADPCM 24.
opt6 (6): ADPCM 16.
opt7 (7): Memotec use only.
opt8 (8): Memotec use only.
Default Value: bps8000ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.4 |
cxMcVoxEmOpeFaxBwDetermines the speed (in bits per second) of the FAX channel on the
operative E&M port. This value also determines the bandwidth required to
pass FAX traffic through the voice software. This value can be set to
match the speed of your FAX machine or it can be lowered to reduce
bandwidth allocation.
Options:
bps2400 (1)
bps4800 (2)
bps7200 (3)
bps9600 (4)
Default Value: bps7200 (3)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.5 |
cxMcVoxEmOpeAutoCnxobsoleteroobsolete Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.6 |
cxMcVoxEmOpePathIdPath IDs no longer exist in the new Voice Routing (VR) scheme.
The Path ID is a numeric dialing code the user enters to gain access to
the remote telephone or fax machine.
Note: The number of digits in the Path ID must match the value of the
object cxMcVoxPathOpePathLng of the cxMcVox Operative Path Group.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmPathId of the cxMcVox Administrative Driver
Group.
Range of Values: 1 to 4 numeric digits
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.1.1.7 |
cxMcVoxEmOpeTxGainDetermines the value defining the sound intensity (loudness) of voice
transmissions on the operative E&M port. The transmission gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Transmission gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the local listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.1.1.8 |
cxMcVoxEmOpeRxGainDetermines the value defining the sound intensity (loudness) of voice
reception on the operative E&M port. The reception gain can be modified in
the administrative configuration or be fine-tuned dynamically.
Note: Reception gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the remote listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.1.1.9 |
cxMcVoxEmOpeEchoCancelDisplays the state of echo cancellation on the operative E&M port. When
set to 'enable' at both the local and remote ends, echo cancellation stops
echoes from the remote that are heard through the receiver at the local
end.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmEchoCancel of the cxMcVox Administrative
Driver Group.
Options:
disable (1)
enable (2)
Default Value: enable (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.10 |
cxMcVoxEmOpeTypeDisplays the type of E&M interface of the operative E&M port. Each of the
five interface types has a unique signal-to-wire pattern. Be sure to
select the interface type that matches your PBX.
You cannot modify this object. If you want to change thevalue you must
modify the object cxMcVoxEmAdmType of the cxMcVox Administrative Driver
Group.
Options:
type-1 (1)
type-2 (2)
type-3 (3)
type-4 (4)
type-5 (5)
Default Value: type-2 (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.11 |
cxMcVoxEmOpeModeDisplays the signalling mode for the operative E&M port. The signalling
mode refers to the wires of the physical connection and how they are
connected. The mode you select must match the type the PBX punch block
uses or the port will not be able to communicate with it.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmMode of the cxMcVox Administrative Driver
Group.
Options:
normal (1)
reverse (2)
Default Value: normal (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.12 |
cxMcVoxEmOpeDialTypeDisplays the dialing method of the operative E&M port. The dialing method
refers to the sound that occurs when the user enters each digit of the
dialing code.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmDialType of the cxMcVox Administrative
Driver Group
Options:
dtmf (1): Dual Tone MultiFrequency uses bursts of frequency pairs to
identify the code the user dials. Tones are generated at a level of -7
plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3
dBm for the higher frequency group. The power level of the higher
frequency tone is intentionally increased to compensate for the higher
line loss.
pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone
frequency (2280Hz) to generate the codes the user enters. Tones are
generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number
of pulses during one second indicates the code the user dials. With the
E&M interface, the voice station generates and detects pulses.
mfR1 (3): R1 signaling protocol MultiFrequency (MF) uses bursts of
frequency pairs to identify the code the user dials. Tones are generated
at a level of -7 dBm0 +- 1 dB (CCITT Recommendation Q.322). The difference
in transmission level between the two frequencies comprises a signal that
does not exceed 0.5 dB.
mfR2 (4): R2 signaling protocol MultiFrequency (MF) uses bursts of
frequency pairs to identify the code the user dials. Tones are generated
at a level of -8 dBm0 +- 1 dB (CCITT Recommendation Q.454). The difference
in transmission level between the two frequencies comprises a signal that
does not exceed 1 dB.
Default Value: dtmf (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.13 |
cxMcVoxEmOpeSignalTypeDisplays the type of signalling the operative E&M port uses to seize the
line.
You cannot modify this object. If you want to change the value you must
modify thee object cxMcVoxEmAdmSignalType of the cxMcVox Administrative
Driver Group.
Options:
normal (1)
delay (2)
wink (3)
ac15 (4)
openChn (5)
R2 (6)
MFCR2 (7)
isdn (8)
Default Value: normal (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.14 |
cxMcVoxEmOpeAc15TypeDisplays the type of AC15 signals the operative E&M port uses to seize
the line for transmission.
This object is only relevant to E&M ports using the AC15 signalling type
(as defined using the object cxMcVoxEmAdmSignalType of the cxMcVox
Administrative Driver Group).
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmAcType of the cxMcVox Administrative Driver
Group.
Options:
normal (1)
delay (2)
Default Value: normalro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.15 |
cxMcVoxEmOpeAc15TimeOnDetermines the length of time, in milliseconds, the AC15 pulse remains
on.
This object is only relevant to E&M ports using the AC15 signalling type
(as defined using the object cxMcVoxEmOpeSignalType of this table).
Range of Values: 0 to 60000
Default Value: 60
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.1.1.16 |
cxMcVoxEmOpeAc15TimeOffDetermines the length of time, in milliseconds, the AC15 pulse remains
off.
This object is only relevant to E&M ports using the AC15 signalling type
(as defined using the object cxMcVoxEmOpeSignalType of this table).
Range of Values: 0 to 60000
Default Value: 40
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.1.1.17 |
cxMcVoxEmOpeCnctTypeDisplays the method the operative E&M port uses to make connections.
This object is only relevant to E&M ports using the AC15 signalling type
(as defined using the object cxMcVoxEmOpeSignalType of this table).
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmCnctType of the cxMcVox Administrative
Driver Group.
Options:
switched (1): the port connects each call according to the dialing code
the user enters.
auto-connect (2): calls passing through this port always terminate at the
same remote destination. The port connects to the remote as soon as the
local receiver enters the off-hook state. Any remote can connect to a port
with an auto-connect configuration but when the local user initiates the
call it always goes to the same remote.
fixed (3): calls passing through this port always terminate at the same
remote destination. The port connects to the remote as soon as the local
receiver enters the off-hook state. Only the local and remote destinations
of the connection can use this port. No other remote location can gain
access to this port.
Default Value: switched (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.18 |
cxMcVoxEmOpeRingTypeDisplays the ring type of the operative E&M port. The ring types provide
different ring timing to match the different ring cycles in networks.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmRingType of the cxMcVox Administrative
Driver Group.
Options:
north-american (1)
international (2)
Default Value: north-american (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.19 |
cxMcVoxEmOpeRmtExtDetermines the Remote Extension or Group Id used for auto-connection on
the E&M port.
The Remote Extension is a numeric dialing code that the user enters to
access to the remote telephone or fax machine.
Auto-connection is the connection method that this port uses. A particular
Remote Extension or Group Id has been assigned to the port so that no
dialing is required.
Note: The number of digits in the Remote Extension is determined by the
object cxMcVoxNetNbDigits of the cxMcVox Global Parameters Group.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: operativero DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.1.1.20 |
cxMcVoxEmOpeRmtIdDisplays the ID (name) for the remote voice station.
Note: This object must be defined in order to obtain a successful voice
connection via the fixed connection method.
You cannot modify this object. If you want to change the ID you must
modify the object cxMcVoxEmAdmRmtId (of this table).
With the fixed connection method, a particular Remote Extension or Group
Id is assigned to the port so that no dialing is required. The call to the
remote is established as soon as the connection is configured.
Range of Values: a maximum of 10 alphanumeric characters in upper-case
only. You can use any combination of letters and numbers; however you
cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.1.1.21 |
cxMcVoxEmOpeTranspModeDetermines the whether to use the Transparent mode on the administrative
port. In the transparent mode, the local port will answer only after
the called party has answered to the party to which the call is finally
destinated.
The Transparent mode is incompatible with Switched type of
connection and is automatically disabled when Switched mode is selected
(only applies to autoconnect and fixed connections).
The Local mode lets the local port answer right away to a seizure.
Options:
emulate (1): Emulation mode is on
transparent (2): Transparent mode on
local (3): Local mode on
Default Value: emulate (1)
Configuration Changed: operationalro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.22 |
cxMcVoxEmOpeFaxEnableDisplays the state of the FAX on the operative E&M port. When
set to 'enable' at both the local and remote ends, the FAX will be
enabled.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmFaxEnable of the cxMcVox Administrative
Driver Group.
Options:
disable (1)
enable (2)
Default Value: enable (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.23 |
cxMcVoxEmOpeBroadcastCetermines the state of the voice broadcast feature. When set to none, no
broadcast is used. When set to master, ...
Options:
none (1)
master (2)
slave (3)
Default Value: none (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.24 |
cxMcVoxEmOpeImpedanceDisplays the input line impedance of the operative E&M interface.
The value of this object can be modified in operational mode.
Options:
i600-ohms (1)
i900-ohms (2)
att (3)
aus (4)
Default Value: i600-ohms (1)
NOTE: This object is READ-ONLY for the CX800.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.25 |
cxMcVoxEmOpeVoiceConnectionIndicates which voice path is provided by the
E&M interface.
Options:
two-wires (1)
four-wires (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.1.1.26 |
cxMcVoxFxsOpeTablecx Voice Station active FXS Table. SEQUENCE OF CxMcVoxFxsOpeEntry .1.3.6.1.4.1.495.2.1.1.2.9.2 |
cxMcVoxFxsOpeEntrycx Voice Station active FXS Entry CxMcVoxFxsOpeEntry .1.3.6.1.4.1.495.2.1.1.2.9.2.1 |
cxMcVoxFxsOpeCardUsedDisplays the slot number of the voice I/O card.
You cannot modify this object.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 8
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.2.1.1 |
cxMcVoxFxsOpePortUsedDisplays the number of the voice I/O port.
You cannot modify this object
Options:
CX900: 1 is the only acceptable value. Each I/O card has only 1 port.
CX1000: up to 15 for the DI600
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.2.1.2 |
cxMcVoxFxsOpePortStatusDisplays the functional status of the operative port.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmportStatus of the cxMcVox Administrative
FXS Driver Group.
Options:
disable (1): port is not functional
enabled (2): port is up and active
no-voice-io (3): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-1 (31): = Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-2 (32): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-3 (33): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-4 (34): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-1 (41): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-2 (42): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-3 (43): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-4 (44): Memotec use only. Contact Memotec service personnel if
this value displays.
Default Value: disable (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.3 |
cxMcVoxFxsOpeVocoderDisplays the transmission speed (in bits per second) of the compressed
voice stream on the operative FXS port. Defining the speed also sets the
ACELP voice compression ratio.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmVocoder of the cxMcVox Administrative FXS
Driver Group.
Options:
bps5800 (1): compresses at a higher rate and uses slightly less bandwidth.
bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a
higher quality voice sound at the receiving end.
opt3 (3): ADPCM 40.
opt4 (4): ADPCM 32.
opt5 (5): ADPCM 24.
opt6 (6): ADPCM 16.
opt7 (7): Memotec use only.
opt8 (8): Memotec use only.
Default Value: bps8000 (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.4 |
cxMcVoxFxsOpeFaxBwDetermines the speed (in bits per second) of the FAX channel on the
operative FXS port. This value also determines the bandwidth required to
pass FAX traffic through the voice software. This value can be set to
match the speed of your FAX machine or it can be lowered to reduce
bandwidth allocation.
Options:
bps2400 (1)
bps4800 (2)
bps7200 (3)
bps9600 (4)
Default Value: bps7200 (3)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.5 |
cxMcVoxFxsOpeAutoCnxObsoleteroobsolete Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.6 |
cxMcVoxFxsOpePathIdPath IDs no longer exist in the new Voice Routing (VR) scheme.
The PathID was formerly used for auto-connection on the operative FXS
port.
The Path ID is a numeric dialing code the user enters to gain access to
the remote telephone or fax machine.
Note: The number of digits in the Path ID must match the value of the
object cxMcVoxPathOpePathLng of the cxMcVox Operative Path Group.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmPathId of the cxMcVox Administrative FXS
Driver Group.
Range of Values: 1 to 4 numeric digits
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.2.1.7 |
cxMcVoxFxsOpeTxGainDetermines the value defining the sound intensity (loudness) of voice
transmissions on the operative FXS port. The transmission gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Transmission gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the local listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.2.1.8 |
cxMcVoxFxsOpeRxGainDetermines the value defining the sound intensity (loudness) of voice
reception on the operative FXS port. The reception gain can be modified in
the administrative configuration or be fine-tuned dynamically.
Note: Reception gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the remote listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.2.1.9 |
cxMcVoxFxsOpeEchoCancelDisplays the state of echo cancellation on the operative FXS port. When
set to 'enable' at both the local and remote ends, echo cancellation stops
echoes from the remote that are heard through the receiver at the local
end.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmEchoCancel of the cxMcVox Administrative
FXS Driver Group.
Options:
disable (1)
enable (2)
Default Value: enable (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.10 |
cxMcVoxFxsOpeSignalingDisplays the type of signalling the operative FXS port uses to seize the
line.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxfxsAdmSignaling of the cxMcVox Administrative FXS
Driver Group.
Options:
ground-start (1)
loop-start (2)
did (3)
Default Value: loop-startro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.11 |
cxMcVoxFxsOpeTimeOnObsoleteroobsolete INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.2.1.12 |
cxMcVoxFxsOpeTimeOffObsoletedroobsolete INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.2.1.13 |
cxMcVoxFxsOpeCnctTypeDisplays the method the operative FXS port uses to make connections.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmCnctType of the cxMcVox Administrative FXS
Driver Group.
Options:
switched (1): the port connects each call according to the dialing code
the user enters.
auto-connect (2): calls passing through this port always terminate at the
same remote destination. The port connects to the remote as soon as the
local receiver enters the off-hook state. Any remote can connect to a port
with an auto-connect configuration but when the local user initiates the
call it always goes to the same remote.
fixed (3): calls passing through this port always terminate at the same
remote destination. The port connects to the remote as soon as the local
receiver enters the off-hook state. Only the local and remote destinations
of the connection can use this port. No other remote location can gain
access to this port.
Default Value: switched (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.14 |
cxMcVoxFxsOpeRingTypeDisplays the ring type of the operative FXS port. The ring types provide
different ring timing to match the different ring cycles in networks.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmRingType of the cxMcVox Administrative FXS
Driver Group.
Options:
north-american (1)
international (2)
Default Value: north-american (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.15 |
cxMcVoxFxsOpeImpedanceDisplays the input line impedance of the operative FXS interface.
The value of this object can be modified in operational mode.
Options:
i600-ohms (1)
i900-ohms (2)
att (3)
aus (4)
Default Value: i600-ohms
NOTE: The option aus(4) is added only starting at version 11.
NOTE: This object is READ-ONLY for the CX800.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.16 |
cxMcVoxFxsOpeDialTypeDisplays the dialing method of the operative FXS port. The dialing method
refers to the sound that occurs when the user enters each digit of the
dialing code.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmDialType of the cxMcVox Administrative FXS
Driver Group table.
Options:
dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to
identify the code the user dials. Tones are generated at a level of -7
plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3
dBm for the higher frequency group. The power level of the higher
frequency tone is intentionally increased to compensate for the higher
line loss.
pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone
frequency (2280Hz) to generate the codes the user enters. Tones are
generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number
of pulses during one second indicates the code the user dials. With the
E&M interface, the voice station generates and detects pulses.
Default Value: dtmf (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.17 |
cxMcVoxFxsOpeDidSignalTypeDisplays the type of signaling on the operative FXS port. The signaling
type refers to the line seizure technique.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmDidSignalType of the cxMcVox Administrative
FXS Driver Group table.
Options
normal (1)
delay (2)
wink (3)
Default Value: normal (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.18 |
cxMcVoxFxsOpeRmtExtDetermines the Remote Extension or Group Id used for auto-connection on
the FXS port.
The Remote Extension is a numeric dialing code that the user enters to
gain access to the remote telephone or fax machine.
Auto-connection is the connection method that this port uses. A particular
Remote Extension or Group Id has been assigned to the port so that no
dialing is required.
Note: The number of digits in the Remote Extension is determined by the
object cxMcVoxNetNbDigits of the cxMcVox Global Parameters Group.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: operativero DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.2.1.19 |
cxMcVoxFxsOpeRmtIdDisplays the ID (name) for the remote voice station.
Note: This object must be defined in order to obtain a successful voice
connection via the fixed connection method.
With the fixed connection method, a particular Remote Extension or Group
Id is assigned to the port so that no dialing is required. The call to the
remote is established as soon as the connection is configured.
You cannot modify this object. If you want to change the ID you must
modify the object cxMcVoxFxsAdmRmtId (of this table).
Range of Values: a maximum of 10 alphanumeric characters in upper-case
only. You can use any combination of letters and numbers; however you
cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.2.1.20 |
cxMcVoxFxsOpeTranspModeDetermines the whether to use the Transparent mode on the administrative
port. In the transparent mode, the local port will answer only after
the called party has answered to the party to which the call is finally
destinated.
The Transparent mode is incompatible with Switched type of
connection and is automatically disabled when Switched mode is selected
(only applies to autoconnect and fixed connections).
The Local mode lets the local port answer right away to a seizure.
Options:
emulate (1): Emulation mode is on
transparent (2): Transparent mode on
local (3): Local mode on
Default Value: emulate (1)
Configuration Changed: operationalro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.21 |
cxMcVoxFxsOpeFaxEnableDisplays the state of the FAX on the operative FXS port. When
set to 'enable' at both the local and remote ends, the FAX will be
enabled.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmFaxEnable of the cxMcVox Administrative
FXS Driver Group.
Options:
disable (1)
enable (2)
Default Value: enable (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.22 |
cxMcVoxFxsOpeBroadcastCetermines the state of the voice broadcast feature. When set to none, no
broadcast is used. When set to master, ...
Options:
none (1)
master (2)
slave (3)
Default Value: none (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.2.1.23 |
cxMcVoxFxoOpeTablecx Voice Station active FXO Table. SEQUENCE OF CxMcVoxFxoOpeEntry .1.3.6.1.4.1.495.2.1.1.2.9.3 |
cxMcVoxFxoOpeEntrycx Voice Station active FXO Entry CxMcVoxFxoOpeEntry .1.3.6.1.4.1.495.2.1.1.2.9.3.1 |
cxMcVoxFxoOpeCardUsedDisplays the slot number of the voice I/O card.
You cannot modify this object.
Range of Values:
CX900: 1 to 6
CX1000 1 to 8
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.3.1.1 |
cxMcVoxFxoOpePortUsedDisplays the number of the voice I/O port.
You cannot modify this object.
Options:
CX900: 1 is the only acceptable value. Each I/O card has only 1 port.
CX1000: up to 15 for the DI600
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.3.1.2 |
cxMcVoxFxoOpePortStatusDisplays the functional status of the port.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmportStatus of the cxMcVox Administrative
FXO Driver Group.
Options:
disable (1): port is not functional
enable (2): port is up and active
no-voice-io (3): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-1 (31): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-2 (32): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-3 (33): Memotec use only. Contact Memotec service personnel if
this value displays.
boot-err-4 (34): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-1 (41): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-2 (42): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-3 (43): Memotec use only. Contact Memotec service personnel if
this value displays.
appl-err-4 (44): Memotec use only. Contact Memotec service personnel if
this value displays.
Default Value: disable (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.3 |
cxMcVoxFxoOpeVocoderDisplays the transmission speed (in bits per second) of the compressed
voice stream on the operative FXO port. Defining the speed also sets the
ACELP voice compression ratio.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmVocoder of the cxMcVox Administrative FXO
Driver Group.
Options:
bps5800 (1): compresses at a higher rate and uses slightly less bandwidth.
bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a
higher quality voice sound at the receiving end.
opt3 (3): ADPCM 40.
opt4 (4): ADPCM 32.
opt5 (5): ADPCM 24.
opt6 (6): ADPCM 16.
opt7 (7): Memotec use only.
opt8 (8): Memotec use only.
Default Value: bps8000 (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.4 |
cxMcVoxFxoOpeFaxBwDetermines the speed (in bits per second) of the FAX channel on the
operative FXO port. This value also determines the bandwidth required to
pass FAX traffic through the voice software. This value can be set to
match the speed of your FAX machine or it can be lowered to reduce
bandwidth allocation.
Options:
bps2400 (1)
bps4800 (2)
bps7200 (3)
bps9600 (4)
Default Value: bps7200 (3)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.5 |
cxMcVoxFxoOpeAutoCnxObsoleteroobsolete Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.6 |
cxMcVoxFxoOpePathIdPath IDs no longer exist in the new Voice Routing (VR) scheme.
The PathID was formerly used for auto-connection on the operative FXO
port.
The Path ID is a numeric dialing code that the user enters to gain access
to the remote telephone or fax machine.
Note: The number of digits in the Path ID must match the value of the
object cxMcVoxPathOpePathLng of the cxMcVox Operative Path Group.
You cannot modify this object. If you want to change the value you modify
the object cxMcVoxFxoAdmPathId of the cxMcVox Administrative FXO Driver
Group.
Range of Values: 1 to 4 digits
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.3.1.7 |
cxMcVoxFxoOpeTxGainDetermines the value defining the sound intensity (loudness) of voice
transmissions on the operative FXO port. The transmission gain can be
modified in the administrative configuration or be fine-tuned dynamically.
Note: Transmission gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the local listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.3.1.8 |
cxMcVoxFxoOpeRxGainDetermines the value defining the sound intensity (loudness) of voice
reception on the operative FXO port. The reception gain can be modified in
the administrative configuration or be fine-tuned dynamically.
Note: Reception gains should be modified during a connection (i.e.
dynamically) as changes in the value affect the remote listener.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 960
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.9.3.1.9 |
cxMcVoxFxoOpeEchoCancelDisplays the state of echo cancellation on the operative FXO port. When
set to 'enable' at both the local and remote ends, echo cancellation stops
echoes from the remote that are heard through the receiver at the local
end.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmEchoCancel of the cxMcVox Administrative
FXO Driver Group.
Options:
disable (1)
enable (2)
Default Value: enable (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.10 |
cxMcVoxFxoOpeSignalingDisplays the type of signalling the operative FXO port uses to seize the
line.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmSignaling of the cxMcVox Administrative FXO
Driver Group.
Options:
ground-start (1)
loop-start (2)
did (3)
Default Value: loop-startro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.11 |
cxMcVoxFxoOpeCnctTypeDisplays the method the operative FXO port uses to make connections.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmCnctType of the cxMcVox Administrative FXO
Driver Group.
Options:
switched (1): the port connects each call according to the dialing code
the user enters.
auto-connect (2): calls passing through this port always terminate at the
same remote destination. The port connects to the remote as soon as the
local receiver enters the off-hook state. Any remote can connect to a port
with an auto-connect configuration but when the local user initiates the
call it always goes to the same remote.
fixed (3): calls passing through this port always terminate at the same
remote destination. The port connects to the remote as soon as the local
receiver enters the off-hook state. Only the local and remote destinations
of the connection can use this port. No other remote location can gain
access to this port.
Default Value: switched (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.12 |
cxMcVoxFxoOpeRingTypeDisplays the ring type of the operative FXO port. The ring types provide
different ring timing to match the different ring cycles in networks.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmRingType of the cxMcVox Administrative FXO
Driver Group.
Options:
north-american (1)
international (2)
Default Value: north-american (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.13 |
cxMcVoxFxoOpeImpedanceDisplays the input line impedance of the operative FXO interface.
The value of this object can be modified in operational mode.
Options:
i600-ohms (1)
i900-ohms (2)
att (3)
aus (4)
Default Value: i600-ohms (1)
NOTE: The option aus(4) is added only starting at version 11.
NOTE: This object is READ-ONLY for the CX800.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.14 |
cxMcVoxFxoOpeDialTypeDisplays the dialing method of the operative FXO port. The dialing method
refers to the sound that occurs when the user enters each digit of the
dialing code.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmDialType of the cxMcVox Administrative FXO
Driver Group table.
Options:
dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to
identify the code the user dials. Tones are generated at a level of -7
plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3
dBm for the higher frequency group. The power level of the higher
frequency tone is intentionally increased to compensate for the higher
line loss.
pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone
frequency (2280Hz) to generate the codes the user enters. Tones are
generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number
of pulses during one second indicates the code the user dials. With the
E&M interface, the voice station generates and detects pulses.
Default Value: dtmf (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.15 |
cxMcVoxFxoOpeDidSignalTypeDisplays the type of signaling on the operative FXO port. The signaling
type refers to the line seizure technique.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmDidSignalType of the cxMcVox Administrative
FXO Driver Group table.
Options
normal (1)
delay (2)
wink (3)
Default Value: normal (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.16 |
cxMcVoxFxoOpeRmtExtDetermines the Remote Extension or Group Id used for auto-connection on
the FXO port.
The Remote Extension is a numeric dialing code that the user enters to
gain access to the remote telephone or fax machine.
Auto-connection is the connection method that this port uses. A particular
Remote Extension or Group Id has been assigned to the port so that no
dialing is required.
Note: The number of digits in the Remote Extension is determined by the
object cxMcVoxNetNbDigits of the cxMcVox Global Parameters Group.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: operativero DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.3.1.17 |
cxMcVoxFxoOpeRmtIdDisplays the ID (name) for the remote voice station.
Note: This object must be defined in order to obtain a successful voice
connection via the fixed connection method.
With the fixed connection method, a particular Remote Extension or Group
Id is assigned to the port so that no dialing is required. The call to the
remote is established as soon as the connection is configured.
You cannot modify this object. If you want to change the ID you must
modify the object cxMcVoxFxoAdmRmtId (of this table).
Range of Values: a maximum of 10 alphanumeric characters in upper-case
only. You can use any combination of letters and numbers; however you
cannot use blank spaces. Use a dash or underscore as a delimiter.
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.9.3.1.18 |
cxMcVoxFxoOpeTranspModeDetermines the whether to use the Transparent mode on the administrative
port. In the transparent mode, the local port will answer only after
the called party has answered to the party to which the call is finally
destinated.
The Transparent mode is incompatible with Switched type of
connection and is automatically disabled when Switched mode is selected
(only applies to autoconnect and fixed connections).
The Local mode lets the local port answer right away to a seizure.
Options:
emulate (1): Emulation mode is on
transparent (2): Transparent mode on
local (3): Local mode on
Default Value: emulate (1)
Configuration Changed: operationalro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.19 |
cxMcVoxFxoOpeFaxEnableDisplays the state of the FAX on the operative FXO port. When
set to 'enable' at both the local and remote ends, the FAX will be
enabled.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxoAdmFaxEnable of the cxMcVox Administrative
FXO Driver Group.
Options:
disable (1)
enable (2)
Default Value: enable (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.20 |
cxMcVoxFxoOpeBroadcastCetermines the state of the voice broadcast feature. When set to none, no
broadcast is used. When set to master, ...
Options:
none (1)
master (2)
slave (3)
Default Value: none (1)ro Enumeration .1.3.6.1.4.1.495.2.1.1.2.9.3.1.21 |
cxMcVoxGrpIdAdmTableVoice Station Group Id identification Table. SEQUENCE OF CxMcVoxGrpIdAdmEntry .1.3.6.1.4.1.495.2.1.1.2.10 |
cxMcVoxGrpIdAdmEntryAssociates an entry in the GroupId table with a pathId-like identifier
for that groupId. CxMcVoxGrpIdAdmEntry .1.3.6.1.4.1.495.2.1.1.2.10.1 |
cxMcVoxGrpIdAdmIndexDisplays the index number of the administrative Group ID.
You cannot modify this object. It is a display that the software provides.
Range of Values: 1 to 32
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.10.1.1 |
cxMcVoxGrpIdAdmDetermines the administrative Group ID.
The Group ID is a dialing code that the user enters to gain access to a
remote telephone or FAX machine. The group contains up to 48 different
Path IDs. Each of these Path IDs (i.e. specific routes to a destination)
are polled until one of them is available to handle the call. Each of the
Path IDs in the group must be on a separate CPU at the destination.
Range of Values: 1 to 4 numeric digits
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.10.1.2 |
cxMcVoxGrpIdLenAdmDetermines the length (in digits) of the administrative Group ID.
Range of Values: 1 to 4
Default Value: 3
Configuration Changed: administrativero INTEGER .1.3.6.1.4.1.495.2.1.1.2.10.1.3 |
cxMcVoxGrpIdAdmRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): row is flagged; after the next reset the values will be
disabled and the row will be deleted from the table.
valid (2): values are enabled.
Default Value: valid (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.10.1.4 |
cxMcVoxGrpIdAdmNbPollDetermines the maximum number of remote voice stations in an Extension
Group that the local voice station polls with a single call request.
Note: This object is only relevant if at least one Remote Extension Group
ID has been defined using the objects in the cxMcVox Administrative Grp
Group.
Range of Values: 1 to 20
Default Value: 4
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.10.1.5 |
cxMcVoxGrpIdOpeTablecx Voice Station Group Id identification Table. SEQUENCE OF CxMcVoxGrpIdOpeEntry .1.3.6.1.4.1.495.2.1.1.2.11 |
cxMcVoxGrpIdOpeEntryAssociates an entry in the GroupId table with a pathId-like identifier
for that groupId. CxMcVoxGrpIdOpeEntry .1.3.6.1.4.1.495.2.1.1.2.11.1 |
cxMcVoxGrpIdOpeIndexDisplays the index number of the operative Group ID.
You cannot modify this object.
Range of Values: 1 to 32
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.11.1.1 |
cxMcVoxGrpIdOpeDisplays the operative Group ID.
The Group ID is a dialing code the user enters to gain access to the
remote telephone or FAX machine. The Group ID contains up to 48 different
Path IDs. Each of these Path IDs (i.e. specific routes to a destination)
are polled until one of them is available to handle the call. Each of the
Path IDs in the group must be on a separate CPU at the destination.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxGrpIdAdm of the cxMcVox Administrative Group ID
Identificastion Group.
Range of Values: 1 to 4 numeric digits
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.11.1.2 |
cxMcVoxGrpIdLenOpeDetermines the length (in digits) of the operative Group ID.
You cannot moify this object. If you want to change the value you must
modify the object cxMcVoxGrpIdLenAdm of the cxMcVox Administrative GROUPID
identification group
Range of Values: 1 to 4
Default Value: 3ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.11.1.3 |
cxMcVoxGrpIdOpeNbPollDetermines the maximum number of remote voice stations in an Extension
Group that the local voice station polls with a single call request.
Note: This object is only relevant if at least one Remote Extension Group
ID has been defined using the objects in the cxMcVox Operative Grp Group.
Range of Values: 1 to 20
Default Value: 4
Configuration Changed: operativero INTEGER .1.3.6.1.4.1.495.2.1.1.2.11.1.4 |
cxMcVoxGrpDefAdmTablePlanned GroupID definition table. SEQUENCE OF CxMcVoxGrpDefAdmEntry .1.3.6.1.4.1.495.2.1.1.2.12 |
cxMcVoxGrpDefAdmEntryPlanned GroupID row definition. CxMcVoxGrpDefAdmEntry .1.3.6.1.4.1.495.2.1.1.2.12.1 |
cxMcVoxGrpDefAdmIndexDisplays the index number of the administrative Group ID.
You cannot modify this object.
Range of Values: 1 to 32
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.12.1.1 |
cxMcVoxGrpDefAdmPriorityDisplays the polling priority level of the administrative Path ID.
When the user places a call by entering the Group ID, all Path IDs that
you include in the group will be polled according to their priority until
one is available to handle the call.
You add a Path ID to a Group ID using the object cxMcVoxGrpDefAdmPathId of
this table.
You cannot modify this object.
Range of Values: 1 to 48. A value of 1 assigns the highest priority to the
Path ID.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.12.1.2 |
cxMcVoxGrpDefAdmRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): row is flagged; after the next reset the values will be
disabled and the row will be deleted from the table.
valid (2): values are enabled.
Default: valid (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.12.1.3 |
cxMcVoxGrpDefAdmPathIdDetermines the Path ID you want to include in the administrative
Group ID.
When you include a Path ID in the Group ID, the software automatically
assigns a polling priority to it (see the object cxMcVoxGrpDefAdmPriority
of this table).
When the user places a call by entering the Group ID, all Path IDs that
you include in the group will be polled according to their priority until
one is available to handle the call.
Range of Values: 1 to 4 numeric digits
Default Value: none
Configuration Changed: administrativerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.12.1.4 |
cxMcVoxGrpDefAdmRmtExtDetermines the Remote Extension that you want to include in the Group ID.
When you include a Remote Extension in the Group ID, the software
automatically assigns a polling priority to it (see the object
cxMcVoxGrpDefAdmPriority of this table).
When the user places a call by entering the Group ID, all Remote
Extensions that you include in the group will be polled according to their
priority until one is available to handle the call.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.12.1.5 |
cxMcVoxGrpDefOpeTableActive GroupID definition table. SEQUENCE OF CxMcVoxGrpDefOpeEntry .1.3.6.1.4.1.495.2.1.1.2.13 |
cxMcVoxGrpDefOpeEntryActive GroupID row definition. CxMcVoxGrpDefOpeEntry .1.3.6.1.4.1.495.2.1.1.2.13.1 |
cxMcVoxGrpDefOpeIndexDisplays the index number of the operative Group ID.
You cannot modify this object.
Range of Values: 1 to 32
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.13.1.1 |
cxMcVoxGrpDefOpePriorityDisplays the polling priority level of the operative Path ID.
When the user places a call by entering the Group ID, all Path IDs that
you include in the group will be polled according to their priority until
one is available to handle the call.
You add a Path ID to a Group ID using the object cxMcVoxGrpDefAdmPathId of
the cxMcVox Administrative Grp Group.
You cannot modify this object
Range of Values: 1 to 48. A value of 1 assigns the highest priority to the
Path ID.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.13.1.2 |
cxMcVoxGrpDefOpePathIdDisplays the Path ID included in the operative Group ID.
When you include a Path ID in the Group ID, the software automatically
assigns a polling priority to it (see the object cxMcVoxGrpDefAdmPriority
of this table).
When the user places a call by entering the Group ID, all Path IDs that
you include in the group will be polled according to their priority until
one is available to handle the call.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxGrpDefAdmPathId of the cxMcVox Administrative GRP
Group
Range of Values: 1 to 4 numeric digits
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.13.1.3 |
cxMcVoxGrpDefOpeRmtExtDetermines the Remote Extension that you want to include in the Group ID.
When you include a Remote Extension in the Group ID, the software
automatically assigns a polling priority to it (see the object
cxMcVoxGrpDefOpePriority of this table).
When the user places a call by entering the Group ID, all Remote
Extensions that you include in the group will be polled according to their
priority, until one is available to handle the call.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: operativero DisplayString .1.3.6.1.4.1.495.2.1.1.2.13.1.4 |
cxMcVoxAdmPinTablePersonal identification number Table. SEQUENCE OF CxMcVoxAdmPinEntry .1.3.6.1.4.1.495.2.1.1.2.14 |
cxMcVoxAdmPinEntryPersonal identification number row definition. CxMcVoxAdmPinEntry .1.3.6.1.4.1.495.2.1.1.2.14.1 |
cxMcVoxAdmPinIndexDisplays the index number of the Personal Identification Number (PIN).
You cannot modify this object.
Range of Values: 1 to 256
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.14.1.1 |
cxMcVoxAdmPinCodeDetermines the Personal Identification Number (PIN) that is validated by
the local voice station prior to a call being established.
The local voice station verifies that the PIN included in the call request
packet is listed in its PIN table. If it is not,the call will not be
established and the user will hear a fast busy signal.
Range of Values: 2 to 8 digits from 0 to 9
Default Value: nonerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.14.1.2 |
cxMcVoxAdmPinRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): row is flagged; after the next reset the values will be
disabled and the row will be deleted from the table.
valid (2): values are enabled
Default Value: nonerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.14.1.3 |
cxMcVoxOpePinTablePersonal identification number Table. SEQUENCE OF CxMcVoxOpePinEntry .1.3.6.1.4.1.495.2.1.1.2.15 |
cxMcVoxOpePinEntryPersonal identification number row definition. CxMcVoxOpePinEntry .1.3.6.1.4.1.495.2.1.1.2.15.1 |
cxMcVoxOpePinIndexDisplays the index number of the Personal identification Number (PIN).
You cannot modify this object.
Range of Values: 1 to 256.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.15.1.1 |
cxMcVoxOpePinCodeDisplays the Personal Identification Number (PIN) that is validated by the
local voice station prior to a call being established.
The local voice station verifies that the PIN included in the call request
packet is listed in its PIN table. If it is not,the call will not be
established and the user will hear a fast busy signal.
Range of Values: 2 to 8 digits from 0 to 9
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.15.1.2 |
cxMcVoxAdmLclZoneTableLocal Zone Codes Table. SEQUENCE OF CxMcVoxAdmLclZoneEntry .1.3.6.1.4.1.495.2.1.1.2.16 |
cxMcVoxAdmLclZoneEntryLocal Zones codes row definition. CxMcVoxAdmLclZoneEntry .1.3.6.1.4.1.495.2.1.1.2.16.1 |
cxMcVoxAdmLclZoneIndexDisplays the index number of the administrative local zone code.
Range of Values: 1 to 128.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.16.1.1 |
cxMcVoxAdmLclZoneCodeDetermines the number of the administrative local zone code which will
serve in the verification of the phone number to be dialed depending on
where the remote site is installed.
Range of Values: 1 to 4 digits from 0 to 9
Note: The * character is used as a wildcard character. Only one wildcard
character can be used per zone code.
Default Value: nonerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.16.1.2 |
cxMcVoxAdmLclZoneLngDetermines the length (in digits) of the administrative local zone code.
Range of Values: 1 to 4
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.16.1.3 |
cxMcVoxAdmLclZoneRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): row is flagged; after the next reset the values will be
disabled and the row will be deleted from the table.
valid (2): values are enabled
Default Value: nonerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.16.1.4 |
cxMcVoxOpeLclZoneTableLocal Zones Codes Table. SEQUENCE OF CxMcVoxOpeLclZoneEntry .1.3.6.1.4.1.495.2.1.1.2.17 |
cxMcVoxOpeLclZoneEntryLocal Zones codes row definition. CxMcVoxOpeLclZoneEntry .1.3.6.1.4.1.495.2.1.1.2.17.1 |
cxMcVoxOpeLclZoneIndexDisplays the index number of the operational local zone code.
Range of Values: 1 to 128.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.17.1.1 |
cxMcVoxOpeLclZoneCodeDisplays the number of the operational local zone code which will serve in
the verification of the phone number to be dialed depending on where the
remote CX1000 is installed.
You cannot modify this object. If you want to change the code you must
change the setting of the cxMcVoxAdmLclZoneCode object in the cxMcVox
Administrative Zone Codes Group.
Range of Values: 1 to 4 digits from 0 to 9
Note: The * character is used as a wildcard character. Only one wildcard
character can be used per zone code.
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.17.1.2 |
cxMcVoxOpeLclZoneLngDisplays the length (in digits) of the operational local zone code.
You cannot modify this object. If you want to change the length you must
change the setting of the object cxMcVoxAdmLclZoneLng of the cxMccVox
Administrative Local Zone Codes Group.
Range of Values: 1 to 4
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.17.1.3 |
cxMcVoxAdmRTC OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.18 |
cxMcVoxAdmRTCCountryThe CX900 does not currently support this object.
Determines the number of the administrative local country code which will
serve in the verification of the phone number to be dialed depending on
where the remote CX1000 is installed.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.18.1 |
cxMcVoxAdmRTCCountryLngThe CX900 does not currently support this object.
Determines the length (in digits) of the administrative local country
code.
Range of Values: 1 to 4
Default Value: nonerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.18.2 |
cxMcVoxAdmRTCNonLclCountryThe CX900 does not currently support this object.
Determines the number of the administrative local country code which will
be inserted in front of the Country Code if the latter does not correspond
to the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.18.3 |
cxMcVoxAdmRTCNonLclCountryLngThe CX900 does not currently support this object.
Determines the length (in digits) of the administrative non local country
code.
Range of Values: 1 to 4.
Default Value: nonerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.18.4 |
cxMcVoxAdmRTCAreaThe CX900 does not currently support this object.
Determines the number of the administrative local area code which will
serve in the verification of the phone number to be dialed depending on
where the remote CX1000 is installed.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.18.5 |
cxMcVoxAdmRTCAreaLngThe CX900 does not currently support this object.
Determines the length (in digits) of the administrative local area code.
Range of Values: 1 to 4
Default Value: nonerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.18.6 |
cxMcVoxAdmRTCNonLclAreaThe CX900 does not currently support this object.
Determines the number of the administrative local area code which will be
inserted in front of the Area Code if the latter does not correspond to
the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.18.7 |
cxMcVoxAdmRTCNonLclAreaLngThe CX900 does not currently support this object.
Determines the length (in digits) of the administrative non local area
code.
Range of Values: 1 to 4.
Default Value: nonerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.18.8 |
cxMcVoxAdmRTCNonLclZoneThe CX900 does not currently support this object.
Determines the number of the administrative local zone code which will be
inserted in front of the Zone Code if the latter does not correspond to
the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerwdeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.18.9 |
cxMcVoxAdmRTCNonLclZoneLngThe CX900 does not currently support this object.
Determines the length (in digits) of the administrative non local zone
code.
Range of Values: 1 to 4
Default Value: nonerwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.18.10 |
cxMcVoxOpeRTC OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.19 |
cxMcVoxOpeRTCCountryThe CX900 does not currently support this object.
Displays the number of the operative local country code which will serve
in the verification of the phone number to be dialed depending on where
the remote CX1000 is installed.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: none.rodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.19.1 |
cxMcVoxOpeRTCCountryLngThe CX900 does not currently support this object.
Displays the length (in digits) of the operative local country code.
Range of Values: 1 to 4.
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.19.2 |
cxMcVoxOpeRTCNonLclCountryThe CX900 does not currently support this object.
Displays the number of the operative local country code which will be
inserted in front of the Country Code if the latter does not correspond to
the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.19.3 |
cxMcVoxOpeRTCNonLclCountryLngThe CX900 does not currently support this object.
Displays the length (in digits) of the operative non local country code.
Range of Values: 1 to 4.
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.19.4 |
cxMcVoxOpeRTCAreaThe CX900 does not currently support this object.
Displays the number of the operative local area code which will serve in
the verification of the phone number to be dialed depending on where the
remote CX1000 is installed.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.19.5 |
cxMcVoxOpeRTCAreaLngThe CX900 does not currently support this object.
Displays the length (in digits) of the operative local area code.
Range of Values: 1 to 4.
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.19.6 |
cxMcVoxOpeRTCNonLclAreaThe CX900 does not currently support this object.
Displays the number of the operative local area code which will be
inserted in front of the Area Code if the latter does not correspond to
the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.19.7 |
cxMcVoxOpeRTCNonLclAreaLngThe CX900 does not currently support this object.
Displays the length (in digits) of the operative non local area code.
Range of Values: 1 to 4
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.19.8 |
cxMcVoxOpeRTCNonLclZoneThe CX900 does not currently support this object.
Displays the number of the operative local zone code which will be
inserted in front of the Zone Code if the latter does not correspond to
the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerodeprecated DisplayString .1.3.6.1.4.1.495.2.1.1.2.19.9 |
cxMcVoxOpeRTCNonLclZoneLngThe CX900 does not currently support this object.
Displays the length (in digits) of the operative non local zone code.
Range of Values: 1 to 4
Default Value: nonerodeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.19.10 |
cxMcVoxDriverAdmPriv OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.20 |
cxMcVoxAdmPortPrivTableVoice station planned Table. SEQUENCE OF CxMcVoxAdmPortPrivEntry .1.3.6.1.4.1.495.2.1.1.2.20.1 |
cxMcVoxAdmPortPrivEntryVoice station planned row definition. CxMcVoxAdmPortPrivEntry .1.3.6.1.4.1.495.2.1.1.2.20.1.1 |
cxMcVoxAdmCardUsedDisplays the slot number of the voice I/O card.
You cannot modify this object
Range of Values:
CX900: 1 to 6
CX1000: 1 to 4
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.1 |
cxMcVoxAdmPortUsedDisplays the number of the voice I/O port.
You cannot modify this object. It is a display that the software provides.
Options:
CX900: 1 is the only acceptable value. Each I/O card has only 1 port.
CX1000: up to 15 for the DI600
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.2 |
cxMcVoxAdmRingTimeOnWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 10000
Default Value: 2000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.3 |
cxMcVoxAdmRingTimeOff1WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 10000
Default Value: 4000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.4 |
cxMcVoxAdmRingTimeOff2WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 10000
Default Value: 2000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.5 |
cxMcVoxAdmEchoCancelLevelWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 65535
Default Value: 100rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.6 |
cxMcVoxAdmToneDelayAfterCnctWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 6000
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.7 |
cxMcVoxAdmToneDelayAfterFlashWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 6000
Default Value: 400rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.8 |
cxMcVoxAdmToneOffsetTxGainWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.9 |
cxMcVoxAdmVoiceOffsetTxGainWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.10 |
cxMcVoxAdmAc15InterDigitWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 800rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.11 |
cxMcVoxAdmMfToneTholdWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 255
Default Value: 60rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.12 |
cxMcVoxAdmPulseTminWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 3000
Default Value: 15rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.13 |
cxMcVoxAdmPulseTmaxWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 3000
Default Value: 125rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.14 |
cxMcVoxAdmPulseInterDigitWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 3000
Default Value: 275rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.15 |
cxMcVoxAdmDtmfGuardWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 255
Default Value: 40rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.16 |
cxMcVoxAdmDtmfOpeLevelWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Options:
minus-25 (1)
minus-28 (2)
minus-31 (3)
minus-34 (4)
Default Value: minus-25 (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.20.1.1.17 |
cxMcVoxAdmDtmfTxTimeOnWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 500
Default Value: 75rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.18 |
cxMcVoxAdmDtmfTxTimeOffWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 500
Default Value: 75rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.19 |
cxMcVoxAdmFlashTminWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 50 to 10000
Default Value: 200rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.20 |
cxMcVoxAdmFlashTmaxWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 50 to 10000
Default Value: 800rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.21 |
cxMcVoxAdmFlashTgenWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 50 to 10000
Default Value: 500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.22 |
cxMcVoxAdmAfterToneSilencesWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 127
Default Value: 64rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.23 |
cxMcVoxAdmFaxTxGainWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.24 |
cxMcVoxAdmFaxRxGainWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.25 |
cxMcVoxAdmFaxHdlcFlagsWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 127
Default Value: 2rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.26 |
cxMcVoxAdmFaxPreambleDurationWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 1000rwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.27 |
cxMcVoxAdmFaxPreambleDelayWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 900rwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.28 |
cxMcVoxAdmFaxCedToneDurationWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 500rwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.29 |
cxMcVoxAdmFaxInterProtoGapWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 75rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.30 |
cxMcVoxAdmFaxTimerDetectSyncWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 65000
Default Value: 7500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.31 |
cxMcVoxAdmFaxTimerWaitIdWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 65000
Default Value: 40000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.32 |
cxMcVoxAdmFaxMinPreambleDurWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.33 |
cxMcVoxAdmFaxMaxPreambleDurWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 1200rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.34 |
cxMcVoxAdmFaxMinPreambleDlyWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 400rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.35 |
cxMcVoxAdmFaxMaxPreambleDlyWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 900rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.36 |
cxMcVoxAdmFaxCedToneDetectionWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.37 |
cxMcVoxAdmFaxCedMinToneDurWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 2600rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.38 |
cxMcVoxAdmFaxCedMaxToneDurWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 4000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.39 |
cxMcVoxAdmFaxMaxHdlcFlagsWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 127
Default Value: 32rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.20.1.1.40 |
cxMcVoxDriverOpePriv OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.21 |
cxMcVoxOpePortPrivTableVoice station planned Table. SEQUENCE OF CxMcVoxOpePortPrivEntry .1.3.6.1.4.1.495.2.1.1.2.21.1 |
cxMcVoxOpePortPrivEntryVoice station planned row definition. CxMcVoxOpePortPrivEntry .1.3.6.1.4.1.495.2.1.1.2.21.1.1 |
cxMcVoxOpeCardUsedDisplays the slot number of the voice I/O card.
You cannot modify this object.
Range of Values:
CX900: 1 to 6
CX1000: 1 to 8
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.1 |
cxMcVoxOpePortUsedDisplays the number of the voice I/O port.
You cannot modify this object.
Options:
CX900: 1 is the only acceptable value. Each I/O card has only 1 port.
CX1000: up to 15 for the DI600
Default: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.2 |
cxMcVoxOpeRingTimeOnWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 10000
Default Value: 2000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.3 |
cxMcVoxOpeRingTimeOff1WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 10000
Default Value: 4000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.4 |
cxMcVoxOpeRingTimeOff2WARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 10 to 10000
Default Value: 2000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.5 |
cxMcVoxOpeEchoCancelLevelWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 65535
Default Value: 100rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.6 |
cxMcVoxOpeToneDelayAfterCnctWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 6000
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.7 |
cxMcVoxOpeToneDelayAfterFlashWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 6000
Default Value: 400rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.8 |
cxMcVoxOpeToneOffsetTxGainWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.9 |
cxMcVoxOpeVoiceOffsetTxGainWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.10 |
cxMcVoxOpeAc15InterDigitWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 800rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.11 |
cxMcVoxOpeMfToneTholdWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 255
Default Value: 60rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.12 |
cxMcVoxOpePulseTminWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 3000
Default Value: 15rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.13 |
cxMcVoxOpePulseTmaxWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 3000
Default Value: 125rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.14 |
cxMcVoxOpePulseInterDigitWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 3000
Default Value: 275rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.15 |
cxMcVoxOpeDtmfGuardWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 255
Default Value: 40rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.16 |
cxMcVoxOpeDtmfOpeLevelWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Options:
minus-25 (1)
minus-28 (2)
minus-31 (3)
minus-34 (4)
Default Value: minus-25 (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.21.1.1.17 |
cxMcVoxOpeDtmfTxTimeOnThis object is read-only.
Range of Values: 0 to 500ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.18 |
cxMcVoxOpeDtmfTxTimeOffThis object is read-only.
Range of Values: 0 to 500ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.19 |
cxMcVoxOpeFlashTminWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 50 to 10000
Default Value: 200rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.20 |
cxMcVoxOpeFlashTmaxWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 50 to 10000
Default Value: 800rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.21 |
cxMcVoxOpeFlashTgenWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 50 to 10000
Default Value: 500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.22 |
cxMcVoxOpeAfterToneSilencesThis object is read-only.
Range of Values: 0 to 127ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.23 |
cxMcVoxOpeFaxTxGainWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.24 |
cxMcVoxOpeFaxRxGainWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 820 to 1180 (-18.0dB to 18.0dB)
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.25 |
cxMcVoxOpeFaxHdlcFlagsWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 127
Default Value: 2rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.26 |
cxMcVoxOpeFaxPreambleDurationWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 1000rwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.27 |
cxMcVoxOpeFaxPreambleDelayWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 900rwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.28 |
cxMcVoxOpeFaxCedToneDurationWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 500rwdeprecated INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.29 |
cxMcVoxOpeFaxInterProtoGapWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 75rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.30 |
cxMcVoxOpeFaxTimerDetectSyncWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 65000
Default Value: 7500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.31 |
cxMcVoxOpeFaxTimerWaitIdWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 65000
Default Value: 40000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.32 |
cxMcVoxOpeFaxMinPreambleDurWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 1000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.33 |
cxMcVoxOpeFaxMaxPreambleDurWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 1200rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.34 |
cxMcVoxOpeFaxMinPreambleDlyWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 400rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.35 |
cxMcVoxOpeFaxMaxPreambleDlyWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 900rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.36 |
cxMcVoxOpeFaxCedToneDetectionWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 500rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.37 |
cxMcVoxOpeFaxCedMinToneDurWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 2600rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.38 |
cxMcVoxOpeFaxCedMaxToneDurWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 4000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.39 |
cxMcVoxOpeFaxMaxHdlcFlagsWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 127
Default Value: 32rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.21.1.1.40 |
cxMcVoxTimerOpePriv OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.23 |
cxMcVoxOpeTimerPrivTableVoice station planned Table. SEQUENCE OF CxMcVoxOpeTimerPrivEntry .1.3.6.1.4.1.495.2.1.1.2.23.1 |
cxMcVoxOpeTimerPrivEntryVoice station planned row definition. CxMcVoxOpeTimerPrivEntry .1.3.6.1.4.1.495.2.1.1.2.23.1.1 |
cxMcVoxOpeInterfaceTypeDisplays the interface type of the voice I/O port.
You cannot modify this object
Options:
em (1)
fxs (2)
fxo (3)
Default: nonero Enumeration .1.3.6.1.4.1.495.2.1.1.2.23.1.1.1 |
cxMcVoxOpeTimeSeizeInWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 50rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.2 |
cxMcVoxOpeTimeWaitDialOutWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 100rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.3 |
cxMcVoxOpeTimeWaitDialInWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 200rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.4 |
cxMcVoxOpeTimeDialOutWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 50rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.5 |
cxMcVoxOpeTimeDialInWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 30rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.6 |
cxMcVoxOpeTimeSiOffWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 300rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.7 |
cxMcVoxOpeTimeProceedWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 30000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.8 |
cxMcVoxOpeTimeAnswerWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 60000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.9 |
cxMcVoxOpeTimeBeforeToneOffWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 4000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.10 |
cxMcVoxOpeTimeWinkStartInWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 220rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.11 |
cxMcVoxOpeTimeWinkStartOutWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 125rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.12 |
cxMcVoxOpeTimeWinkMinWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 140rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.13 |
cxMcVoxOpeTimeWinkMaxWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 290rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.14 |
cxMcVoxOpeTimeSeizeWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 250rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.15 |
cxMcVoxOpeTimeDialWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 210rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.16 |
cxMcVoxOpeTimeOffInWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 900rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.17 |
cxMcVoxOpeTimeSiOnWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 100rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.18 |
cxMcVoxOpeTimeOffOutWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 150rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.19 |
cxMcVoxOpeTimeDiscInWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 250rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.20 |
cxMcVoxOpeTimeDiscOutWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 650rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.21 |
cxMcVoxOpeTimeToneOutWARNING: YOU SHOULD NOT MODIFY THIS OBJECT WITHOUT THE SUPERVISION OF
MEMOTEC PERSONNEL.
Range of Values: 0 to 60000
Default Value: 15000rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.23.1.1.22 |
cxMcVoxDiagTableVoice station diagnostics and events Table. SEQUENCE OF CxMcVoxDiagEntry .1.3.6.1.4.1.495.2.1.1.2.24 |
cxMcVoxDiagEntry CxMcVoxDiagEntry .1.3.6.1.4.1.495.2.1.1.2.24.1 |
cxMcVoxDiagCardIndexro INTEGER .1.3.6.1.4.1.495.2.1.1.2.24.1.1 |
cxMcVoxDiagPortIndexro INTEGER .1.3.6.1.4.1.495.2.1.1.2.24.1.2 |
cxMcVoxDiagScvEventsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.3 |
cxMcVoxDiagGsdEventsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.4 |
cxMcVoxDiagToneInEventsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.5 |
cxMcVoxDiagToneOutEventsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.6 |
cxMcVoxDiagFaxInEventsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.7 |
cxMcVoxDiagFaxOutEventsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.8 |
cxMcVoxDiagGlmEventsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.9 |
cxMcVoxDiagIbvDiagsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.10 |
cxMcVoxDiagPcvDiagsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.11 |
cxMcVoxDiagGcvDiagsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.12 |
cxMcVoxDiagFaxDiagsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.13 |
cxMcVoxDiagLseDiagsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.14 |
cxMcVoxDiagScvDiagsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.15 |
cxMcVoxDiagGlmDiagsrw Enumeration .1.3.6.1.4.1.495.2.1.1.2.24.1.16 |
cxMcVoxDownload OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.25 |
cxMcVoxLclExtAdmTablePlanned Local Extensions table. SEQUENCE OF CxMcVoxLclExtAdmEntry .1.3.6.1.4.1.495.2.1.1.2.26 |
cxMcVoxLclExtAdmEntryPlanned Local Extensions row definition. CxMcVoxLclExtAdmEntry .1.3.6.1.4.1.495.2.1.1.2.26.1 |
cxMcVoxLclExtAdmIndexDisplays the index number of the Remote Extension.
You cannot modify this object.
Range of Values: 1 to 64
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.26.1.1 |
cxMcVoxLclExtAdmRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): row is flagged; after the next reset the values are disabled
and the row is deleted from the table.
valid (2): values are enabled.
Default Value: none
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.1.2.26.1.2 |
cxMcVoxLclExtAdmExtDetermines the numeric dialing code to be dialed by remote
located parties to access the local telephone or fax machine.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: administrativerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.26.1.3 |
cxMcVoxLclExtAdmHuntChnlDefines the local voice channels to be polled (hunted) during call
establishment with the Local Extension (specified by object
cxMcVoxLclExtAdmExt).
This value acts as a mask so that all specified channels are polled until
the call is accepted. This hunt channel mask includes a maximum of 30
voice channels.
The default value includes all local voice channels. If you want to
exclude specific channels, calculate the value by following these steps:
1. Decide which ports to include, for example, 1,5,8,29.
2. Convert the list of ports to a series of bits. Start with a list of 30
zeros.
00 0000 0000 0000 0000 0000 0000 0000
To include ports 1, 5, 8, and 29, place 1s in these positions. Numbering
starts at 1 at the extreme right.
01 0000 0000 0000 0000 0000 1001 0001
3. Convert this number to hexadecimal.
10000091
4. Convert this number to decimal.
268 435 601
Range of Values: 1 to 1073741823
Default Value: 1073741823
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.1.2.26.1.4 |
cxMcVoxLclExtOpeTableActive Local Extensions table. SEQUENCE OF CxMcVoxLclExtOpeEntry .1.3.6.1.4.1.495.2.1.1.2.27 |
cxMcVoxLclExtOpeEntryActive Local Extensions row definition. CxMcVoxLclExtOpeEntry .1.3.6.1.4.1.495.2.1.1.2.27.1 |
cxMcVoxLclExtOpeIndexDisplays the index number of the Remote Extension.
You cannot modify this object.
Range of Values: 1 to 64
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.27.1.1 |
cxMcVoxLclExtOpeExtDetermines the numeric dialing code to be dialed by remote located
parties to access the local telephone or fax machine.
Range of Values: 1 to 5 numeric digits
Default Value: none
Configuration Changed: operationalro DisplayString .1.3.6.1.4.1.495.2.1.1.2.27.1.2 |
cxMcVoxLclExtOpeHuntChnlDefines the local voice channels to be polled (hunted) during call
establishment with the Local Extension (specified by object
cxMcVoxLclExtAdmExt).
This value acts as a mask so that all specified channels are polled until
the call is accepted. This hunt channel mask includes a maximum of 30
voice channels.
The default value includes all local voice channels. If you want to
exclude specific channels, calculate the value by following these steps:
1. Decide which ports to include, for example, 1,5,8,29.
2. Convert the list of ports to a series of bits. Start with a list of 30
zeros.
00 0000 0000 0000 0000 0000 0000 0000
To include ports 1, 5, 8, and 29, place 1s in these positions. Numbering
starts at 1 at the extreme right.
01 0000 0000 0000 0000 0000 1001 0001
3. Convert this number to hexadecimal.
10000091
4. Convert this number to decimal.
268 435 601
Range of Values: 1 to 1073741823
Default Value: 1073741823
Configuration Changed: operationalro INTEGER .1.3.6.1.4.1.495.2.1.1.2.27.1.3 |
cxMcVoxRegenOpe OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.28 |
cxMcVoxRegenOpeExtThe RegenOpeExt is used to specify if the local extension tones are
to be regenerated.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.28.1 |
cxMcVoxRegenOpeGidThe RegenOpeGid is used to specify if the group ids tones are to be
regenerated.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.28.2 |
cxMcVoxRegenOpeNbDigitsThe number of digits to be regenerated.rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.28.3 |
cxMcVoxRegenOpeExtBitMaskThis object is a bitmap that selects up to
cxMcVoxRegenOpeNbDigits, which can be set up to
8 digits, corresponding to a bit that is set. The default
value corresponds to 7 (or 00000111 in binary).
Range of Values: 0 to 255
Default Value: 7rw INTEGER .1.3.6.1.4.1.495.2.1.1.2.28.4 |
cxMcVoxTranslOpe OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.2.29 |
cxMcVoxTranslOpeCntryCodeEnableThis specifies whether to translate the local country code.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.29.1 |
cxMcVoxTranslOpeCntryCodeDisplays the number of the operational local country code which will serve
in the verification of the phone number to be dialed depending on where
the remote site is installed.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: none.rw DisplayString .1.3.6.1.4.1.495.2.1.1.2.29.2 |
cxMcVoxTranslOpeCntryCodeLngDisplays the length (in digits) of the operational local country code.
Range of Values: 1 to 4.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.29.3 |
cxMcVoxTranslOpeCCPrefixDisplays the number of the operational local country code which will be
inserted in front of the Country Code if the latter does not correspond to
the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.29.4 |
cxMcVoxTranslOpeCCPrefixLngDisplays the length (in digits) of the operational non local country code.
Range of Values: 1 to 4.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.29.5 |
cxMcVoxTranslOpeAreaCodeEnableThis specifies whether to translate the local area code.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.29.6 |
cxMcVoxTranslOpeAreaCodeDisplays the number of the operational local area code which will serve in
the verification of the phone number to be dialed depending on where the
remote site is installed.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.29.7 |
cxMcVoxTranslOpeAreaCodeLngDisplays the length (in digits) of the operational local area code.
Range of Values: 1 to 4.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.29.8 |
cxMcVoxTranslOpeACPrefixDisplays the number of the operational local area code which will be
inserted in front of the Area Code if the latter does not correspond to
the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.29.9 |
cxMcVoxTranslOpeACPrefixLngDisplays the length (in digits) of the operational non local area code.
Range of Values: 1 to 4
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.29.10 |
cxMcVoxTranslOpeZoneCodeEnableThis specifies whether to translate the local zone code.rw Enumeration .1.3.6.1.4.1.495.2.1.1.2.29.11 |
cxMcVoxTranslOpeZCPrefixDisplays the number of the operational local zone code which will be
inserted in front of the Zone Code if the latter does not correspond to
the local country code parameter.
Range of Values: 1 to 4 digits from 0 to 9
Default Value: nonerw DisplayString .1.3.6.1.4.1.495.2.1.1.2.29.12 |
cxMcVoxTranslOpeZCPrefixLngDisplays the length (in digits) of the operational non local zone code.
Range of Values: 1 to 4
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.29.13 |
cxMcVoxHistoryTableOnLine/OffLine history table for incoming/outgoing calls. SEQUENCE OF CxMcVoxHistoryEntry .1.3.6.1.4.1.495.2.1.1.2.30 |
cxMcVoxHistoryEntryOnline/Offline history row definition. CxMcVoxHistoryEntry .1.3.6.1.4.1.495.2.1.1.2.30.1 |
cxMcVoxHistoryIndexThe index number of the history log.ro INTEGER .1.3.6.1.4.1.495.2.1.1.2.30.1.1 |
cxMcVoxHistoryLclCardNumberDisplays the voice I/O card slot displacement from the CPU card slot.
As an example on the CX1000, card number 1 is directly behind the CPU card
and card number 2 is one slot up. In the case of the CX900 product, this
card number represents the logical slot corresponding to its physical slot
as mapped in the 'voxcard' table.
You cannot modify this object.
Range of Values: 1 to 4
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.30.1.2 |
cxMcVoxHistoryLclPortNumberDisplays the number of the voice I/O port.
You cannot modify this object.
Range of Values: 1 to 15
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.30.1.3 |
cxMcVoxHistoryRmtCardNumberDisplays the remote voice I/O card slot displacement from the CPU card slot. As an example on the CX1000, card number 1 is directly behind th
You cannot modify this object.
Range of Values: 1 to 4
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.30.1.4 |
cxMcVoxHistoryRmtPortNumberDisplays the number of the voice I/O port that was reached at the remote
location.
You cannot modify this object.
Range of Values: 1 to 15
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.1.2.30.1.5 |
cxMcVoxHistoryTimeStampOnLineDisplays the time stamp of the last on-line event. An on-line event is
any incoming or outgoing call that is started. The time stamp indicates the
number of seconds elapsed since the last power up.
You cannot modify this object.
Range of Values:
1 to 4294967295
Default Value: nonero INTEGER(1.. 4294967295) .1.3.6.1.4.1.495.2.1.1.2.30.1.6 |
cxMcVoxHistoryTimeStampOffLineDisplays the time stamp of the last off-line event. An off-line event is
any incoming or outgoing call that the voice station terminates. The time
stamp indicates the number of seconds elapsed since the last power up.
You cannot modify this object.
Range of Values:
1 to 4294967295
Default Value: nonero INTEGER(1.. 4294967295) .1.3.6.1.4.1.495.2.1.1.2.30.1.7 |
cxMcVoxHistoryLnkStateDisplays the status of the link to the remote user. When the call is
successful the status is either 'Incoming' or 'Outgoing'. Else the
error type is displayed.
You cannot modify this object.
Options:
Connection established: either 'Incoming' or 'Outgoing'
Local port unavailable: 'LclPortUnavail'
Remote extension unavailable: 'RmtExtUnavail'
Remote ports busy: 'RmtPortsBusy'
Invalid PIN: 'InvalidPIN'
Call aborted: 'CallAborted'
Default Value: 'CallAborted'ro DisplayString .1.3.6.1.4.1.495.2.1.1.2.30.1.8 |
cxMcVoxHistoryPinDisplays the Personal Identification Number (PIN) that is validated
against the local voice station card PIN number table.
Range of Values: 2 to 8 numeric digits, each number from 0 to 9
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.30.1.9 |
cxMcVoxHistoryExtensionOrGrpIdDisplays the extension or group ID the remote user has dialed to reach
the local user. This object is irrelevant for outgoing calls.
You cannot modify this object.
Range of Values: 1 to 4 numeric digits
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.30.1.10 |
cxMcVoxHistoryPhoneNumberFor outgoing calls, this object displays the complete phone number
(including any voice mail digits) the user entered to reach the remote
user. This can include access code, country code, area code and zone code
but excludes PIN number.
For incoming calls, this object displays either the regenerated code or
the translated code (or both).
Codes that are dialed after the extension or group ID are also logged
in this object both for outgoing and incoming calls.
You cannot modify this object.
Range of Values: 1 to 24 numeric digits
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.1.2.30.1.11 |