CXMCPRT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXMCPRT-MIB.
162
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
162 total| Object Name |
|---|
cxMcPrt OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.495.2.1.1.1 |
cxMcPrtGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.1.1 |
cxMcPrtGlobalConsoleRateThe front panel console rate for the HC600.
Range of Values: 300-19 200
Default Value: 19 200rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.1.1 |
cxMcPrtGlobalResetStatResets all statistics.
Options:
no(1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.1.2 |
cxMcPrtGlobalStationIdThe local station identification. No space allowed in write.rw DisplayString .1.3.6.1.4.1.495.2.1.1.1.1.3 |
cxMcPrtCfgTablecx Port Station Configuration Table. SEQUENCE OF CxMcPrtCfgEntry .1.3.6.1.4.1.495.2.1.1.1.2 |
cxMcPrtCfgEntrycx Port Station Configuration Entry gives the state of the
configuration associated to a particular port. CxMcPrtCfgEntry .1.3.6.1.4.1.495.2.1.1.1.2.1 |
cxMcPrtCfgPortIndexIdentifies the port by a numerical value.
Range of Values: 1-4ro INTEGER .1.3.6.1.4.1.495.2.1.1.1.2.1.1 |
cxMcPrtCfgDriverUsedSpecifies the port driver used. The driver is
associated with a numerical value that identify one of the tables
below the object identifier; cxMcPrtDriver for MC600,
or cxMcPrtDriver for HC600 driver. Note that HC600 has only one driver.
Options:
bop(1): MC600 or HC600
asy(2): MC600 only
cop(3): MC600 only
bsy(4): MC600 onlyrw INTEGER .1.3.6.1.4.1.495.2.1.1.1.2.1.2 |
cxMcPrtCfgReinitPortActivate the planned configurations of the indexed port.
Options:
no (1)
yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.2.1.3 |
cxMcPrtCfgUpdatedThe status of the configuration of a port.
Options:
no (1)
yes (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.1.2.1.4 |
cxMcPrtStatTablecx Port Station Statistic Table. SEQUENCE OF CxMcPrtStatEntry .1.3.6.1.4.1.495.2.1.1.1.3 |
cxMcPrtStatEntrycx Port Station Statistic Entry gives the state of the counters
associated with a particular port. CxMcPrtStatEntry .1.3.6.1.4.1.495.2.1.1.1.3.1 |
cxMcPrtStatPortNumberIndicates the port number of the statistics.
Range of Values: 1-4ro INTEGER .1.3.6.1.4.1.495.2.1.1.1.3.1.1 |
cxMcPrtStatRtsIndicates the current state of the Request to Send signal.
Options:
off (1)
on (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.1.3.1.2 |
cxMcPrtStatDtrIndicates the current state of the Data Terminal Ready signal.
Options:
off (1)
on (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.1.3.1.3 |
cxMcPrtStatDsrIndicates the current state of the Data Set Ready signal.
Options:
off (1)
on (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.1.3.1.4 |
cxMcPrtStatDcdIndicates the current state of the Data Carrier Detect signal.
Options:
off (1)
on (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.1.3.1.5 |
cxMcPrtStatCtsIndicates the current state of the Clear to Send signal.
Options:
off (1)
on (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.1.3.1.6 |
cxMcPrtStatCntMsgTxIndicates the number of frames transmitted on the specified port.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.7 |
cxMcPrtStatCntMsgRxIndicates the number of frames received on the specified port.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.8 |
cxMcPrtStatCntReinitIndicates the number of times that the specified port has reinitialized.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.9 |
cxMcPrtStatCntFlowCtrlTxIndicates the number of times that the specified port has performed
output flow control.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.10 |
cxMcPrtStatCntFlowCtrlRxIndicates the number of times that the specified port has performed
input flow control.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.11 |
cxMcPrtStatCntErrTxIndicates the number of bad frames transmitted on the specified port.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.12 |
cxMcPrtStatCntErrRxIndicates the number of bad frames received on the specified port.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.13 |
cxMcPrtStatCntConnectIndicates the number of connections for the specified port.
The number of connections is equal to the number of times that the DTR
modem signal changed from OFF to ON.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.14 |
cxMcPrtStatCntChrDecompIndicates the number of characters transmitted on the port.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.15 |
cxMcPrtStatCntChrCompIndicates the number of characters received on the port.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.16 |
cxMcPrtStatCntBitDecompIndicates the number of bits transmitted on the port.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.17 |
cxMcPrtStatCntBitCompIndicates the number of bits received on the port.ro Counter .1.3.6.1.4.1.495.2.1.1.1.3.1.18 |
cxMcPrtStatStationIndicates the station that the port is using to transmit and receive
data.ro INTEGER .1.3.6.1.4.1.495.2.1.1.1.3.1.19 |
cxMcPrtStatRouteIndicates the route of the station that the port is using.ro INTEGER .1.3.6.1.4.1.495.2.1.1.1.3.1.20 |
cxMcPrtStatHwInterfaceIndicates whether the hardware port interface is DCE or DTE. The value
depends on the I/O hardware.
Options:
dce (1)
dte (2)ro Enumeration .1.3.6.1.4.1.495.2.1.1.1.3.1.21 |
cxMcPrtStatTimeTicksIndicates the number of milliseconds since the last reset for the current station.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.1.1.3.1.22 |
cxMcPrtPath OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.1.4 |
cxMcPrtPathStationPriThe primary port station.
Range of Values: 1-16
Default Value: 1rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.4.1 |
cxMcPrtPathRoutePriThe primary route.
Range of Values: 1-64
Default Value: 1rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.4.2 |
cxMcPrtPathStationScdThe secondary port station.
Range of Values: 1-16
Default Value: 2rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.4.3 |
cxMcPrtPathRouteScdThe secondary route.
Range of Values: 1-64
Default Value: 2rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.4.4 |
cxMcPrtDriver OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.1.1.5 |
cxMcPrtBopTablecx Port Station MC600 & HC600 Bop Driver Table. SEQUENCE OF CxMcPrtBopEntry .1.3.6.1.4.1.495.2.1.1.1.5.1 |
cxMcPrtBopEntrycx Port Station MC600 & HC600 Bop Driver Entry gives the state of
the variables associated to the Bit Oriented Protocol. CxMcPrtBopEntry .1.3.6.1.4.1.495.2.1.1.1.5.1.1 |
cxMcPrtBopPortUsedIndicates the current port number that is used by the BOP driver.
Range of Values: 1-4ro INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.1 |
cxMcPrtBopPortStatusIndicates whether the port is enabled or disabled.
Options:
disable (1)
enable (2)
Default Value: disable (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.2 |
cxMcPrtBopComRateIndicates the port communication rates.
Range of Values:
HC600: 9600-2048000
MC600: 110-128000
Default Value: HC600: 56 000, MC600: 9600rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.3 |
cxMcPrtBopUseLnkErrPassthroIndicates the link error passthrough state on the port.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.4 |
cxMcPrtBopInterfaceIndicates whether the port interface is DTE or DCE.
Options:
dce (1)
dte (2)
Default Value: dce (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.5 |
cxMcPrtBopRtsDcdModemCtrlUse the RTS or DCD modem control on the port.
Options:
on (1)
vary (2)
Default Value: on (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.6 |
cxMcPrtBopUseRtsDcdCndDataTxUse the state of the RTS or DCD modem control when the port
selected is conditioned by the presence of data in output queue.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.7 |
cxMcPrtBopUseRtsDcdCndLnkUse the state of the RTS or DCD modem control when the port
selected is conditioned by the main link status.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.8 |
cxMcPrtBopUseRtsDcdCndRemUse the state of the RTS or DCD modem control when the port
selected is conditioned by the remote DCD or RTS.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.9 |
cxMcPrtBopDtrCtsModemCtrlUse the DTR or CTS modem control on the port.
Options:
on (1)
vary (2)
Default Value: on (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.10 |
cxMcPrtBopUseDtrCtsCndRtsUse the state of the CTS modem control when the port
selected is conditioned by the local RTS.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.11 |
cxMcPrtBopUseDtrCtsCndLnkUse the state of the RTS or DCD modem control when the port
selected is conditioned by the main link status.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.12 |
cxMcPrtBopUseDtrCtsCndRemUse the state of the RTS or DCD modem control when the port
selected is conditioned by the remote DCD or RTS.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.13 |
cxMcPrtBopLimitBeforeOutThe limit before activation of output for the port.
Range of Values: HC600: 2-100, MC600: 5-4000
Default Value: HC600: 5, MC600: 15rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.14 |
cxMcPrtBopUseOutCndCtsDtrOnUse the output enable on CTS or DTR modem control for the port.
Options:
no(1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.15 |
cxMcPrtBopUseInCndDcdRtsOnUse the input enable on DCD or RTS modem control for the port.
Options:
no(1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.16 |
cxMcPrtBopSyncModeThe clock synchronization for the port.
Options:
normal (1)
extern (2)
Default Value: normal (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.17 |
cxMcPrtBopDataLifetimeThe data lifetime in millisecond for the port.
Range of Values: 1-60000
Default Value: 2000rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.18 |
cxMcPrtBopUseClockSyncThe clocks synchronization on the port.
Options:
no(1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.19 |
cxMcPrtBopUseFlowCtrlClockUse the flow control by clocks for the synchronous port.
Options:
no(1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.20 |
cxMcPrtBopFlowCtrlRateThe flow control rate of the synchronous port.
Range of Values: HC600: 300-5609, MC600: 110-9600
Default Value: HC600: 2400. MC600: 300
HC600 DEFVAL { 2400 }
MC600 DEFVAL { 300 }rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.21 |
cxMcPrtBopLimitOutFlowCtrlThe limit before output flow control of the synchronous port.
Range of Values: HC600: 1-100, MC600: 0-4000
Default Value: HC600: 15, MC600: 3rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.22 |
cxMcPrtBopLimitInFlowCtrlThe overflow limit before input flow control of the synchronous port.
Ranges of Values: HC600: 1-100, MC600: 0-4000
Default Value: HC600: 32, MC600: 512rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.23 |
cxMcPrtBopCodingThe coding on the port for bit-oriented protocols.
Options:
nrz (1)
nrzi (2)
Default Value: nrz (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.24 |
cxMcPrtBopOutIdleStateThe output idle state of the synchronous port.
Options:
flag (1)
mark (2)
Default Value: flag (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.1.1.25 |
cxMcPrtBopDelayBeforeIdleThe delay between frames before idle for the port.
Range of Values: 0-2000
Default Value: 0rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.26 |
cxMcPrtBopOutPreambleLngThe output preamble length of the synchronous port.
Options:
zero (1): HC600 or MC600
one (2): HC600 only
two (3): HC600 only
four (4): HC600 only
eight (5): HC600 only
Default Value: zero (1)rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.1.1.27 |
cxMcPrtAsyTablecx Port Station MC600 Asy Driver Table. SEQUENCE OF CxMcPrtAsyEntry .1.3.6.1.4.1.495.2.1.1.1.5.2 |
cxMcPrtAsyEntrycx Port Station MC600 Asy Driver Entry gives the state of the variables
associated
to the Asynchronous Protocol. CxMcPrtAsyEntry .1.3.6.1.4.1.495.2.1.1.1.5.2.1 |
cxMcPrtAsyPortUsedThe current port number that is used by the ASY driver.ro INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.2.1.1 |
cxMcPrtAsyPortStatusThe port status for enabling or disabling the port.
Options:
disable (1)
enable (2)
Default Value: disable (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.2 |
cxMcPrtAsyComRateThe port communication rates.
Range of Values: 110-128000
Default Value: 9600rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.2.1.3 |
cxMcPrtAsyUseLnkErrPassthroUse the link error pass through on the port.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.4 |
cxMcPrtAsyInterfaceThe port interface to DTE or DCE.
Options:
dce (1)
dte (2)
Default Value: dce (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.5 |
cxMcPrtAsyRtsDcdModemCtrlUse the RTS or DCD modem control on the port.
Options:
on (1)
vary (2)
Default Value: on (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.6 |
cxMcPrtAsyUseRtsDcdCndDataTxUse the state of the RTS or DCD modem control when the port
selected is conditioned by the presence of data in output queue.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.7 |
cxMcPrtAsyUseRtsDcdCndLnkUse the state of the RTS or DCD modem control when the port
selected is conditioned by the main link status.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.8 |
cxMcPrtAsyUseRtsDcdCndRemUse the state of the RTS or DCD modem control when the port
selected is conditioned by the remote DCD or RTS.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.9 |
cxMcPrtAsyDtrCtsModemCtrlUse the DTR or CTS modem control on the port.
Options:
on (1)
vary (2)
Default Value: on (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.10 |
cxMcPrtAsyUseDtrCtsCndRtsUse the state of the CTS modem control when the port
selected is conditioned by the local RTS.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.11 |
cxMcPrtAsyUseDtrCtsCndLnkUse the state of the RTS or DCD modem control when the port
selected is conditioned by the main link status.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.12 |
cxMcPrtAsyUseDtrCtsCndRemUse the state of the RTS or DCD modem control when the port
selected is conditioned by the remote DCD or RTS.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.13 |
cxMcPrtAsyLimitBeforeOutThe limit before activation of output for the port.
Range of Values: 1-100
Default Value: 15rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.2.1.14 |
cxMcPrtAsyOutCndCtsDtrOnUse the output enable on CTS or DTR modem control for the port.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.15 |
cxMcPrtAsyInCndDcdRtsOnUse the input enable on DCD or RTS modem control for the port.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.16 |
cxMcPrtAsySyncModeThe clock synchronization for the port.
Options:
normal (1)
extern (2)
Default Value: normal (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.17 |
cxMcPrtAsyUseDataLifeLimitedUse the data lifetime limited on the asynchronous port.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.18 |
cxMcPrtAsyDataLifetimeThe data lifetime in milliseconds for the port.
Range of Values: 1-60000
Default Value: 2000rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.2.1.19 |
cxMcPrtAsyOutFlowCtrlThe output flow control of the asynchronous port.
Options:
disable (1)
xonxoff (2)
ctsdtr (3)
Default Value: xonxoff (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.20 |
cxMcPrtAsyInFlowCtrlThe input flow control of the asynchronous port.
Options:
disable (1)
xonxoff (2)
ctsdtr (3)
Default Value: xonxoff (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.21 |
cxMcPrtAsyXonChrThe XON character value of the asynchronous port.
Range of Values: 0-255
Default Value: 17rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.2.1.22 |
cxMcPrtAsyXoffChrThe XOFF character value of the asynchronous port.
Range of Values: 0-255
Default Value: 19rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.2.1.23 |
cxMcPrtAsyNbBitPerChrThe number of bits per character on the port.
Options:
six (1)
seven (2)
eight (3)
Default Value: eight (3)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.24 |
cxMcPrtAsyParityThe parity on the port.
Options:
none (1)
even (2)
odd (3)
Default Value: none (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.25 |
cxMcPrtAsyNbStopBitThe number of stop bits per character on the asynchronous port.
Options:
one (1)
onehalf (2)
two (3)
Default Value: one (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.26 |
cxMcPrtAsyUseFlushOutChrThe flush output on specific character on the asynchronous port.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.2.1.27 |
cxMcPrtAsyFlushOutChrThe flush character on the asynchronous port.
Range of Values: 0-255
Default Value: 127rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.2.1.28 |
cxMcPrtCopTablecx Port Station MC600 Cop Driver Table. SEQUENCE OF CxMcPrtCopEntry .1.3.6.1.4.1.495.2.1.1.1.5.3 |
cxMcPrtCopEntrycx Port Station MC600 Cop Driver Entry gives the state of the variables
associated to the Character Oriented Protocol. CxMcPrtCopEntry .1.3.6.1.4.1.495.2.1.1.1.5.3.1 |
cxMcPrtCopPortUsedThe current port number that is used by the COP Driver.
Range of Values: 1-4ro INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.1 |
cxMcPrtCopPortStatusThe port status for enabling or disabling the port.
Options:
disable (1)
enable (2)
Default Value: disable (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.2 |
cxMcPrtCopComRateThe port communication rates.
Range of Values: 110-128000
Default Value: 9600rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.3 |
cxMcPrtCopUseLnkErrPassthroUse the link error pass through on the port.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.4 |
cxMcPrtCopInterfaceTypeThe port interface type: DTE or DCE.
Options:
dce (1)
dte (2)
Default: dce (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.5 |
cxMcPrtCopRtsDcdModemCtrlUse the RTS or DCD modem control on the port.
Options
on (1)
vary (2)
Default Value: on (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.6 |
cxMcPrtCopUseRtsDcdCndDataTxUse the state of the RTS or DCD modem control when the port
selected is conditioned by the presence of data in output queue.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.7 |
cxMcPrtCopUseRtsDcdCndLnkUse the state of the RTS or DCD modem control when the port
selected is conditioned by the main link status.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.8 |
cxMcPrtCopUseRtsDcdCndRemUse the state of the RTS or DCD modem control when the port
selected is conditioned by the remote DCD or RTS.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.9 |
cxMcPrtCopDtrCtsModemCtrlUse the DTR or CTS modem control on the port.
Options:
on (1)
vary (2)
Default Value: on (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.10 |
cxMcPrtCopUseDtrCtsCndRtsUse the state of the CTS modem control when the port
selected is conditioned by the local RTS.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.11 |
cxMcPrtCopUseDtrCtsCndLnkUse the the RTS or DCD modem control when the port
selected is conditioned by the main link status.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.12 |
cxMcPrtCopUseDtrCtsCndRemUse the state of the RTS or DCD modem control when the port
selected is conditioned by the remote DCD or RTS.
Options:
no (1)
yes (2)
Default Value: yes (2)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.13 |
cxMcPrtCopLimitBeforeOutThe limit before activation of output for the port.
Range of Values: 5-4000
Default Value: 15rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.14 |
cxMcPrtCopUseOutCndCtsDtrOnThe output enable on CTS or DTR modem control for the port.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.15 |
cxMcPrtCopUseInCndDcdRtsOnThe input enable on DCD or RTS modem control for the port.
Options:
no (1)
yes (2)
Default Value: no (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.16 |
cxMcPrtCopSyncModeThe clock synchronization for the port.
Options:
normal (1)
extern (2)
Default Value: normal (1)rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.17 |
cxMcPrtCopDataLifetimeThe data lifetime in milliseconds for the port.
Range of Values: 1-60000rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.18 |
cxMcPrtCopUseClockSyncThe clocks synchronization on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.19 |
cxMcPrtCopUseFlowCtrlClockThe use of flow control by clocks of the synchronous port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.20 |
cxMcPrtCopFlowCtrlRateThe use of flow control rate of the synchronous port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.21 |
cxMcPrtCopLimitOutFlowCtrlThe limit before output flow control of the synchronous port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.22 |
cxMcPrtCopLimitInFlowCtrlThe overflow limit before input flow control for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.23 |
cxMcPrtCopOutIdleStateThe output idle state for the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.24 |
cxMcPrtCopNbBitPerChrThe number of bits per character on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.25 |
cxMcPrtCopParityThe parity on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.26 |
cxMcPrtCopSyncChrOneThe synchronization character number one for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.27 |
cxMcPrtCopSyncChrTwoThe synchronization character number two for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.28 |
cxMcPrtCopNbSyncChrThe number of synchronization character for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.29 |
cxMcPrtCopUseDesyncChrUse the desynchronization character on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.30 |
cxMcPrtCopDesyncChrThe desynchronization character for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.31 |
cxMcPrtCopNbDesyncChrThe number of desynchronization character for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.3.1.32 |
cxMcPrtCopUseDesyncRtsFallUse the desynchronization on RTS fall on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.33 |
cxMcPrtCopBitSenseThe bit sense on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.3.1.34 |
cxMcPrtBsyTablecx Port Station MC600 Bsy Driver Table. SEQUENCE OF CxMcPrtBsyEntry .1.3.6.1.4.1.495.2.1.1.1.5.4 |
cxMcPrtBsyEntrycx Port Station MC600 Bsy Driver Entry gives the state of the variables associated
to the Bi-synchronous Protocol. CxMcPrtBsyEntry .1.3.6.1.4.1.495.2.1.1.1.5.4.1 |
cxMcPrtBsyPortUsedThe current port number that is used by the BSY Driver.ro INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.4.1.1 |
cxMcPrtBsyPortStatusThe port status for enabling or disabling the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.2 |
cxMcPrtBsyComRateThe port communication rates.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.4.1.3 |
cxMcPrtBsyUseLnkErrPassthroUse the link error pass through on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.4 |
cxMcPrtBsyInterfaceThe port interface type: DTE or DCE.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.5 |
cxMcPrtBsyRtsDcdModemCtrlUse the RTS or DCD modem control on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.6 |
cxMcPrtBsyUseRtsDcdCndDataTxUse the state of the RTS or DCD modem control when the port
selected is conditioned by the presence of data in output queue.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.7 |
cxMcPrtBsyUseRtsDcdCndLnkUse the state of the RTS or DCD modem control when the port
selected is conditioned by the main link status.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.8 |
cxMcPrtBsyUseRtsDcdCndRemUse the state of the RTS or DCD modem control when the port
selected is conditioned by the remote DCD or RTS.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.9 |
cxMcPrtBsyDtrCtsModemCtrlUse the DTR or CTS modem control on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.10 |
cxMcPrtBsyUseDtrCtsCndRtsUse the state of the CTS modem control when the port
selected is conditioned by the local RTS.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.11 |
cxMcPrtBsyUseDtrCtsCndLnkUse the state of the RTS or DCD modem control when the port
selected is conditioned by the main link status.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.12 |
cxMcPrtBsyUseDtrCtsCndRemUse the state of the RTS or DCD modem control when the port
selected is conditioned by the remote DCD or RTS.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.13 |
cxMcPrtBsyLimitBeforeOutThe limit before activation of output for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.4.1.14 |
cxMcPrtBsyUseOutCndCtsDtrOnUse the output enable on CTS or DTR modem control for the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.15 |
cxMcPrtBsyUseInCndDcdRtsOnUse the input enable on DCD or RTS modem control for the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.16 |
cxMcPrtBsySyncModeThe clock synchronization for the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.17 |
cxMcPrtBsyDataLifetimeThe data lifetime in milliseconds for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.4.1.18 |
cxMcPrtBsyChrSetThe character set on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.19 |
cxMcPrtBsyParityThe parity on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.20 |
cxMcPrtBsyBlkChkChrThe block check character on the port.rw Enumeration .1.3.6.1.4.1.495.2.1.1.1.5.4.1.21 |
cxMcPrtBsyNbSyncChrThe number of synchronization character for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.4.1.22 |
cxMcPrtBsyMaxFrameSizeThe maximum frame size for the port.rw INTEGER .1.3.6.1.4.1.495.2.1.1.1.5.4.1.23 |