CXBCM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
114
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
114 total| Object Name |
|---|
bcmLSapStatusIndicationIndicates that the event identified by global object bcmLSapStatusEvent has
occured at lower access point. This trap is only generated when the global
object bcmTraps is set to value 'enabled'. TRAP-TYPE .1.3.6.1.4.1.495.2.1.6.48.0.1 |
bcmCallHistoryStatusIndicationIndicates that the event identified by global object bcmCallHistoryTable has
occured at upper access point. This trap is only generated when the global
object bcmCallHistoryTraps is set to value 'enabled'. TRAP-TYPE .1.3.6.1.4.1.495.2.1.6.48.0.2 |
RFC1155-SMIDetermines whether this software layers produces the
'bcmUSapStatusIndication' and 'bcmLSapStatusIndication' traps whose
accumulated values can be retrieved by an SNMP-compliant network management
device.
Options:
disabled (1):layer does not produce upper SAP and lower SAP status
traps
enabled (2) :layer produces upper SAP and lower SAP status traps
Default Value: disabled
Configuration Changed: administrativerwobsolete Enumeration .1.3.6.1.4.1.495.2.1.6.48.1 |
bcmCallHistoryTrapsDetermines whether this software layers produces the
'bcmCallHistoryStatusIndication' trap whose accumulated value can be
retrieved by an SNMP-compliant network management device.
WARNING: This object is not supported yet.
Options:
disabled (1):layer does not produce call history trap
enabled (2):layer produces call history trap
Default Value: disabled
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.2 |
bcmSoftwareVersionIdentifies the main version and revision numbers (separated by a period) of
the BCM software layer. The first digit is changed when the software has passed
a certification. The second digit is changed each time a new functionality is
added to the software.
Version 1.00: ISDN BRI User U interface - Not certified
(Supports data only)
2.00: Added ISDN BRI User S/T interface - CTR3 certified
(Supports Data only)
2.10: Added ISDN PRI User/Network CEPT (E1) - Not certified
(Supports voice on PRI and data on BRI and PRI)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.48.3 |
bcmMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.48.4 |
bcmModuleStateIndicates the operational state of the BCM software
layer.
Options:
uninitialized (1): not initialized
initializing (2): in initializing state
registering (3):in registration state
operational (4): in operational state
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.48.40 |
bcmNbActiveUSapIndicates the number of upper SAPS that have been initialized.
Range of Values: 0-20 for BRI ISDN
0-64 for PRI ISDN
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.48.41 |
bcmNbActiveDslIndicates the number of Digital Subscriber Lines (DSLs) which
are synchronized and therefore ready to process calls.
Range of Values: 0-2 for DI600
0-6 for CX900
0-8 for CX950
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.48.42 |
bcmLSapTableA table containing configuration, controls, status and statistics
information about each BCM module layer lower service access point. SEQUENCE OF BcmLSapEntry .1.3.6.1.4.1.495.2.1.6.48.50 |
bcmLSapEntryThe parameters for a specific lower service access point. BcmLSapEntry .1.3.6.1.4.1.495.2.1.6.48.50.1 |
bcmLSapDslNumberIndicates the Digital Subscriber Line number associated
with this lower SAP.
Range of Values: 1-2 for DI600 (port)
1-6 for CX900 (slot)
1-8 for CX950 (slot)
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.48.50.1.1 |
bcmLSapNumberIndicates the row containing objects for configuring or monitoring a SAP
associated with one of the ISDN channels.
Range of Values:
0-2 for BRI
0-30 for PRI (ANSI (T1) will only make use of 0-23)
NOTE: Entry 0 must always be connected to the D channel.
Default Value:nonero LSapIndex .1.3.6.1.4.1.495.2.1.6.48.50.1.2 |
bcmLSapAliasDetermines the textual name that uniquely identifies this lower SAP.
Range of Values: 0-16 alphanumeric characters beginning with a
non-numeric character and ending with up to three numeric characters
Default Value: none
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.48.50.1.3 |
bcmLSapCompanionAliasDetermines the textual name identifying this SAP's companion SAP in the
Bit-Oriented Protocol (BOP) Driver or Q.931 software layer.
Range of Values: 0-16 alphanumeric characters beginning with an alpha character
Default Value: none
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.48.50.1.4 |
bcmLSapDirectoryIndexDetermines the ISDN Address, Subaddress and SPID of this lower SAP.
Range of Values: 1-40 for BRI ISDN
1-128 for PRI ISDN
Default Value: 1
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.48.50.1.10 |
bcmLSapLowDirectoryIndexDetermines the start of an ISDN Address that can be called
from this lower SAP.
Range of Values: 1-40 for BRI ISDN
1-128 for PRI ISDN
NOTE: Only used for DATA calls
Default Value: 1
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.48.50.1.11 |
bcmLSapHighDirectoryIndexDetermines the end of an ISDN Address that can be called
from this lower SAP.
Range of Values: 1-40 for BRI ISDN
1-128 for PRI ISDN
NOTE: Only used for DATA calls
Default Value: 40
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.48.50.1.12 |
bcmLSapStateIndicates the current state of this lower SAP.
Options:
not-used (1): SAP not in use
unbound (2): SAP not bound to another software layer
bound (3):SAP bound to another software layer
registering (4):SAP waits for SPID-EID exchange
(this state is for BRI North American switches only)
idle (5): SAP is idle
outgoing (6):SAP process call request from upper application
incoming (7):SAP process call indication from Digital Subscriber
Line (DSL)
active (8):SAP is active
release (9):SAP released from call
pending (10):SAP bound, wait for link to go up
overlap-rx (11): SAP is receiving calling information over several messages
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.48.50.1.40 |
bcmLSapStatusEventIndicates a status generated by the 'bcmLSapStatusIndication' trap.
Note: This value will always read 'noEvent' unless 'bcmTraps' has been enabled and
an event has been trapped.
Options:
noEvent (1): no trapped event
dslOutOfRange (2): Digital Subscriber Line number out of range
lsapOutOfRange (3): lower SAP number out of range
lsapMngmtRegistrationFailed (4): lower SAP SPID registration failed
Default Value: noEventroobsolete Enumeration .1.3.6.1.4.1.495.2.1.6.48.50.1.41 |
bcmLSapPeerAddressIndicates the ISDN Address of the remote location currently or last called.
Range of Values: 0-16 non-alpha characters (namely, 0123456789*#)
Default Value: none (0 if peer address unknown)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.48.50.1.42 |
bcmLSapPeerSubAddressIndicates the ISDN Subaddress of the remote location currently or last called.
Range of Values: 0-20
Default Value: none (0 if peer address unknown)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.48.50.1.43 |
bcmLSapCallOriginIndicates how the current or last call began at this lower SAP.
Options:
unknown (1): SAP had no call since last system startup
originate (2): SAP originated call
answer (3): SAP answered call
callback (4): SAP called back once not busy
Default Value: unknownro Enumeration .1.3.6.1.4.1.495.2.1.6.48.50.1.44 |
bcmLSapInfoTypeIndicates the transfer capability of the current or last call.
Options:
unknown (1): SAP had no call since last system startup
speech (2): voice call
unrestricted-digital (3): unrestricted data stream
restricted-digital (4): restricted data stream
audio-31 (5): voice call
audio-7 (6): high-quality voice call
video (7): video stream
packet (8): data packets
Default Value: unknownro Enumeration .1.3.6.1.4.1.495.2.1.6.48.50.1.45 |
bcmLSapCallIdIndicates the new call ID in the 'setup' message.
Range of Values: 0-FFFF (hexadecimal)
Note: ID in received messages from 1-7FFF; ID in sent messages
from 8000-FFFF. ID '0' reserved for broadcast messages.
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.6.48.50.1.46 |
bcmLSapUSapIdSpecifies the upper SAP associated with this lower SAP's Digital Subscriber Line.
Range of Values: 1-20 for BRI ISDN
1-64 for PRI ISDN
Default Value: nonero INTEGER ( 1..64 ) .1.3.6.1.4.1.495.2.1.6.48.50.1.47 |
bcmLSapChannelCESIndicates the Connection Endpoint Suffix (CES) of this lower SAP's channel.
For BRI North American switches, when SPIDs are used, the CES will be '1' and
'2' accordingly. But in the case of BRI and PRI which does not use SPID, the
CES is always '1'. When this lower SAP refers to a D channel or if this lower
SAP isn't configured, then the CES is 0 to signal that it is not used.
Range of Values: 0 not used
1-2
Default Value: nonero INTEGER ( 0..2 ) .1.3.6.1.4.1.495.2.1.6.48.50.1.48 |
bcmLSapCallSetupTimeIndicates the system time when the ISDN setup message was sent or received
for the current or last call.
Range of Values: 0-4, 294, 967, 295
Default Value: 0 (= no call since system startup)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.50.1.49 |
bcmLSapCallConnectTimeIndicates the system time when the ISDN connect message was sent or received
for the current or last call.
Range of Values: 0-4, 294, 967, 295
Default Value: 0 (= no call since system startup)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.50.1.50 |
bcmLSapCallDisconnectTimeIndicates the system time when the ISDN disconnect or release message was
sent or received for the current or last call.
Range of Values: 0-4, 294, 967, 295
Default Value: 0 (= no call since system startup)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.50.1.51 |
bcmLSapNbInCallsIndicates the number of incoming calls on this lower SAP since system
startup.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.48.50.1.60 |
bcmLSapNbInCallsConnectedIndicates the number of incoming calls that connected successfully through
this lower SAP since system startup.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.48.50.1.61 |
bcmLSapNbOutCallsIndicates the number of outgoing calls on this lower SAP
since system startup.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.48.50.1.62 |
bcmLSapNbOutCallsConnectedIndicates the number of outgoing calls that connected successfully through
this lower SAP since system startup.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.48.50.1.63 |
bcmDslTableA table containing information about a DSL control block. This DSL access
point is used for the handling of the D and Bs channels that are part of a
DSL (Digital Subscriber Line) SEQUENCE OF BcmDslEntry .1.3.6.1.4.1.495.2.1.6.48.51 |
bcmDslEntryThe parameters for a specific DSL control block. BcmDslEntry .1.3.6.1.4.1.495.2.1.6.48.51.1 |
bcmDslNumberIndicates the Digital Subscriber Line's access point number.
Range of Values: 1-2 for DI600 (port)
1-6 for CX900 (slot)
1-8 for CX950 (slot)
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.48.51.1.1 |
bcmDslRowStatusDetermines whether this DSL is to be removed from service
(i.e. invalidated) within the B-Channel Manager software layer.
Options:
invalid (1): row is flagged; after next reset values will be disabled and row
will be deleted from table
valid (2): values are enabled
Default Value: valid
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.51.1.2 |
bcmDslSwitchTypeDetermines the ISDN switch type supported on the D channel.
Options:
unspecified (1)
bri-5ESS (3): U.S.A / At&T 5ESS
bri-DMS100 (5): U.S.A / Norther Telecom
bri-NI1 (8): U.S.A / National ISDN 1
bri-NI2 (9): U.S.A / National ISDN 2
Default Value: bri-NI1 (8)
Configuration Changed: administrativerwobsolete Enumeration .1.3.6.1.4.1.495.2.1.6.48.51.1.10 |
bcmDslBChannelCountDetermines the total number of B channels managed by the signaling interface.
Range of Values: 1-30
NOTE: It has to be set to: 2 for BRI
23 for ANSI (T1)
30 for CEPT (E1)
Default Value: 2 for BRI
30 for PRI
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.48.51.1.11 |
bcmDslBChannelTypeDetermines the type of ISDN line.
Options:
dialup (1): B channels controlled by associated signaling D channel
leased (2): B channels always connected and not controlled by D channel
(This option is not supported yet)
Default Value: dialup
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.51.1.12 |
bcmDslMngmtTimerDetermines the interval in seconds that the BCM software
layer will wait between two SPIDs transmission when no
answer form the network is received.
Range of Values: 1-255
NOTE: Only used for BRI North American switches in Fully
Initialized Terminal (FIT) mode
Default Value: 45
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.48.51.1.13 |
bcmDslInfoRateDetermines the speed of the B channel connected to the Digital Subscriber
Line when a call is initiated on that DSL.
Options:
rate56kbps (1): B channel speed is 56 kbps
rate64kbps (2): B channel speed is 64 kbps
Default Value: rate64kbps (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.51.1.14 |
bcmDslSendingProceedIndicates the way calling information for the switch is generated.
'en-bloc' means that all calling information is sent in the first message.
overlap means that calling information is spread over several messagesrwobsolete Enumeration .1.3.6.1.4.1.495.2.1.6.48.51.1.15 |
bcmDslInterfaceTypeIndicates the type of physical interface for the specified
Digital Subscriber Line.
Options:
none (1): not specified
bri (2): Basic Rate Interface
pri (3): Primary Rate Interface
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.48.51.1.40 |
bcmDslBriTypeIndicates the type of BRI interface for the specified
Digital Subscriber Line.
Options:
none (1): SAP has no BRI interface
u (2): BRI type is 'U'
s-t (3): BRI type is 'S/T'
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.48.51.1.41 |
bcmDslPriTypeIndicates the type of PRI interface for the specified
Digital Subscriber Line.
Options:
none (1): SAP has no PRI interface
ansi (2): PRI type is 'ANSI' (T1)
cept (3): PRI type is 'CEPT' (E1)
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.48.51.1.42 |
bcmDslNbChannelInUseIndicates the number of B channels connected, connecting, or active on this
Digital Subscriber Line.
Range of Values: 0-2 for BRI
0-23 for ANSI (T1)
0-30 for CEPT (E1)
Default Value: 0ro INTEGER .1.3.6.1.4.1.495.2.1.6.48.51.1.43 |
bcmDslOutGoingCallIdIndicates the call ID used in the 'setup' message sent.
Range of Values: 8000-FFFF (hexadecimal)
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.6.48.51.1.44 |
bcmDslEffectiveRetriesIndicates the number of times a management request has been sent to
initialize the ISDN switch.
Range of Values: 0-255
NOTE: Only used for BRI North American switches
Default Value: 0ro INTEGER .1.3.6.1.4.1.495.2.1.6.48.51.1.45 |
bcmUSapTableA table containing configuration information about each upper service access
point. SEQUENCE OF BcmUSapEntry .1.3.6.1.4.1.495.2.1.6.48.52 |
bcmUSapEntryThe parameters for a specific upper service access point. BcmUSapEntry .1.3.6.1.4.1.495.2.1.6.48.52.1 |
bcmUSapNumberIndicates the row containing objects for configuring or monitoring a SAP
associated with one of the ISDN channels.
Range of Values: 1-20 for BRI ISDN
1-64 for PRI ISDN
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.48.52.1.1 |
bcmUSapRowStatusDetermines whether this SAP is to be removed from service (i.e. invalidated)
within the B-Channel Manager software layer.
Options:
invalid (1): = row is flagged; after next reset values will be disabled and
row will be deleted from table
valid (2): values are enabled
Default Value: invalid
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.2 |
bcmUSapAliasDetermines the textual name uniquely identifying this upper SAP.
Range of Values: 0-16 alphanumeric characters beginning with an alpha
character
Default Value: none
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.48.52.1.3 |
bcmUSapLowDirectoryIndexDetermines the start of an ISDN Address that can call this upper SAP
according to 'bcmUSapAnswerMode'.
Range of Values: 1-40 for BRI ISDN
1-128 for PRI ISDN
Default Value: 1
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.10 |
bcmUSapHighDirectoryIndexDetermines the end of an ISDN Address that can call this upper SAP according
to 'bcmUSapAnswerMode'.
Range of Values: 1-40 for BRI ISDN
1-128 for PRI ISDN
Default Value: 40
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.11 |
bcmUSapAnswerModeDetermines security for accepting incoming call indications
from the DSL.
Options:
answer-none (1): incoming calls not accepted
answer-all (2): incoming calls accepted even without match between
'bcmUSapLowDirectoryIndex' and 'bcmUSapHighDirectoryIndex'
answer-address (3): incoming calls accepted if there is an ISDN address fit
between 'bcmUSapLowDirectoryIndex' and 'bcmUSapHighDirectoryIndex'
answer-subaddress (4): incoming calls accepted if there is an ISDN subaddress
fit between 'bcmUSapLowDirectoryIndex' and 'bcmUSapHighDirectoryIndex'
Default Value: answer-none (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.12 |
bcmUSapPermissionDetermines what actions this upper SAP permits regarding outgoing and
incoming calls.
Options:
originate (1): SAP permits calls to originate through it
answer (2): SAP permits calls to be answered through it
both (3): SAP permits calls both to originate and to be answered through it
callback(4): SAP permits callback after rejecting a call (may use reverse
charging information if available)
Default Value: both
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.13 |
bcmUSapCallTypeAcceptedDetermines the type of call this upper SAP will accept.
Options:
voice-call (1): SAP accepts calls using 'speech', 'audio-31', or 'audio-7'
value in 'bcmSapInfoType'
data-call (2): SAP accepts calls using 'digital', 'digital-56', or
'restricted-digital' value in 'bcmSapInfoType'
packet-call (3): SAP accepts calls using 'packet' value in
'bcmSapInfoType' (this option is not supported)
Default Value: data-call
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.14 |
bcmUSapSendingProceedIndicates the way calling information for the switch is generated.
'en-bloc' means that all calling information is sent in the call request
message (for voice application the message will be sent at the
bcmUSapVoiceInterDigitTimer expiry or if the '#' tone is dialed)
'overlap' means that calling information is spread over several messages.rw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.15 |
bcmUSapVoiceInterDigitTimerIndicates the maximum time in seconds to wait for another digit in 'en-bloc'
sending mode. When this timer expires, a connection attempt will be made with
all the gathered digits
NOTE: This object is used for Voice Applications only.rw INTEGER (1 .. 255) .1.3.6.1.4.1.495.2.1.6.48.52.1.16 |
bcmUSapVoiceHuntGroupDetermines the voice ports number included in the Hunt Group as a bitmap.
A Voice Hunt Group identifies multiple voice ports that can be used locally
to process an incoming call indication from the Digital Subscriber Line (DSL).
It is also used to specify which voice ports can access this upper SAP to make
an outgoing call request. A maximum of 30 voice ports can be mapped in a
single hunt group.
Range of Values:'0000 0000'h to '3FFF FFFF'h
Default Value: '3FFF FFFF'h equals 1073741823
NOTE: This object is used for Voice Applications only.rw INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.17 |
bcmUSapVoiceHuntDslDetermines the Digital Subscriber Line (DSL) numbers included in the DSL
Hunt Group as a bitmap.
The DSL Hunt Group identifies which DSL could be used by this upper SAP when
an outgoing call request from the Voice module is made. It also identifies
which DSL could be used when an incoming call indication from the DSL is
received. A maximum of 2 ports can be mapped in a single DSL hunt group.
Range of Values:'0000 0000'h to '0000 0003'h
Default Value: '0000 0003'h equals 3
NOTE: This object is used for Voice Applications only.rw INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.18 |
bcmUSapVoiceAddressPlanDetermines the Address Plan (corresponding to the Q.931 Information Element
0x70, octet 3, bit 4 to 1) associated to a voice call request from an upper
application (FR/PPP/VOICE).
NOTE: This object is used for Voice Applications only.
Options:
unknown (1): unknown plan
isdn (2): ISDN
telephony (3): telephony
x-121 (4): X.121
telex (5): telex
national (9): national
private (10): private
Default Value: isdn (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.19 |
bcmUSapVoiceAddressTypeDetermines the Address Type (corresponding to the Q.931 Information Element
0x70, octet 3, bit 7 to 5) associated to a voice call request from an upper
application (FR/PPP/VOICE).
NOTE: This object is used for Voice Applications only.
Options:
unknown (1): unknown type
international (2): international
national (3): national
private (4): private
subscriber (5): subscriber
Default Value: international (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.20 |
bcmUSapVoiceCodingSchemeIndicates the voice encoding scheme used for voice calls
that will be initiated locally. This object won't be used
when using the NET3 or NET5 switch types because in that case
the 'A-law' encoding is enforced.
NOTE: This object is used for Voice Applications only.
Default Value: 1
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.21 |
bcmUSapVoiceCallRoutingModeIndicates how this Upper SAP will provide the routing information
to the upper voice layer application. When an incoming call indication
from the Digital Subscriber Line (DSL) is received, the called party
can be used to route this voice call to a remote.
NOTE: This object is used for Voice Applications only.
Options:
not-used (1): incoming call indication called party information is
not used. Routing information has to be provided in-band.
address (2): complete address is used to route the voice call
subaddress (3): complete subaddress is used to route the voice call
address-and-subaddress (4): complete address and subaddress is used to
route the voice call. The address is sent first followed by the subaddress.
Default Value: not-used (1)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.22 |
bcmUSapStateIndicates the current state of this upper SAP.
Options:
not-used (1): SAP not in use
unbound (2): SAP not bound to another software layer
bound (3): SAP bound to another software layer
registering (4): SAP in process of being registered
idle (5): SAP is idle
outgoing (6): SAP process call indication from DSL
incoming (7): SAP process call request from upper application
active (8): SAP is active
release (9): SAP released from call
overlap-rx (11): SAP is receiving calling information over
several messages
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.40 |
bcmUSapStatusEventIndicates a status generated by the 'bcmUSapStatusIndication'
trap.
Note: This value will always read 'noEvent' unless 'bcmTraps' has been
enabled and an event has been trapped.
Options:
noEvent (1): no event trapped
usapOutOfRange (2): upper SAP number out of range
Default Value: noEventroobsolete Enumeration .1.3.6.1.4.1.495.2.1.6.48.52.1.41 |
bcmUSapNbChannelBoundIndicates the number of B channels bound in the current or last call.
Range of Values: 0-30
Default Value: 0 (no call since system startup)ro INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.42 |
bcmUSapTotalConnectTimeIndicates the total time connected to remote parties on both incoming and
outgoing calls since system startup.
Range of Values: 0-4, 294, 967, 295
Default Value: 0 (no call since system startup)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.52.1.43 |
bcmUSapLastSetupTimeIndicates the system time when an ISDN setup message for the current or last
call was last sent or received by this upper SAP.
Range of Values: 0-4, 294, 967, 295
Default Value: 0 (no call since system startup)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.52.1.44 |
bcmUSapLastConnectTimeIndicates the system time when an ISDN connect message for the current of
last call was last sent or received by this upper SAP.
Range of Values: 0-4, 294, 967, 295
Default Value: 0 (no call since system startup)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.52.1.45 |
bcmUSapLastDisconnectTimeIndicates the system time when an ISDN disconnect or release message for the
current or last call was last sent or received by this upper SAP.
Range of Values: 0-4, 294, 967, 295
Default Value: 0 (no call since system startup)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.52.1.46 |
bcmUSapLastDisconnectCauseIndicates the codes for the cause of a disconnect.
Cause Values:
For each class, the description of its cause
value is given. Note that the value corresponds
to the decimal value of the 7 least significant
bits since the bit 8 is always set to 1.
Class 000, Normal Events:
1 Unassigned number
2 No route to specified transit network
3 No route to destination
6 Channel unacceptable
7 Call awarded and deliivered in an established channel
16 Normal call clearing
17 User busy
18 No user responding
19 User alerting, no answer
21 Call rejected
22 Number changed
26 Non-selected user clearing
27 Destination out of order
28 Invalid number format (incompatible number)
29 Facility rejected
30 Response to STATUS ENQUIRY
31 Normal unspecified
Class 010, Network Congestion:
34 No circuit/channel available
38 Network out of order
41 Temporary failure
42 Switching equipment congestion
43 User info discarded
44 Requested channel not available
47 Resources unavailable - unspecified
Class 011, Service or Option Not Available:
49 Quality of service unavailable
50 Requested facility not subscribed
57 Bearer capability not authorized
58 Bearer capability not presently authorized
63 Service or option not available, unspecified
or Option Not Implemented:
65 Bearer capability not implemented
66 Channel type not implemented
69 Requested facility not implemented
70 Only restricted digital information bearer
capability is available
79 Service or option not implemented, unspecified
Class 101, Invalid Message:
81 Invalid call reference value
82 Identified channel does not exist
83 Suspended call exits, but this call identity does not
84 Call identity in use
85 No call suspended
86 Call having the requested call identity has been cleared
88 Incompatible destination
91 Invalid transit network selection
95 Invalid message, unspecified
Class 110, Protocol Error:
96 Mandatory information element is missing
97 Message type non-existent or not implemented
98 Message not compatible with call state or message type
non-existent of not implemented
99 Information element non-existent or not implemented
100 Invalid information element contents
101 Message not compatible with call state
102 Recovery on time expiry
111 Protocol error, unspecified
Class 111, Interworking:
127 Interworking, unspecified
Range of Values: 0-127
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.47 |
bcmUSapDslIdIndicates the Digital Subscriber Line used by the current or last
call.
Range of Values: 0-2 for DI600 (port)
0-6 for CX900 (slot)
0-8 for CX950 (slot)
Default Value: 0 (no call since system startup)ro INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.48 |
bcmUSapLocalSapIdIndicates the upper SAP's ID.
Range of Values: 1-20 for BRI ISDN
1-64 for PRI ISDN
Default Value: noneroobsolete INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.49 |
bcmUSapSpeedDialDirectoryIndexIndicates an address associated with this upper SAP that is used for
speed-dialing by ISDN applications.
Range of Values: 1-40 for BRI ISDN
1-128 for PRI ISDN
NOTE: Only used for DATA calls
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.50 |
bcmUSapVoiceChannelUsedIndicates which voice port used in the current or last call.
Range of Values: 1-15 indicates respective DVDBs 1-15 on DVC 1
16-30 indicates respective DVDBs 1-15 on DVC 2
NOTE: This object is used for Voice Applications only.ro INTEGER .1.3.6.1.4.1.495.2.1.6.48.52.1.51 |
bcmUSapNbSuccessCallsIndicates the number of completed calls to remote parties through this upper
SAP since system startup.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.48.52.1.60 |
bcmUSapNbFailedCallsIndicates the number of failed calls
to remote parties through this upper
SAP since system startup.
Range of Values: 0-4,294,967,295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.48.52.1.61 |
bcmUSapNbRefusedCallsIndicates the number of refused calls to remote parties through this upper
SAP since system startup.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.48.52.1.62 |
bcmDirectoryTableA table containing the ISDN access points. SEQUENCE OF BcmDirectoryEntry .1.3.6.1.4.1.495.2.1.6.48.53 |
bcmDirectoryEntryThe parameters for a specific ISDN access point. BcmDirectoryEntry .1.3.6.1.4.1.495.2.1.6.48.53.1 |
bcmDirectoryNumberIndicates the row containing objects for configuring an ISDN access
point.
Range of Values: 1-40 for BRI ISDN
1-128 for PRI ISDN
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.48.53.1.1 |
bcmDirectoryRowStatusDetermines whether this ISDN access point is to be removed from service
(i.e. invalidated) within the B-Channel Manager software layer.
Options:
invalid (1): row is flagged; after next reset values will be disabled and row
will be deleted from table
valid (2): values are enabled
Default Value: invalid
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.53.1.2 |
bcmDirectoryAddressDetermines the ISDN address or phone
number.
Range of Values: 0-16 non-alpha characters (namely, 0123456789*#)
Default Value: none
Configuration Changed: administrativerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.48.53.1.10 |
bcmDirectoryAddressPlanDetermines the Address Plan (corresponding to the Q.931 Information Element
0x70, octet 3, bit 4 to 1) associated with 'bcmDirectoryAddress'.
Options:
unknown (1): unknown plan
isdn (2): ISDN
telephony (3): telephony
x-121 (4): X.121
telex (5): telex
national (9): national
private (10): private
Default Value: isdn (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.53.1.11 |
bcmDirectoryAddressTypeDetermines the Address Type (corresponding to the Q.931 Information Element
0x70, octet 3, bit 7 to 5) associated with 'bcmDirectoryAddress'.
Options:
unknown (1): unknown type
international (2): international
national (3): national
private (4): private
subscriber (5): subscriber
Default Value: international (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.53.1.12 |
bcmDirectorySubAddressDetermines the ISDN subaddress or phone extension number.
Range of Values: 0-20 non-alpha characters (namely, 0123456789*#)
Note: If the subaddress is not known, this value is left blank.
Default Value: none
Configuration Changed: administrativerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.48.53.1.13 |
bcmDirectorySubAddressTypeDetermines the Subaddress Type (corresponding to the Q.931 Information
Element 0x71, octet 3, bit 7 to 5) associated with 'bcmDirectoryAddress'.
Options:
nsap (1): NSAP (CCITT rec. X-213 [23]/ISO 8348 AD2[24])
user-defines (3): private network
Default Value: user-defines (3)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.48.53.1.14 |
bcmDirectorySpidDetermines the SPID (Service Profile Identifier) for DMS-100, NI-1, NI-2
and, optionally, 5ESS switches supporting BRI.
Range of Values: 0-20 non-alpha characters (namely, 0123456789*#)
Note: If switch does not use SPID, this value is left blank.
Default Value: none
Configuration Changed: administrativerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.48.53.1.15 |
bcmCallHistoryTableA table containing information about specific calls to specific
destination. SEQUENCE OF BcmCallHistoryEntry .1.3.6.1.4.1.495.2.1.6.48.54 |
bcmCallHistoryEntryThe information regarding a single upper SAP connection. BcmCallHistoryEntry .1.3.6.1.4.1.495.2.1.6.48.54.1 |
bcmCallHistoryUSapNumberIndicates the upper SAP involved in this call history.
Range of Values: 1-20 for BRI ISDN
1-64 for PRI ISDN
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.48.54.1.1 |
bcmCallHistoryNumberIndicates the unique identifier for this call history.
Range of Values: 1
Default Value: nonero CHIndex .1.3.6.1.4.1.495.2.1.6.48.54.1.2 |
bcmCallHistoryDslChannelUsedIndicates the Digital Subscriber Line involved in this call history.
Range of Values: 1-2 for DI600 (port)
1-6 for CX900 (slot)
1-8 for CX950 (slot)
Default Value: nonero INTEGER (1 .. 8) .1.3.6.1.4.1.495.2.1.6.48.54.1.40 |
bcmCallHistoryBChannelsUsedIndicates a the B channel(s) that have been used in this call
history (each B channel identified by one-bit position in 32-bit object)
Range of Values: 0-FFFFFFFF hexadecimal
Default Value: nonero DisplayString .1.3.6.1.4.1.495.2.1.6.48.54.1.41 |
bcmCallHistoryPeerAddressIndicates the address to which a call connected in this call history.
Range of Values: 0-16 non-alpha characters (namely, 0123456789*#)
Note: If the number is not known, this value is left blank.
Default Value: nonero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.48.54.1.42 |
bcmCallHistoryPeerSubAddressIndicates the subaddress to which a call connected in this call history.
Range of Values: 0-20 non-alpha characters (namely, 0123456789*#)
Note: If the number is not known, this value is left blank.
Default Value: nonero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.48.54.1.43 |
bcmCallHistoryOriginIndicates the origin of a call in this call history.
Options:
unknown-src (1): unknown origin
originate-src (2): SAP originated call
answer-src (3): SAP answered call
callback-src (4): SAP called back
Default Value: unknown-src (1)ro Enumeration .1.3.6.1.4.1.495.2.1.6.48.54.1.44 |
bcmCallHistorySetupTimeIndicates the system time when the call in this call history was setup.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.54.1.45 |
bcmCallHistoryConnectTimeIndicates the system time when the call in this call history was connected.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.54.1.46 |
bcmCallHistoryDisconnectTimeIndicates the system time when the call in this call history was
disconnected or released.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.48.54.1.47 |
bcmDebugTableA table containing control to access debugging information. SEQUENCE OF BcmDebugEntry .1.3.6.1.4.1.495.2.1.6.48.55 |
bcmDebugEntryThe parameters for a specific structure debugging information. BcmDebugEntry .1.3.6.1.4.1.495.2.1.6.48.55.1 |
bcmDebugNumberIndicates the row containing objects for creating files of debugging
information.
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.48.55.1.1 |
bcmDebugDslCBCreates a file that includes debugging information about DSL
control block structures for the specified DSL.
Range of Values: 1-2 for DI600 (port)
1-6 for CX900 (slot)
1-8 for CX950 (slot)
Warning: You should not modify this object without advice of Memotec
personnel.rw INTEGER ( 1 .. 8 ) .1.3.6.1.4.1.495.2.1.6.48.55.1.10 |
bcmDebugLSapCBCreates a file that includes debugging information about lower
SAP control block structures for the specified SAP.
Range of Values: 1-64 for DI600
1-192 for CX900
1-256 for CX950
Warning: You should not modify this object without advice of Memotec
personnel.rw INTEGER ( 1 .. 256 ) .1.3.6.1.4.1.495.2.1.6.48.55.1.11 |
bcmDebugUSapCBCreates a file that includes debugging information about upper
SAP control block structures for the specified SAP.
Range of Values: 1-20 for BRI ISDN
1-64 for PRI ISDN
Warning: You should not modify this object without advice of Memotec
personnel.rw INTEGER ( 1 .. 64 ) .1.3.6.1.4.1.495.2.1.6.48.55.1.12 |
bcmDebugCallHistoryCBCreates a file that includes debugging information about call
history for the specified SAP.
Range of Values: 1-20 for BRI ISDN
1-64 for PRI ISDN
Warning: You should not modify this object without advice of Memotec
personnel.rw INTEGER ( 1 .. 64 ) .1.3.6.1.4.1.495.2.1.6.48.55.1.13 |
bcmDebugDataScopeCreates a running display of hexadecimal values over a period measured in
milliseconds for a given SAP.
Range of Values: 1-2 for DI600 (port)
1-6 for CX900 (slot)
1-8 for CX950 (slot)
Warning: You should not modify this object without advice of Memotec
personnel.rw INTEGER ( 1 .. 8 ) .1.3.6.1.4.1.495.2.1.6.48.55.1.14 |
bcmDebugDisconnectSends a DISConnect message to a given BCM Upper SAP.
Range of Values: 1-20 for BRI ISDN
1-64 for PRI ISDN
Warning: You should not modify this object without advice of Memotec
personnel.rw INTEGER ( 1 .. 64 ) .1.3.6.1.4.1.495.2.1.6.48.55.1.15 |