CXV34-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
18
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
IMPORTSDescribes a table that contains configuration information about each V34
modem and its associated hardware port. SEQUENCE OF V34SlotEntry .1.3.6.1.4.1.495.2.1.6.42.1 |
v34SlotEntryDescribes the configuration information applied to a specific V34 modem
and its associated hardware port. V34SlotEntry .v34SlotTable.1 |
v34SlotNumberIdentifies a numerical value applied to the modem. Each device has a
unique number.ro SapIndex .v34SlotTable.1.1 |
v34SlotAliasAssigns a name used for the alias. Each modem requires a unique name. You
may not assign the same name twice.
Default Value: none
Range of Values: Up to twelve alphanumeric characters, the first character
must be alphabetic.
Configuration Changed: operativerw Alias .v34SlotTable.1.2 |
v34SlotRowStatusDetermines the status of the objects in in a table row.
Default Value: none
Options:
invalid (1): row is flagged, after next reset the values will be disabled
and the row will be deleted from the table.
valid (2): values are enabled
Configuration Changed: administrativerw Enumeration .v34SlotTable.1.3 |
v34SlotStatusIdentifies the presence or absence of a V.34 modem in the slot and if
present, whether it has failed initialization.
Default Value: none
Options:
v34-not-present (1)
v34-present (2)
v34-present-failed (3)ro Enumeration .v34SlotTable.1.4 |
v34SlotModemStringDetermines a string to be sent to the modem upon initialization.
Default Value: none
Range of Values: 0-32 alphanumberic characters
Configuration Changed: administrativerw DisplayString .v34SlotTable.1.5 |
v34SlotDialNumberSpecifies the number used to dial the remote modem.
Default Value: none
Range of Values: An octet string of 12 numeric characters
Configuration Changed: administrativerw DisplayString .v34SlotTable.1.6 |
v34SlotAnswerModeDetermines whether the device will answer an incoming call.
Default Value: answer-enabled (2)
Options:
answer-disabled (1)
answer-enabled (2)
test-mode (3)
Configuration Changed: operativerw Enumeration .v34SlotTable.1.7 |
v34SlotSpeedStatusIdentifies the connection rate operative during the current dial call
only.
Default Value: none
Options:
speed-0-300 (1)
speed-600 (2)
speed-1200 (3)
speed-2400 (4)
speed-4800 (5)
speed-7200 (6)
speed-9600 (7)
speed-12000 (8)
speed-14400 (9)
speed-16800 (10)
speed-19200 (11)
speed-21600 (12)
speed-24000 (13)
speed-26400 (14)
speed-28800 (15)ro Enumeration .v34SlotTable.1.8 |
v34SlotRetrainStatusIdentifies whether the modem is retraining or not. It is only applicable
while the modem is on-line.
Default Value: none
Options:
no-retraining (1)
retraining (2)ro Enumeration .v34SlotTable.1.9 |
v34SlotHookStatusIdentifies whether the modem is 'off-hook' (connected to the telephone
line), or 'on-hook' (disconnected).
Default Value: none
Options:
on-hook (1)
off-hook (2)ro Enumeration .v34SlotTable.1.10 |
v34SlotRingStatusIdentifies when the modem detects a ring signal from the telephone line.
Default Value: none
Options:
no-ring (1)
ring (2)ro Enumeration .v34SlotTable.1.11 |
v34SlotDsrStatusIdentifies the data transfer state of the modem by the status of the Data
Set Ready (DSR) signal .
Default Value: none
Options
dsr-deasserted (1): data transfer inactive
dsr-asserted (2): data transfer activero Enumeration .v34SlotTable.1.12 |
v34SlotDtrStatusIdentifies the status of the Data Terminal Ready (DTR) signal that the
motherboard uses to dial the pre-stored phone number (if in originate
mode) or to enable auto answer (if in answer mode).
Default Value: none
Options:
dtr-deasserted (1)
dtr-asserted (2)ro Enumeration .v34SlotTable.1.13 |
v34SlotModelIdentifies the model number of the Printed Circuit Board (PCB) as an
integer value from 0 to 7.
Default Value: none
Range of Values: 0-7ro INTEGER .v34SlotTable.1.14 |
v34SlotRevisionIdentifies the revision number of the PCB as an integer value from 0 to
15.
Default Value: none
Range of Values: 0-15ro INTEGER .v34SlotTable.1.15 |
v34SlotEcoIdentifies the Engineering Change Order (ECO) level of the PCB as an
integer value from 0 to 15.
Default Value: none
Range of Values: 0-15ro INTEGER .v34SlotTable.1.16 |