CXTRDIo-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXTRDIo-MIB.
22
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
RFC1155-SMIProvides configuration information for each Token Ring service access
point and its associated hardware port.
Each row of the table (entry) contains information that corresponds to a
particular service access point. SEQUENCE OF TrdSapOprEntry .1.3.6.1.4.1.495.2.1.6.51.1 |
trdSapAdmTableProvides configuration information for each Token Ring service access
point and its associated hardware port.
Each row (entry) of the table corresponds to a particular service access
point. SEQUENCE OF TrdSapAdmEntry .1.3.6.1.4.1.495.2.1.6.51.2 |
trdSapAdmEntryProvides configuration information for a particular Token Ring service
access point and its associated hardware port. TrdSapAdmEntry .1.3.6.1.4.1.495.2.1.6.51.2.1 |
trdSapAdmNumberIdentifies the service access point by a number. The system assigns each
service access point a unique number.ro INTEGER .1.3.6.1.4.1.495.2.1.6.51.2.1.1 |
trdSapAdmAliasDetermines the textual name (alias) of this service access point. Each
service access point is assigned a unique name.
Range of Values: 0-16 alphanumeric characters.The first
character must be a letter, and spaces are not allowed.rw Alias .1.3.6.1.4.1.495.2.1.6.51.2.1.2 |
trdSapAdmPortSpeedDefines the input and output speed, in bits per second, for the
associated hardware port.
Options:
speed-4-mbps (1): 4 mbps ring speed
speed-16-mbps (2): 16 mbps ring speed
Default Value: speed-16-mbps (2)rw Enumeration .1.3.6.1.4.1.495.2.1.6.51.2.1.3 |
trdSapAdmTxBufferQueueDefines the transmit queue length, in number of buffers, for the
associated hardware port. The number of buffers is usually equal to the
number of frames (i.e. one frame per buffer).
After the queue has reached this length, up to eight additional frames are
stored before data is discarded.
Range of Values: 32-240
Default Value: 64rw INTEGER .1.3.6.1.4.1.495.2.1.6.51.2.1.4 |
trdSapAdmRxBufferQueueDefines the receive queue length, in number of buffers, for the associated
hardware port. The number of buffers is usually equal to the
number of frames (i.e. one frame per buffer).
After the queue has reached this length, data is discarded.
Range of Values: 32-240
Default Value: 64rw INTEGER .1.3.6.1.4.1.495.2.1.6.51.2.1.5 |
trdSapAdmDataGeneratorDetermines whether the Data Generator is enabled. The Data Generator is
used for testing purposes.
Options:
disabled (1)
enabled (2)
enabled-verify (3): The Data Generator is enabled, and checks data it
receives against data it has sent. The result of the test is displayed in
trdStatOprRxGenErrors.
Default Value: disabled (1)
Configuration Changed: administrative
Further Action: to activate changed
value, click on Action in EMS menu
bar, then click on Reset with Save.rw Enumeration .1.3.6.1.4.1.495.2.1.6.51.2.1.8 |
trdSapAdmGenFramesDetermines the number of times a frame will be generated for testing
purposes. Frames are generated every 50 msec. If the value is set to zero,
then frames will be generated continuously (every 50 msec).
If the Data Generator is disabled (using trdSapAdmDataGenerator), then the
value is ignored.
Range of Values: 0 - 255
Default Value: 1
Configuration Changed: administrative
Further action: to activate changed
value, click on Action in EMS menu
bar, then click on Reset with Save.rw INTEGER .1.3.6.1.4.1.495.2.1.6.51.2.1.9 |
trdSapAdmGenFrameSizeDetermines the size of the frames (in bytes) to be generated for testing
purposes. If the Data Generator is disabled, then this value is ignored.
Range of Values: 18 - 2100 bytes
Default Value: 512 bytes
Configuration Changed: administrative
Further action: to activate changed
value, click on Action in EMS menu
bar, then click on Reset with Save.rw INTEGER .1.3.6.1.4.1.495.2.1.6.51.2.1.10 |
trdSapOprEntryProvides the configuration of a particular Token Ring service access
point and its associated hardware port. TrdSapOprEntry .trdSapOprTable.1 |
trdSapOprNumberIdentifies the service access point by a numerical value. Each service
access point is assigned a unique number. The number is assigned by the
system.ro INTEGER .trdSapOprTable.1.1 |
trdSapOprAliasIdentifies the textual name (Alias) of this service access point. Each
service access point must have a unique name.
Range of Values:
0-16 alphanumeric characters. (Note that the first
character must be a letter and spaces are not allowed).
Default Value: Nonero Alias .trdSapOprTable.1.2 |
trdSapOprPortSpeedDefines the input and output speed, in bits per second, for the
associated hardware port.
Default Value: speed-16-mbps (2)
Range of Values:
speed-4-mbps (1)
speed-16-mbps (2)ro Enumeration .trdSapOprTable.1.3 |
trdSapOprTxBufferQueueDefines the transmit queue length, in number of buffers, for the
associated hardware port. The number of buffers is usually equal to the
number of frames (i.e. one frame per buffer).
After the queue has reached this length, up to eight additional frames are
stored before data is discarded.
Default Value: 64ro INTEGER .trdSapOprTable.1.4 |
trdSapOprRxBufferQueueDefines the receive queue length, in number of buffers, for the associated
hardware port. The number of buffers is usually equal to the
number of frames (i.e. one frame per buffer).
After the queue has reached this length, data is discarded.
Default Value: 64ro INTEGER .trdSapOprTable.1.5 |
trdSapOprDataGeneratorDetermines whether the Data Generator is enabled. The Data Generator is
used for testing purposes.
Options:
disabled (1): The Data Generator is disabled.
enabled (2): The Data Generator is enabled.
enabled-verify (3): The Data Generator is enabled, and checks data it
receives against data it has sent. The result of the test is displayed in
trdStatOprRxGenErrors.
retrigger (4): The Data Generator repeats the transmission, as specified
in trdSapOprGenFrames and trdSapOprGen.
Default Value: disabled
Configuration Changed: operative
The change cannot be saved.rw Enumeration .trdSapOprTable.1.8 |
trdSapOprGenFramesDetermines the number of times a frame will be generated (for testing
purposes). Frames are generated every 50 msec. If the value is set to
zero, then frames will be generated continuously (every 50 msec).
If the Data Generator is disabled (using trdSapOprDataGenerator), then the
value is ignored.
Range of Values: 0 - 255
Default Value: 1
Configuration Changed: operative
The change cannot be saved.rw INTEGER .trdSapOprTable.1.9 |
trdSapOprGenFrameSizeDetermines the size of the frames (in bytes) to be generated for testing
purposes. If the Data Generator is disabled, then this value is ignored.
Range of Values: 18-2100 bytes
Default Value: 512 bytes
Configuration Changed: operative
The change cannot be saved.rw INTEGER .trdSapOprTable.1.10 |
trdOprControlStatsDetermines whether statistics for the hardware port will be cleared. When
the clearSapStats option is selected, all counters for this port are
cleared, including counters kept in the Interfaces Group MIB, (RFC 1213)
and in the dot5 Table (RFC 1231).
Options:
clearSapStats (1): clears all statistics for the hardware port.
Configuration Changed: operativerw Enumeration .trdSapOprTable.1.15 |
trdStatOprRxGenErrorsIdentifies the total number of frames received that contain errors for a
port that is set to enable-verify in 'trdSapOprDataGenerator'.
Range of Values: 0 to 4,294,967,295
Default Value: Nonero Counter .trdSapOprTable.1.17 |