CXT1E1-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
10
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
10 total| Object Name |
|---|
IMPORTSThe T1/E1 configuration table. SEQUENCE OF T1e1CfgEntry .1.3.6.1.4.1.495.2.1.8.2.10 |
t1e1CfgEntryAn entry in the T1/E1 configuration table. T1e1CfgEntry .t1e1CfgTable.1 |
t1e1CfgLinkIndexIdentifies the physical port with the T1/E1 (t1e1) interface.
Range of Values: 1 - 2
Default Value: None
Configuration Changed: administrativero INTEGER .t1e1CfgTable.1.1 |
t1e1CfgDebounceSpecifies the number of loops needed for debouncing.
Warning: This is a Private Mode activity that should only be
performed by or under the direct supervision of qualified
personnel.
Range of Values: 1 - 255
Default Value: 2
Configuration Changed: administrativerw INTEGER .t1e1CfgTable.1.10 |
t1e1CfgJitterAttenuatorDefines the position and buffer depth of the Jitter Attenuator
when the Attenuator is enabled.
Warning: This is a Private Mode activity that should only be
performed by or under the direct supervision of qualified
personnel.
Options:
t1e1NoJitterAttenuator (1)
t1e1RxAttenuator32Bits (2)
t1e1RxAttenuator128Bits (3)
t1e1TxAttenuator32Bits (4)
t1e1TxAttenuator128Bits (5)
Default Value: t1e1NoJitterAttenuator (1)
Configuration Changed: administrativerw Enumeration .t1e1CfgTable.1.11 |
t1e1CfgSyncCriteriaDetermines the criteria used for Synchronisation.
Options:
In D4 framing mode, 1 = search for Ft pattern, the search
for Fs pattern and 2=cross couple Ft and Fs pattern.
In ESF framing mode, 1 = search for FPS pattern only.
In ESF framing mode, 2 = search for FPS and verify with CRC6.
Warning: This is a Private Mode activity that should only be
performed by or under the direct supervision of qualified
personnel.
Default Value: 1
Configuration Changed: administrativerw INTEGER .t1e1CfgTable.1.12 |
t1e1CfgT1RxEqualizerGainLimitProgram the receiver sensitivity.
Warning: This is a Private Mode activity that should only be
performed by or under the direct supervision of qualified
personnel.
Options:
t1e1EGLLow (1): Program a low sensitivity of -30 dB. This is
recommended for most applications.
t1e1EGLHigh (2): Program a high sensitivity of -36 dB. This
setting could be required for particular applications, however,
with this level of sensitivity the receiver will be more
susceptible to crosstalk and the receiver's jitter tolerance
will suffer.
Default Value: t1e1EGLLow (1)
Configuration Changed: administrativerw Enumeration .t1e1CfgTable.1.13 |
t1e1CfgT1RxLevelIndicates in real-time a range of received signal levels.
Options:
1: +2.0 to -7.5 dB
2: -7.5 to -15.0 dB
3: -15.0 to -22.5 dB
4: less than -22.5 dBro INTEGER .t1e1CfgTable.1.50 |
t1e1CfgT1FrameAlignmentChangeIndicates the most recent time at which a resynchronization resulted in a
change of frame or multiframe alignment. If no such event has occurred
since system startup, then the value will be zero.ro TimeTicks (SNMPv2-SMI) .t1e1CfgTable.1.51 |
t1e1CfgT1JitterAttenuatorTripIndicates the most recent time that the jitter attenuator FIFO
reached within 4-bits of it's limit on this line interface. If
no such event has occurred since system startup, then the value
will be zero.ro TimeTicks (SNMPv2-SMI) .t1e1CfgTable.1.52 |