CXST-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
23
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
stEntryThe entry index in the ISDN S/T Interface Transceiver Driver table. StEntry .1.3.6.1.4.1.179.2.2.1.1.1 |
stSlotNumberIndexIndicates the physical slot number of the I/O card in the CX900/CX900 PRO.
Range of Values: 1-6 for CX900, 1-8 for CX900 PRO
Default Value: nonero INTEGER .1.3.6.1.4.1.179.2.2.1.1.1.1 |
stRowStatusDetermines whether this entry is to be removed from service
(i.e. invalidated) within the ST Driver.
Options:
invalid (1): row is flagged; after next reset values will be disabled and row
will be deleted from table
valid (2): values are enabled
Default Value: valid
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.2 |
stPS1DetectionIndicates whether or not the driver has to wait for the detection
of the Power Source 1 before generating an activation request at
system power-up.
Options:
disabled (1): Power source 1 detection is not performed.
enabled (2): Power source 1 detection is performed.
Default Value: disabled (1)rw Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.10 |
stTimer1Indicates the maximum duration (in seconds) allocated for ISDN
link synchronization at the NT interface as specified in the
I.430 standard.
Default Value: 15rw INTEGER .1.3.6.1.4.1.179.2.2.1.1.1.11 |
stTimer3Indicates the maximum duration (in seconds) allocated for ISDN
link synchronization at the TE interface as specified in the
I.430 standard.
Default Value: 10rw INTEGER .1.3.6.1.4.1.179.2.2.1.1.1.12 |
stTestIndicates if the driver needs to configure the S/T Interface in a test mode.
Options:
disabled (1): Test mode is disabled
internal2B1D (2): The B1, B2 and D channel data received from the CPU are sent back unchanged.
internal2B (3): The B1 and B2 channel data received from the CPU are sent back unchanged.
external (4): An 'analog' loopback is performed if the transmit pair is shorted to the received pair.
stLpbk (5): The B1 and B2 channel data received from the line interface are sent back unchanged.
testSignal (6): The device transmits a 96 kHz square wave test signal on the line interface.
Default Value: disabled (1)rw Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.13 |
stPortStatusIndicates the status of the port on this I/O card.
Options:
portDown (1): port is down
portUp (2): port is up
Default Value: nonero Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.20 |
stRxInfoStateIndicates the signal that is received across the S/T reference point
according to I.430 standard, table 4.
Options:
info0: INFO0 signal received from the TE or the NT
info1: INFO1 signal received from the TE
info2: INFO2 signal received from the NT
info3: INFO3 signal received from the TE
info4: INFO4 signal received from the NT
infoX: INFOX signal received from the TE or the NT
Default Value: nonero Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.21 |
stTxInfoStateIndicates the signal that is transmitted across the S/T reference point
according to I.430 standard, table 4.
Options:
info0: INFO0 signal transmitted to the TE or the NT
info1: INFO1 signal transmitted to the NT
info2: INFO2 signal transmitted to the TE
info3: INFO3 signal transmitted to the NT
info4: INFO4 signal transmitted to the TE
infoX: INFOX signal transmitted to the TE or the NT
Default Value: nonero Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.22 |
stErrorIndicatorIndicates if an error condition has been detected by the
activation state machine. Error conditions:
- lost of framing element;
- invalid info received.
Options:
errorDetected (1): an error condition has occurred.
noError (2): no error condition has occurred.
Default Value: nonero Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.23 |
stFrameSyncIndicates if the frame synchronization is achieved
Options:
noSync (1): frame synchronization is not achieved
Sync (2): frame synchronization is achieved
Default Value: nonero Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.24 |
stPortModeIndicates in which mode the ST port is functioning.
Options:
te (1): Terminal Endpoint, port is in user mode
nt (2): Network Termination, port is in network mode.
Default Value: nonero Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.25 |
stActivationIndicates the number of activation requests received by this I/O card.
Range of Values: 0-4294967295
Default Value: nonero Counter .1.3.6.1.4.1.179.2.2.1.1.1.40 |
stDeactivationIndicates the number of deactivation requests received by this I/O card.
Range of Values: 0-4294967295
Default Value: nonero Counter .1.3.6.1.4.1.179.2.2.1.1.1.41 |
stTransitionIndicates the number of down-to-up or up-to-down transitions that have
occurred on this I/O card.
Range of Values: 0-4294967295
Default Value: nonero Counter .1.3.6.1.4.1.179.2.2.1.1.1.42 |
stNbErrorsIndicates the number of times the transceiver has indicated that
an error condition has been detected by the activation state
machine as outlined in CCITT I.430, ETSI ETS 300012 and
ANSI T1.605 standards.
Range of Values: 0-4294967295
Default Value: nonero Counter .1.3.6.1.4.1.179.2.2.1.1.1.43 |
stFrameSyncLostIndicates the number of times the transceiver has lost it's
frame synchronization.
Range of Values: 0-4294967295
Default Value: nonero Counter .1.3.6.1.4.1.179.2.2.1.1.1.44 |
stMissingAMIViolationIndicates the number of frames not containing the right number of
AMI violations.
Range of Values: 0-255
Default Value: nonero INTEGER .1.3.6.1.4.1.179.2.2.1.1.1.45 |
stUnbalancedFrameIndicates the number of unbalanced frames.
Range of Values: 0-255
Default Value: nonero INTEGER .1.3.6.1.4.1.179.2.2.1.1.1.46 |
stClearStatClears all S/T driver statistic counters for this I/O card.
Options:
clearStats : clears statistics
Default value: nonerw INTEGER .1.3.6.1.4.1.179.2.2.1.1.1.60 |
stPortCtrlEither brings up/down the port on this I/O card or reset it.
Options:
portDown (1): bring port down
portUp (2): bring port up
portReset (3): port is reset and configuration is saved
openBChannels (4): both B channels are opened (for test purpose only).
Default Value: nonerw Enumeration .1.3.6.1.4.1.179.2.2.1.1.1.61 |
RFC1155-SMIA table containing configuration parameters, controls, status and statistics
for the S/T Interface Transceiver Driver. SEQUENCE OF StEntry .1.3.6.1.4.1.495.2.1.6.60.10 |