CXPortManager-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXPortManager-MIB.
7
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
7 total| Object Name |
|---|
IMPORTSA table that defines planned port configuration. SEQUENCE OF CxPrtMPlannedCfgEntry .1.3.6.1.4.1.495.2.1.5.16.1 |
cxPrtMAdminTableA table that controls ports. SEQUENCE OF CxPrtMAdminEntry .1.3.6.1.4.1.495.2.1.5.16.2 |
cxPrtMAdminEntryThe index of the table is a port number which is in either the IF table
or the planned CFG table. CxPrtMAdminEntry .1.3.6.1.4.1.495.2.1.5.16.2.1 |
cxPrtMAdminPortControlDetermines the state of the administrative configuration associated
with the port.
The setting of this object is dynamic. The port immediately implements
the option you enter.
Options:
activate (1): activates the administrative
configuration for a port which does not have
any configuration.
deactivate (2): puts a running port into a no
configuration state.
reintialize (3): activates a new administrative
configuration for a port currently running an
operative configuration.
Default Value: none
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.5.16.2.1.1 |
cxPrtMPlannedCfgEntry CxPrtMPlannedCfgEntry .cxPrtMPlannedCfgTable.1 |
cxPrtMPrtNumDisplays the port number.
You cannot modify this object. It is a display
that the software provides.
Options:
- CX900: 11, 21, 31, 41, 51, 61 or 71. The first digit identifies the
slot number the I/O board resides in, the second digit identifies
the port number on the I/O board.
- CX1000: a single digit from 1 to 4. The port numbers available vary
depending on the type of module. For example, the LAN module supports
only one port per I/O board and the Voice module supports only two
ports per I/O board, but the Frame Relay module supports 4 ports per
I/O board. You distinguish between module port numbers by
specifying the slot number of the I/O board using a different object.
Default Value: nonero INTEGER .cxPrtMPlannedCfgTable.1.1 |
cxPrtMPrtTypeDetermines the data link layer type for the port.
The setting of this object is dynamic. The port immediately implements
the setting that you enter.
Options:
other (1): removes the link layer configuration for the associated port
ethernet (6)
token_ring (9)
lapb (16)
sdlc (17)
T1 (18)
E1 (19)
basic_isdn (20)
async (22)
frame_relay (32)
bop (33)
bisync (83)
voice (100)
Default Value: none
Configuration Changed: operativerw INTEGER .cxPrtMPlannedCfgTable.1.2 |