CXLlcLanConv-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXLlcLanConv-MIB.
18
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
RFC1155-SMIA table containing configuration information about each LLC-2 LAN Service
Access Point. SEQUENCE OF LlcLanSapEntry .1.3.6.1.4.1.495.2.1.6.47.10 |
cxLlcLanConvMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.47.20 |
llcLanSapEntryThe parameters for a particular LLC-2 LAN Service Access Point. LlcLanSapEntry .llcLanSapTable.1 |
llcLanSapNumberIdentifies the Service Access Point by a numerical value. Values are
unique per Service Access Point.ro SapIndex .llcLanSapTable.1.1 |
llcLanSapRowStatusIndicates whether the particular Service Access Point is configured
within the MIB. Service Access Point entries (rows) may be created by
setting this object value to 'valid', or deleted by changing this object
value to 'invalid'. Whether or not the row actually disappears is left to
the implementation so this object may actually read as 'invalid' for some
arbitrary length of time.rw Enumeration .llcLanSapTable.1.2 |
llcLanSapAliasIdentifies the Service Access Point by a textual name. Names are unique
per Service Access Point.rw Alias .llcLanSapTable.1.3 |
llcLanSapCompanionAliasIdentifies the LAN Service Access Point which provides LAN services for
this LLC-2 LAN SAP. Different LLC-2 SAPs may use the same Companion Alias
provided that they use a different llcLanSapRemoteAddress or
llcLanSapSrcLlcSap/ llcLanSapDstLlcSap pair.rw Alias .llcLanSapTable.1.4 |
llcLanSapRemoteAddressThis object specifies the MAC address of the remote LAN station to which
the LLC-2 LAN connection will be established.rw MacAddress (SNMPv2-TC) .llcLanSapTable.1.5 |
llcLanSapSrcLlcSapIdentifies the source LLC-2 SAP address associated with the connection.
Only even values are allowed.rw INTEGER .llcLanSapTable.1.6 |
llcLanSapDstLlcSapIdentifies the destination LLC SAP address associated with the
connection. Only even values are allowed.rw INTEGER .llcLanSapTable.1.7 |
llcLanSapControlControl associated with the specified service access point. When set to
'clearStats, statistics counters are reset to zero.rw Enumeration .llcLanSapTable.1.8 |
llcLanSapStateIndicates the current SAP state. This object is a bit map
which represents the different SAP status:
Type of Status llcLanSapState Object Value
Hex Decimal
SAP Offline 0x01 001
SAP Unbound from LAPBD 0x02 002
SAP Bound from LAPBD 0x04 004
SAP Connected from LAPBD 0x08 008
SAP Binding to LAN Driver 0x40 064
SAP Bound to LAN Driver 0x80 128
In data transfer mode, the value of this object should be:
128 + 8 + 4 = 140
The SAP is 'offLine' if it is not configured at the layer
(i.e. just added to the configuration).ro INTEGER .llcLanSapTable.1.9 |
llcLanSapTxFramesIndicates the number of frames sent from this Service Access Point.ro Counter .llcLanSapTable.1.10 |
llcLanSapRxFramesIndicates the number of frames received at this Service Access Point.ro Counter .llcLanSapTable.1.11 |
llcLanSapTxOctetsIndicates the number of octets sent from this Service Access Point.ro Counter .llcLanSapTable.1.12 |
llcLanSapRxOctetsIndicates the number of octets received at this Service Access Point.ro Counter .llcLanSapTable.1.13 |
llcLanSapLocalAddressThis object specifies the (Virtual/Real) MAC address of the local LAN port to which
the LLC-2 layer will bind. LLC-2 will send the value of this object as Virtual
MAC Address to LAN driver in the BindReq message ONLY if it is NOT 0x00000000. The final
value of this object will be the MAC address provided by lower local LAN driver in
BindConfirm message.
Default value: 0x0000000000000000.rw MacAddress (SNMPv2-TC) .llcLanSapTable.1.19 |
llcLanSapPhysicalInterfaceIdentifies the type of physical interface that this Service Access Point uses.
Options
ethernet (1)
tokenring (2)rw Enumeration .llcLanSapTable.1.20 |