CXLlcFrConv-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
33
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
RFC1155-SMIDetermines the number of seconds between route connection attempts by the
LLC-2 Frame Relay Convergence layer.
Range of Values: 10 - 900 seconds
Default Value: 30 seconds
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.33.1 |
llcfrcnvMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.33.2 |
llcfrcnvSapTableThis table contains configuration information for each LLC-2 Frame Relay
Convergence layer SAP (service access point). SEQUENCE OF LlcfrcnvSapEntry .1.3.6.1.4.1.495.2.1.6.33.10 |
llcfrcnvSapEntryDefines a row in the llcfrcnvSapTable. Each row contains the objects
which define a service access point. LlcfrcnvSapEntry .1.3.6.1.4.1.495.2.1.6.33.10.1 |
llcfrcnvSapNumberIdentifies this SAP (service access point) with a numerical value which
must be unique for each LLC-2 Frame Relay Convergence SAP. Value 0 is
allocated to the Public SAP (PSAP) used to interface with the FRIM module
via IAM. The row associated with value 0 always exists and cannot be
deleted. All other SAPs are used to communicate with other higher layer
protocols.ro INTEGER .1.3.6.1.4.1.495.2.1.6.33.10.1.1 |
llcfrcnvSapRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): Row is flagged, after next reset the values will be disabled
and the row is deleted from the table
valid (2): Values are enabled
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.33.10.1.2 |
llcfrcnvSapAliasIdentifies this service access point by a textual name. Names must be
unique across all service access points at all layers.
Range of Values: 1 -16 alphanumeric characters (first character must be a
letter)
Default Value: none
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.33.10.1.3 |
llcfrcnvSapSrcLlcSapDetermines the source LLC-2 SAP address associated with this connection.
Only even values are allowed (usually assigned as a multiple of 04
hexadecimal). This SAP address should not be confused with the internal
SAP numbers used by the LLC-2 layer.
Range of Values: 2 - 254 (even values only)
Default Value: 4
Configuration Changed: administrative and operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.33.10.1.4 |
llcfrcnvSapDstLlcSapDetermines the destination LLC-2 SAP address associated with this
connection. Only even values are allowed (usually assigned as a multiple
of 04 hexadecimal). This SAP address should not be confused with the
internal SAP numbers used by the LLC-2 layer.
Range of Values: 2 - 254 (even values only)
Default Value: 4
Configuration Changed: administrative
and operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.33.10.1.5 |
llcfrcnvSapRouteIndexDetermines the route associated with this SAP (service access point). The
value of this object is the llcfrcnvSRIndex which identifies the route in
the llcfrcnvSysRouteTable. Multiple SAP entries may use the same system
route provided that they have a different
llcfrcnvSapSrcLlcSap-llcfrcnvSapDstLlcSap pair.
Range of Values: 0 - 64
Note:
A value of 0 indicates no route is selected.
Default Value: none
Related Objects:
llcfrcnvSRIndex
llcfrcnvSapSrcLlcSap
llcfrcnvSapDstLlcSap
Configuration Changed: administrative and operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.33.10.1.6 |
llcfrcnvSapControlClears all objects that contain statistics for this service access point.
Options:
clearStats (1)
Configuration Changed: administrative and operativerw Enumeration .1.3.6.1.4.1.495.2.1.6.33.10.1.7 |
llcfrcnvSapStateIndicates the status of the SAP (service access point).
Options:
offLine (1): Indicates that the SAP is not configured.
unbound (2): Indicates that this SAP is not bound to its companion SAP.
bound (3): Indicates that this SAP is bound to its companion SAP.
connected (4):.Indicates that this SAP is bound and is available for data
transfer.ro Enumeration .1.3.6.1.4.1.495.2.1.6.33.10.1.8 |
llcfrcnvSapTxFramesIndicates the number of frames transmitted by this service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.33.10.1.9 |
llcfrcnvSapRxFramesIndicates the number of frames received by this service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.33.10.1.10 |
llcfrcnvSapTxOctetsIndicates the number of octets transmitted by this service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.33.10.1.11 |
llcfrcnvSapRxOctetsIndicates the number of octets received by this service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.33.10.1.12 |
llcfrcnvSapUnopenedServiceDiscardsIndicates the number of frames received and discarded by this service
access point because there was no associated connection.ro Counter .1.3.6.1.4.1.495.2.1.6.33.10.1.13 |
llcfrcnvSapTxResetsIndicates the number of connection reset requests issued from this
service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.33.10.1.14 |
llcfrcnvSapRxResetsIndicates the number of connection reset requests/indications received by
this service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.33.10.1.15 |
llcfrcnvSapHostMacAddrThis object specifies the MAC address of the host station to which
the FR LLC-2 connection will be established - Used only for SNA BAN Transport.
If this object is configured, then it is automatically assumed that BAN will be
the SNA transport used. Otherwise, the SNA transport is BNN.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.33.10.1.16 |
llcfrcnvSapCntrMacAddrThis object specifies the MAC address of the work station which
will be connected to the host - Used only for SNA BAN Transport.
If this object is configured, then it is automatically assumed that BAN will be
the SNA transport used. Otherwise, the SNA transport is BNN.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.33.10.1.17 |
llcfrcnvSysRouteTableThis table contains information about each LLC-2 FR Convergence system
route. SEQUENCE OF LlcfrcnvSysRouteEntry .1.3.6.1.4.1.495.2.1.6.33.11 |
llcfrcnvSysRouteEntryDefines a row in the llcfrcnvSysRouteTable. Each row contains the objects
which define an LLC-2 FR Convergence system route. LlcfrcnvSysRouteEntry .1.3.6.1.4.1.495.2.1.6.33.11.1 |
llcfrcnvSRIndexA number that uniquely identifies each LLC-2 Frame Relay Convergence
Route.
Related Objects:
llcfrcnvSapRouteIndex
Range of Values: 0 - 64ro INTEGER .1.3.6.1.4.1.495.2.1.6.33.11.1.1 |
llcfrcnvSRRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): Row is flagged, after next reset the values will be disabled
and the row is deleted from the table
valid (2): Values are enabled
Default Value: none
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.33.11.1.2 |
llcfrcnvSRDestAliasIdentifies the textual name of the destination service this route
connects to. The destination alias is the name of the Frame Relay layer
outlet circuit (frpCircuitAlias).
Range of Values: 1 -16 alphanumeric characters (first character must be a
letter)
Default Value: none
Configuration Changed: administrative and operativerw Alias .1.3.6.1.4.1.495.2.1.6.33.11.1.3 |
llcfrcnvSRControlPermits control of a specific SAP (service access point).
Options:
clearStats (1): Clear all statistics stored by statistics objects.
Configuration Changed: administrative and operativerw Enumeration .1.3.6.1.4.1.495.2.1.6.33.11.1.4 |
llcfrcnvSRPriorityDetermines the filtering/forwarding action and the forwarding priority
for data sent from the STP bridge.
Options:
discard (1): Do not forward the data.
forward (2): Forward the data.
priority-low (3): Forward with a low priority (Frame Relay only).
priority-high (4): Forward with a high priority (Frame Relay only).
Default Value: forward (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.33.11.1.5 |
llcfrcnvSRSubRefSpecifies a reference number that uniquely identifies this route. This
number is used by the FRIM (Frame Relay Interface Module) to identify
routes using the same DLCI (enables PVC consolidation). This number must
be unique for all routes sharing the same DLCI.
Range of Values: 1 - 255 (when using PVC consolidation)
0 (when not using PVC consolidation)
Default Value: 0
Configuration Changed: administrative and operativerw SubRef .1.3.6.1.4.1.495.2.1.6.33.11.1.6 |
llcfrcnvSRRouteStatusIndicates the status of this route.
Options:
offLine (1): Indicates that the route is not configured.
notConnected (2): Indicates that the remote destination may not exist, or
has refused the connection.
inProgress (3): Indicates that the connection is in the process of being
established. This is a transient state.
connected (4): Indicates that the connection is established and is ready
for data transfer.ro Enumeration .1.3.6.1.4.1.495.2.1.6.33.11.1.10 |
llcfrcnvSRClearStatusIndicates the status of a failed connection. The value of this object is
only valid only between attempts to establish the route connection
(llcfrcnvSRRouteStatus = notConnected), and may or may not change after
successive failed attempts.
Options:
noFailure (1): Once a system route has been successfully connected, this
value is maintained for the duration of the connection.
internalError (2): An internal error has occurred.
remoteAllocFailure (3): There is insufficient memory available for FRIM to
establish this connection.
remoteNoAccess (4): The requested frame relay service does not exist.
remotePvcDown (5): The requested Frame Relay outlet circuit is down.
remotePvcBusy (6): The requested Frame
Relay outlet circuit is already
connected.
localFcnFailure (7): Flow control negotiation failed.
remoteFcnFailure (8): Flow control negotiation failed at the Frame Relay
layer.
remoteAliasNotFound (9): The destination service alias
(llcfrcnvSRDestAlias) does not exist.ro Enumeration .1.3.6.1.4.1.495.2.1.6.33.11.1.11 |
llcfrcnvSROutSuccessfullConnectsIndicates the number of successful connections originated for this route.
An outgoing connection is always attempted from LLC-2 Frame Relay
Convergence to FRIM.ro Counter .1.3.6.1.4.1.495.2.1.6.33.11.1.12 |
llcfrcnvSROutUnsuccessfullConnectsIndicates the number of unsuccessful connections originated for this
route. An outgoing connection is always attempted from LLC-2 Frame Relay
Convergence to FRIM.ro Counter .1.3.6.1.4.1.495.2.1.6.33.11.1.13 |