CXISDN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXISDN-MIB.
47
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
47 total| Object Name |
|---|
isdnL3SapStatusIndicationIndicates that an event specified in isdnL3SapStatusEvent has occurred. TRAP-TYPE .1.3.6.1.4.1.495.2.1.6.32.0.1 |
isdnCCSapStatusIndicationIndicates that an event specified in isdnCCSapStatusEvent has occurred. TRAP-TYPE .1.3.6.1.4.1.495.2.1.6.32.0.2 |
RFC1155-SMIIdentifies the main version and revision numbers (separated by a period)
of the ISDN software layer.
Default Value: nonero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.32.1 |
isdnTrapsIndicates whether this software layer produces the
isdnCCSapStatusIndication and isdnL3SapStatusIndication traps.
Options:
disabled(1): software layer does not produce CC and L3 status
indication traps
enabled (1): software layer produces CC and L3 status indication traps
Default Value: disabled
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.2 |
isdnL3SapTableA table containing configuration, controls, status and statistics
information about each ISDN layer lower service access point. SEQUENCE OF IsdnL3SapEntry .1.3.6.1.4.1.495.2.1.6.32.20 |
isdnL3SapEntryThe parameters for a specific lower service access point. IsdnL3SapEntry .1.3.6.1.4.1.495.2.1.6.32.20.1 |
isdnL3SapNumberIndicates the row containing objects for configuring (or monitoring) a
SAP that is associated with another SAP in the LAPD software layers.
Note: The SAP number has to be the same than the Digital Subscriber Line
number used in the BCM software layer.
Range of Values: 1-6
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.32.20.1.1 |
isdnL3SapRowStatusDetermines whether this SAP is to be removed from service (i.e.
invalidated) within the ISDN software layer.
Options:
invalid (1): row is flagged; after next reset values will be
disabled and row will be deleted from table
valid (2): values are enabled
Default Value: none
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.20.1.2 |
isdnL3SapAliasDetermines the textual name identifying this lower SAP.
Range of Values: 0-16 alphanumeric characters beginning with a non-numeric
character
Default Value: none
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.32.20.1.3 |
isdnL3SapCompanionAliasDetermines the textual name identifying this SAPs companion SAP in the
LAPD software layer.
Range of Values: 0-16 alphanumeric characters beginning with a non-numeric
character
Default Value: none
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.32.20.1.4 |
isdnL3SapUserNetTypeDetermines the Basic Rate Interface emulation for this SAP.
Options:
user (1): BRI type is User
network (2): BRI type is Network (for future use)
Default Value: user
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.20.1.10 |
isdnL3SapT303TimerDetermines the interval in seconds that the ISDN software layer will wait
for an Alerting, Connect, Setup Acknowledge, Call Proceeding, or Release
Complete message after sending a Setup message.
Range of Values: 0-255
Default Value: 4
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.20.1.11 |
isdnL3SapT304TimerDetermines the interval in seconds that the ISDN software layer will wait
for a Call Proceeding, Alerting, Connect, or Disconnect message after
sending an Information message.
Range of Values: 0-255
Default Value: 15
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.20.1.12 |
isdnL3SapT305TimerDetermines the interval in seconds that the ISDN software layer will wait
for a Release or Disconnect message after sending a Disconnect message.
Range of Values: 0-255
Default Value: 30
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.20.1.13 |
isdnL3SapT308TimerDetermines the interval in seconds that the ISDN software layer will wait
for a Release or Release Complete message after sending a Release message.
Range of Values: 0-255
Default Value: 4
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.20.1.14 |
isdnL3SapT310TimerDetermines the interval in seconds that the ISDN software layer will wait
for an Alerting, Connect, Disconnect or Progress message after receiving a
Call Proceeding message.
Range of Values: 0-255
Default Value: 10
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.20.1.15 |
isdnL3SapT313TimerDetermines the interval in seconds that the ISDN software layer will wait
for a Connect Acknowledge message after sending a Connect message.
Range of Values: 0-255
Default Value: 4
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.20.1.16 |
isdnL3SapT318TimerDetermines the interval in seconds that the ISDN software layer will wait
for a Resume Acknowledge or Resume Reject message after sending a Resume
message.
Range of Values: 0-255
Default Value: 4
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.20.1.17 |
isdnL3SapT319TimerDetermines the interval in seconds that the ISDN software layer will wait
for a Suspend Acknowledge or Suspend Reject message after sending a
Suspend message.
Range of Values: 0-255
Default Value: 4
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.20.1.18 |
isdnL3SapDefTimerCfgDetermines whether isdnL3SapT303Timer, isdnL3SapT304Timer,
isdnL3SapT305Timer, isdnL3SapT308Timer, isdnL3SapT310Timer,
isdnL3SapT313Timer, isdnL3SapT318Timer and isdnL3SapT319Timer will revert
immediately to their default values if the value of this object has
previously permitted these values to be changed from their defaults.
Options:
noDefCfg (1): timer values can be or have been modified
DefCfg (2): timer value will maintain or return to their defaults
Default Value: DefCfg
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.20.1.19 |
isdnL3SapStatusEventIndicates a status generated by the isdnL3SapStatusIndication trap.
Note: This value will always read noEvent unless isdnTraps has been
enabled and an event has been trapped.
Options:
noEvent (1): no trapped event
badCfgVersion (2): configuration template not current
badDslID (3): wrong Digital Subscriber Line
dslInUse (4): Digital Subscriber Line in use
dslNotInUse (5): Digital Subscriber Line not available
noNLCB (6): network layer control block not available
nlcbInitErr (7): network layer control block initialization error
badSwitchType (8): incorrect switch-type configuration
nlcbPoolErr (9) no more network layer control blocks Default
Value: noEventro Enumeration .1.3.6.1.4.1.495.2.1.6.32.20.1.40 |
isdnL3SapDslTypeIndicates the type of physical interface for this SAP.
Options:
none (1): SAP has no interface
bri (2) SAP uses a Basic Rate Interface
pri (3) SAP uses a Primary Rate Interface
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.32.20.1.41 |
isdnL3SapBRITypeIndicates the BRI type for this SAP.
Options:
none (1): SAP has no BRI interface
u (2): BRI type is U
s-t (3): BRI type is S/T
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.32.20.1.42 |
isdnCCSapTableA table containing configuration information about each upper service
access point. SEQUENCE OF IsdnCCSapEntry .1.3.6.1.4.1.495.2.1.6.32.21 |
isdnCCSapEntryThe parameters for a specific upper service access point. IsdnCCSapEntry .1.3.6.1.4.1.495.2.1.6.32.21.1 |
isdnCCSapNumberIndicates the row containing objects for configuring (or monitoring) a
SAP that is associated with the corresponding SAP in the BCM software
layer.
Note: The SAP number has to be the same than the Digital Subscriber Line
number used in the BCM software layer.
Range of Values: 1-6
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.32.21.1.1 |
isdnCCSapRowStatusDetermines whether this SAP is to be removed from service (i.e.
invalidated) within the ISDN software layer.
Options:
invalid (1): row is flagged; after next reset values will be
disabled and row will be deleted from table
valid (2): values are enabled
Default Value: none
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.21.1.2 |
isdnCCSapAliasDetermines the textual name identifying this upper SAP.
Range of Values:0-16 alphanumeric characters beginning with a non-numeric
character
Default Value: none
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.32.21.1.3 |
isdnCCSapSwitchTypeDetermines the type of protocol supported by the switch providing the CX
900 with ISDN access.
Options:
unspecified (1): unspecified
bri-1TR6 (2): Germany / 1TR6
bri-5ESS (3): U.S.A / At&T 5ESS
bri-CCITT (4): CCITT Q.931
bri-DMS100 (5): U.S.A / Norther Telecom
bri-KDD (6): Japan / KDD
bri-NET3 (7): Europe / Net3
bri-NI1 (8): U.S.A / National ISDN 1
bri-NI2 (9): U.S.A / National ISDN 2
bri-NTT (10): Japan / NTT
bri-TS013 (11): Australia / TS013
bri-VN (12): France / VN
Default Value: bri-NI1
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.21.1.10 |
isdnCCSapInitTerminalDetermines the initializing characteristics of the ISDN software layer of
the CX 900.
Options:
nit (1): non-initializing terminal
fit (2) fully-initializing terminal (North American
Note: FIT requires terminal registration.
Default Value: nit
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.21.1.11 |
isdnCCSapDNRoutingDetermines whether incoming calls will be checked against End-Point ID
(EPID).
Options:
no (1): incoming call not checked against EPID
yes (2): incoming call checked against EPID
Note: Incoming call not containing EPID will be checked against Directory
Number (DN).
Default Value: no
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.21.1.12 |
isdnCCSapBearerRoutingDetermines whether incoming calls will be checked against the bearer-type
specified in isdnCCSapBearerType
Options:
no (1): incoming call not checked against bearer-type
yes (2): incoming call checked against bearer-type
Default Value: no
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.21.1.13 |
isdnCCSapBearerTypeDetermines the bearer-type that will be checked if isdnCCSapBearerType is
set to yes.
Options:
voice call (1): call is voice
circuit-sw-data-call (2): call is circuit- switched data
packet-sw-data-call (3): call is packet- switched data
Default Value: circuit-sw-data-call
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.32.21.1.14 |
isdnCCSapDirectoryNumberDetermines the address or calling number assigned to the subcriber
interface of the CX900.
Range of Values: 0-16 numeric characters (namely, 0123456789*#)
Default Value: none
Configuration Changed: administrativerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.32.21.1.15 |
isdnCCSapSPIDDetermines the Service Profile Identifier (SPID) for the subscriber
interface of the CX900. This object is meaningful only in North America.
SPIDs are required for DMS-100 and NI-1 switches but optional for 5ESS
switches.
Range of Values: 0-20
Default Value: none
Configuration Changed: administrativerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.32.21.1.16 |
isdnCCSapSubAddressDetermines the subaddress (DSS1) that can be used with object
isdnCCSapDirectoryNumber to specify an end-point user to be reached.
Range of Values: 0-20
Default Value: none
Configuration Changed: administrativerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.495.2.1.6.32.21.1.17 |
isdnCCSapT415TimerDetermines the interval in seconds that the ISDN software layer will wait
for completion of terminal initialization. If the Information and SPID
messages fail during this interval, they will be permitted only one
retransmission.
Range of Values: 0-255
Default Value: 20
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.32.21.1.18 |
isdnCCSapStatusEventIndicates a status generated by the isdnCCSapStatusIndication trap.
Note: This value will always read noEvent unless isdnTraps has been
enabled and an event has been trapped.
Options:
noEvent (1): no trapped event
badCfgVersion (2): configuration template not current
badDslID (3): wrong Digital Subscriber Line
badCes (4): bad connection end-point
badSwitchType (5): incorrect switch-type configuration
cbPollErr (6): call control block error
dslInUseErr (7): Digital Subscriber Line in use
dslNotCfgErr (8): Digital Subscriber Line not configured
dslNotInUse (9): Digital Subscriber Line not available
noHostCB (10): no host control block
noT415 (11): no T415 timer
Default Value: noEventro Enumeration .1.3.6.1.4.1.495.2.1.6.32.21.1.40 |
isdnCCSapInUseIndicates whether this upper SAP has been properly initialized and is now
in use.
Options:
no (1): SAP has not been initialized
yes (2): SAP is in use
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.32.21.1.41 |
isdnCCSapActiveCallsIndicates the current number of active calls at this SAP.
Range of Values: 0-2
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.32.21.1.42 |
isdnDebugTableA table containing control to access debugging information. SEQUENCE OF IsdnDebugEntry .1.3.6.1.4.1.495.2.1.6.32.22 |
isdnDebugEntryThe parameters for a specific structure debugging information. IsdnDebugEntry .1.3.6.1.4.1.495.2.1.6.32.22.1 |
isdnDebugNumberIndicates the row containing objects for creating diagnostic files for
this upper SAP.
Range of Values: 1-6
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.32.22.1.1 |
isdnDebugCCBCreates a file that includes the following Call Control Block
information:
- DSL = #XX
- CCB = #XX
- State = 0xXXXX
- CallType = 0xXXXX
- B-Chan = 0xXXXX
- Call-ID = 0xXXXX
- CallRef = 0xXXXX
- Ces = 0xXX
- Sapi = 0xXX
- MakePrivateMsg = 0xXX
- H cbIndex = 0xXXXX
- CallRefLen = 0xXXXX
- Cause = 0xXXXX
- Host-Specifier = 0xXXXX
- Host-ID = 0xXXXX
- SendClearConf = 0xXX
- Diagnostics = 0xXX
- CollectAddress = 0xXX
- Service = 0xXXXXrw INTEGER .1.3.6.1.4.1.495.2.1.6.32.22.1.10 |
isdnDebugHCBCreates a file that includes the following Host Control Block
information:
- DSL = #XX
- HCB = #XX
- Directory = XXXXXXXXXXXXXXXXXXXX
- SPID = XXXXXXXXXXXXXXXXXXXX
epid(0)
- epsf = 0xXX
- usid = 0xXXXX
- tid = 0xXXXX
epid[1]
- epsf = 0xXX
- usid = 0xXXXX
- tid = 0xXXXX
- Busy[0] = 0xXX,
- Busy[1] = 0xXX
- Terminal-state = 0xXX
- Timer-T415 = 0xXXXX
- Bearer-Routing = 0xXX
- Host-ID = 0xXXXX
- Ces = 0xXX
- Initializing-Terminal = 0xXXrw INTEGER .1.3.6.1.4.1.495.2.1.6.32.22.1.11 |
isdnDebugCCDslCreates a file that includes the following Call Control DSL information:
- DSL = #XX
- InUse = 0xXXXX
- ActiveCCBs = 0xXXXX
- Cause-Location = XXXXXX
- Cd-Numb-Plan = XXXXXX
- Cd-Numb-Type = XXXXXX
- Cd-Sub-Type = XXXXXX
- Cr-Numb-Plan = XXXXXX
- Cr-Numb-Type = XXXXXX
- Cr-Prest-Ind = XXXXXX
- Cr-Scrn-Ind = XXXXXX
- Cr-Sub-Type = XXXXXX
- Facility-Code = XXXXXX
- HL-Coding-Std = XXXXXX
- HL-Interpret = XXXXXX
- HL-Presentat = XXXXXX
- HL-Teleservice = XXXXXX
- L2-Prot = XXXXXX
- L3-Prot = XXXXXX
- Sig-Val = XXXXXX
- Status = XXXXXX
- Transmit-Attr = XXXXXX
- Xfer-Cap = XXXXXX
- Xfer-Mode = XXXXXX
- Xfer-Prot = XXXXXX
- Xfer-Rate = XXXXXX
- Prog-Coding = XXXXXX
- Prog-Loc = XXXXX
- Prog-desc = XXXXXX
- Ind-Val = XXXXXXrw INTEGER .1.3.6.1.4.1.495.2.1.6.32.22.1.12 |
isdnDebugNLCBCreates a file that includes the following Network Link Control Block
information:
- DSL = #XX
- NLCB = #XX
- DslID = 0xXXXX
- Ces = 0xXX
- CallID = 0xXXXX
- ChanID = 0xXXXX
- CallReflen = 0xXX
- CallRef = 0xXXXX
- State = 0xXXXX
- Event = 0xXXXX
- Timer-T304 = 0xXXXX
- Timer-T310 = 0xXXXX
- T303-First = 0xXX
- T308-First = 0xXX
- T313-First = 0xXX
- UserOriginated = 0xXX
- Internal = 0xXX
- Cause = 0xXX
- PreviousCause = 0xXXrw INTEGER .1.3.6.1.4.1.495.2.1.6.32.22.1.13 |