CXGwMux-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
70
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
gmfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.6.5.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.495.2.1.6.5.1 |
gmfMuxInterPassPeriodInMsDetermines the minimum period in milliseconds between the muxing of
queued frames.
Range of Values: 1-500
Default Value: 10
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.1 |
gmfVoiceOverDataPriorityFactorDetermines the maximum number of compressed voice-type frames that can be
muxed in sequence before a compressed data-type frame must be muxed.
Range of Values: 1 - 1,000
Default Value: 1,000
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.2 |
gmfStatSamplingPeriodDetermines the maximum duration in seconds for statistical sampling.
Resetting this sampling window to a different value zeroes the objects
gmfLinkUtilizationTx, gmfLinkUtilizationRx and gmfLinkErrorRate to
begin a fresh sample.
Range of Values: 0 - 3,600
Default Value: 3,600
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.3 |
gmfNoOfLinkSupportedDetermines the number of virtual circuits that the GMF software layer
currently supports for compressed voice/data traffic. If '0', voice/data
traffic is disabled. If '1', then that one voice/data link will be
numbered Link Number 1. If '5', then voice/data links one through five
will be numbered Link Number 1, Link Number 2, Link Number 3, Link Number
4 and Link Number 5, respectively. 'gmfLink' uses the numbers assigned to
these virtual circuits.
Range of Values: 0 - 1,024
Default Value: 0
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.4 |
gmfNoOfEntryPerFiFoDetermines the maximum number of voice/data entries that the queueing
controller (FIFO) in system memory can handle.
Range of Values: 32 - 10,000
Default Value: 256
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.5 |
gmfToFrCouplingLevelNot currently used.rw INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.6 |
gmfOutputFlowControlFactorDetermines the extent to which the GMF software layer slows down
compressed data (but not compressed voice) traffic from a Data Compression
module (if present) after being notified of congestion by the Frame Relay
software layer.
Range of Values: 1 - 10 (10 = slowest)
Default Value: 1
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.7 |
gmfStateIndicates the state of the GMF software layer at initialization. Report
abnormal value to Memotec Service Department.
Options:
dead (1): CX900/CX1000 abnormal
gmf-task-conf (2): CX900/CX1000 abnormal
general-conf (3): CX900/CX1000 abnormal
sap-conf (4): CX900/CX1000 abnormal
route-conf (5): CX900/CX1000 abnormal
init-gmf-completed (6): CX900/CX1000
abnormal
init-appl-completed (7): CX900 normal/CX1000 abnormal
mci-only (8): CX900 abnormal/CX1000 CCM only
reg-to-iam (9): CX900 abnormal/CX1000 normal
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.5.1.8 |
gmfCntInfoMsgRelFromBusIndicates the number of information messages (including Management
Console Interface traffic) received from the Token Bus software layer.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.9 |
gmfCntInfoMsgRelFromWanIndicates the number of compressed voice/data messages received from the
Frame Relay software layer.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.10 |
gmfCntTxAckToWanIndicates the number of ACKs sent to the Frame Relay software layer.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.11 |
gmfCntUnexpLinkNoFromWanIndicates the number of unexpected DLCIs in message headers received from
the Frame Relay software layer.
Range of Values: 0-4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.12 |
gmfCntFrmTooShortFromWanIndicates the number of short frames received from the Frame Relay
software layer and then discarded.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.13 |
gmfCntFrmTooLongFromWanIndicates the number of long frames received from the Frame Relay
software layer and then discarded.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.14 |
gmfLongestTimeToMuxIndicates the duration in milliseconds for the longest mux pass.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.15 |
gmfCntSilentConnectionsIndicates the number of connections with the Voice Module (CX 900 only)
or with a local AC 600/MC 600/HC 600 (CX 1000 only) that have been dropped
by the GMF software layer due to inactivity.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.16 |
gmfCntMuxPassTimeExceededNot currently used.roobsolete Counter .1.3.6.1.4.1.495.2.1.6.5.1.17 |
gmfMciCurrentConnectionNot currently used.roobsolete INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.18 |
gmfCntInfoMsgRelFromVceIndicates the number of information messages received from the Voice
module (if present).
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.19 |
gmfCntGlobalFlowCtlCondIndicates the number of times that voice/data entries nearly exceeded
what the queuing controller (FIFO) in system memory could handle as
defined in 'gmfNoOfEntryPerFifo'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.1.20 |
gmfNoOfVoicePacketQueuedDetermines the maximum number of voice packets that can be buffered
before being muxed.
Range of Values: 0-8
Default Value: 4
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.1.21 |
gmfControlStatsClears GMF statistics not related to sampling period.
Options:
clearStats (1): clear statistics
Default Value: none
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.6.5.1.22 |
gmfRouteTableGMF routing table. The table maintains a row per slot source (i.e. 16
possible rows for the CX 1000 chassis) and GMF link number. This table is
has no meaning for voice stations that use the voice switching option. SEQUENCE OF GmfRouteEntry .1.3.6.1.4.1.495.2.1.6.5.2 |
gmfRouteEntryEach row associates a slot destination number for each possible route
number with a specific <source slot number>.<GMF link number to use>
combination. GmfRouteEntry .1.3.6.1.4.1.495.2.1.6.5.2.1 |
gmfOriginIndicates the slot in the chassis occupied by a CPU card sending
compressed voice/data packets.
Range of Values: 1-16
Default Value: none
Configuration Changed: administrativero INTEGER .1.3.6.1.4.1.495.2.1.6.5.2.1.1 |
gmfLinkIndicates a valid route number established in 'gmfNoOfLinkSupported' that
is used by the Voice/Data Compression module to send compressed voice/data
packets to the Frame Relay software layer.
Range of Values: 1-48
Default Value: none
Configuration Changed: administrativero INTEGER .1.3.6.1.4.1.495.2.1.6.5.2.1.2 |
gmfDestDetermines the slot in an equivalent chassis across the network occupied
by a CPU card receiving compressed voice/data packets.
Range of Values: 1-16
Default Value: undefined
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.2.1.3 |
gmfRouteRowStatusDetermines whether this slot/route combination is to be deleted from the
GMF software layer.
Options:
invalid (1): Row is deleted from the table immediately, however values are
still in effect until the next reset.
valid (2): Use this value to add a new row to the table, or modify an
existing row.
Default Value: none
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.5.2.1.4 |
gmfLinkStatTableGMF links statistics table. The table maintains a row per link. SEQUENCE OF GmfLinkStatEntry .1.3.6.1.4.1.495.2.1.6.5.3 |
gmfLinkStatEntryEach row contains the state variables and general counters associated
with a particular link. GmfLinkStatEntry .1.3.6.1.4.1.495.2.1.6.5.3.1 |
gmfLinkIndexIndicates the row containing objects for monitoring the virtual circuit.
Range of Values: 1 - 48
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.5.3.1.1 |
gmfLinkStatusIndicates the virtual circuit's current state.
Options:
down (1): circuit is down
init (2): circuit is initializing
up (3): circuit is up
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.5.3.1.2 |
gmfLinkTypeIndicates routing of virtual circuit from GMF software layer.
Options:
bound-to-FR (1): direct to Frame Relay module
routed-to-IAM (2): direct to Inter-Application module
in-loopback (3): looped back to Token Bus module or Voice module (if
present)
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.5.3.1.3 |
gmfCntDataFrmMxIndicates the number of data frames that have been muxed since the last
power up or since 'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.4 |
gmfCntDataFrmDmxIndicates the number of data frames that have been demuxed since the last
power up or since 'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.5 |
gmfCntVoiceFrmMxIndicates the number of voice frames that have been muxed since the last
power up or since 'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.6 |
gmfCntVoiceFrmDmxIndicates the number of compressed voice frames that have been demuxed
since the last power up or since 'gmfControlStats' was set to
'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.7 |
gmfCntLinkDownIndicates the number of notifications received from the Frame Relay
software layer that the PVC has been down since the last power up or since
'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.8 |
gmfLinkUtilizationTxIndicates the transfer rate in bits per second of data moving from the
local Voice/Data Compression module to the Frame Relay module within the
last sampling period.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.9 |
gmfLinkUtilizationRxIndicates the transfer rate in bits per second of data moving from the
Frame Relay module to the local Voice/Data Compression module within the
last sampling period.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.10 |
gmfLinkErrorRateIndicates the number of sequence errors occurring within the last
sampling period on the virtual circuit between the GMF and the Frame Relay
software layers.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.11 |
gmfCntInFlowCtrlMuxSideIndicates the number of times the GMF software layer has notified the
Voice/Data Compression module to slow its traffic. This value is zeroed
when 'gmfControlStats' is set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.12 |
gmfCntOutFlowCtrlWanSideIndicates the number of times the GMF software layer has slowed its
muxing of data traffic due to messages received from the Frame Relay
software layer with the BECN bit set. This value is zeroed when
'gmfControlStats' is set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.13 |
gmfCntSeqErrorFromMuxIndicates the number of times the GMF software layer detected sequence
errors in the data stream coming from the Voice/Data Compression module
since the last power up or since 'gmfControlStats' was set to
'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.14 |
gmfCntSeqErrorFromWanIndicates the number of times the GMF software layer detected sequence
errors in the data stream coming from the Frame Relay software layer since
the last power up or since 'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.15 |
gmfCntSilentLinkIndicates whether the GMF software layer detected a silence on the
virtual circuit between the GMF and Frame Relay software layer since the
last power up or since 'gmfControlStats' was set to 'clearStats'.
Options:
false: silence not detected
true: silence detected
Default Value: falsero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.16 |
gmfCntSeqErrorForcedIndicates the number of times the GMF software layer forced a sequence
error in a message to the Frame Relay software layer since the last power
up or since 'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.17 |
gmfCntUnexpLoopBackNot currently used.ro Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.18 |
gmfCntRemoteRestartedNot currently used.ro Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.19 |
gmfCntVoiceMuxInterruptedIndicates the number of times the GMF software layer stopped muxing
current voice traffic to allow for muxing of data traffic in accordance
with the 'gmfVoiceOverDataPriorityFactor' since the last power up or since
'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.20 |
gmfCntDataQueueFullIndicates the number of times that data entries exceeded the capacity of
the queueing controller (FIFO) in system memory since the last power up or
since 'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.21 |
gmfCntVoiceQueueFullIndicates the number of times that voice entries exceeded the capacity of
the queueing controller (FIFO) in system memory since the last power up or
since 'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.22 |
gmfCntUnexpSliceTypeIndicates the number of times the GMF software layer detected a message
of an unexpected type from a Voice/Data Compression module since the last
power up or since 'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.23 |
gmfCntRouteChangeIndicates the number of times an active routing entry using this virtual
circuit has been killed through on-the-fly route changes with
'gmfRouteEntry' since the last power up or since 'gmfControlStats' was set
to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.24 |
gmfCntTooManyCodesIndicates the number of times the GMF software layer received a
compressed voice/data packet containing too many codes from the Voice/Data
Compression module since the last power up or since 'gmfControlStats' was
set to 'clearStats'.
Range of Values: 0 - 4, 294,967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.25 |
gmfCntPosValidationIndicates the number of positive validations the GMF software layer has
sent the Voice/Data Compression module since the last power up or since
'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967,295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.26 |
gmfCntNegValidationIndicates the number of negative validations the GMF software layer has
sent the Voice/Data Compression module since the last power up or since
'gmfControlStats' was set to 'clearStats'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.5.3.1.27 |
gmfControlLinkDetermines whether the GMF software layer puts link in normal mode or in
loopback mode.
Options:
forceNormal (1): puts link in normal mode
forceLoopback (2): puts link in loopback mode
Default Value: none
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.6.5.3.1.29 |
gmfDataOutWindowWidthDetermines the width in the transmit window given to data traffic in
relation to voice traffic. The lower this value, the more restricted will
be the flow of data traffic.
Range of Values: 1-16
Default Value: 6
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.3.1.30 |
gmfDataOutPriorityDetermines the priority given to outbound data traffic routed through the
FRIM software layer. Priority for traffic routed directly through the
Frame Relay software layer is controlled with 'frCircuitPriorityLevel'.
Range of Values: 1 - 4 (4 is the lowest)
Default Value: 1
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.5.3.1.31 |
gmfSRTableGMF system routing table. The table may contain a row per GMF link i.e. up
to 48 rows (currently). SEQUENCE OF GmfSREntry .1.3.6.1.4.1.495.2.1.6.5.4 |
gmfSREntryEach row associates an alias and a subref field to a GMF's link. GmfSREntry .1.3.6.1.4.1.495.2.1.6.5.4.1 |
gmfSRLinkIndicates a valid route number established in 'gmfNoOfLinkSupported' used
by the Voice/Data Compression module to send compressed voice/data packets
to the Frame Relay software layer.
Range of Values: 1 - 1,024
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.5.4.1.1 |
gmfSRDestCircuitAliasDetermines the alias of a circuit specified in the Frame Relay software
layer that will link with the GMF route.
Range of Values:
(CX 1000) 0 - 35 alphanumeric characters beginning
with a non-numeric character
(CX 900) 0 - 16 alphanumeric characters beginning
with a non-numeric character
Default Value: none
Configuration Changed: operativerw Alias .1.3.6.1.4.1.495.2.1.6.5.4.1.2 |
gmfSRSubRefDetermines the reference that one user's segment of traffic will be
assigned on the outbound PVC to distinguish it from traffic segments of
other users of the same outbound PVC.
Range of Values: 1 - 255
Default Value: 1
Configuration Changed: operativerw SubRef .1.3.6.1.4.1.495.2.1.6.5.4.1.3 |
gmfSRConStatusIndicates status of connection on the system route.
Options:
not-init (1): system route not initialized
closed (2): system route closed
waitForQueryConf (3): in progress (query confirmed?)
waitForOpenConf (4): in progress (opening confirmed?)
opened (5): system route opened
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.5.4.1.4 |
gmfSRFailStatusIndicates the reason for a connection failure on a system route prior to
the next attempt to establish a connection on that route.
Default Value: none
Options:
noFailure (1): did not fail
internalError (2): system error
localMemAllocFailure (3): GMF memory allocation error
remoteMemAllocFailure (4): FRIM memory allocation error
remoteNoAccess (5): FRIM not configured
remotePvcDown (6): FRIM reported down
remotevcBusy (7): FRIM busy
localFcnFailure (8): flow control type unknown to GMF
remoteFcnFailure (9): flow control type unknown to FRIM
localDsnFailure (10): GMF could not negotiate data size
remoteAliasNotFound (11): no PVC for destination alias
remoteNoPvcService (12): FRIM not supporting PVC protocol
openReqTimeout (13): timeout of open connection request
adjaCardReset (14): adjacent CPU reset (CX 1000 only)
linkNotSupported (15): system route number not supportedro Enumeration .1.3.6.1.4.1.495.2.1.6.5.4.1.5 |
gmfSRRowStatusDetermines whether this system route is in service or is to be deleted
from the GMF software layer.
Options:
invalid (1): Row is deleted from the table immediately, however values are
still in effect until the next reset.
valid (2): Use this value to add a new row to the table, or modify an
existing row.
Default Value: none
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.6.5.4.1.6 |