CXGwFr-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
11
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
IMPORTSTable containing configuration information about all the GFF module SAPs. SEQUENCE OF GffSapEntry .1.3.6.1.4.1.495.2.1.6.18.1 |
gffSapEntryThis row holds all the parameters related to a particular GFF module SAP. GffSapEntry .gffSapTable.1 |
gffSapIdIdentifies the SAP by a unique numerical value.ro SapIndex .gffSapTable.1.1 |
gffSapRowStatusThis parameter is relevant to upper SAPs only.
Indicates whether this SAP is configured in the CE.
Options:
invalid (1): Deletes the current entry (row) in the table.
valid (2): Creates a SAP entry (row) in the table.
Default Value: valid (2)
Related Objects:
gffSapType
Configuration Changed: administrativerw Enumeration .gffSapTable.1.2 |
gffSapTypeIdentifies the SAP type. There is one lower SAP connected permanently to
TBC and up to 16 upper SAPs connected to FRM.
Options:
lower (1): SAP is a lower type (leads to the bus of the CX1000 chassis)
upper (2): SAP is an upper type (leads to a lower SAP in the Frame Relay
software layer)
Default Value: none
Configuration Changed: administrativerw Enumeration .gffSapTable.1.3 |
gffSapAliasIdentifies the GFF local SAP by a textual name.
Range of Values: 0 to 35 alphanumeric characters beginning with a
non-numeric character.
Default Value:
gffsap1 (for gffSapId 1)
gffsap2 (for gffSapId 2)
gffsap3 (for gffSapId 3)
gffsap4 (for gffSapId 4)
gffsap5 (for gffSapId 5)
gffsap6 (for gffSapId 6)
gffsap7 (for gffSapId 7)
gffsap8 (for gffSapId 8)
gffsap9 (for gffSapId 9)
gffsap10 (for gffSapId 10)
gffsap11 (for gffSapId 11)
gffsap12 (for gffSapId 12)
gffsap13 (for gffSapId 13)
gffsap14 (for gffSapId 14)
gffsap15 (for gffSapId 15)
gffsap16 (for gffSapId 16)
gffsap17 (for gffSapId 17)
Configuration Changed: administrativerw Alias .gffSapTable.1.4 |
gffSapCompanionAliasDetermines the textual name identifying the remote or companion SAP that
will communicate with this SAP.
Range of Values: 0 to 35 alphanumeric characters beginning with a
non-numeric character.
Default Value: undefined for gffSapId 1-16; tbsap4 for gffSapId 17
Configuration Changed: administrativerw Alias .gffSapTable.1.5 |
gffSapAssociatedSlotNoThis parameter is relevant to upper SAPs only.
Identifies the local chassis slot number that communicates with the Frame
Relay service through this SAP.
Range of Values: 1 - 16
Default Value: 6
Related Objects:
gffSapType
Configuration Changed: administrativerw INTEGER .gffSapTable.1.6 |
gffSapWindowWidthThis object is relevant to upper SAPs only and concerns the traffic going
from FRM to GFF.
Determines the number of OS buffers the Frame Relay software layer can
transmitted through this SAP without receiving acknowledgement.
Range of Values: 40 - 100
Default Value: 40
Related Objects:
gffSapType
Configuration Changed: administrativerw INTEGER .gffSapTable.1.7 |
gffSapTrafficPriorityDetermines the priority for sending frames to a PX600 card or to the
Frame Relay software layer.
Options:
1: urgent
2: expeditious
3: normal
Default Value: 3
Configuration Changed: operative, but only if this object's row was
included in the table at the last system reset. Otherwise, change is
administrative.rw INTEGER .gffSapTable.1.8 |
gffSapMaxFrameSizeDetermines the maximum frame size the Frame Relay software layer can
expect from the GFF module.
Range of Values: 3 - 8192 (bytes)
Default Value: 4096
Configuration Changed: operative, but only if this object's row was
included in the table at the last system reset. Otherwise, change is
administrative.rw INTEGER .gffSapTable.1.9 |