CXFrameRelayInterfaceModule-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXFrameRelayInterfaceModule-MIB.
51
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
RFC1155-SMIDetermines the number of seconds to wait before attempting to
re-establish a broken connection on a particular system route.
Range of Values: 1 - 65, 535
Default Value: 30
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.2.1 |
frimServiceCostDetermines the cost of Frame Relay service to be registered in the CX
1000's Inter-Application software layer.
Range of Values: 0 - 65, 535
Default Value: 10
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.2.2 |
frimSapTableA table containing configuration and statistical information about each
frame relay interface module service access point. SEQUENCE OF FrimSapEntry .1.3.6.1.4.1.495.2.1.6.2.3 |
frimSapEntryThe parameters for a particular frame relay module service access point. FrimSapEntry .1.3.6.1.4.1.495.2.1.6.2.3.1 |
frimSapIdIndicates the row containing objects for configuring (or monitoring) a
SAP associated either with the SAP in the Inter-Application software or
with the SAP in the Frame Relay software layer.
Options:
0: IAM-related upper SAP
1: Frame Relay-related lower SAP
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.2.3.1.1 |
frimSapRowStatusDetermines whether this SAP is to be removed from service (i.e.
invalidated) within the FRIM software layer.
Options:
invalid (1): Row is deleted from the table immediately, however values are
still in effect until the next reset.
valid (2): Use this value to add a new row to the table, or modify an
existing row.
Default Value: none
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.2.3.1.2 |
frimSapTypeDetermines this SAP's type.
Options:
lower (1): SAP is a lower type (leads to the Frame Relay software layer)
upper (2): SAP is an upper type (leads to the Inter-Application software
layer)
Default Value: none
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.2.3.1.3 |
frimSapAliasDetermines the textual name uniquely identifying this SAP.
Range of Values:
CX1000: 0 - 35 alphanumeric characters beginning with a non-numeric character
CX900: 0 - 16 alphanumeric characters beginning with a non-numeric character
Default Value:
frimUpper1 (for frimSapId 0)
frimsap1 (for frimSapId 1)
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.2.3.1.4 |
frimSapCompanionAliasDetermines the textual name identifying the companion SAP either in the
Inter-Application software layer or the Frame Relay software layer that
will communicate with this SAP.
Options:
undefined (for frimSapId 0)
frsap41 (for frimSapId 1)
Range of Values:
CX1000: 0 - 35 alphanumeric characters beginning with a non-numeric character
CX900: 0 - 16 alphanumeric characters beginning with a non-numeric character
Configuration Changed: administrativerw Alias .1.3.6.1.4.1.495.2.1.6.2.3.1.5 |
frimSapMaxDlcisDetermines the maximum number of virtual circuits allowed for this SAP.
This object is meaningful only if 'frimSapType' for this SAP is set to
'lower'.
Range of Values: 1 - 1, 022
Default Value: 32
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.2.3.1.6 |
frimSapMaxErrorFramesDetermines the number of frames having FECN and/or BECN bits set that can
be received within the total number of frames defined in
'frimSapMonitorFrames' before the system reports a circuit to be
congested. This object is meaningful only if 'frimSapType' for this SAP is
set to 'upper'.
Range of Values: 1 - 14
Default Value: 10
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.2.3.1.7 |
frimSapMonitorFramesDetermines the total number of frames that will be monitored at any one
time for frames having the FECN and/or BECN bits set. It also defines how
many frames must be received without FECN and/or BECN bits set before the
system decides that a congested circuit has returned to a normal state.
This object is meaningful only if 'frimSapType' for this SAP is set to
'upper'.
Range of Values: 1 - 14
Default Value: 14
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.6.2.3.1.8 |
frimSapFrWindowSizeIndicates the maximum number of outstanding data buffers supported by
this SAP. This object is meaningful only if 'frimSapType' for this SAP is
set to 'lower'.
Range of Values: 3 - 300
Default Value: 150
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.2.3.1.9 |
frimSapControlStatsControls the handling of statistics for this SAP.
Options:
clearSapStats: clears all statistics at this SAP
Default Value: none
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.6.2.3.1.19 |
frimSapstatRxDataFramesIndicates the number of data frames that have been received at this SAP
across all virtual circuits since the last power-up.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.20 |
frimSapstatRxDataOctetsIndicates the number of data octets that have been received at this SAP
across all virtual circuits since the last power-up.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.21 |
frimSapstatTxDataFramesIndicates the number of data frames that have been sent from this SAP
across all virtual circuits since the last power-up.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.22 |
frimSapstatTxDataOctetsIndicates the number of data octets that have been sent from this SAP
across all virtual circuits since the last power-up.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.23 |
frimSapstatUnopenedServiceDiscardsIndicates the number of data frames that have been discarded at this SAP
since the last power-up because the status of the PVC used by this SAP was
inactive.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.24 |
frimSapstatPvcDownDiscardsIndicates the number of received data frames that have been discarded at
this SAP since the last power-up due to failure of the PVC associated with
this SAP. This object is meaningful only if 'frimSapType' for this SAP is
set to 'upper'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.25 |
frimSapstatUserSuccessfulOpensIndicates the number of services that have been opened at this SAP since
the last power-up. This object is meaningful only if 'frimSapType' for
this SAP is set to 'upper'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.26 |
frimSapstatUserUnsuccessfulOpensIndicates the number of times the FRIM software layer was unable to open
a service for a user. This object is meaningful only if 'frimSapType' for
this SAP is set to 'upper'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.27 |
frimSapstatSRSuccessfulConnectsIndicates the number of system route connections that have been
established at this SAP since the last power-up. This object is meaningful
only if 'frimSapType' for this SAP is set to 'upper'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.28 |
frimSapstatSRUnsuccessfulConnectsIndicates the number of times the FRIM software layer attempted but
failed to establish a system route connection between two Frame Relay
service providers. This object is meaningful only if 'frimSapType' for
this SAP is set to 'upper'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.29 |
frimSapstatTxResetsIndicates the number of resets that the FRIM software layer has generated
at this SAP since the last power-up. This object is meaningful only if
'frimSapType' for this SAP is set to 'upper'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.30 |
frimSapstatRxBECNIndicates the number of data frames received with the BECN bit set at
this SAP since the last power-up. This object is meaningful only if
'frimSapType' for this SAP is set to 'lower'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.31 |
frimSapstatRxFECNIndicates the number of data frames received with the FECN bit set at
this SAP since the last power-up. This object is meaningful only if
'frimSapType' for this SAP is set to 'lower'.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.3.1.32 |
frimSysConTableA table containing information about current connections through the
FRIM. SEQUENCE OF FrimSysConEntry .1.3.6.1.4.1.495.2.1.6.2.5 |
frimSysConEntryThe information for a particular connection through the FRIM. FrimSysConEntry .1.3.6.1.4.1.495.2.1.6.2.5.1 |
frimSysConSapIdIndicates the 'frpCircuitSapNumber' of the lower SAP in the Frame Relay
software layer through which a virtual circuit has been created and a
connection has been made.
Options: 1 - 16 (BOP- or DXI-related lower SAPs)
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.2.5.1.1 |
frimSysConDlciIndicates the virtual circuit's DLCI (Data Link Connection Identifier)
for a particular SAP.
Range of Values: 1 - 1,007
Default Value: nonero DLCI .1.3.6.1.4.1.495.2.1.6.2.5.1.2 |
frimSysConPidIndicates the protocol used in the current connection on the virtual
circuit.
Options:
pidFr (1): Frame Relay
pidLan (2): LAN
pidX25 (3): X.25
pidCcm (4): Common Console (CX 1000 only)
pidGmf (5): Muxed traffic
pidLlc2 (6): LLC2
Note: Protocol ID values 7 to 15 are user-definable.
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.2.5.1.3 |
frimSysConRefIndicates the reference that one user's segment of traffic has been
assigned on the outbound PVC to distinguish it from traffic segments of
other users of the same outbound PVC that are using the same protocol.
Range of Values: 1 - 255
Default Value: nonero SubRef .1.3.6.1.4.1.495.2.1.6.2.5.1.4 |
frimSysConRemoteSlotIndicates the physical slot of the card in the local device that is
receiving Frame Relay service.
Range of Values: 1 - 16
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.2.5.1.5 |
frimSysConCreationTimeIndicates the system clock's time at which this connection was created.
Range of Values: system-generated
Default Value: nonero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.2.5.1.6 |
frimSysConReqDataSizeIndicates the data size of a frame requested at connection. If the
request comes from another module in the local device, the application on
that module determines the requested size. If the request comes from the
Frame Relay module, 'bopSapOprPortMaxFrameSize' (default=1,600) minus
overhead defined by 'frpSapAddressLength' (default=two bytes) and, if
enabled, 'frpCircuitMultiProtEncaps' (six bytes if even data bytes in
frame, or seven bytes if odd data bytes in frame) determines this size.
Range of Values: 32 - 4,096
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.2.5.1.7 |
frimSysConNegDataSizeIndicates the data size of a frame negotiated at connection when the
requested size cannot be accommodated. If the requested size can be
accommodated, the requested and negotiated sizes are the same.
Range of Values: 32 - 4,096
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.2.5.1.8 |
frimSysConNegSizeExceededFramesIndicates the number of frames passing across the connection that have
exceeded the negotiated data size.
Range of Values: 0 - 4, 294, 967, 295
Default Value: nonero Counter .1.3.6.1.4.1.495.2.1.6.2.5.1.9 |
frimSysConRefRangeEndIndicates the upper limit of a range of identifiers that different users'
traffic segments on the same outbound PVC can use to remain distinct from
each other.
Range of Values: 0 - 255
Default Value: nonero SubRef .1.3.6.1.4.1.495.2.1.6.2.5.1.10 |
frimSRTableA table containing information about each frame relay system route. SEQUENCE OF FrimSREntry .1.3.6.1.4.1.495.2.1.6.2.6 |
frimSREntryThe information for a particular frame relay system route. FrimSREntry .1.3.6.1.4.1.495.2.1.6.2.6.1 |
frimSRFrpCircuitSapIdIndicates the 'frpCircuitSapNumber' of the lower SAP in the Frame Relay
software layer that provides a system route.
Options:
1-16: BOP- or DXI-related lower SAPs
Default Value: nonero SapIndex .1.3.6.1.4.1.495.2.1.6.2.6.1.1 |
frimSRFrpCircuitDlciIndicates the DLCI (Data Link Connection Identifier) of the virtual
circuit using the SAP specified in the 'frpCircuitSapNumber'.
Range of Values: 1 - 1, 022
Default Value: nonero DLCI .1.3.6.1.4.1.495.2.1.6.2.6.1.2 |
frimSRProtocolIdIndicates the protocol used in the current connection on the virtual
circuit.
Options:
pidFR: Frame Relay
pidLan: LAN
pidX25: X.25
pidCcm: Common Console (CX 1000 only)
pidGmf: Muxed traffic
pidLlc2: LLC2
Note: Protocol ID values 7 to 15 are user-definable.
Default Value: nonero INTEGER .1.3.6.1.4.1.495.2.1.6.2.6.1.3 |
frimSRSubRefIndicates the reference that one user's segment of traffic will be
assigned on the outbound PVC to distinguish it from traffic segments of
other users of the same outbound PVC.
Note: This value and the value assigned for 'frimSRRefRangeEnd', if greater,
form a range of identifiers that different users' traffic segments on the
same outbound PVC can use to remain distinct from each other.
Range of Values: 0 - 255
Note: If set to '0', the FRIM software layer assumes an RFC 1490 header is
already attached to data and therefore will not encapsulate it.
Default Value: nonero SubRef .1.3.6.1.4.1.495.2.1.6.2.6.1.4 |
frimSRRefRangeEndDetermines the upper limit of a range of identifiers that different
users' traffic segments on the same outbound PVC can use to remain
distinct from each other.
Note: If the outbound PVC supports only a single protocol, this value must be
the same as the value set in 'frimSRSubRef'.
Range of Values: 0 - 255
Default Value: none (value set in 'frimSRSubRef')
Configuration Changed: operativerw SubRef .1.3.6.1.4.1.495.2.1.6.2.6.1.5 |
frimSRRowStatusDetermines whether this system route is to be deleted from FRIM software
layer.
Range of Values:
invalid (1): row is flagged; after next reset values will be disabled and
row will be deleted from table
valid (2): values are enabled
Default Value: valid (2)
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.6.2.6.1.6 |
frimSRDestFrpCircuitAliasIdentifies the alias of a circuit specified in another software module
that will link with the circuit being configured in the Frame Relay
module.
Range of Values:
CX1000: 0 - 35 alphanumeric characters beginning with a non-numeric character
CX900 0 - 16 alphanumeric characters beginning with a non-numeric character
Default Value: none
Configuration Changed: operativerw Alias .1.3.6.1.4.1.495.2.1.6.2.6.1.7 |
frimSRDestSubRefDetermines the identifier that one user's traffic segment will have to
distinguish it from another user's traffic segment sharing the same
'frimSRDestFrpCircuitAlias'.
Note:
If 'frimSRSubRef' and 'frimSRRefRangeEnd' form a range of identifiers that
different users' traffic segments on the same outbound PVC can use to
remain distinct from each other, the first value for 'frimSRSubRef' will
correspond to the first value for 'frimSRDestSubRef, the second value for
the former must correspond to the second value for the latter and so on.
Range of Values: 0 - 255
Default Value: none (value set in 'frimSRSubRef'
Configuration Changed: operativerw SubRef .1.3.6.1.4.1.495.2.1.6.2.6.1.8 |
frimSRRouteStatusIndicates the status of a connection on the system route.
Options:
notConnected (1): no connection (destination may not exist or has refused
connection)
inProgress (2): connection in progress
connected (3): connected
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.2.6.1.15 |
frimSRClearStatusIndicates the reason for a connection failure on the system route. This
status is meaningful only between attempts to establish a system route.
Successive failed attempts may or may not change the displayed value.
Options:
noFailure (1): no failure (connection has occurred)
internalError (2): internal system error
localAllocFailure (3): not enough memory in local device to establish
system route at current time
remoteAllocFailure (4): not enough memory in remote device to establish
system route at current time
localNoAccess (5): PVC in local device not configured
remoteNoAccess (6): PVC in remote dcevice not configured
localPvcDown (7): PVC in local device reported down
remotePvcDown (8): PVC in remote device reported down
localPvcBusy (9): PVC in local device is busy (PVC is SPE or PVC is MPE
but 'frimSRSubRef' is in use)
remotePvcBusy (10): PVC in remote device is busy (PVC is SPE or PVC is MPE
but 'frimSRSubRef' is in use)
localFcnFailure (11): local device does not support flow control type
remoteFcnFailure (12): remote device does not support flow control type
localDsnFailure (13): local device could not negotiate size of data unit
because remote's maximum data unit was zero
localRefInUse (14): 'frimSRSubRef' in use in local device
remoteAliasNotFound (15): no PVC in the local device has this destination
alias
remoteNoPvcService (16): remote device does not support PVCs
Default Value: nonero Enumeration .1.3.6.1.4.1.495.2.1.6.2.6.1.16 |