CXDial-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXDial-MIB.
13
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
13 total| Object Name |
|---|
IMPORTSTable containing configuration information about dial functionality. This
table acts as a focal point to configure the dial capability. Each protocol
providing dial incorporates an object which point to one row of this table. SEQUENCE OF CxDialEntry .1.3.6.1.4.1.495.2.1.6.46.1 |
cxDialMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.46.2 |
cxDialEntryThis row holds all the parameters related to the dial functionality. CxDialEntry .cxDialTable.1 |
cxDialEntryIndexLocal table index. Used to manage this table and by application implementing
dial functions.ro INTEGER .cxDialTable.1.1 |
cxDialPhysicalTypeDetermines how the dial function is physically supported.
Options:
dtr (1): Data Terminal Ready
isdn (2): ISDN
Default Value: dtr (1)
Configuration Changed: administrativerw Enumeration .cxDialTable.1.2 |
cxDialFunctionTypeDetermines when the dial function is used.
Options:
onDemand (1): used on demand
onCongestion (2): not currently used
Default Value: onDemand (1)
Configuration Changed: administrativerw Enumeration .cxDialTable.1.3 |
cxDialRowStatusDetermines whether this dial function is to be removed from service
(i.e. invalidated) within the Dial software layer.
Options:
invalid (1): row is flagged; after next reset values will be disabled and row
will be deleted from table
valid (2): values are enabled
Default Value: valid (2)
Configuration Changed: administrativerw Enumeration .cxDialTable.1.6 |
cxDialInactivityTimerDetermines the time in seconds that can pass before a SAP providing dial
access drops its connection due to inactivity.
Range of Values: 0 - 65,535
Default Value: 20
Configuration Changed: administrativerw INTEGER .cxDialTable.1.10 |
cxDialBackupPollingTimerDetermines the interval in seconds that the Frame Relay software layer will
wait before polling and terminating connections of dial backup ports when
primary route partners related to these ports have become active.
Range of Values: 0 - 65,535
Default Value: 0
Configuration Changed: administrativerw INTEGER .cxDialTable.1.11 |
cxDialDelayTimerDetermines the number of seconds that the Frame Relay software layer
waits before requesting the lower layer to bring up the dialup line.
Range of Values: 0 - 65,535
Default Value: 0
Configuration Changed: operativerw INTEGER .cxDialTable.1.12 |
cxDialIsdnBcmUSapAliasDetermines the textual name uniquely identifying this upper SAP. This object
is meaningful only if 'cxDialPhysicalType' is set to 'isdn'.
Range of Values: 0-16 alphanumeric characters beginning with a letter
Default Value: none
Configuration Changed: administrativerw Alias .cxDialTable.1.15 |
cxDialIsdnBcmNbrOfBChannelsDetermines the number of ISDN B channels that have dial funtionality.
This object is meaningful only if 'cxDialPhysicalType' is set to 'isdn'.
Range of Values: 1-2 (locked at 1)
Default Value: 1
Configuration Changed: administrativerw INTEGER .cxDialTable.1.16 |
cxDialIsdnBcmDirectoryIdDetermines the ISDN access point having dial funtionality. This object is
meaningful only if 'cxDialPhysicalType' is set to 'isdn'.
Range of Values: 1-40
Default Value: 1
Configuration Changed: administrativerw INTEGER .cxDialTable.1.17 |