CXDSP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXDSP-MIB.
71
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
RFC1155-SMIA table containing configuration information
about all the service access point. SEQUENCE OF DspSapEntry .1.3.6.1.4.1.495.2.1.6.57.1 |
dspCuTableA table containing configuration information about
all the 3270 controller units. SEQUENCE OF DspCuEntry .1.3.6.1.4.1.495.2.1.6.57.2 |
dspCuEntryThe parameters for a particular controller unit. DspCuEntry .1.3.6.1.4.1.495.2.1.6.57.2.1 |
dspCuSapNumberIdentifies the sap associated with this controller unit.
Each controller unit has an address and the address has to
be unique with one sap. However, the address is not required
to be unique between saps This object is an index in the
sap Table. Values are unique.ro SapIndex .1.3.6.1.4.1.495.2.1.6.57.2.1.1 |
dspCuAddressIdentifies the address of this controller unit.
The address has to be unique for a specified sap.ro DspCuAddress .1.3.6.1.4.1.495.2.1.6.57.2.1.2 |
dspCuRowStatusIndicates whether the particular service access point is
configured within the MIB. Controller unit entries (rows)
may be created by setting this object value to 'valid',
or deleted by changing this object value to 'invalid'.
Whether or not the row actually disappears is left to the
implementation so this object may actually read as 'invalid'
for some arbitrary length of time.rw DspRowStatus .1.3.6.1.4.1.495.2.1.6.57.2.1.3 |
dspCuTypeIdentifies the type of controller: either TIU or HIU.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.2.1.4 |
dspCuCallingX25AddressIdentifies the X25 address of this sap. This address is unique for all
devices attached to this sap, TIU siderw X25Address .1.3.6.1.4.1.495.2.1.6.57.2.1.5 |
dspCuCalledX25AddressIdentifies the X25 address of the remote device.rw X25Address .1.3.6.1.4.1.495.2.1.6.57.2.1.6 |
dspCuDSPCircuitTypeIdentifies the connection as being either only one connection or
multiple DSP connections per X.25 virtual circuit The valid values follow:
singUsr-NoReq Circ - single user per X25 svc, no circuit request. The LCN
is 0.
singUsr-ReqCirc - single user per X25 svc, circuit request. The LCN is
negociated during the connection establishment.
multUser-ReqCirc - multiple user per X25 svc. Each user has a LCN and
the LCN is negociated individually.
MES-Usr-ReqCirc - Modified Bisync single user per X25 svc, circuit request.
The LCN is negociated during the connection establishment.rw DspCircuitType .1.3.6.1.4.1.495.2.1.6.57.2.1.8 |
dspCuWindowDefines the receive window size used for packets. At the source side, it
defines the window for packets received from the source interface. At the
destination side, it defines the window for packets transmitted to the
the source side, it defines the window for packets transmitted to the source interface.
At the destination side, it defines the window for packets received from the destination
interface. Allowable value are '1'-'7' for modulo 8.rw INTEGER .1.3.6.1.4.1.495.2.1.6.57.2.1.9 |
dspCuUserDataThe user data put in the call user data field of call request packets.rw DisplayString .1.3.6.1.4.1.495.2.1.6.57.2.1.10 |
dspCuFacilitySpecifies the facility codes and facility parameters put in the facilities field of the call
call request packet during call set-up.
The maximum number of facility codes and parameters that may be specified is 20.rw OCTET STRING .1.3.6.1.4.1.495.2.1.6.57.2.1.11 |
dspCuApplicationIdIndicates an application running on the host associated
with the controller unit/device.rw INTEGER .1.3.6.1.4.1.495.2.1.6.57.2.1.12 |
dspCuReqModeIdentifies the connection request mode. The
following modes are available :
Fixed Class Crm : destination is selected automatically
Specific Class Crm : select a destination by cu/dev
addresses.
Non-Specific Class Crm : select a destination by
address and application ID.
Associated Device Crm : associate a device with an
existing connection.
The terminal DSP uese the Only the 'fixedClassCrm'
could be supported by this implementation.ro Enumeration .1.3.6.1.4.1.495.2.1.6.57.2.1.13 |
dspCuPacketSizeThe receive and transmit packet size.rw PacketSize .1.3.6.1.4.1.495.2.1.6.57.2.1.14 |
dspCuThroughputThe receive and transmit throughput class across the line.rw ThruputClass .1.3.6.1.4.1.495.2.1.6.57.2.1.15 |
dspCuPartnerThis object identifies the knowledge DSP has about its BSC partner layer
and applies to the controllers acting as Terminal Interface. In normal conditions,
the DSP and BSC layers are configured both having the same interface type (HIU
or TIU). This is the default configuration and it enables the controller the be
the initiator of the X25 connection. The host can't establish an X25 connection
in this configuration.
When the Host is the call establishment initiator, this object could be
configured as Host (HIU) type and the local BSC as (TIU), meaning that the DSP
will behave as a HIU during the call establishment. This object is used just
during the call establishment. There are the following options available:
terminal-terminal DSP and BSC layers are configured as hosts.
host-terminal DSP is configured as host and behaves as a terminal. BSC is configured
as a terminal.rw DspPartner .1.3.6.1.4.1.495.2.1.6.57.2.1.16 |
dspCuControlControl associated with the specified service access point.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.2.1.25 |
dspCuStateControl associated with the specified service access point.ro Enumeration .1.3.6.1.4.1.495.2.1.6.57.2.1.30 |
dspCuOperationalModeIdentifies the controller unit as being
active or non-active with the new configuration.ro DspOperationalMode .1.3.6.1.4.1.495.2.1.6.57.2.1.31 |
dspCuX25CallRequestIdentifies the number of X25 Call Request packets received
by this controller.ro Counter .1.3.6.1.4.1.495.2.1.6.57.2.1.40 |
dspCuX25CallAcceptIdentifies the number of X25 Call Accept packets received
by this controller.ro Counter .1.3.6.1.4.1.495.2.1.6.57.2.1.41 |
dspCuClearsIdentifies the number of Clear Request received from the SNALC layer.ro Counter .1.3.6.1.4.1.495.2.1.6.57.2.1.42 |
dspCuClearsIndIdentifies the number of Clear Indications sent to the SNALC layer.ro Counter .1.3.6.1.4.1.495.2.1.6.57.2.1.43 |
dspCuInvToClearIdentifies the number of INVITATION TO CLEAR packets
received by this controller.ro Counter .1.3.6.1.4.1.495.2.1.6.57.2.1.44 |
dspDevTableA table containing configuration information about
all the devices controlled by this module. SEQUENCE OF DspDevEntry .1.3.6.1.4.1.495.2.1.6.57.3 |
dspDevEntryThe parameters for a particular controller unit. DspDevEntry .1.3.6.1.4.1.495.2.1.6.57.3.1 |
dspDevSapNumberIdentifies the sap to which this device
is attached to.ro SapIndex .1.3.6.1.4.1.495.2.1.6.57.3.1.1 |
dspDevCuAddressIdentifies the address of the controller unit
to which this device is attached.ro DspCuAddress .1.3.6.1.4.1.495.2.1.6.57.3.1.2 |
dspDevAddressIdentifies the address of this device. The
address has to be unique for a specified for
a controller unit.ro DspDevAddress .1.3.6.1.4.1.495.2.1.6.57.3.1.3 |
dspDevRowStatusIndicates whether the particular service access
point is configured within the MIB. Controller unit
entries (rows) may be created by setting this object
value to 'valid', or deleted by changing this
object value to 'invalid'. Whether or not the row
actually disappears is left to the implementation so this
object may actually read as 'invalid' for some
arbitrary length of time.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.4 |
dspDevUCNIdentifies a specific connection.ro INTEGER .1.3.6.1.4.1.495.2.1.6.57.3.1.5 |
dspDevRemoteCuAddressIdentifies the address of remote controller unit
to which this device is connected. This object is set
to 0 if no connection is established.rw DspCuAddress .1.3.6.1.4.1.495.2.1.6.57.3.1.6 |
dspDevRemoteDevAddressIdentifies the address of remote controller unit
to which this device is connected. This object is set
to 0 if no connection is established.rw DspDevAddress .1.3.6.1.4.1.495.2.1.6.57.3.1.7 |
dspDevFormatSizeDescribes the number of characters suported by the device.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.8 |
dspDevAttPrntIdentifies wheather the device has a printer attached.
The device could be a display in order to have a printer
attached.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.9 |
dspDevCharSetIdentifies the support of different character sets.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.10 |
dspDevColourIdentifies wheather the device supports colours.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.11 |
dspDevTTextSupportIdentifies whether it the device supports transparent text.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.12 |
dspDevDPmodeIdentifies wheather the device is a display or printer.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.13 |
dspDevControlControl associated with the specified service access point.rw Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.20 |
dspDevOperationalModeIdentifies the controller unit as being active or non-active
with the new configuration.ro DspOperationalMode .1.3.6.1.4.1.495.2.1.6.57.3.1.30 |
dspDevStateIndicates the state of the conection. The state 'invalid'
means there is no connection. The state 'conected' means
the connection is established.ro Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.31 |
dspDevStatusThis object contains the 'Status' byte, defined by the BSC
protocol for 3270 controller unit family. This object and the
'bscDevSense ' contain the result of the last operations
performed on the device. The controller unit is responsable to
set properly this byte.ro INTEGER .1.3.6.1.4.1.495.2.1.6.57.3.1.32 |
dspDevSenseThis object contains the 'Sense' byte, defined by the BSC
protocol for 3270 controller unit family. This object and
the 'bscDevSense ' contain the result of the last operations
performed on the device. The controller unit is responsable to
set properly this byte.ro INTEGER .1.3.6.1.4.1.495.2.1.6.57.3.1.33 |
dspDevCommandIdentifies the number of COMAMND packets sent/received
by the device. Only the host sends the COMMAND packets.
The host DSP counts the number of packets sent. The
terminal DSP counts the number of packets received.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.41 |
dspDevResponseIdentifies the number of RESPONSE packets sent/received
by the device. Only the termianl sends RESPONSE packets.
The host DSP counts the number of packets received. The
terminal DSP counts the number of packets sent.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.42 |
dspDevCmdRspUndelIdentifies the number of COMAMND/RESPONSE
UNDELIVERED packets. This object notifies how many packets
were rejected by this device. The host DSP counts the number
of COMMAND ABORTED packets received. The terminal DSP
counts the number of RESPONSE ABORTED packets received.. The
error code of the last received packet (COMMAND/REPONSE) is
kept by the object 'dspDevCmdRspUndelReason'.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.43 |
dspDevCmdRspUndelReasonThis object keeps the error code of the last COMAMND/RESPONSE
UNDELIVERED packet received. When conected to another Memotec
device, only the 'wack' reason code could be received. All other
error codes are managed locally by BSC.ro Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.44 |
dspDevCmdRspAbortIdentifies the number of COMAMND/RESPONSE ABORTED packets.
This object notifies how many packets were aborted by this device.
The host DSP counts the number of COMMAND ABORTED packets
received. The terminal DSP counts the number of RESPONSE ABORTED
packets received.. The error code of the last received packet
(COMMAND/REPONSE) is kept by the object dspDevCmdRspAbortReason.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.45 |
dspDevCmdRspAbortReasonThis object keeps the error code of the last COMAMND/RESPONSE
ABORTED packet received. When conected to another Memotec
device, all the abort cases are managed locally by BSC.ro Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.46 |
dspDevStatStatusIdentifies the number of STATUS packets sent/received. Only the terminal
sends this packet. The terminal DSP counts the number of packets sent. The
host DSP counts the number of packets received.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.47 |
dspDevAckIdentifies the number of ACK packets sent by the device. Both host and
terminal DSPs can sent ACK packets.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.48 |
dspDevInvToClearIdentifies the number of INVITATION TO CLEAR packets received
by the device.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.49 |
dspDevInvClearReasonThis object keeps the error code of the last COMAMND/RESPONSE
ABORTED packet received.ro Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.50 |
dspDevResetIdentifies the number of RESET packets received by the device.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.51 |
dspDevResetReasonThis object keeps the error code of the last RESET packet received..ro Enumeration .1.3.6.1.4.1.495.2.1.6.57.3.1.52 |
dspDevCircuitEnabledIdentifies the number of CIRCUIT ENABLED packets received by
the device.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.53 |
dspDevCircuitRequestIdentifies the number of CIRCUIT REQUEST packets received by
the device.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.54 |
dspDevCircuitDisconnectIdentifies the number of DISCONNECT packets received by
the device.ro Counter .1.3.6.1.4.1.495.2.1.6.57.3.1.55 |
dspSapEntryThe parameters for a particular service access point. DspSapEntry .dspSapTable.1 |
dspSapNumberIdentifies the service access point by a numerical value.
This value is used as a index in the saps table. Values are unique
per service access point.ro SapIndex .dspSapTable.1.1 |
dspSapRowStatusIndicates whether the particular service access
point is configured within the MIB Service access
point entries (rows) may be created by setting this
object value to 'valid', or deleted by changing this
object value to 'invalid'. Whether or not the row
actually disappears is left to the implementation so this
object may actually read as 'invalid' for some arbitrary
length of time.rw DspRowStatus .dspSapTable.1.2 |
dspSapTypeIdentifies the service access point by type:'lower'
identifies a SAP leading to a physical X25 port.
'Upper' identifies a SAP acting as an internal
inter-layer logical port.rw Enumeration .dspSapTable.1.3 |
dspSapAliasIdentifies the service access point by a textual
name. Names are unique per service access point.rw Alias .dspSapTable.1.4 |
dspSapCompanionAliasIdentifies the `lower' service access point that
will communicate with this service access point by
a textual name.
Names are unique per service access point. Used to
bind the DSP Sap with the X25 sap.rw Alias .dspSapTable.1.5 |
dspSapSnalcRefIdentifies which upper sap is associated to the lower sap within the DSP
module. Applies only to lower DSP saps (X25 sap).rw INTEGER .dspSapTable.1.6 |
dspSapEbcdicAsciiModeIndicates the character set used by the device defined
for this association. The character set could be a
EBCDIC or ASCII.rw Enumeration .dspSapTable.1.7 |
dspSapControlControl associated with the specified service access point.rw Enumeration .dspSapTable.1.20 |
dspSapOperationalModeIdentifies the service access point as being
active or non-active with the new configuration.ro DspOperationalMode .dspSapTable.1.30 |