CXDDS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
29
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
ddsSlotLineStatusChangeIndicates that an alarm has occurred. The line quality currently in use at
the DDS access point has changed state to any of the states defined in
object ddsSlotLineQuality. TRAP-TYPE .1.3.6.1.4.1.495.2.1.6.39.0.1 |
ddsSlotLoopStatusChangeIndicates an alarm status has occurred. The loopback status currently in use
at the DDS access point has changed state to any of the states defined in
object ddsSlotLineLoopback. TRAP-TYPE .1.3.6.1.4.1.495.2.1.6.39.0.2 |
IMPORTSIdentifies the configuration information for a specific DDS access point and
its associated hardware port. SEQUENCE OF DdsSlotEntry .1.3.6.1.4.1.495.2.1.6.39.1 |
ddsSlotEntryIdentifies the configuration information for a specific DDS access point and
its associated hardware port. DdsSlotEntry .ddsSlotTable.1 |
ddsSlotNumberIdentifies a DDS access point by a numerical value. Each DDS access point
has a unique value.ro SapIndex .ddsSlotTable.1.1 |
ddsSlotAliasAssigns a textual name to the DDS access point. Each access point requires a
unique name. You may not assign the same name twice.
Default Value: none
Range of Values: up to 12 alphanumeric characters, the first must be
a letter.
Configuration Changed: operativerw Alias .ddsSlotTable.1.2 |
ddsSlotRowStatusDetermines the status of the objects in a row.
Default Value: valid
Options:
invalid (1): row is flagged, after next reset the values will be disabled and
the row will be deleted from the table
valid (2): values are enabled
Configuration Changed: administrativerw Enumeration .ddsSlotTable.1.3 |
ddsSlotStatusIdentifies the status of the DDS option card as present, not present or
present but failed.
Default Value: none
Options:
dds-not-present (1)
dds-present (2)
dds-present-failed (3)ro Enumeration .ddsSlotTable.1.4 |
ddsSlotConfigLineTypeAssigns the DDS line configuration.
Default Value:
telco-point-to-point (1)
Options:
telco-point-to-point (1)
telco-multipoint (2)
idm-timing-slave (3)
idm-timing-master (4)
Configuration Changed: operativerw Enumeration .ddsSlotTable.1.5 |
ddsSlotConfigLineServiceAssigns the DDS line service type.
Default Value: dds-56K (2)
Range of Values:
clear-channel-64K (1)
switched-56K (2)
dds-56K (3)
dds-19200 (4)
dds-9600 (5)
dds-4800 (6)
dds-2400 (7)
dds-1200 (8)
Configuration Changed: operativerw Enumeration .ddsSlotTable.1.6 |
ddsSlotConfigLoopbackSpecifies the DDS loopback type.
Default Value: no-loopback (1)
Range of Values:
no-loopback (1)
dte-loopback (2)
loop2 (3),
loop3 (4),
loop4 (5)
remote-loop2 (6)
Configuration Changed: operativerw Enumeration .ddsSlotTable.1.7 |
ddsSlotConfigRemLoop2LocalAddressSpecifies the local address for V.54 remote loop2.
Default Value: none
Range of Values: 0 to 255
The 34 valid V.54 hex addresses include:
0x01,
0x03, 0x05, 0x07, 0x09,
0x0B,
0x0D, 0x0F, 0x11, 0x13, 0x15, 0x17,
0x19, 0x1B, 0x1D, 0x1F, 0x25, 0x27,
0x2B, 0x2D, 0x2F, 0x33, 0x35, 0x37,
0x3B, 0x3D, 0x3F, 0x55, 0x57, 0x5B,
0x5F, 0x6F, 0x77, 0x7F
Configuration Changed: operativerw INTEGER .ddsSlotTable.1.8 |
ddsSlotConfigRemLoop2RemoteAddressSpecifies the remote address for V.54 remote loop2.
Range of Values: 0 to 255
Default Value: none
Configuration Changed: operativerw INTEGER .ddsSlotTable.1.9 |
ddsSlotConfigPatternGenSpecifies the type of pattern generated.
Range of Values:
no-pattern (1)
pattern-511 (2)
pattern-511-with-errors (3)
Default Value: no-pattern (1)
Configuration Changed: operativerw Enumeration .ddsSlotTable.1.10 |
ddsSlotDialNumberAssigns the dial number for switched56 applications.
Default Value: none
Range of Values: 12 character octet string
Configuration Changed: operativerw DisplayString .ddsSlotTable.1.11 |
ddsSlotSoftwareRevisionIndicates the DDS firmware revision as an integer value
from 0 to 255.
Default Value: none
Range of Values: 0-255ro INTEGER .ddsSlotTable.1.12 |
ddsSlotStuffingOptionIdentifies whether the clear channel chip (ccc) option (for 64K clear
channel) is installed.
Default Value: none
Options:
ccc-installed (1)
ccc-not-installed (2)ro Enumeration .ddsSlotTable.1.13 |
ddsSlotLineQualityIdentifies whether the link is up, if no link exists or if a network error
(OOS - out of service) has occurred.
Default Value: none
Options:
link (1)
no-link (2)
network-error-oos (3)ro Enumeration .ddsSlotTable.1.14 |
ddsSlotLineRelativeReceiveLevelMinIndicates the minimum relative receive line level.
Default Value: none
Range of Values: 0-255ro INTEGER .ddsSlotTable.1.15 |
ddsSlotLineRelativeReceiveLevelMaxIndicates the maximum relative receive line level.
Default Value: none
Range of Values: 0-255ro INTEGER .ddsSlotTable.1.16 |
ddsSlotLineLoopbackIndicates the loopback status of the line.
Options:
none (1)
csu-loopback (2)
dsu-loopback (3)
dte-loopback (4)
loop2 (5)
loop3 (6)
loop4 (7)
remote-loop2 (8)
Default Value: none (1)ro Enumeration .ddsSlotTable.1.17 |
ddsSlotResultErtPatternDetectIdentifies the reception of the 511 bit pattern or not.
Options:
not-receiving-pattern (1)
receiving-pattern (2)
receiving-patt-with-errors (3)
Default Value: nonero Enumeration .ddsSlotTable.1.18 |
ddsSlotResultPatternGenIdentifies what type of pattern the DDS is generating on the line.
Options:
no-pattern (1)
ert-pattern (2)
ert-with-errors (3)
Default: nonero Enumeration .ddsSlotTable.1.19 |
ddsSlotResultDialingIndicates the dialing result codes for switched56 service as: dialing,
connection made, the connection is not switched56, that a number has not been
supplied by the host, no link available, no wink available, wink invalid or
no answer.
Options:
dialing-idle (1)
dialing-now (2)
connection-made (3)
err-no-num-from-host (4)
err-no-link (5)
err-no-rx-idle (6)
err-no-wink (7)
err-invalid-wink (8)
err-no-answer (9)
Default Value: nonero Enumeration .ddsSlotTable.1.20 |
ddsSlotModelIndicates the Printed Circuit Board (PCB) model number .
Range of Values: 0-7
Default: nonero INTEGER .ddsSlotTable.1.21 |
ddsSlotRevisionIndicates the PCB revision level.
Range of Values: 0-15
Default Value: nonero INTEGER .ddsSlotTable.1.22 |
ddsSlotEcoIndicates the PCB Engineering Change Order (ECO) level.
Range of Values: 0-15
Default Value: nonero INTEGER .ddsSlotTable.1.23 |
ddsSlotLineTrapDetermines the status of the line trap.
Options:
disabled (1)
enabled (2)
Default Value: disabled (1)
Configuration Changed: operativerw Enumeration .ddsSlotTable.1.24 |
ddsSlotLoopTrapDetermines the status of the loopback change trap.
Range of Values:
disabled (1)
enabled (2)
Default Value: disabled (1)
Configuration Changed: operativerw Enumeration .ddsSlotTable.1.25 |