CXCommonConsole-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXCommonConsole-MIB.
11
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
IMPORTSDetermines the amount of time (in seconds) that the Common Console will
wait for input before terminating a user session. The user must logon
again and start a new session to continue.
Range of Values: 10 - 65,535
Default Value: 300
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.5.14.1 |
cxCcPasswordDetermines the password required to logon through the CX1000 console port
to the Common Console module. The password must be between 6 and 16
alphanumeric characters in length.
Default Value: supervisor
Configuration Changed: operativerw DisplayString .1.3.6.1.4.1.495.2.1.5.14.2 |
cxCcPromptDetermines the prompt that will appear after logging on to and
establishing a session with the Common Console to prompt the user for the
next command.
Range of Values: from 1 to 16 alphanumeric characters
Default Value: Common Console
Configuration Changed: operativerw DisplayString .1.3.6.1.4.1.495.2.1.5.14.3 |
cxCcLogDeviceEstablishes the operational status (enabled or disabled) of the logging
device within the chassis. If enabled, the Common Console will send
system-generated messages to a log located in 'cxCcLogDeviceSlot'.
Options:
disabled (1): no events written to the log file
enabled (2): events written to the log file
Default Value: enabled (2)
Related Objects:
cxCcLogDeviceSlot
Configuration Changed: operativerw Enumeration .1.3.6.1.4.1.495.2.1.5.14.4 |
cxCcLogDeviceSlotEstablishes the physical slot number in the local chassis where the
logging device is located. All log messages produced locally are routed to
this slot. However, if this slot is more than one hop away from the
current Common Console, messages are discarded. If the value of this
object is set to '0', the console considers that there is no logging
device in this chassis and sends log messages to all endpoints connected
to the local User Interface.
Range of Values: 1 - 16
Default Value: 0
Configuration Changed: operativerw INTEGER .1.3.6.1.4.1.495.2.1.5.14.5 |
cxCcQueueDepthDetermines the maximum number of log messages that are retained in the
console device output when the console device is flow-controlled
(XOFF'ed). Once the maximum number of log messages is attained, the Common
Console module discards new log messages targeted for the console device.
Range of Values: 0 - 218
Default Value: 0
Configuration Changed: administrativerw INTEGER .1.3.6.1.4.1.495.2.1.5.14.6 |
cxCcRemoteTableA table containing the locally defined network access required to connect
to the remote Common Console module. SEQUENCE OF CxCcRemoteEntry .1.3.6.1.4.1.495.2.1.5.14.7 |
cxCcRemoteEntryEntry defining the network access. CxCcRemoteEntry .1.3.6.1.4.1.495.2.1.5.14.7.1 |
cxCcRemoteIndexIndex for table management only. No other MIB object refers to this
index.ro INTEGER .1.3.6.1.4.1.495.2.1.5.14.7.1.1 |
cxCcRemoteDestAliasIdentifies the name used to query the IAM module to resolve the location
of this network service.
Range of Values: 0 to 15 alphanumeric characters beginning with an
alphabetic character
Configuration Changed: operativerw Alias .1.3.6.1.4.1.495.2.1.5.14.7.1.2 |
cxCcRemoteRowStatusIndicates if this entry in the table is valid. The entry may be deleted
when this object is set to 'invalid'. Once deleted, the entry can not be
read back.
Options:
invalid (1): entry can be deleted
valid (2): entry is still in use and should not be deleted
Default Value: valid (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.5.14.7.1.3 |