CXCFG-IPX-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
28
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
cxCfgIpx OBJECT IDENTIFIER .1.3.6.1.4.1.495.2.1.6.13.1 |
IMPORTS Unknown .1.3.6.1.4.1.495.2.1.6.13.1 |
cxCfgIpxNumClockTicksPerSecondIdentifies the number of clock ticks per second.
Range of Values: None
Default Value: The value is always 1rw INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.1 |
cxCfgIpxPortTableProvides configuration information for each IPX port.
The table contains three default entries (rows); each row corresponds
to a particular IPX port. Some of the values in a row can be modified. If
more than three IPX ports are required, additional entries can be added. SEQUENCE OF CxCfgIpxPortEntry .1.3.6.1.4.1.495.2.1.6.13.1.2 |
cxCfgIpxPortEntryProvides configuration information for a particular IPX port. Some of the
parameters can be modified. CxCfgIpxPortEntry .1.3.6.1.4.1.495.2.1.6.13.1.2.1 |
cxCfgIpxPortIdentifies the number of the IPX Port. The number is used as local
index for this and the ipxStatsTable.
Range of Values: From 1 to 32
Default Value: None
Note: The system defines three default entries; their respective values are 1, 2, and 3.ro INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.2.1.1 |
cxCfgIpxPortIfIndexIdentifies the table row that contains configuration or monitoring objects
for a specific type of physical interface.
Range of Values: From 1 to the number of entries in the interface table.
Default value: Nonero INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.2.1.2 |
cxCfgIpxPortSubnetworkSAPAliasDetermines the name which uniquely defines the cxCfgIpxPortSubnetworkSap.
Range of Values: 0 to 16 alphanumeric characters. The first character
must be a letter, spaces are not allowed.
Default Values: None
Note: The system defines three default entries; their respective values
are LAN-PORT1, CNV-PORT1, and CNV-PORT2.
Related Parameter:
The object must be the same as cxLanIoPortAlias
of the cxLanIoPortTable, and cxFwkDestAlias in cxFwkCircuitTable.
Configuration Changed: Administrativerw Alias .1.3.6.1.4.1.495.2.1.6.13.1.2.1.3 |
cxCfgIpxPortStateDetermines the initialization state of the IPX port.
Options:
on (1): The port is active, transmission is possible.
off (2): The port is inactive, transmission is not possible.
Default Values: (1) On. For LAN ports
(2) Off. For convergence ports
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.4 |
cxCfgIpxPortRowStatusDetermines the status of the objects in a table row.
Options:
valid (1): Values are enabled.
invalid (2): Row is flagged, after next reset the values will be disabled
and the row will be deleted from the table.
Default Value: (1) Valid. Values are enabled
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.5 |
cxCfgIpxPortTransportTimeDetermines the transport time, in clock ticks, for LAN or WAN links.
This value is set to 1 for LAN links. WAN links may have a value of 1 or
higher. One clock tick is 55 ms.
Range of Values: From 1 to 30
Default Value: 1
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.2.1.6 |
cxCfgIpxPortMaxHopsDetermines the maximum number of hops a packet may take before it is
discarded.
Range of Values: From 1 to 16
Default Value: 16
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.2.1.7 |
cxCfgIpxPortIntNetNumDetermines the IPX internal network number associated with the port. The
number must be entered as 8 hexadecimal characters, for example 0xAB12CD34.
The x must be lowercase; the others are not case sensitive.
Range of Values: 4 octets, each character ranging from 00 to FF
Default Value: None
Note: The system defines three default entries; their respective values are
00 00 00 0xa2, 00 00 00 0xf1, and 00 00 00 0xf2.
Configuration Changed: Administrativerw NetNumber .1.3.6.1.4.1.495.2.1.6.13.1.2.1.8 |
cxCfgIpxPortPerSapBcastDetermines whether periodic SAP broadcasting is active.
Options:
On (1): SAP broadcasting is active, and the router sends periodic SAP
broadcasts to advertise its services to other locally attached networks.
Off (2): SAP broadcasting is inactive.
Default Value: (1)
Related parameter: The frequency of the broadcast is determined by
cxCfgIpxPortPerSAPTxTimer.
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.9 |
cxCfgIpxPortPerRipBcastDetermines whether periodic RIP broadcasting is active.
Options:
on (1): RIP broadcasting is active, and the router sends periodic
RIP broadcasts to advertise its services to other locally attached networks.
off (2): RIP broadcasting is inactive.
Default Value: on (1)
Related Parameter: The frequency of the broadcast is determined by
cxCfgIpxPortPerRipTxTimer.
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.10 |
cxCfgIpxPortSapBcastDetermines whether the port sends a SAP broadcast in response to a SAP
query sent by another router.
Options:
on (1): The port will respond to SAP queries.
off (2): The port will not respond to SAP queries.
Default Value: on (1)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.11 |
cxCfgIpxPortRipBcastDetermines whether the port sends a RIP broadcast in response to a RIP
query sent by another router. When the value is set to on, the port
responds to RIP queries.
Options:
On (1): The port will respond to RIP queries.
Off (2): The port will not respond to RIP queries.
Default Value: on (1)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.12 |
cxCfgIpxPortDiagPacketsDetermines whether the IPX port will respond to diagnostic packets.
Options:
On (1): The port will respond, and will transmit a diagnostic response
packet.
Off (2): The port will not respond.
Default Value: off (2)
Configuration Changed: Administrative.rw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.13 |
cxCfgIpxPortPerRipTxTimerDetermines the length of time, in seconds, between periodic RIP broadcasts.
Range of Values: From 1 to 3600
Default Value: 60
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.2.1.14 |
cxCfgIpxPortPerSapTxTimerDetermines the length of time, in seconds, between periodic SAP broadcasts.
Range of Values: From 1 to 3600
Default Value: 60
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.2.1.15 |
cxCfgIpxPortRipAgeTimerDetermines the length of time, in seconds, that an entry can remain in
the IPX port's RIP table without being updated. When the value (number of
seconds) expires the entry in the RIP table is deleted. A value of 0 means
aging is not used.
Range of Values: From 1 to 3600
Default Value: 180
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.2.1.16 |
cxCfgIpxPortSapAgeTimerDetermines the length of time (aging), in seconds, that an entry can
remain in the IPX port's SAP table without being updated. When the value
(number of seconds) expires the entry in the SAP table is deleted. A value
of 0 means aging is not used.
Range of Values: From 1 to 3600
Default Value: 180
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.2.1.17 |
cxCfgIpxPortFrameTypeDetermines which type of framing is used for IPX header information.
Framing refers to the way the header information is formatted. The format
is determined by the destination IPX number. Upon receipt of data, the IPX
router checks its address tables to determine which header format is
used by the destination address.
The first three options are used for LAN data; the fourth option is used
for WAN (frame relay) destinations.
Options:
raw- 802-3 (1): Used for LAN data.
ethernet-II (2): Used for LAN data.
LLC-802-3 (3): Used for LAN data.
snap (4): Used for WAN (frame relay).
Default Value: raw- 802-3 (1)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.18 |
cxCfgIpxPortWatchSpoofDetermines whether IPX Watchdog Spoofing is enabled (on). IPX Watchdog
Spoofing is a software technique that limits the number of IPX Watchdog
frames that are sent over a WAN; the technique is intended to decrease the
use of expensive WAN lines without disturbing overall network use.
If IPX Watchdog Spoofing is desired, the remote peer must also have this
parameter enabled.
Options:
on (1): IPX Watchdog Spoofing is enabled.
off (2): IPX Watchdog Spoofing is disabled.
Default Value: off (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.19 |
cxCfgIpxPortSpxWatchSpoofDetermines whether SPX Watchdog Spoofing is enabled (on). SPX Watchdog
Spoofing is a software technique that limits the number of SPX Watchdog
frames that are sent over a WAN; the technique is intended to decrease the
use of expensive WAN lines without disturbing overall network use.
If SPX Watchdog Spoofing is desired, the remote peer must also have this
parameter on.
Options:
On (1): SPX Watchdog Spoofing is enabled.
Off (2): SPX Watchdog Spoofing is disabled.
Default Value: off (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.20 |
cxCfgIpxPortSerialSpoofDetermines whether Serialization Spoofing is (enabled) on. Serialization
Spoofing is a software technique that limits the number of Serialization
frames (they test the legal version of Novell software) that are sent over
a WAN; the technique is intended to decrease the use of expensive WAN lines
without disturbing overall network use.
Options:
on (1): Serialization Spoofing is enabled.
off (2): Serialization Spoofing is disabled.
Default Value: off (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.21 |
cxCfgIpxPortSRSupportDetermines whether the port should support Source Routing
packet. If it is enabled, the physical infterface of the port
must be Token-Ring. If it is disabled, any Source Routing
packet will be discarded.
Default Value: disabled (2)
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.13.1.2.1.22 |
cxCfgIpxMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.13.1.20 |