CXCFG-IP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
35
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
cxCfgIpPingTableProvides the configuration to perform an IP Ping.
The table contains one default entry (row) which can be modified. SEQUENCE OF CxCfgIpPingEntry .1.3.6.1.4.1.495.2.1.6.11.1 |
cxCfgIpPingEntryIdentifies the configuration of a Ping table. CxCfgIpPingEntry .1.3.6.1.4.1.495.2.1.6.11.1.1 |
cxCfgIpPingIndexDetermines the number used to index the Ping entry table.
Range of Values: From 1 - 32
Default Value: None
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.11.1.1.1 |
cxCfgIpPingDestAddrThe Destination IP Address, a unique IP number.
Default Value: Nonerw IpAddress .1.3.6.1.4.1.495.2.1.6.11.1.1.2 |
cxCfgIpPingGapsInMsGaps in Tenths of a second between ping frames.
Range of Values: From 1 to 1000
Default Value: 10rw INTEGER .1.3.6.1.4.1.495.2.1.6.11.1.1.3 |
cxCfgIpPingNbOfPingsNumber of Ping frames to send. A value of 0, means run infinitely.
Range of Values: From 0 to 4,000,000
Default Value: 1rw INTEGER .1.3.6.1.4.1.495.2.1.6.11.1.1.4 |
cxCfgIpPingDataSizeSize of data packet to send in the IP Ping frame.
Range of Values: From 1 to 300
Default Value: 64rw INTEGER .1.3.6.1.4.1.495.2.1.6.11.1.1.5 |
cxCfgIpPingRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): Row is flagged. After next reset the values will be disabled
and the row will be deleted from the table.
valid (2): Values are enabled.
Default Value: (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.11.1.1.10 |
cxCfgIpPingTriggerSendThe parameter that triggers whether Pings are sent out.
Options:
ipIdle (1): No Pings are sent
ipSend (2): The counter is set to zero and Pings are sent
Default Value: ipIdle (1)rw Enumeration .1.3.6.1.4.1.495.2.1.6.11.1.1.11 |
cxCfgIpPingNbTxThe number of Ping frames transmitted.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.20 |
cxCfgIpPingNbReplyRxThe number of positive Ping replies received.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.21 |
cxCfgIpPingNbErrorRxThe number of error replies received.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.22 |
cxCfgIpPingLastSeqNumRxThe sequence of the last Ping frame received.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.23 |
cxCfgIpPingLastRoundTripInMsThe time elapsed in milliseconds for the round trip of the last Ping frame.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.24 |
cxCfgIpPingAvgRoundTripInMsThe average time spent in ms for the round trips of the each Ping frame.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.25 |
cxCfgIpPingMinRoundTripInMsThe minimum time spent in ms for a round trips of a Ping frame.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.26 |
cxCfgIpPingMaxRoundTripInMsThe maximum time spent in ms for a round trips of a Ping frame.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.27 |
cxCfgIpPingLastNumHopsTraveledThe number of hops traveled counter for the last Ping frame.ro Counter .1.3.6.1.4.1.495.2.1.6.11.1.1.28 |
RFC1155-SMIProvides the configuration and addressing information for eachIP port.
This information is used when a port binds to a physical port or a
convergence port.
The table contains one default entry (row) which can be modified.
If more than one IP port is required, additional entries can be added. SEQUENCE OF CxCfgIpAddrEntry .1.3.6.1.4.1.495.2.1.6.15.1 |
cxCfgIpRIPDetermines whether RIP is enabled or disabled on this router.
Options:
on (1): RIP enabled
off (2): RIP disabled
Default Value: on
Configuration Changed: administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.16.1 |
cxCfgRIPIIDetermines whether RIP-2 is enabled or disabled on this router. RIP-2 can
only be enabled, if RIP is also enabled.
Options:
on (1): RIP-2 enabled
off (2): RIP-2 disabled
Default Value: on (1)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.16.2 |
cxCfgIpMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.16.3 |
cxCfgIpAddrEntryIdentifies the configuration and addressing information for a particular
IP port. This information is used when the port binds to a physical
port or a convergence port. CxCfgIpAddrEntry .cxCfgIpAddrTable.1 |
cxCfgIpAdEntAddrDetermines the IP address assigned to a particular IP Port. The value of
this address is used to index this row of the table.
Range of Values: 4 integers, each one ranging from 0 to 255.
Default Value: 00.00.00.00
Configuration Changed: Administrative.ro IpAddress .cxCfgIpAddrTable.1.1 |
cxCfgIpAdEntIfIndexIdentifies the table row that contains configuration or monitoring objects
for a specific type of physical interface.
Range of Values: From 1 to the number of entries in the interface table.
Default Value: Nonerw INTEGER .cxCfgIpAddrTable.1.2 |
cxCfgIpAdEntNetMaskDetermines the subnet mask associated with this IP address. The mask
defines which part of the IP address is the network and which part is
the host.
Range of Values: 4 integers, with the parts identifying the network set to
255 and the parts identifying the host set to 0.
Default Value: 00.00.00.00.
Configuration Changed: Administrative.rw IpAddress .cxCfgIpAddrTable.1.3 |
cxCfgIpAdEntBcastAddrThe value of the least-significant bit in the IP broadcast address used
for sending datagrams on the (logical) interface associated with the IP
address of this entry. For example, when the Internet standard all-ones
broadcast address is used, the value will be 1. This value applies to
both the subnet and network broadcasts addresses used by the entity on
this (logical) interface.rw INTEGER .cxCfgIpAddrTable.1.4 |
cxCfgIpAdEntSubnetworkSAPAliasDetermines the name which uniquely identifies the
cxCfgIpAdEntSubnetworkSAP.
Range of Values: 0 to 16 alphanumeric characters. (Note that the
first character must be a letter, spaces are not allowed).
Default Value: LAN_PORT1
Related Parameters:
If the IP port binds to a physical port, then the alias must match the
alias defined in cxLanIoPortAlias of the cxLanIoPortTable; if the IP port
binds to a convergence port, then the alias must match the port's alias
defined in cxConvPortAlias of the cxConvTable.
Configuration Changed: Administrativerw Alias .cxCfgIpAddrTable.1.5 |
cxCfgIpAdEntRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): Row is flagged. After next reset the values will be disabled
and the row will be deleted from the table.
valid (2): Values are enabled.
Default Value: (2)
Configuration Changed: Administrativerw Enumeration .cxCfgIpAddrTable.1.6 |
cxCfgIpAdEntStateDetermines whether the IP port is active or inactive.
Options:
On (1): The port is active, transmission is possible.
Off (2): The port is inactive, transmission is not possible.
OnEther (3): The Ethernet STP port will bind to this IP port.
OnToken (4): The Token Ring STP port will bind to this IP port.
Default Value: (1)
Configuration Changed: Administrativerw Enumeration .cxCfgIpAddrTable.1.7 |
cxCfgIpAdEntPeerAddrDetermines the IP address of the port's closest neighbor (the port that is
one hop away). The object is only applicable if the IP port binds to a
convergence port. On broadcast networks, this value can be void,
i.e. 00.00.00.00.
Range of Values: 4 integers, each one ranging from 0 to 255.
Default Values: 00.00.00.00
Configuration Changed: Administrativerw IpAddress .cxCfgIpAddrTable.1.8 |
cxCfgIpAdEntRtProtoDetermines which routing protocol the IP port is associated with.
Options:
none (1): No routing protocol is used
rip (2): Routing Information Protocol (RIP). A distance vector routing
protocol popular for routing IP.
ospf (3): Open Shortest Path First (OSPF). A link state routing protocol
used for routing IP.
Default Value: rip (2)
Configuration Changed: administrativerw Enumeration .cxCfgIpAddrTable.1.9 |
cxCfgIpAdEntMtuDetermines the size, in bytes, of the largest IP packet that can be sent
or received at the IP layer. Packets that exceed this size are fragmented.
This value should always be less than or equal to the sub-layer
packet size.
Range of Values: 64-4096
Default Value: 1600
Configuration Changed: administrativerw INTEGER .cxCfgIpAddrTable.1.10 |
cxCfgIpAdEntReplyToRARPDetermines whether the port should reply a RARP request.
Default Value: disabled (2)
Configuration Changed: administrativerw Enumeration .cxCfgIpAddrTable.1.11 |
cxCfgIpAdEntSRSupportDetermines whether the port should support Source Routing
packet. If it is enabled, the physical infterface of the port
must be Token-Ring. If it is disabled, any Source Routing
packet will be discarded.
Default Value: disabled (2)
Configuration Changed: administrativerw Enumeration .cxCfgIpAddrTable.1.12 |