CXCFG-BR-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
19
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
IMPORTSDetermines the number of entries in the filtering database. Available RAM
is the parameter.
Range of Values: None
Default Value: None
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.14.1 |
cxCfgDot1dBaseNumOfStaticDBFilterEntriesDetermines the number of static entries in the filtering database.
Available RAM is the parameter.
Range of Values: None
Default Value: None
Configuration Changed: Administrativerw INTEGER .1.3.6.1.4.1.495.2.1.6.14.2 |
cxCfgDot1dBasePortTableA table that contains basic information about every port that is associated
with this bridge. SEQUENCE OF CxCfgDot1dBasePortEntry .1.3.6.1.4.1.495.2.1.6.14.3 |
cxCfgDot1dBasePortEntryContains configuration information for each port of the bridge. CxCfgDot1dBasePortEntry .1.3.6.1.4.1.495.2.1.6.14.3.1 |
cxCfgDot1dBasePortDisplays the port number.
Options:
The acceptable values depend on the type of device that you are configuring.
In the CX900 architecture:
11, 21, 31, 41, 51, 61 or 71. The first digit identifies the slot number
the I/O board resides in, the second digit identifies the number of the port
on the I/O board.
In the CX1000 architecture:
Accepts only the value '1'. The LAN module only supports 1 port per I/O
board. You distinguish between multiple I/O boards by specifying the slot
number of the I/O board using another object.
Default Value: 1ro INTEGER .1.3.6.1.4.1.495.2.1.6.14.3.1.1 |
cxCfgDot1dBasePortIfIndexDisplays the table row that contains configuration or monitoring objects
for a specific type of physical interface.
Range of Values: From 1 to the total number of entries in the
Interface Table.
Default Value: '0' indicates there is no corresponding entry in the
Interface Table for this port.ro INTEGER .1.3.6.1.4.1.495.2.1.6.14.3.1.2 |
cxCfgDot1dBasePortSubnetworkSapAliasSpecifies a name (alias) for the physical or convergence port to which this
port binds in order to establish a circuit for transmission. This value must
match a physical or convergence port's alias, as defined by the
cxLanIoPortAlias object in the cxLanIoPortTable or by the object
cxConvPortAlias in the cxConvTable.
Range of Values: From 1 to 32 alphanumeric characters. You can use any
combination of letters and numbers however, you cannot use blank spaces.
Use a dash or underscore as a delimiter.
Default Value: LAN-PORT1
Configuration Changed: Administrativerw Alias .1.3.6.1.4.1.495.2.1.6.14.3.1.3 |
cxCfgDot1dBasePortRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): Row is flagged; after the next reset the values will be
disabled and the row will be deleted from the table).
valid (2): Values are enabled.
Default value: valid (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.14.3.1.4 |
cxCfgDot1dBasePortStateDetermines the state of the STP port.
Options:
On (1): The STP port is set to on.
Off (2): The STP port is set to off.
OnEther (3): The Ethernet STP port will bind to IP.
OnToken (4): The Token Ring STP port will bind to IP.
Default value: On (1)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.14.3.1.5 |
cxCfgDot1dBasePortPriorityDetermines the filtering/forwarding action and the forwarding priority
for data sent from the STP bridge.
Options:
discard (1): Do not forward the data.
forward (2): Forward the data.
priority-low (3): Forward with a low priority (Frame Relay only).
priority-high (4): Forward with a high priority (Frame Relay only).
Default Value: forward (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.14.3.1.6 |
cxCfgDot1dBaseMibLevelUsed to determine current MIB module release supported
by the agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.14.4 |
cxCfgSrBasePortTableA table that contains basic information about every port that is associated
with this SR bridge. SEQUENCE OF CxCfgSrBasePortEntry .1.3.6.1.4.1.495.2.1.6.17.1 |
cxCfgSrBasePortEntryConfiguration information for each port of the SR bridge. CxCfgSrBasePortEntry .1.3.6.1.4.1.495.2.1.6.17.1.1 |
cxCfgSrBasePortDisplays the port number.
Options:
The acceptable values depend on the type of device that you are configuring.
In the CX 900 architecture:
11, 21, 31, 41, 51, 61 or 71. The first digit identifies the slot number
the I/O board resides in, the second digit identifies the number of the port
on the I/O board.
In the CX 1000 architecture:
Accepts only the value '1'. The LAN module only supports 1 port per I/O
board. You distinguish between multiple I/O boards by specifying the slot
number of the I/O board using another object.
Default Value: 1ro INTEGER .1.3.6.1.4.1.495.2.1.6.17.1.1.1 |
cxCfgSrBasePortIfIndexDisplays the table row that contains configuration or monitoring objects
for a specific type of physical interface.
Range of Values: From 1 to the total number of entries in the
Interface Table.
Default Value: '0' indicates there is no corresponding entry in the
Interface Table for this port.ro INTEGER .1.3.6.1.4.1.495.2.1.6.17.1.1.2 |
cxCfgSrBasePortSubnetworkSapAliasSpecifies a name (alias) for the physical or convergence port to which this
SR port binds in order to establish a circuit for transmission. This value
must match a physical or convergence port's alias as defined by the object
cxLanIoPortAlias of the cxLanIoPortTable or by the object cxConvPortAlias of
the cxConvTable.
Range of Values: From 1 to 32 alphanumeric characters. You can use any
combination of letters and numbers however, you cannot use blank spaces.
Use a dash or underscore as a delimiter.
Default Value: LAN-PORT1
Configuration Changed: Administrativerw Alias .1.3.6.1.4.1.495.2.1.6.17.1.1.3 |
cxCfgSrBasePortRowStatusDetermines the status of the objects in a table row.
Options:
invalid (1): Row is flagged. After the next reset the values will be
disabled and the row will be deleted from the table.
valid (2): Values are enabled.
Default Value: (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.17.1.1.4 |
cxCfgSrBasePortStateDetermines the state of the SR port. You can control activity at the port
by changing this value.
Options:
on (1): The SR port is set to on.
off (2): The SR port is set to off.
OnToken (4): The Token Ring SR port will bind to IP.
Default Value: (1)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.17.1.1.5 |
cxCfgSrBasePortPriorityDetermines the filtering/forwarding action and the forwarding priority
for data sent from the SR bridge.
Options:
discard (1): Do not forward the data.
forward (2): Forward the data.
priority-low (3): Forward with a low priority (Frame Relay only).
priority-high (4): Forward with a high priority (Frame Relay only).
Default value: (2)
Configuration Changed: Administrativerw Enumeration .1.3.6.1.4.1.495.2.1.6.17.1.1.6 |