CXAtmDxi-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXAtmDxi-MIB.
50
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
RFC1155-SMIUsed to determine current MIB module release supported by agent. Object is in decimal.ro INTEGER .1.3.6.1.4.1.495.2.1.6.58.1 |
atmDxiTranslationDfaIts specification implies a translation request to the corresponding VPI/VCI pair, according to the translation mode specified by atmDxiTranslationMode. The result can be read from objects atmDxiTranslationVpi & atmDXiTranslationVci.rw DfaX .1.3.6.1.4.1.495.2.1.6.58.2 |
atmDxiTranslationVpiIts specification implies a translation request between the pair (VPI,VCI) into the corresponding DFA, according to the translation mode specified by atmDxiTranslationMode. The result can be read from object atmDxiTranslationDfa.rw Vpi .1.3.6.1.4.1.495.2.1.6.58.3 |
atmDxiTranslationVciIts specification implies a translation request between the pair (VPI,VCI) into the corresponding DFA, according to the translation mode specified by atmDxiTranslationMode. The result can be read from object atmDxiTranslationDfa.rw Vci .1.3.6.1.4.1.495.2.1.6.58.4 |
atmDxiTranslationModeDefines the mode used for translation between DFAs and the pair (VPI,VCI). The mode determines how many bytes are used to encode/decode DFAs or (VPI/VCI) pairs at their respective interface.rw Enumeration .1.3.6.1.4.1.495.2.1.6.58.5 |
atmDxiPSapTableA table containing information pertaining to one public service access point (PSAP). SEQUENCE OF AtmDxiPSapEntry .1.3.6.1.4.1.495.2.1.6.58.10 |
atmDxiPSapEntryDefines an entry in the Public Service Access Point group. AtmDxiPSapEntry .1.3.6.1.4.1.495.2.1.6.58.10.1 |
atmDxiPSapNumberIdentifies this PSAP (public service access point) with a numerical value. Values are unique per public service access point.
Value 0 is reserved for the PSAP and is non removable.ro PSapIndex .1.3.6.1.4.1.495.2.1.6.58.10.1.1 |
atmDxiPSapConnectTimerDetermines the number of seconds between attempts to establish a connection for a DXI to ATM circuit mapping. A connection is attempted only for defined non-connected routes.rw INTEGER .1.3.6.1.4.1.495.2.1.6.58.10.1.5 |
atmDxiPSapControlPermits control of a specific PSAP (public service access point).
Options:
clearStats (1): Clear all statistics stored by statistics objects.rw Enumeration .1.3.6.1.4.1.495.2.1.6.58.10.1.10 |
atmDxiPSapStateIndicates the current state of this PSAP (public service access point).
Options:
offline (1): Indicates a newly created public service access point whose configuration has not yet been sent to the ATM DXI layer.
connected (4): PSAP is connected and data flow can proceed.ro Enumeration .1.3.6.1.4.1.495.2.1.6.58.10.1.15 |
atmDxiPSapTxFramesIndicates the number of frames transmitted by this public service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.20 |
atmDxiPSapRxFramesIndicates the number of frames received by this public service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.21 |
atmDxiPSapTxOctetsIndicates the number of octets transmitted by this public service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.22 |
atmDxiPSapRxOctetsIndicates the number of octets received by this public service access point.ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.23 |
atmDxiPSapOutSuccessfullConnectsIndicates the number of successful outgoing connections established by this PSAP (public service access point). An outgoing connection is always attempted from the ATM DXI to the Inter-Application Module (IAM).ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.24 |
atmDxiPSapOutUnsuccessfullConnectsIndicates the number of unsuccessful outgoing connections attempted by this PSAP (public service access point). An outgoing connection is always attempted from the ATM DXI to the Inter-Application Module (IAM).ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.25 |
atmDxiPSapInConnectsReceivedIndicates the number of connect attempts received at this PSAP (public service access point). An incoming connection is always attempted from the Inter-Application Module (IAM) to ATM DXI.
The ATM DXI layer will always refuse such connection attempts.ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.26 |
atmDxiPSapTxResetsIndicates the number of reset frames sent by this PSAP (public service access point).ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.27 |
atmDxiPSapRxResetsIndicates the number of reset frames received by this PSAP (public service access point).ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.28 |
atmDxiPSapNoServiceDiscardsIndicates the number of frames received from the ATM protocol stack which have been discarded by this PSAP (public service access point) because:
- the DXI port is down.ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.35 |
atmDxiPSapCongestionDiscardsIndicates the number of received frames discarded due to system congestion.ro Counter .1.3.6.1.4.1.495.2.1.6.58.10.1.36 |
atmDxiSapTableA table containing information pertaining to one service access point (interface). SEQUENCE OF AtmDxiSapEntry .1.3.6.1.4.1.495.2.1.6.58.11 |
atmDxiSapEntryDefines an entry in the Service Access Point group. AtmDxiSapEntry .1.3.6.1.4.1.495.2.1.6.58.11.1 |
atmDxiSapModeDefines the DXI operating mode to be used at the service access point.rw Enumeration .1.3.6.1.4.1.495.2.1.6.58.11.1.5 |
atmDxiSapTransparentDfaIdentifies the DXI frame address to use when the associated sap is configured for the transparent mode of operation (object atmDxiSapMode, value 'modeTransparent').rw Dfa .1.3.6.1.4.1.495.2.1.6.58.11.1.6 |
atmDxiSapControlPermits control of this SAP (service access point).
Options:
clearStats (1): Clear all statistics stored by statistics objects maintained within the service access point table.rw Enumeration .1.3.6.1.4.1.495.2.1.6.58.11.1.10 |
atmDxiSapRxLmiFramesIndicates the number of DXI LMI (link management interface) frames received by this SAP.ro Counter .1.3.6.1.4.1.495.2.1.6.58.11.1.20 |
atmDxiSapNoRouteDiscardsIndicates the number of frames received from a DXI port which have been discarded by this SAP (service access point) because:
- no route was associated with the frame
- the frame was destined for a route that is not connected
- the associated ATM circuit is down.ro Counter .1.3.6.1.4.1.495.2.1.6.58.11.1.21 |
atmDxiSapRxInvalidDiscardsIndicates the following:
- number of incorrectly formatted DXI frames received by this SAP
- number of frames received whose length is less than the minimum acceptable
- number of frames received in error, as signaled by the lower layer. Such errors include:
- aborted frames
- frames with a bad CRC
- overrun frames
- frames with a non-integral number of bits
- frames that are longer than the lower layer is configured to accept.
- number of frames received while port is down.ro Counter .1.3.6.1.4.1.495.2.1.6.58.11.1.22 |
atmDxiSapCongestionDiscardsIndicates the number of received frames discarded at this SAP (service access point) due to system congestion.ro Counter .1.3.6.1.4.1.495.2.1.6.58.11.1.23 |
atmDxiSapFlowControlDiscardsIndicates the number of frames received from a DXI port which have been discarded by this SAP (service access point) because the associated route was flow controlled from the remote.ro Counter .1.3.6.1.4.1.495.2.1.6.58.11.1.24 |
atmDxiSysRouteTableA table containing associations between ATM DXI circuits at DXI ports, and ATM circuits at a UNI port.
Associations (routes) permit interconnectivity between the two types of circuits. SEQUENCE OF AtmDxiSysRouteEntry .1.3.6.1.4.1.495.2.1.6.58.12 |
atmDxiSysRouteEntryDefines an entry in the Route group. AtmDxiSysRouteEntry .1.3.6.1.4.1.495.2.1.6.58.12.1 |
atmDxiSRDxiFrameAddressIdentifies the DXI frame address which when combined with the ifIndex, uniquely identifies a DXI circuit.ro Dfa .1.3.6.1.4.1.495.2.1.6.58.12.1.1 |
atmDxiSRRowStatusDetermines the status of the objects in this row.
Options:
invalid (1): The row is deleted from the table immediately, however, values are still in effect until the next reset.
valid (2): Use this value to add a new row to the table, or modify an existing row.rw Enumeration .1.3.6.1.4.1.495.2.1.6.58.12.1.2 |
atmDxiSRDestAliasDetermines the textual name of the destination service this route connects to. When attempting a DXI circuit connection to an ATM circuit, this object specifies the name of the circuit at the ATM layer.
ATM DXI connections between 2 DXI cards within the same chassis is not provisioned for.
Range of Values: 1 -16 characters (first character must be a letter).rw Alias .1.3.6.1.4.1.495.2.1.6.58.12.1.3 |
atmDxiSRSubRefSpecifies a reference number that is used by layers supporting circuit consolidation, such as the FRIM, and must be unique for all routes sharing the same destination circuit at such layers.
The implementation of circuit consolidation onto a single ATM circuit is anticipated within the ATM Adaptation Layer (AAL5).
Range of Values: 1 - 255 (when connecting to a service supporting circuit consolidation)
0 (when not using circuit consolidation, or when connecting to a service that does not support its use.)rw SubRef .1.3.6.1.4.1.495.2.1.6.58.12.1.4 |
atmDxiSRRouteStateIndicates the status of this route.
Options:
offLine (1): Indicates that the ATM DXI SAP this route is associated with does not exist or is offline.
notConnected (2): Indicates that the remote destination does not exist, or has refused the connection.
inProgress (3): Indicates that the connection is in the process of being established. This is a transient state.
connected (4): Indicates that the connection is established and is ready for data transfer.
connectedFlowOff (5): Indicates that the connections is established but data flow has been stopped.ro Enumeration .1.3.6.1.4.1.495.2.1.6.58.12.1.10 |
atmDxiSRFailureReasonIndicates the status of a failed connection. The value of this object is only valid between attempts to establish the route connection atmDxiSRRouteState = notConnected), and may or may not change after successive failed attempts.
Options:
noFailure (1): Once a system route has been successfully connected, this value is maintained for the duration of the connection.
internalError (2): An internal error has occurred.
localAllocFailure (3): There is insufficient memory available for ATM DXI to establish this connection.
remoteAllocFailure (4): There is insufficient memory available for the destination protocol layer to establish this connection.
localNoAccess (5): This route is associated with a SAP that does not exist.
remoteNoAccess (6): This route is associated with a SAP that does not exist at the destination layer.
remotePvcDown (8): The PVC at the destination protocol layer is down.
remotePvcBusy (10): The destination associated with this route is already connected. This typically occurs when the route is a non-MPE (PVC consolidating) circuit.
localFcnFailure (11): Flow control negotiation failed.
remoteFcnFailure (12): Flow control negotiation failed at the destination protocol layer.
localDsnFailure (13): Data size negotiation failed.
remoteAliasNotFound (15): The destination alias (atmDxiSRDestAlias) does not exist.
remoteNoPvcService (16): The destination protocol layer does not support PVC service.
mpeInvalidSubref (17): The value of atmDxiSRSubRef is invalid at the destination protocol layer. (i.e., atmDxiSRSubRef is set to '0' and the destination circuit is configured for PVC consolidation).
routeStalled (18): An invalid control packet exchange has occurred during the route setup procedure. The route is temporarily stalled but will recover within 5 seconds.ro Enumeration .1.3.6.1.4.1.495.2.1.6.58.12.1.11 |
atmDxiSysRouteStatsTableA table containing statistics for established routes in the route table. SEQUENCE OF AtmDxiSysRouteStatsEntry .1.3.6.1.4.1.495.2.1.6.58.13 |
atmDxiSysRouteStatsEntryDefines an entry in the Route Statistics group. AtmDxiSysRouteStatsEntry .1.3.6.1.4.1.495.2.1.6.58.13.1 |
atmDxiSRStatsDxiFrameAddressIdentifies the DXI frame address, which when combined with the ifIndex, uniquely identifies a DXI circuit.ro Dfa .1.3.6.1.4.1.495.2.1.6.58.13.1.1 |
atmDxiSRStatsCreationTimeIndicates the system clock's time at which this connection was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.495.2.1.6.58.13.1.2 |
atmDxiSRStatsNegotiatedDataSizeIndicates the data size of a frame negotiated at connection.ro INTEGER .1.3.6.1.4.1.495.2.1.6.58.13.1.3 |
atmDxiSRStatsTxFramesIndicates the number of frames transmitted by this connection.ro Counter .1.3.6.1.4.1.495.2.1.6.58.13.1.4 |
atmDxiSRStatsRxFramesIndicates the number of frames received by this connection.ro Counter .1.3.6.1.4.1.495.2.1.6.58.13.1.5 |
atmDxiSRStatsTxOctetsIndicates the number of octets transmitted by this connection.ro Counter .1.3.6.1.4.1.495.2.1.6.58.13.1.6 |
atmDxiSRStatsRxOctetsIndicates the number of octets received by this connection.ro Counter .1.3.6.1.4.1.495.2.1.6.58.13.1.7 |
atmDxiSRStatsFlowControlDiscardsIndicates the number of frames which were destined for this route but were discarded due to flow control from the remote.ro Counter .1.3.6.1.4.1.495.2.1.6.58.13.1.8 |