CXACTE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CXACTE-MIB.
11
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
IMPORTSThe DS1 debug table. SEQUENCE OF ActeDebugEntry .1.3.6.1.4.1.495.2.1.8.1.30 |
acteDebugEntryAn entry in the DS1 Debug Table. ActeDebugEntry .acteDebugTable.1 |
acteDebugLinkIndexIdentifies the T1/E1 (DS1) interface port.ro INTEGER .acteDebugTable.1.1 |
acteDebugIndexThe index value uniquely identifies the T1/E1 (DS0) channel
for which these table entries are applicable.ro INTEGER .acteDebugTable.1.2 |
acteDebugRegisterDetermines which register on the T1/E1 I/O card will be affected
by the 'read' or 'write' operation initiated by the
acteDebugOperation object.rw DisplayString .acteDebugTable.1.10 |
acteDebugResultIndicates the values of each of the 8 registers following the
address specified for the acteDebugRegister object following a
'get' command.ro DisplayString .acteDebugTable.1.50 |
acteDebugWriteDetermines the value to be written to the T1/E1 I/O card
register specified by the acteDebugRegister object. The command
is activated by entering a value in this object.rw DisplayString .acteDebugTable.1.80 |
acteDebugTvdStatThis object displays the statistics relative to this TVD
control block for the specified DS0 channel on the specified
DVC card which corresponds to acteDebugCfgIndex.
If acteDebugTvdStat is set to 1, nothing occurs, 2 displays
the debugging information and 3 clears the counters.rw INTEGER .acteDebugTable.1.81 |
acteDebugDs1StatThis object displays the statistics relative to this DS1
control block. When acteDebugIndex is set to 1, it displays
the port information, 2 displays the counter information for
channels 0 to 14 and 3 displays the counter information for
channels 15 to 29. If acteDebugDs1Stat is set to 1, nothing
occurs, 2 displays the debugging information and 3 clears
the counters.rw INTEGER .acteDebugTable.1.82 |
acteDebugSvdStatThis object displays the statistics relative to this SVD
control block for the specified DS0 channel specified by
acteDebugIndex. If acteDebugSvdStat is set to 1, nothing
occurs, 2 displays the debugging information and 3 clears
the counters.rw INTEGER .acteDebugTable.1.83 |
acteDebugSvdEvtThis object displays the timestamps concerning particular
events relative to this TVD control block for the specified
DS0 channel specified by acteDebugIndex. If acteDebugSvdEvt
is set to 1, nothing occurs, 2 displays the debugging
information and 3 clears the counters.rw INTEGER .acteDebugTable.1.84 |