CTTRAPLOG-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CTTRAPLOG-MIB.
35
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
RFC1155-SMITotal number of logged entries for this chassis.ro INTEGER .1.3.6.1.4.1.52.4.1.44.1 |
configTable SEQUENCE OF ConfigTableEntry .1.3.6.1.4.1.52.4.1.44.2 |
configTableEntryEach entry allows a user to configure the alarm table
for a specific slot. Objects such as Current Entry,
MaxEntries Allowed, and an Enable/Disable switch are
available. ConfigTableEntry .1.3.6.1.4.1.52.4.1.44.2.1 |
slotInChassisEach Slot can be separately configured. This is the
slot number for the configuration entry.ro INTEGER .1.3.6.1.4.1.52.4.1.44.2.1.1 |
numEntriesLoggedsThis is the total number of entries looged for this
slot.ro Counter .1.3.6.1.4.1.52.4.1.44.2.1.2 |
numEntriesRequestedMaximum number of entries to store before wrapping
the log on this slot.rw INTEGER .1.3.6.1.4.1.52.4.1.44.2.1.3 |
numEntriesAllocatedThis is the number of entries allocated to log alarms
on this slot. It will always be less than or equal
to the requested number of entries.ro INTEGER .1.3.6.1.4.1.52.4.1.44.2.1.4 |
lastLoggedEntryLogIdThis is the log id of the last entry logged for this
slot.ro INTEGER .1.3.6.1.4.1.52.4.1.44.2.1.5 |
logCommandAllows the user to send the log the commands
specified in the enumeration.rw Enumeration .1.3.6.1.4.1.52.4.1.44.2.1.6 |
wrapThis is whether or not this configuration has
wrapped or not.ro INTEGER .1.3.6.1.4.1.52.4.1.44.2.1.7 |
trapLogTable SEQUENCE OF TrapLogEntry .1.3.6.1.4.1.52.4.1.44.3 |
trapLogEntryEach alarm entry is generated from one of the
following sources; (1) a module in one of the main
chassis slots, (2) the EM, (3) or a power supply. TrapLogEntry .1.3.6.1.4.1.52.4.1.44.3.1 |
logIdEach slot has a maximium number of log entries that it
can support. Each entry is assigned a monotonically
increasing sequence number. When the maximum number
of entries for a slot is reached, the log wraps. Each
new entry will replace the oldest entry for that slot.ro INTEGER .1.3.6.1.4.1.52.4.1.44.3.1.1 |
nvmpIdThis contains the nvmp id of the trap that occurred.ro INTEGER .1.3.6.1.4.1.52.4.1.44.3.1.2 |
trapLogAcknowledgedThis field is set to 2 if a trap as been acknowledged
from the EM.ro INTEGER .1.3.6.1.4.1.52.4.1.44.3.1.3 |
trapLogVarBindThis is an ASN.1 encoded string representing the pairs
of OID/value items supplied in the original SNMP or
NVMP trap.ro OCTET STRING .1.3.6.1.4.1.52.4.1.44.3.1.4 |
trapLogDescriptionThis is an internally defined string used to describe
an alarm. Its primary use is for display on the EMs
LCD. A default value will be used for the old trap
calls.ro DisplayString .1.3.6.1.4.1.52.4.1.44.3.1.5 |
timeLoggedThe time the entry was logged. This will be date and
time if possible.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.44.3.1.6 |
filterIdThis will be used to filter certain alarms. The
criteria is TBD. An example of classification:
informational - requires no intervention. warning -
Does not require immediate intervention. e.g. static
risk severe - Requires immediate intervention. e.g.
power overload. fatal - Requires attention and
module may take corrective action such as reboot. e.g.
Unrecoverable software or hardware error.ro Enumeration .1.3.6.1.4.1.52.4.1.44.3.1.7 |
slotChassisSlot of this trap log.ro INTEGER .1.3.6.1.4.1.52.4.1.44.3.1.8 |
trapOIDThis OID combines the General Trap code, Specific
Trap code, and the sys object id into one OID.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.44.3.1.9 |
z80TimeThis is the time that the Z80 has been up for the
board that sent this trap.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.44.3.1.10 |
filterTable SEQUENCE OF FilterEntry .1.3.6.1.4.1.52.4.1.44.4 |
filterEntryEach filter entry is generated from one of the
following sources; (1) a module in one of the main
chassis slots, (2) the EM, (3) or a power supply. FilterEntry .1.3.6.1.4.1.52.4.1.44.4.1 |
filterLogIdEach slot has a maximum number of log entries that it
can support. Each entry is assigned a monotonically
increasing sequence number. When the maximum number of
entries for a slot is reached, the log wraps. Each new
entry willreplace the oldest entry for that slot.ro INTEGER .1.3.6.1.4.1.52.4.1.44.4.1.1 |
filterNvmpIdThis contains the nvmp id of the trap that was
generated.ro INTEGER .1.3.6.1.4.1.52.4.1.44.4.1.2 |
filterTrapLogAcknowledgedThis field is non-zero if a trap has been acknowleged
from the EM.ro INTEGER .1.3.6.1.4.1.52.4.1.44.4.1.3 |
filterTrapLogVarBindThis is an ASN.1 encoded string representing the pairs
of OID/value items supplied in the original SNMP or
NVMP trap.ro OCTET STRING .1.3.6.1.4.1.52.4.1.44.4.1.4 |
filterTrapLogDescriptionThis is an internally defined string used to
describe an alarm. It's primary use is for display
on the EMs LCD. A default value will be used for
the old trap calls.ro DisplayString .1.3.6.1.4.1.52.4.1.44.4.1.5 |
filterTimeLoggedThe time the entry was logged. This will be date
and time if possible.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.44.4.1.6 |
filterFilterIdThis will be used tofilter certain alarms. The
criteria is TBD. An example of classification:
informational-requires no intervention. warning -
Does not require immediate intervention. e.g.
statis risk severe - Requires immediate
intervention. e.g. power overload. fatal -
Requires attention and module may take
corrective action such as reboot. e.g. Unrecoverale
software or hardware error.ro Enumeration .1.3.6.1.4.1.52.4.1.44.4.1.7 |
filterSlotInChassisSlot of this filter entry.ro INTEGER .1.3.6.1.4.1.52.4.1.44.4.1.8 |
filterTrapOIDThis OID combines the General Trap code, Specific
Trap code, and the sys object id into one OID.ro OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.44.4.1.9 |
filterZ80TimeThe number of time ticks that have passed since
this boards Z80 processor has been up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52.4.1.44.4.1.10 |
trapLoggerAgentReflects the operational status of the traplogger agentrw Enumeration .1.3.6.1.4.1.52.4.1.44.5 |