CTRON-WAN-IMUX-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CTRON-WAN-IMUX-MIB.
21
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
ctWanMux OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.7.3.1 |
IMPORTS Unknown .1.3.6.1.4.1.52.4.1.2.7.3.1 |
ctWANMuxGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.52.4.1.2.7.3.1.1 |
ctWANMuxMaxNumGroupsGet the maximum number of Inverse Multiplexer groups
allowed to be programmed for this device. This value
is the number of physical WAN connections, divided by
the minimum number of channels for a single mux
to be operational (2). However, some devices may only
support a single inverse multiplexer group.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.1.1 |
ctWanMuxAdminUsed to enable and disable the Inverse Multiplexer
Application. This object is used to enable/disable
Inverse Multiplexing for the entire device. Inverse
Multiplexer Groups may be enabled/disabled independently
using ctWanMuxGroupAdmin. This object must be set to
enabled for any inverse multiplexing to occur on the
device.rw Enumeration .1.3.6.1.4.1.52.4.1.2.7.3.1.1.2 |
ctWanMuxGroupTableInformation describing the configured parameters
of one of the Inverse Multiplexer groups. SEQUENCE OF CtWanMuxGroupEntry .1.3.6.1.4.1.52.4.1.2.7.3.1.2 |
ctWanMuxGroupEntryA description of a single Inverse Multiplexer group
entry. CtWanMuxGroupEntry .1.3.6.1.4.1.52.4.1.2.7.3.1.2.1 |
ctWanMuxGroupIdA unique value identifying an element in a sequence of
groups which belong to the WAN Inverse Multiplexer.
This value ranges from 1 to the maximum number of
programmable groups as described by
ctWANMuxMaxNumGroups.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.2.1.1 |
ctWanMuxGroupAdminUsed to enable and disable an Inverse Multiplexer
group which evenly distributes data traffic in a
properly sequenced fashion, over two or more single
channel Wide Area Network connections such as DS1,
E1, DDS, or SYNC. Each of the single channel
connections must be configured with an appropriate
datalink protocol. A minimum of two channels, each
assigned to it's own physical interface, is required
before the Inverse Multiplexer group can be enabled.rw Enumeration .1.3.6.1.4.1.52.4.1.2.7.3.1.2.1.2 |
ctWanMuxGroupNumChannelsGet the number of channels currently
associated with this Inverse Multiplexer group. A
minimum of two channels, each assigned to it's own
physical interface, is required before the Inverse
Multiplexer group can be enabled.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.2.1.3 |
ctWanMuxGroupAddChannelAdd a channel to the channel list used by this Inverse
Multiplexer group. Before a channel is added, the
channel must be assigned a MIB II ifindex, and an
acceptable Datalink Protocol. When this object is set,
it is set with the ifindex value. This object is always
read as a 1.rw INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.2.1.4 |
ctWanMuxGroupDelChannelDelete a channel to the channel list used by this
Inverse Multiplexer group. Before a channel is
deleted, the channel must exist in the Inverse
Multiplexer group's channel table. When this object
is set, it is set with the ifindex value of the channel
the user wishes to delete from the channel table. This
object is always read as a 1.rw INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.2.1.5 |
ctWanMuxChannelTableTable containing ifindex values, representing WAN
channels, used by the Inverse Multiplexer. The table
also contains statistics reported about each channel. SEQUENCE OF CtWanMuxChannelEntry .1.3.6.1.4.1.52.4.1.2.7.3.1.3 |
ctWanMuxChannelEntryA description of a single entry. CtWanMuxChannelEntry .1.3.6.1.4.1.52.4.1.2.7.3.1.3.1 |
ctWanMuxChannelGroupIdA unique value identifying an element in a sequence
of groups which belong to the WAN Inverse Multiplexer.
This value ranges from 1 to the maximum number of
programmable groups as described by
ctWANMuxMaxNumGroups.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.3.1.1 |
ctWanMuxChannelIdA unique value identifying an element in a sequence of
member channel ifindex values which belong to a WAN
Inverse Multiplexer group.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.3.1.2 |
ctWanMuxChannelIfIndexReturns an ifindex associated with a WAN
channel used for Inverse Multiplexing.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.3.1.3 |
ctWanMuxChannelPhysNumReturns a unique physical connection identifier
associated with this channel's physical WAN
connection.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.3.1.4 |
ctWanMuxChannelBwAvailReturns a value which represents the available
bandwidth for transmitting data existing for the
physical WAN connection associated with this channel.
The value is represented in bits/sec.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.3.1.5 |
ctWanMuxChannelByteCountReturns a value which represents a cumulative count
of bytes transmitted out from this interface. The
count includes any bytes transmitted across the
physical medium, less physical medium framing.ro INTEGER .1.3.6.1.4.1.52.4.1.2.7.3.1.3.1.6 |
ctWanMuxChannelStatusReturns the current status of the channel associated
with an inverse multiplexer group. The channel is
active when the group admin status is enabled, and
the channel is operational. The channel is inactive
when either the group admin status is disabled, or
the channel is not operational.ro Enumeration .1.3.6.1.4.1.52.4.1.2.7.3.1.3.1.7 |